From: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
To: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Cc: "Benoît Cousson"
<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Matt Gessner"
<Matt.Gessner-CWA4WttNNZF54TAoqtyWWQ@public.gmane.org>,
"Suman Anna" <s-anna-l0cyMroinI0@public.gmane.org>
Subject: Re: [PATCH] ARM: dts: dra7: Fix efuse register size for ABB
Date: Mon, 4 May 2015 09:26:09 -0700 [thread overview]
Message-ID: <20150504162609.GN24469@atomide.com> (raw)
In-Reply-To: <1429221394-18896-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
* Nishanth Menon <nm-l0cyMroinI0@public.gmane.org> [150416 14:57]:
> Fix a typo in DRA7 dtsi where 12 bytes are needed for register
> description of ABB efuse registers, however only 8 bytes are provided
> to map. For some weird reason, this does not generate abort at offset
> 0x8, probably due to default maps already provided in io.c for the bus
> register ranges.
>
> Reported-by: Matt Gessner <Matt.Gessner-CWA4WttNNZF54TAoqtyWWQ@public.gmane.org>
> Reported-by: Suman Anna <s-anna-l0cyMroinI0@public.gmane.org>
> Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Applying into omap-for-v4.1/fixes thanks.
Tony
> ---
> arch/arm/boot/dts/dra7.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 5332b57b4950..92b8bb873f43 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -911,7 +911,7 @@
> ti,clock-cycles = <16>;
>
> reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
> - <0x4ae06014 0x4>, <0x4a003b20 0x8>,
> + <0x4ae06014 0x4>, <0x4a003b20 0xc>,
> <0x4ae0c158 0x4>;
> reg-names = "setup-address", "control-address",
> "int-address", "efuse-address",
> @@ -944,7 +944,7 @@
> ti,clock-cycles = <16>;
>
> reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
> - <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
> + <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
> <0x4a002470 0x4>;
> reg-names = "setup-address", "control-address",
> "int-address", "efuse-address",
> @@ -977,7 +977,7 @@
> ti,clock-cycles = <16>;
>
> reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
> - <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
> + <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
> <0x4a00246c 0x4>;
> reg-names = "setup-address", "control-address",
> "int-address", "efuse-address",
> @@ -1010,7 +1010,7 @@
> ti,clock-cycles = <16>;
>
> reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
> - <0x4ae06010 0x4>, <0x4a003b08 0x8>,
> + <0x4ae06010 0x4>, <0x4a003b08 0xc>,
> <0x4ae0c154 0x4>;
> reg-names = "setup-address", "control-address",
> "int-address", "efuse-address",
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: dra7: Fix efuse register size for ABB
Date: Mon, 4 May 2015 09:26:09 -0700 [thread overview]
Message-ID: <20150504162609.GN24469@atomide.com> (raw)
In-Reply-To: <1429221394-18896-1-git-send-email-nm@ti.com>
* Nishanth Menon <nm@ti.com> [150416 14:57]:
> Fix a typo in DRA7 dtsi where 12 bytes are needed for register
> description of ABB efuse registers, however only 8 bytes are provided
> to map. For some weird reason, this does not generate abort at offset
> 0x8, probably due to default maps already provided in io.c for the bus
> register ranges.
>
> Reported-by: Matt Gessner <Matt.Gessner@windriver.com>
> Reported-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
Applying into omap-for-v4.1/fixes thanks.
Tony
> ---
> arch/arm/boot/dts/dra7.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 5332b57b4950..92b8bb873f43 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -911,7 +911,7 @@
> ti,clock-cycles = <16>;
>
> reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
> - <0x4ae06014 0x4>, <0x4a003b20 0x8>,
> + <0x4ae06014 0x4>, <0x4a003b20 0xc>,
> <0x4ae0c158 0x4>;
> reg-names = "setup-address", "control-address",
> "int-address", "efuse-address",
> @@ -944,7 +944,7 @@
> ti,clock-cycles = <16>;
>
> reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
> - <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
> + <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
> <0x4a002470 0x4>;
> reg-names = "setup-address", "control-address",
> "int-address", "efuse-address",
> @@ -977,7 +977,7 @@
> ti,clock-cycles = <16>;
>
> reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
> - <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
> + <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
> <0x4a00246c 0x4>;
> reg-names = "setup-address", "control-address",
> "int-address", "efuse-address",
> @@ -1010,7 +1010,7 @@
> ti,clock-cycles = <16>;
>
> reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
> - <0x4ae06010 0x4>, <0x4a003b08 0x8>,
> + <0x4ae06010 0x4>, <0x4a003b08 0xc>,
> <0x4ae0c154 0x4>;
> reg-names = "setup-address", "control-address",
> "int-address", "efuse-address",
> --
> 1.7.9.5
>
WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com>
To: Nishanth Menon <nm@ti.com>
Cc: "Benoît Cousson" <bcousson@baylibre.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-omap@vger.kernel.org,
"Matt Gessner" <Matt.Gessner@windriver.com>,
"Suman Anna" <s-anna@ti.com>
Subject: Re: [PATCH] ARM: dts: dra7: Fix efuse register size for ABB
Date: Mon, 4 May 2015 09:26:09 -0700 [thread overview]
Message-ID: <20150504162609.GN24469@atomide.com> (raw)
In-Reply-To: <1429221394-18896-1-git-send-email-nm@ti.com>
* Nishanth Menon <nm@ti.com> [150416 14:57]:
> Fix a typo in DRA7 dtsi where 12 bytes are needed for register
> description of ABB efuse registers, however only 8 bytes are provided
> to map. For some weird reason, this does not generate abort at offset
> 0x8, probably due to default maps already provided in io.c for the bus
> register ranges.
>
> Reported-by: Matt Gessner <Matt.Gessner@windriver.com>
> Reported-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
Applying into omap-for-v4.1/fixes thanks.
Tony
> ---
> arch/arm/boot/dts/dra7.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 5332b57b4950..92b8bb873f43 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -911,7 +911,7 @@
> ti,clock-cycles = <16>;
>
> reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
> - <0x4ae06014 0x4>, <0x4a003b20 0x8>,
> + <0x4ae06014 0x4>, <0x4a003b20 0xc>,
> <0x4ae0c158 0x4>;
> reg-names = "setup-address", "control-address",
> "int-address", "efuse-address",
> @@ -944,7 +944,7 @@
> ti,clock-cycles = <16>;
>
> reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
> - <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
> + <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
> <0x4a002470 0x4>;
> reg-names = "setup-address", "control-address",
> "int-address", "efuse-address",
> @@ -977,7 +977,7 @@
> ti,clock-cycles = <16>;
>
> reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
> - <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
> + <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
> <0x4a00246c 0x4>;
> reg-names = "setup-address", "control-address",
> "int-address", "efuse-address",
> @@ -1010,7 +1010,7 @@
> ti,clock-cycles = <16>;
>
> reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
> - <0x4ae06010 0x4>, <0x4a003b08 0x8>,
> + <0x4ae06010 0x4>, <0x4a003b08 0xc>,
> <0x4ae0c154 0x4>;
> reg-names = "setup-address", "control-address",
> "int-address", "efuse-address",
> --
> 1.7.9.5
>
next prev parent reply other threads:[~2015-05-04 16:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-16 21:56 [PATCH] ARM: dts: dra7: Fix efuse register size for ABB Nishanth Menon
2015-04-16 21:56 ` Nishanth Menon
2015-04-16 21:56 ` Nishanth Menon
[not found] ` <1429221394-18896-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
2015-05-04 16:26 ` Tony Lindgren [this message]
2015-05-04 16:26 ` Tony Lindgren
2015-05-04 16:26 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150504162609.GN24469@atomide.com \
--to=tony-4v6ys6ai5vpbdgjk7y7tuq@public.gmane.org \
--cc=Matt.Gessner-CWA4WttNNZF54TAoqtyWWQ@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=nm-l0cyMroinI0@public.gmane.org \
--cc=s-anna-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.