[PATCH v7 3/5] Documentation: Add documentation for the APM X-Gene SoC EDAC DTS binding

[bp@alien8.de (Borislav Petkov)]

On Thu, Apr 30, 2015 at 12:42:48PM +0200, Arnd Bergmann wrote:
> I've looked at the driver in a little more detail now, and found that
> it is a weird conglomerate at the moment. Basically you have four
> drivers in one file here, appended to one another, but not sharing
> any common functions except the module_init() that registers the four
> drivers. This is what Rob was referring to when he suggested splitting
> it up into four files, and these would in total be smaller than the
> common file (by being able to use module_platform_driver()).
> 
> However, there is another dimension to this, which supports your point
> about making it one driver for the platform: The split into four drivers
> is completely artificial, because all four use the same IRQs and
> implement four separate interrupt handlers for it (using IRQF_SHARED),
> each handling only the events they are interested in. Similarly, they
> all access the same register set ("pcperror"), aside from having their
> own separate registers, and they use the "syscon" framework to get to
> the registers.  This seems to be an inferior design, as the pcperror

Doh, now that you mention it...

So why isn't this thing registering a single IRQ handler which
multiplexes between the _check routines depending on the bits set in
PCPHPERRINTSTS/MEMERRINTSTS? (L3 alternatively, ctx->dev_csr + L3C_ESR).

This would really make it a single driver which acts according to the
bits set in those error registers. It can't get any simpler than that.

Loc?

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.
--