From: Michael Turquette <mturquette@linaro.org>
To: Jim Quinlan <jim2101024@gmail.com>, linux-clk@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com,
"Jim Quinlan" <jim2101024@gmail.com>
Subject: Re: [PATCH] clk: allow a clk divider with max divisor when zero
Date: Sat, 23 May 2015 12:17:50 -0700 [thread overview]
Message-ID: <20150523191750.9817.78709@quantum> (raw)
In-Reply-To: <1431719147-10153-1-git-send-email-jim2101024@gmail.com>
Quoting Jim Quinlan (2015-05-15 12:45:47)
> This commit allows certain Broadcom STB clock dividers to be used with
> clk-divider.c. It allows for a clock whose field value is the equal
> to the divisor, execpt when the field value is zero, in which case the
> divisor is 2^width. For example, consider a divisor clock with a two
> bit field:
> =
> value divisor
> 0 4
> 1 1
> 2 2
> 3 3
Hi Jim,
Instead of introducing this flag, could you use the divider table? New
stuff is generally added to clk-divider.c when it is common and used by
multiple platforms. If this is not the case then using a table-based
approach is a nice solution.
Regards,
Mike
> =
> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
> ---
> drivers/clk/clk-divider.c | 16 +++++++++++-----
> include/linux/clk-provider.h | 4 ++++
> 2 files changed, 15 insertions(+), 5 deletions(-)
> =
> diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
> index 25006a8..fce0d8b 100644
> --- a/drivers/clk/clk-divider.c
> +++ b/drivers/clk/clk-divider.c
> @@ -78,12 +78,14 @@ static unsigned int _get_table_div(const struct clk_d=
iv_table *table,
> }
> =
> static unsigned int _get_div(const struct clk_div_table *table,
> - unsigned int val, unsigned long flags)
> + unsigned int val, unsigned long flags, u8 wi=
dth)
> {
> if (flags & CLK_DIVIDER_ONE_BASED)
> return val;
> if (flags & CLK_DIVIDER_POWER_OF_TWO)
> return 1 << val;
> + if (flags & CLK_DIVIDER_MAX_AT_ZERO)
> + return val ? val : div_mask(width) + 1;
> if (table)
> return _get_table_div(table, val);
> return val + 1;
> @@ -101,12 +103,14 @@ static unsigned int _get_table_val(const struct clk=
_div_table *table,
> }
> =
> static unsigned int _get_val(const struct clk_div_table *table,
> - unsigned int div, unsigned long flags)
> + unsigned int div, unsigned long flags, u8 wi=
dth)
> {
> if (flags & CLK_DIVIDER_ONE_BASED)
> return div;
> if (flags & CLK_DIVIDER_POWER_OF_TWO)
> return __ffs(div);
> + if (flags & CLK_DIVIDER_MAX_AT_ZERO)
> + return (div =3D=3D div_mask(width) + 1) ? 0 : div;
> if (table)
> return _get_table_val(table, div);
> return div - 1;
> @@ -117,9 +121,10 @@ unsigned long divider_recalc_rate(struct clk_hw *hw,=
unsigned long parent_rate,
> const struct clk_div_table *table,
> unsigned long flags)
> {
> + struct clk_divider *divider =3D to_clk_divider(hw);
> unsigned int div;
> =
> - div =3D _get_div(table, val, flags);
> + div =3D _get_div(table, val, flags, divider->width);
> if (!div) {
> WARN(!(flags & CLK_DIVIDER_ALLOW_ZERO),
> "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not =
set\n",
> @@ -351,7 +356,8 @@ static long clk_divider_round_rate(struct clk_hw *hw,=
unsigned long rate,
> if (divider->flags & CLK_DIVIDER_READ_ONLY) {
> bestdiv =3D readl(divider->reg) >> divider->shift;
> bestdiv &=3D div_mask(divider->width);
> - bestdiv =3D _get_div(divider->table, bestdiv, divider->fl=
ags);
> + bestdiv =3D _get_div(divider->table, bestdiv, divider->fl=
ags,
> + divider->width);
> return DIV_ROUND_UP(*prate, bestdiv);
> }
> =
> @@ -370,7 +376,7 @@ int divider_get_val(unsigned long rate, unsigned long=
parent_rate,
> if (!_is_valid_div(table, div, flags))
> return -EINVAL;
> =
> - value =3D _get_val(table, div, flags);
> + value =3D _get_val(table, div, flags, width);
> =
> return min_t(unsigned int, value, div_mask(width));
> }
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index df69531..a30c24c 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -342,6 +342,9 @@ struct clk_div_table {
> * to the closest integer instead of the up one.
> * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and sh=
ould
> * not be changed by the clock framework.
> + * CLK_DIVIDER_MAX_AT_ZERO - For dividers which are like CLK_DIVIDER_ONE=
_BASED
> + * except when the value read from the register is zero, the divisor=
is
> + * 2^width of the field.
> */
> struct clk_divider {
> struct clk_hw hw;
> @@ -359,6 +362,7 @@ struct clk_divider {
> #define CLK_DIVIDER_HIWORD_MASK BIT(3)
> #define CLK_DIVIDER_ROUND_CLOSEST BIT(4)
> #define CLK_DIVIDER_READ_ONLY BIT(5)
> +#define CLK_DIVIDER_MAX_AT_ZERO BIT(6)
> =
> extern const struct clk_ops clk_divider_ops;
> =
> -- =
> 1.9.0.138.g2de3478
>=20
next prev parent reply other threads:[~2015-05-23 19:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-15 19:45 [PATCH] clk: allow a clk divider with max divisor when zero Jim Quinlan
2015-05-23 19:17 ` Michael Turquette [this message]
2015-05-26 14:43 ` Jim Quinlan
2015-07-23 19:16 ` Michael Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150523191750.9817.78709@quantum \
--to=mturquette@linaro.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=jim2101024@gmail.com \
--cc=linux-clk@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.