Re: bitbake error when using arago-fido-config

From: Denys Dmytriyenko <denys@ti.com>
To: Ankur Tyagi <ankur.tyagi85@gmail.com>
Cc: meta-arago@arago-project.org
Subject: Re: bitbake error when using arago-fido-config
Date: Tue, 16 Jun 2015 22:33:17 -0400	[thread overview]
Message-ID: <20150617023316.GE16167@edge> (raw)
In-Reply-To: <CADySD0H4FoHD3S2tZauGrYZmBYNe1EZupPJWckWmRr3wnY+OKg@mail.gmail.com>

Correct, it got branched off couple weeks ago and so far I've been working on 
it locally, but haven't pushed anything significant yet.

On Wed, Jun 17, 2015 at 11:04:20AM +1200, Ankur Tyagi wrote:
> So does that mean meta-arago fido is still nor ready ?
> 
> "Knowledge is knowing tomato is a fruit, wisdom is not putting it in a
> fruit salad"
> 
> On Tue, Jun 16, 2015 at 4:22 AM, Denys Dmytriyenko <denys@ti.com> wrote:
> 
> > http://arago-project.org/pipermail/meta-arago/2015-May/005666.html
> >
> >
> > On Sat, Jun 13, 2015 at 10:38:46AM +1200, Ankur Tyagi wrote:
> > > "With typos fixed"
> > >
> > > 
> > > Hi,
> > >
> > > I am trying to create tisdk rootfs image for AM335x EVM.
> > >
> > > Following are the steps are performed:
> > >
> > > git clone git://arago-project.org/git/projects/oe-layersetup.git fido
> > > export
> > > PATH=/opt/fido/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin:$PATH
> > > cd fido
> > > ./oe-layersetup.sh -f configs/arago-fido-config.txt
> > > cd build
> > > . conf/setenv
> > > MACHINE=am335x-evm bitbake tisdk-rootfs-image
> > >
> > > This gave following error :
> > >
> > > NOTE: Started PRServer with DBfile:
> > > /home/ankur/fido/build/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 53096,
> > > PID: 3653
> > > ERROR: Layer 'networking-layer' depends on layer 'meta-python', but this
> > > layer is not enabled in your configuration
> > >
> > > Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> > >
> > > I then added meta-python in bblayers.conf
> > >
> > > /home/ankur/fido/sources/meta-openembedded/meta-python \
> > >
> > > Again started bitbake
> > > MACHINE=am335x-evm bitbake tisdk-rootfs-image
> > >
> > > and got this error
> > >
> > > ERROR: ParseError at
> > > /home/ankur/fido/sources/meta-arago/meta-arago-extras/recipes-core/meta/
> > > external-arago-toolchain.bb:1: Could not include required file
> > > recipes-core/eglibc/eglibc-package.inc
> > >
> > > Summary: There were 3 WARNING messages shown.
> > > Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> > >
> > > What wrong am I doing and how to fix it ?
> > >
> > > thanks
> > > Ankur
> > >
> > >
> > >
> > >
> > > On Sat, Jun 13, 2015 at 10:36 AM, Ankur Tyagi <ankur.tyagi85@gmail.com>
> > > wrote:
> > >
> > > > 
> > > > Hi,
> > > >
> > > > I am trying to create tisdk rootfs image for AM335x EVM.
> > > >
> > > > Following are the steps are performed:
> > > >
> > > > git clone git://arago-project.org/git/projects/oe-layersetup.git fido
> > > > export
> > > >
> > PATH=/opt/fido/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin:$PATH
> > > > cd fido
> > > > ./oe-layersetup.sh -f configs/arago-fido-conig.txt
> > > > cd build
> > > > . conf/setenv
> > > > MACHINE=am335-evm bitbake tisdk-rootfs-image
> > > >
> > > > This gave following error :
> > > >
> > > > NOTE: Started PRServer with DBfile:
> > > > /home/ankur/fido/build/cache/prserv.sqlite3, IP: 127.0.0.1, PORT:
> > 53096,
> > > > PID: 3653
> > > > ERROR: Layer 'networking-layer' depends on layer 'meta-python', but
> > this
> > > > layer is not enabled in your configuration
> > > >
> > > > Summary: There was 1 ERROR message shown, returning a non-zero exit
> > code.
> > > >
> > > > I then added meta-python in bblayers.conf
> > > >
> > > > /home/ankur/fido/sources/meta-openembedded/meta-python \
> > > >
> > > > Again started bitbake
> > > > MACHINE=am335-evm bitbake tisdk-rootfs-image
> > > >
> > > > and got this error
> > > >
> > > > ERROR: ParseError at
> > > >
> > /home/ankur/fido/sources/meta-arago/meta-arago-extras/recipes-core/meta/
> > > > external-arago-toolchain.bb:1: Could not include required file
> > > > recipes-core/eglibc/eglibc-package.inc
> > > >
> > > > Summary: There were 3 WARNING messages shown.
> > > > Summary: There was 1 ERROR message shown, returning a non-zero exit
> > code.
> > > >
> > > > What wrong am I doing and how to fix it ?
> > > >
> > > > thanks
> > > > Ankur
> > > >
> >
> > > _______________________________________________
> > > meta-arago mailing list
> > > meta-arago@arago-project.org
> > > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
> >
> >