From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCHv2 02/15] fs/iso9660: convert to the filesystem infrastructure
Date: Sun, 14 Jun 2015 16:52:25 +0200 [thread overview]
Message-ID: <20150614145225.GD3615@free.fr> (raw)
In-Reply-To: <1433802108-14351-3-git-send-email-thomas.petazzoni@free-electrons.com>
Thomas, All,
On 2015-06-09 00:21 +0200, Thomas Petazzoni spake thusly:
> This commit converts the iso9660 logic to the common rootfs
> infrastructure. What previously prevented it from being converted is
> that the iso9660 logic needed to remove a temporary folder after the
> image has been created.
>
> However, since Buildroot typically keeps build artefacts around, this
> commit changes the logic to keep this temporary folder around. Thanks
> to this change, converting to the common rootfs infrastructure becomes
> possible.
>
> In addition, the temporary folder is renamed from $(BUILD_DIR)/iso9660
> to the more descriptive $(BUILD_DIR)/rootfs-iso9660.tmp.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Regards,
Yann E. MORIN.
> ---
> fs/iso9660/iso9660.mk | 68 +++++++++++++++++++++++----------------------------
> 1 file changed, 31 insertions(+), 37 deletions(-)
>
> diff --git a/fs/iso9660/iso9660.mk b/fs/iso9660/iso9660.mk
> index 4ccfce9..35b0fe5 100644
> --- a/fs/iso9660/iso9660.mk
> +++ b/fs/iso9660/iso9660.mk
> @@ -2,59 +2,53 @@
> #
> # Build the iso96600 root filesystem image
> #
> -# Cannot be converted to the ROOTFS_TARGET infrastructure, because of
> -# the temporary construction in ISO9660_TARGET_DIR.
> -#
> ################################################################################
>
> -ISO9660_TARGET_DIR = $(BUILD_DIR)/iso9660
> +ISO9660_TARGET_DIR = $(BUILD_DIR)/rootfs-iso9660.tmp
> ISO9660_BOOT_MENU := $(call qstrip,$(BR2_TARGET_ROOTFS_ISO9660_BOOT_MENU))
>
> ROOTFS_ISO9660_DEPENDENCIES = grub host-cdrkit host-fakeroot linux rootfs-cpio
>
> -$(BINARIES_DIR)/rootfs.iso9660: $(ROOTFS_ISO9660_DEPENDENCIES)
> - @$(call MESSAGE,"Generating root filesystem image rootfs.iso9660")
> - $(INSTALL) -D -m 0644 $(GRUB_DIR)/stage2/stage2_eltorito \
> - $(ISO9660_TARGET_DIR)/boot/grub/stage2_eltorito
> - $(INSTALL) -D -m 0644 $(ISO9660_BOOT_MENU) \
> - $(ISO9660_TARGET_DIR)/boot/grub/menu.lst
> -ifeq ($(BR2_TARGET_GRUB_SPLASH),)
> - $(SED) '/^splashimage/d' $(ISO9660_TARGET_DIR)/boot/grub/menu.lst
> -else
> +ifeq ($(BR2_TARGET_GRUB_SPLASH),y)
> +define ROOTFS_ISO9660_SPLASHSCREEN
> $(INSTALL) -D -m 0644 boot/grub/splash.xpm.gz \
> $(ISO9660_TARGET_DIR)/splash.xpm.gz
> +endef
> +else
> +define ROOTFS_ISO9660_SPLASHSCREEN
> + $(SED) '/^splashimage/d' $(ISO9660_TARGET_DIR)/boot/grub/menu.lst
> +endef
> endif
> - $(INSTALL) -D -m 0644 $(LINUX_IMAGE_PATH) $(ISO9660_TARGET_DIR)/kernel
> +
> ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
> +define ROOTFS_ISO9660_INITRD
> $(SED) '/initrd/d' $(ISO9660_TARGET_DIR)/boot/grub/menu.lst
> +endef
> else
> +define ROOTFS_ISO9660_INITRD
> $(INSTALL) -D -m 0644 $(BINARIES_DIR)/rootfs.cpio$(ROOTFS_CPIO_COMPRESS_EXT) \
> $(ISO9660_TARGET_DIR)/initrd
> +endef
> endif
> - # Use fakeroot to pretend all target binaries are owned by root
> - rm -f $(FAKEROOT_SCRIPT)
> - echo "chown -h -R 0:0 $(ISO9660_TARGET_DIR)" >> $(FAKEROOT_SCRIPT)
> - # Use fakeroot so mkisofs believes the previous fakery
> - echo "$(HOST_DIR)/usr/bin/genisoimage -R -b boot/grub/stage2_eltorito -no-emul-boot " \
> - "-boot-load-size 4 -boot-info-table -o $@ $(ISO9660_TARGET_DIR)" \
> - >> $(FAKEROOT_SCRIPT)
> - chmod a+x $(FAKEROOT_SCRIPT)
> - $(HOST_DIR)/usr/bin/fakeroot -- $(FAKEROOT_SCRIPT)
> - - at rm -f $(FAKEROOT_SCRIPT)
> - - at rm -rf $(ISO9660_TARGET_DIR)
>
> -rootfs-iso9660: $(BINARIES_DIR)/rootfs.iso9660
> +define ROOTFS_ISO9660_PREPARATION
> + $(RM) -rf $(ISO9660_TARGET_DIR)
> + mkdir -p $(ISO9660_TARGET_DIR)
> + $(INSTALL) -D -m 0644 $(GRUB_DIR)/stage2/stage2_eltorito \
> + $(ISO9660_TARGET_DIR)/boot/grub/stage2_eltorito
> + $(INSTALL) -D -m 0644 $(ISO9660_BOOT_MENU) \
> + $(ISO9660_TARGET_DIR)/boot/grub/menu.lst
> + $(INSTALL) -D -m 0644 $(LINUX_IMAGE_PATH) $(ISO9660_TARGET_DIR)/kernel
> + $(ROOTFS_ISO9660_SPLASHSCREEN)
> + $(ROOTFS_ISO9660_INITRD)
> +endef
>
> -rootfs-iso9660-show-depends:
> - @echo $(ROOTFS_ISO9660_DEPENDENCIES)
> +ROOTFS_ISO9660_PRE_GEN_HOOKS += ROOTFS_ISO9660_PREPARATION
>
> -.PHONY: rootfs-iso9660 rootfs-iso9660-show-depends
> +define ROOTFS_ISO9660_CMD
> + $(HOST_DIR)/usr/bin/genisoimage -R -b boot/grub/stage2_eltorito \
> + -no-emul-boot -boot-load-size 4 -boot-info-table \
> + -o $@ $(ISO9660_TARGET_DIR)
> +endef
>
> -################################################################################
> -#
> -# Toplevel Makefile options
> -#
> -################################################################################
> -ifeq ($(BR2_TARGET_ROOTFS_ISO9660),y)
> -TARGETS_ROOTFS += rootfs-iso9660
> -endif
> +$(eval $(call ROOTFS_TARGET,iso9660))
> --
> 2.1.0
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
next prev parent reply other threads:[~2015-06-14 14:52 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-08 22:21 [Buildroot] [PATCHv2 00/15] iso9660 support improvements Thomas Petazzoni
2015-06-08 22:21 ` [Buildroot] [PATCHv2 01/15] fs/iso9660: use if ... endif block instead of depends on Thomas Petazzoni
2015-06-08 22:21 ` [Buildroot] [PATCHv2 02/15] fs/iso9660: convert to the filesystem infrastructure Thomas Petazzoni
2015-06-14 14:52 ` Yann E. MORIN [this message]
2015-06-08 22:21 ` [Buildroot] [PATCHv2 03/15] fs/iso9660: enable Joliet extension Thomas Petazzoni
2015-06-08 22:21 ` [Buildroot] [PATCHv2 04/15] fs/iso9660: rename all variables to use the ROOTFS_ISO9660 prefix Thomas Petazzoni
2015-06-08 22:21 ` [Buildroot] [PATCHv2 05/15] fs/iso9660: change the location of the splash image Thomas Petazzoni
2015-06-08 22:21 ` [Buildroot] [PATCHv2 06/15] fs/iso9660: get grub splash from $(TARGET_DIR) Thomas Petazzoni
2015-06-14 14:59 ` Yann E. MORIN
2015-06-08 22:21 ` [Buildroot] [PATCHv2 07/15] fs/iso9660: prepare cleaner kernel/initrd path handling Thomas Petazzoni
2015-06-08 22:21 ` [Buildroot] [PATCHv2 08/15] fs/iso9660: support building a real iso9660 filesystem Thomas Petazzoni
2015-06-14 15:17 ` Yann E. MORIN
2015-06-14 21:20 ` Thomas Petazzoni
2015-06-08 22:21 ` [Buildroot] [PATCHv2 09/15] fs/iso9660: introduce new variables Thomas Petazzoni
2015-06-14 15:25 ` Yann E. MORIN
2015-06-08 22:21 ` [Buildroot] [PATCHv2 10/15] fs/iso9660: introduce bootloader choice Thomas Petazzoni
2015-06-14 15:39 ` Yann E. MORIN
2015-06-08 22:21 ` [Buildroot] [PATCHv2 11/15] fs/iso9660: use 'depends on' instead of 'select' for bootloader Thomas Petazzoni
2015-06-14 15:40 ` Yann E. MORIN
2015-06-08 22:21 ` [Buildroot] [PATCHv2 12/15] fs/iso9660: add isolinux support Thomas Petazzoni
2015-06-14 15:47 ` Yann E. MORIN
2015-06-14 21:24 ` Thomas Petazzoni
2015-06-08 22:21 ` [Buildroot] [PATCHv2 13/15] fs/iso9660: add hybrid image support Thomas Petazzoni
2015-06-14 15:49 ` Yann E. MORIN
2015-06-14 15:49 ` Yann E. MORIN
2015-07-27 9:24 ` Noé RUBINSTEIN
2015-07-27 9:42 ` Thomas Petazzoni
2015-06-08 22:21 ` [Buildroot] [PATCHv2 14/15] grub2: prepare and install El Torito image Thomas Petazzoni
2015-06-14 15:50 ` Yann E. MORIN
2015-06-08 22:21 ` [Buildroot] [PATCHv2 15/15] fs/iso9660: add support for grub2 Thomas Petazzoni
2015-06-14 15:56 ` Yann E. MORIN
2015-06-14 21:26 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150614145225.GD3615@free.fr \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.