All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Turquette <mturquette@linaro.org>
To: Jim Quinlan <jim2101024@gmail.com>,
Cc: linux-clk@vger.kernel.org,  bcm-kernel-feedback-list@broadcom.com
Subject: Re: [PATCH] clk: allow a clk divider with max divisor when zero
Date: Thu, 23 Jul 2015 12:16:43 -0700	[thread overview]
Message-ID: <20150723191643.642.47769@quantum> (raw)
In-Reply-To: <CANCKTBsKYikUquheryHA=618sgQ5gd0-h3qTosxyA-XZjjodOQ@mail.gmail.com>

Quoting Jim Quinlan (2015-05-26 07:43:35)
> Hi Mike,
> =

> I don't think using a table approach is acceptable.  First, a number
> of our dividers have an eight bit value field.  Second, we do not
> necessarily know a priori which of the 256 settings will be chosen:
> we could make a table with the N most popular choices, and then
> someone -- possibly in app-land -- may decide they want a different
> frequency for necessity, power savings, reliability, whatever.  They
> want to make this change immediately and cannot wait for us to produce
> and QA another device tree with the new table.

Applied to clk-next.

Regards,
Mike

> =

> Regards,
> Jim
> =

> On Sat, May 23, 2015 at 3:17 PM, Michael Turquette
> <mturquette@linaro.org> wrote:
> > Quoting Jim Quinlan (2015-05-15 12:45:47)
> >> This commit allows certain Broadcom STB clock dividers to be used with
> >> clk-divider.c.  It allows for a clock whose field value is the equal
> >> to the divisor, execpt when the field value is zero, in which case the
> >> divisor is 2^width.  For example, consider a divisor clock with a two
> >> bit field:
> >>
> >> value           divisor
> >> 0               4
> >> 1               1
> >> 2               2
> >> 3               3
> >
> > Hi Jim,
> >
> > Instead of introducing this flag, could you use the divider table? New
> > stuff is generally added to clk-divider.c when it is common and used by
> > multiple platforms. If this is not the case then using a table-based
> > approach is a nice solution.
> >
> > Regards,
> > Mike
> >
> >>
> >> Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
> >> ---
> >>  drivers/clk/clk-divider.c    | 16 +++++++++++-----
> >>  include/linux/clk-provider.h |  4 ++++
> >>  2 files changed, 15 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
> >> index 25006a8..fce0d8b 100644
> >> --- a/drivers/clk/clk-divider.c
> >> +++ b/drivers/clk/clk-divider.c
> >> @@ -78,12 +78,14 @@ static unsigned int _get_table_div(const struct cl=
k_div_table *table,
> >>  }
> >>
> >>  static unsigned int _get_div(const struct clk_div_table *table,
> >> -                            unsigned int val, unsigned long flags)
> >> +                            unsigned int val, unsigned long flags, u8=
 width)
> >>  {
> >>         if (flags & CLK_DIVIDER_ONE_BASED)
> >>                 return val;
> >>         if (flags & CLK_DIVIDER_POWER_OF_TWO)
> >>                 return 1 << val;
> >> +       if (flags & CLK_DIVIDER_MAX_AT_ZERO)
> >> +               return val ? val : div_mask(width) + 1;
> >>         if (table)
> >>                 return _get_table_div(table, val);
> >>         return val + 1;
> >> @@ -101,12 +103,14 @@ static unsigned int _get_table_val(const struct =
clk_div_table *table,
> >>  }
> >>
> >>  static unsigned int _get_val(const struct clk_div_table *table,
> >> -                            unsigned int div, unsigned long flags)
> >> +                            unsigned int div, unsigned long flags, u8=
 width)
> >>  {
> >>         if (flags & CLK_DIVIDER_ONE_BASED)
> >>                 return div;
> >>         if (flags & CLK_DIVIDER_POWER_OF_TWO)
> >>                 return __ffs(div);
> >> +       if (flags & CLK_DIVIDER_MAX_AT_ZERO)
> >> +               return (div =3D=3D div_mask(width) + 1) ? 0 : div;
> >>         if (table)
> >>                 return  _get_table_val(table, div);
> >>         return div - 1;
> >> @@ -117,9 +121,10 @@ unsigned long divider_recalc_rate(struct clk_hw *=
hw, unsigned long parent_rate,
> >>                                   const struct clk_div_table *table,
> >>                                   unsigned long flags)
> >>  {
> >> +       struct clk_divider *divider =3D to_clk_divider(hw);
> >>         unsigned int div;
> >>
> >> -       div =3D _get_div(table, val, flags);
> >> +       div =3D _get_div(table, val, flags, divider->width);
> >>         if (!div) {
> >>                 WARN(!(flags & CLK_DIVIDER_ALLOW_ZERO),
> >>                         "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO n=
ot set\n",
> >> @@ -351,7 +356,8 @@ static long clk_divider_round_rate(struct clk_hw *=
hw, unsigned long rate,
> >>         if (divider->flags & CLK_DIVIDER_READ_ONLY) {
> >>                 bestdiv =3D readl(divider->reg) >> divider->shift;
> >>                 bestdiv &=3D div_mask(divider->width);
> >> -               bestdiv =3D _get_div(divider->table, bestdiv, divider-=
>flags);
> >> +               bestdiv =3D _get_div(divider->table, bestdiv, divider-=
>flags,
> >> +                       divider->width);
> >>                 return DIV_ROUND_UP(*prate, bestdiv);
> >>         }
> >>
> >> @@ -370,7 +376,7 @@ int divider_get_val(unsigned long rate, unsigned l=
ong parent_rate,
> >>         if (!_is_valid_div(table, div, flags))
> >>                 return -EINVAL;
> >>
> >> -       value =3D _get_val(table, div, flags);
> >> +       value =3D _get_val(table, div, flags, width);
> >>
> >>         return min_t(unsigned int, value, div_mask(width));
> >>  }
> >> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider=
.h
> >> index df69531..a30c24c 100644
> >> --- a/include/linux/clk-provider.h
> >> +++ b/include/linux/clk-provider.h
> >> @@ -342,6 +342,9 @@ struct clk_div_table {
> >>   *     to the closest integer instead of the up one.
> >>   * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and=
 should
> >>   *     not be changed by the clock framework.
> >> + * CLK_DIVIDER_MAX_AT_ZERO - For dividers which are like CLK_DIVIDER_=
ONE_BASED
> >> + *     except when the value read from the register is zero, the divi=
sor is
> >> + *     2^width of the field.
> >>   */
> >>  struct clk_divider {
> >>         struct clk_hw   hw;
> >> @@ -359,6 +362,7 @@ struct clk_divider {
> >>  #define CLK_DIVIDER_HIWORD_MASK                BIT(3)
> >>  #define CLK_DIVIDER_ROUND_CLOSEST      BIT(4)
> >>  #define CLK_DIVIDER_READ_ONLY          BIT(5)
> >> +#define CLK_DIVIDER_MAX_AT_ZERO                BIT(6)
> >>
> >>  extern const struct clk_ops clk_divider_ops;
> >>
> >> --
> >> 1.9.0.138.g2de3478
> >>

      reply	other threads:[~2015-07-23 19:16 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-15 19:45 [PATCH] clk: allow a clk divider with max divisor when zero Jim Quinlan
2015-05-23 19:17 ` Michael Turquette
2015-05-26 14:43   ` Jim Quinlan
2015-07-23 19:16     ` Michael Turquette [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150723191643.642.47769@quantum \
    --to=mturquette@linaro.org \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=jim2101024@gmail.com \
    --cc=linux-clk@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.