From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite
Date: Wed, 27 May 2015 11:06:37 +0800 [thread overview]
Message-ID: <20150527030636.GB16165@dragon> (raw)
In-Reply-To: <1432314867-30888-1-git-send-email-gary.bisson@boundarydevices.com>
On Fri, May 22, 2015 at 07:14:25PM +0200, Gary Bisson wrote:
> This series adds the Okaya 7" LCD display that is a WVGA (800x480) panel with
> a 18-bit parallel interface for both Nitrogen and Sabrelite.
>
> A U-Boot script to configure the displays based on detection of the
> touch controller is available for reference here:
> https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
>
> Gary Bisson (2):
> ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display
> ARM: dts: imx6qdl-sabrelite: add Okaya LCD display
Philipp,
Are you okay with these two patches?
Shawn
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Gary Bisson
<gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>,
p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
eric.nelson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org
Subject: Re: [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite
Date: Wed, 27 May 2015 11:06:37 +0800 [thread overview]
Message-ID: <20150527030636.GB16165@dragon> (raw)
In-Reply-To: <1432314867-30888-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
On Fri, May 22, 2015 at 07:14:25PM +0200, Gary Bisson wrote:
> This series adds the Okaya 7" LCD display that is a WVGA (800x480) panel with
> a 18-bit parallel interface for both Nitrogen and Sabrelite.
>
> A U-Boot script to configure the displays based on detection of the
> touch controller is available for reference here:
> https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
>
> Gary Bisson (2):
> ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display
> ARM: dts: imx6qdl-sabrelite: add Okaya LCD display
Philipp,
Are you okay with these two patches?
Shawn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-05-27 3:06 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-22 17:14 [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
2015-05-22 17:14 ` Gary Bisson
2015-05-22 17:14 ` [PATCH 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display Gary Bisson
2015-05-22 17:14 ` Gary Bisson
2015-05-22 17:14 ` [PATCH 2/2] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-05-22 17:14 ` Gary Bisson
2015-05-27 3:06 ` Shawn Guo [this message]
2015-05-27 3:06 ` [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Shawn Guo
2015-05-27 7:38 ` Gary Bisson
2015-05-27 7:38 ` Gary Bisson
2015-05-27 7:57 ` Philipp Zabel
2015-05-27 7:57 ` Philipp Zabel
2015-05-29 7:56 ` [PATCH v2 0/2] ARM: dts: add Okaya LCD panel " Gary Bisson
2015-05-29 7:56 ` Gary Bisson
2015-05-29 7:56 ` [PATCH v2 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel Gary Bisson
2015-05-29 7:56 ` Gary Bisson
2015-05-29 7:56 ` [PATCH v2 2/2] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-05-29 7:56 ` Gary Bisson
2015-08-14 12:51 ` [PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
2015-08-14 12:51 ` Gary Bisson
2015-08-14 12:51 ` [PATCH v3 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel Gary Bisson
2015-08-14 12:51 ` Gary Bisson
2015-08-14 12:51 ` [PATCH v3 2/2] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-08-14 12:51 ` Gary Bisson
2015-09-30 13:05 ` [RESEND][PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
2015-09-30 13:05 ` Gary Bisson
2015-09-30 13:05 ` [RESEND][PATCH v3 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel Gary Bisson
2015-09-30 13:05 ` Gary Bisson
2015-09-30 13:05 ` [RESEND][PATCH v3 2/2] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-09-30 13:05 ` Gary Bisson
2015-10-08 7:55 ` [RESEND][PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Shawn Guo
2015-10-08 7:55 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150527030636.GB16165@dragon \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.