All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	daniel.lezcano@linaro.org, tglx@linutronix.de, wim@iguana.be,
	a.zummo@towertech.it, linux-watchdog@vger.kernel.org,
	rtc-linux@googlegroups.com, linux@roeck-us.net
Cc: kernel@stlinux.com
Subject: [rtc-linux] Re: [PATCH v2 00/12] mfd: Add support for Clocksource to LPC set
Date: Mon, 1 Jun 2015 08:38:23 +0100	[thread overview]
Message-ID: <20150601073823.GB3329@x1> (raw)
In-Reply-To: <1431435500-22899-1-git-send-email-lee.jones@linaro.org>

Device Tree Maintainers,

All of the functional patches in this series have been Acked by the
relevant maintainers, but the (pretty simple) DT changes are in need
of a suitable Ack.

Would someone mine glancing over them please?

> ST's Low Power Controller (LPC) controls three devices; watchdog, RTC
> and a Clocksource Timer.  Only one of the devices can be used at any
> one time, which is enforced by the Device Driver model.
> =20
> This patchset provides support for the Clocksource driver.  Watchdog
> and RTC are already in -next.
>=20
> Lee Jones (12):
>   mfd: dt-bindings: Provide human readable define for Clocksource mode
>   clocksource: sti: Provide support for the ST LPC Clocksource IP
>   clocksource: sti: Provide 'use timer as sched clock' capability
>   clocksource: bindings: Provide bindings for ST's LPC Clocksource
>     device
>   watchdog: st_wdt: Update IP layout information to include Clocksource
>   watchdog: bindings: Supply knowledge of a third supported device -
>     clocksource
>   rtc: st: Update IP layout information to include Clocksource
>   rtc: bindings: Supply knowledge of a third supported device -
>     clocksource
>   MAINTAINERS: Add the LPC Clocksource to STi maintained driver list
>   ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource
>   ARM: STi: Enable LPC Clocksource
>   ARM: STi: Update platform level menuconfig 'help'
>=20
>  .../devicetree/bindings/rtc/rtc-st-lpc.txt         |  15 ++-
>  .../devicetree/bindings/timer/st,stih407-lpc       |  28 +++++
>  .../devicetree/bindings/watchdog/st_lpc_wdt.txt    |  12 +-
>  MAINTAINERS                                        |   1 +
>  arch/arm/boot/dts/stih407-family.dtsi              |   2 +-
>  arch/arm/mach-sti/Kconfig                          |  10 +-
>  drivers/clocksource/Kconfig                        |   9 ++
>  drivers/clocksource/Makefile                       |   1 +
>  drivers/clocksource/clksrc_st_lpc.c                | 129 +++++++++++++++=
++++++
>  drivers/rtc/rtc-st-lpc.c                           |   2 +-
>  drivers/watchdog/st_lpc_wdt.c                      |   2 +-
>  include/dt-bindings/mfd/st-lpc.h                   |   1 +
>  12 files changed, 194 insertions(+), 18 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/timer/st,stih407-lp=
c
>  create mode 100644 drivers/clocksource/clksrc_st_lpc.c
>=20

--=20
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org =E2=94=82 Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

--=20
--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	daniel.lezcano@linaro.org, tglx@linutronix.de, wim@iguana.be,
	a.zummo@towertech.it, linux-watchdog@vger.kernel.org,
	rtc-linux@googlegroups.com, linux@roeck-us.net
Cc: kernel@stlinux.com
Subject: Re: [PATCH v2 00/12] mfd: Add support for Clocksource to LPC set
Date: Mon, 1 Jun 2015 08:38:23 +0100	[thread overview]
Message-ID: <20150601073823.GB3329@x1> (raw)
In-Reply-To: <1431435500-22899-1-git-send-email-lee.jones@linaro.org>

Device Tree Maintainers,

All of the functional patches in this series have been Acked by the
relevant maintainers, but the (pretty simple) DT changes are in need
of a suitable Ack.

Would someone mine glancing over them please?

> ST's Low Power Controller (LPC) controls three devices; watchdog, RTC
> and a Clocksource Timer.  Only one of the devices can be used at any
> one time, which is enforced by the Device Driver model.
>  
> This patchset provides support for the Clocksource driver.  Watchdog
> and RTC are already in -next.
> 
> Lee Jones (12):
>   mfd: dt-bindings: Provide human readable define for Clocksource mode
>   clocksource: sti: Provide support for the ST LPC Clocksource IP
>   clocksource: sti: Provide 'use timer as sched clock' capability
>   clocksource: bindings: Provide bindings for ST's LPC Clocksource
>     device
>   watchdog: st_wdt: Update IP layout information to include Clocksource
>   watchdog: bindings: Supply knowledge of a third supported device -
>     clocksource
>   rtc: st: Update IP layout information to include Clocksource
>   rtc: bindings: Supply knowledge of a third supported device -
>     clocksource
>   MAINTAINERS: Add the LPC Clocksource to STi maintained driver list
>   ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource
>   ARM: STi: Enable LPC Clocksource
>   ARM: STi: Update platform level menuconfig 'help'
> 
>  .../devicetree/bindings/rtc/rtc-st-lpc.txt         |  15 ++-
>  .../devicetree/bindings/timer/st,stih407-lpc       |  28 +++++
>  .../devicetree/bindings/watchdog/st_lpc_wdt.txt    |  12 +-
>  MAINTAINERS                                        |   1 +
>  arch/arm/boot/dts/stih407-family.dtsi              |   2 +-
>  arch/arm/mach-sti/Kconfig                          |  10 +-
>  drivers/clocksource/Kconfig                        |   9 ++
>  drivers/clocksource/Makefile                       |   1 +
>  drivers/clocksource/clksrc_st_lpc.c                | 129 +++++++++++++++++++++
>  drivers/rtc/rtc-st-lpc.c                           |   2 +-
>  drivers/watchdog/st_lpc_wdt.c                      |   2 +-
>  include/dt-bindings/mfd/st-lpc.h                   |   1 +
>  12 files changed, 194 insertions(+), 18 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/timer/st,stih407-lpc
>  create mode 100644 drivers/clocksource/clksrc_st_lpc.c
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/12] mfd: Add support for Clocksource to LPC set
Date: Mon, 1 Jun 2015 08:38:23 +0100	[thread overview]
Message-ID: <20150601073823.GB3329@x1> (raw)
In-Reply-To: <1431435500-22899-1-git-send-email-lee.jones@linaro.org>

Device Tree Maintainers,

All of the functional patches in this series have been Acked by the
relevant maintainers, but the (pretty simple) DT changes are in need
of a suitable Ack.

Would someone mine glancing over them please?

> ST's Low Power Controller (LPC) controls three devices; watchdog, RTC
> and a Clocksource Timer.  Only one of the devices can be used at any
> one time, which is enforced by the Device Driver model.
>  
> This patchset provides support for the Clocksource driver.  Watchdog
> and RTC are already in -next.
> 
> Lee Jones (12):
>   mfd: dt-bindings: Provide human readable define for Clocksource mode
>   clocksource: sti: Provide support for the ST LPC Clocksource IP
>   clocksource: sti: Provide 'use timer as sched clock' capability
>   clocksource: bindings: Provide bindings for ST's LPC Clocksource
>     device
>   watchdog: st_wdt: Update IP layout information to include Clocksource
>   watchdog: bindings: Supply knowledge of a third supported device -
>     clocksource
>   rtc: st: Update IP layout information to include Clocksource
>   rtc: bindings: Supply knowledge of a third supported device -
>     clocksource
>   MAINTAINERS: Add the LPC Clocksource to STi maintained driver list
>   ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource
>   ARM: STi: Enable LPC Clocksource
>   ARM: STi: Update platform level menuconfig 'help'
> 
>  .../devicetree/bindings/rtc/rtc-st-lpc.txt         |  15 ++-
>  .../devicetree/bindings/timer/st,stih407-lpc       |  28 +++++
>  .../devicetree/bindings/watchdog/st_lpc_wdt.txt    |  12 +-
>  MAINTAINERS                                        |   1 +
>  arch/arm/boot/dts/stih407-family.dtsi              |   2 +-
>  arch/arm/mach-sti/Kconfig                          |  10 +-
>  drivers/clocksource/Kconfig                        |   9 ++
>  drivers/clocksource/Makefile                       |   1 +
>  drivers/clocksource/clksrc_st_lpc.c                | 129 +++++++++++++++++++++
>  drivers/rtc/rtc-st-lpc.c                           |   2 +-
>  drivers/watchdog/st_lpc_wdt.c                      |   2 +-
>  include/dt-bindings/mfd/st-lpc.h                   |   1 +
>  12 files changed, 194 insertions(+), 18 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/timer/st,stih407-lpc
>  create mode 100644 drivers/clocksource/clksrc_st_lpc.c
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org,
	wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org,
	a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org,
	linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org
Cc: kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org
Subject: Re: [PATCH v2 00/12] mfd: Add support for Clocksource to LPC set
Date: Mon, 1 Jun 2015 08:38:23 +0100	[thread overview]
Message-ID: <20150601073823.GB3329@x1> (raw)
In-Reply-To: <1431435500-22899-1-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Device Tree Maintainers,

All of the functional patches in this series have been Acked by the
relevant maintainers, but the (pretty simple) DT changes are in need
of a suitable Ack.

Would someone mine glancing over them please?

> ST's Low Power Controller (LPC) controls three devices; watchdog, RTC
> and a Clocksource Timer.  Only one of the devices can be used at any
> one time, which is enforced by the Device Driver model.
>  
> This patchset provides support for the Clocksource driver.  Watchdog
> and RTC are already in -next.
> 
> Lee Jones (12):
>   mfd: dt-bindings: Provide human readable define for Clocksource mode
>   clocksource: sti: Provide support for the ST LPC Clocksource IP
>   clocksource: sti: Provide 'use timer as sched clock' capability
>   clocksource: bindings: Provide bindings for ST's LPC Clocksource
>     device
>   watchdog: st_wdt: Update IP layout information to include Clocksource
>   watchdog: bindings: Supply knowledge of a third supported device -
>     clocksource
>   rtc: st: Update IP layout information to include Clocksource
>   rtc: bindings: Supply knowledge of a third supported device -
>     clocksource
>   MAINTAINERS: Add the LPC Clocksource to STi maintained driver list
>   ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource
>   ARM: STi: Enable LPC Clocksource
>   ARM: STi: Update platform level menuconfig 'help'
> 
>  .../devicetree/bindings/rtc/rtc-st-lpc.txt         |  15 ++-
>  .../devicetree/bindings/timer/st,stih407-lpc       |  28 +++++
>  .../devicetree/bindings/watchdog/st_lpc_wdt.txt    |  12 +-
>  MAINTAINERS                                        |   1 +
>  arch/arm/boot/dts/stih407-family.dtsi              |   2 +-
>  arch/arm/mach-sti/Kconfig                          |  10 +-
>  drivers/clocksource/Kconfig                        |   9 ++
>  drivers/clocksource/Makefile                       |   1 +
>  drivers/clocksource/clksrc_st_lpc.c                | 129 +++++++++++++++++++++
>  drivers/rtc/rtc-st-lpc.c                           |   2 +-
>  drivers/watchdog/st_lpc_wdt.c                      |   2 +-
>  include/dt-bindings/mfd/st-lpc.h                   |   1 +
>  12 files changed, 194 insertions(+), 18 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/timer/st,stih407-lpc
>  create mode 100644 drivers/clocksource/clksrc_st_lpc.c
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	daniel.lezcano@linaro.org, tglx@linutronix.de, wim@iguana.be,
	a.zummo@towertech.it, linux-watchdog@vger.kernel.org,
	rtc-linux@googlegroups.com, linux@roeck-us.net
Cc: kernel@stlinux.com
Subject: Re: [PATCH v2 00/12] mfd: Add support for Clocksource to LPC set
Date: Mon, 1 Jun 2015 08:38:23 +0100	[thread overview]
Message-ID: <20150601073823.GB3329@x1> (raw)
In-Reply-To: <1431435500-22899-1-git-send-email-lee.jones@linaro.org>

Device Tree Maintainers,

All of the functional patches in this series have been Acked by the
relevant maintainers, but the (pretty simple) DT changes are in need
of a suitable Ack.

Would someone mine glancing over them please?

> ST's Low Power Controller (LPC) controls three devices; watchdog, RTC
> and a Clocksource Timer.  Only one of the devices can be used at any
> one time, which is enforced by the Device Driver model.
>  
> This patchset provides support for the Clocksource driver.  Watchdog
> and RTC are already in -next.
> 
> Lee Jones (12):
>   mfd: dt-bindings: Provide human readable define for Clocksource mode
>   clocksource: sti: Provide support for the ST LPC Clocksource IP
>   clocksource: sti: Provide 'use timer as sched clock' capability
>   clocksource: bindings: Provide bindings for ST's LPC Clocksource
>     device
>   watchdog: st_wdt: Update IP layout information to include Clocksource
>   watchdog: bindings: Supply knowledge of a third supported device -
>     clocksource
>   rtc: st: Update IP layout information to include Clocksource
>   rtc: bindings: Supply knowledge of a third supported device -
>     clocksource
>   MAINTAINERS: Add the LPC Clocksource to STi maintained driver list
>   ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource
>   ARM: STi: Enable LPC Clocksource
>   ARM: STi: Update platform level menuconfig 'help'
> 
>  .../devicetree/bindings/rtc/rtc-st-lpc.txt         |  15 ++-
>  .../devicetree/bindings/timer/st,stih407-lpc       |  28 +++++
>  .../devicetree/bindings/watchdog/st_lpc_wdt.txt    |  12 +-
>  MAINTAINERS                                        |   1 +
>  arch/arm/boot/dts/stih407-family.dtsi              |   2 +-
>  arch/arm/mach-sti/Kconfig                          |  10 +-
>  drivers/clocksource/Kconfig                        |   9 ++
>  drivers/clocksource/Makefile                       |   1 +
>  drivers/clocksource/clksrc_st_lpc.c                | 129 +++++++++++++++++++++
>  drivers/rtc/rtc-st-lpc.c                           |   2 +-
>  drivers/watchdog/st_lpc_wdt.c                      |   2 +-
>  include/dt-bindings/mfd/st-lpc.h                   |   1 +
>  12 files changed, 194 insertions(+), 18 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/timer/st,stih407-lpc
>  create mode 100644 drivers/clocksource/clksrc_st_lpc.c
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  parent reply	other threads:[~2015-06-01  7:38 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-12 12:58 [rtc-linux] [PATCH v2 00/12] mfd: Add support for Clocksource to LPC set Lee Jones
2015-05-12 12:58 ` Lee Jones
2015-05-12 12:58 ` Lee Jones
2015-05-12 12:58 ` Lee Jones
2015-05-12 12:58 ` [rtc-linux] [PATCH v2 01/12] mfd: dt-bindings: Provide human readable define for Clocksource mode Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58 ` [rtc-linux] [PATCH v2 02/12] clocksource: sti: Provide support for the ST LPC Clocksource IP Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 15:55   ` [rtc-linux] " Thomas Gleixner
2015-05-12 15:55     ` Thomas Gleixner
2015-05-12 15:55     ` Thomas Gleixner
2015-05-26 12:39   ` [rtc-linux] [PATCH v2.1 " Lee Jones
2015-05-26 12:39     ` Lee Jones
2015-05-26 12:39     ` Lee Jones
2015-05-26 12:39     ` Lee Jones
2015-05-26 12:39     ` Lee Jones
2015-05-27 12:38     ` [rtc-linux] " Daniel Lezcano
2015-05-27 12:38       ` Daniel Lezcano
2015-05-27 12:38       ` Daniel Lezcano
2015-05-27 12:38       ` Daniel Lezcano
2015-05-27 12:38       ` Daniel Lezcano
2015-05-12 12:58 ` [rtc-linux] [PATCH v2 03/12] clocksource: sti: Provide 'use timer as sched clock' capability Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-27 12:40   ` [rtc-linux] " Daniel Lezcano
2015-05-27 12:40     ` Daniel Lezcano
2015-05-27 12:40     ` Daniel Lezcano
2015-05-27 12:40     ` Daniel Lezcano
2015-05-12 12:58 ` [rtc-linux] [PATCH v2 04/12] clocksource: bindings: Provide bindings for ST's LPC Clocksource device Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58 ` [rtc-linux] [PATCH v2 05/12] watchdog: st_wdt: Update IP layout information to include Clocksource Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58 ` [rtc-linux] [PATCH v2 06/12] watchdog: bindings: Supply knowledge of a third supported device - clocksource Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58 ` [rtc-linux] [PATCH v2 07/12] rtc: st: Update IP layout information to include Clocksource Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58 ` [rtc-linux] [PATCH v2 08/12] rtc: bindings: Supply knowledge of a third supported device - clocksource Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58 ` [rtc-linux] [PATCH v2 09/12] MAINTAINERS: Add the LPC Clocksource to STi maintained driver list Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58 ` [rtc-linux] [PATCH v2 10/12] ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58 ` [rtc-linux] [PATCH v2 11/12] ARM: STi: Enable LPC Clocksource Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58 ` [rtc-linux] [PATCH v2 12/12] ARM: STi: Update platform level menuconfig 'help' Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-05-12 12:58   ` Lee Jones
2015-06-01  7:38 ` Lee Jones [this message]
2015-06-01  7:38   ` [PATCH v2 00/12] mfd: Add support for Clocksource to LPC set Lee Jones
2015-06-01  7:38   ` Lee Jones
2015-06-01  7:38   ` Lee Jones
2015-06-01  7:38   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150601073823.GB3329@x1 \
    --to=lee.jones@linaro.org \
    --cc=a.zummo@towertech.it \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@stlinux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=rtc-linux@googlegroups.com \
    --cc=tglx@linutronix.de \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.