Re: bitbake error when using arago-fido-config

From: Denys Dmytriyenko <denys@ti.com>
To: Ankur Tyagi <ankur.tyagi85@gmail.com>
Cc: meta-arago@arago-project.org
Subject: Re: bitbake error when using arago-fido-config
Date: Mon, 15 Jun 2015 12:22:26 -0400	[thread overview]
Message-ID: <20150615162226.GO4825@edge> (raw)
In-Reply-To: <CADySD0FWxqfprvwCAXSEqyL2Sx08=ZWPxdzKoh5vws=cimeZUA@mail.gmail.com>

http://arago-project.org/pipermail/meta-arago/2015-May/005666.html


On Sat, Jun 13, 2015 at 10:38:46AM +1200, Ankur Tyagi wrote:
> "With typos fixed"
> 
> 
> Hi,
> 
> I am trying to create tisdk rootfs image for AM335x EVM.
> 
> Following are the steps are performed:
> 
> git clone git://arago-project.org/git/projects/oe-layersetup.git fido
> export
> PATH=/opt/fido/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin:$PATH
> cd fido
> ./oe-layersetup.sh -f configs/arago-fido-config.txt
> cd build
> . conf/setenv
> MACHINE=am335x-evm bitbake tisdk-rootfs-image
> 
> This gave following error :
> 
> NOTE: Started PRServer with DBfile:
> /home/ankur/fido/build/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 53096,
> PID: 3653
> ERROR: Layer 'networking-layer' depends on layer 'meta-python', but this
> layer is not enabled in your configuration
> 
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> 
> I then added meta-python in bblayers.conf
> 
> /home/ankur/fido/sources/meta-openembedded/meta-python \
> 
> Again started bitbake
> MACHINE=am335x-evm bitbake tisdk-rootfs-image
> 
> and got this error
> 
> ERROR: ParseError at
> /home/ankur/fido/sources/meta-arago/meta-arago-extras/recipes-core/meta/
> external-arago-toolchain.bb:1: Could not include required file
> recipes-core/eglibc/eglibc-package.inc
> 
> Summary: There were 3 WARNING messages shown.
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> 
> What wrong am I doing and how to fix it ?
> 
> thanks
> Ankur
> 
> 
> 
> 
> On Sat, Jun 13, 2015 at 10:36 AM, Ankur Tyagi <ankur.tyagi85@gmail.com>
> wrote:
> 
> > 
> > Hi,
> >
> > I am trying to create tisdk rootfs image for AM335x EVM.
> >
> > Following are the steps are performed:
> >
> > git clone git://arago-project.org/git/projects/oe-layersetup.git fido
> > export
> > PATH=/opt/fido/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin:$PATH
> > cd fido
> > ./oe-layersetup.sh -f configs/arago-fido-conig.txt
> > cd build
> > . conf/setenv
> > MACHINE=am335-evm bitbake tisdk-rootfs-image
> >
> > This gave following error :
> >
> > NOTE: Started PRServer with DBfile:
> > /home/ankur/fido/build/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 53096,
> > PID: 3653
> > ERROR: Layer 'networking-layer' depends on layer 'meta-python', but this
> > layer is not enabled in your configuration
> >
> > Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> >
> > I then added meta-python in bblayers.conf
> >
> > /home/ankur/fido/sources/meta-openembedded/meta-python \
> >
> > Again started bitbake
> > MACHINE=am335-evm bitbake tisdk-rootfs-image
> >
> > and got this error
> >
> > ERROR: ParseError at
> > /home/ankur/fido/sources/meta-arago/meta-arago-extras/recipes-core/meta/
> > external-arago-toolchain.bb:1: Could not include required file
> > recipes-core/eglibc/eglibc-package.inc
> >
> > Summary: There were 3 WARNING messages shown.
> > Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> >
> > What wrong am I doing and how to fix it ?
> >
> > thanks
> > Ankur
> >

> _______________________________________________
> meta-arago mailing list
> meta-arago@arago-project.org
> http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago