Re: [PATCH -mm v6 0/6] idle memory tracking

[Vladimir Davydov <vdavydov@parallels.com>]

Hi,

Any comments, thoughts, proposals regarding this patch? Any chance for
it to get merged?

Thanks,
Vladimir

On Fri, Jun 12, 2015 at 12:52:20PM +0300, Vladimir Davydov wrote:
> Hi,
> 
> This patch set introduces a new user API for tracking user memory pages
> that have not been used for a given period of time. The purpose of this
> is to provide the userspace with the means of tracking a workload's
> working set, i.e. the set of pages that are actively used by the
> workload. Knowing the working set size can be useful for partitioning
> the system more efficiently, e.g. by tuning memory cgroup limits
> appropriately, or for job placement within a compute cluster.
> 
> ---- USE CASES ----
> 
> The unified cgroup hierarchy has memory.low and memory.high knobs, which
> are defined as the low and high boundaries for the workload working set
> size. However, the working set size of a workload may be unknown or
> change in time. With this patch set, one can periodically estimate the
> amount of memory unused by each cgroup and tune their memory.low and
> memory.high parameters accordingly, therefore optimizing the overall
> memory utilization.
> 
> Another use case is balancing workloads within a compute cluster.
> Knowing how much memory is not really used by a workload unit may help
> take a more optimal decision when considering migrating the unit to
> another node within the cluster.
> 
> Also, as noted by Minchan, this would be useful for per-process reclaim
> (https://lwn.net/Articles/545668/). With idle tracking, we could reclaim idle
> pages only by smart user memory manager.
> 
> ---- USER API ----
> 
> The user API consists of two new proc files:
> 
>  * /proc/kpageidle.  This file implements a bitmap where each bit corresponds
>    to a page, indexed by PFN. When the bit is set, the corresponding page is
>    idle. A page is considered idle if it has not been accessed since it was
>    marked idle. To mark a page idle one should set the bit corresponding to the
>    page by writing to the file. A value written to the file is OR-ed with the
>    current bitmap value. Only user memory pages can be marked idle, for other
>    page types input is silently ignored. Writing to this file beyond max PFN
>    results in the ENXIO error. Only available when CONFIG_IDLE_PAGE_TRACKING is
>    set.
> 
>    This file can be used to estimate the amount of pages that are not
>    used by a particular workload as follows:
> 
>    1. mark all pages of interest idle by setting corresponding bits in the
>       /proc/kpageidle bitmap
>    2. wait until the workload accesses its working set
>    3. read /proc/kpageidle and count the number of bits set
> 
>  * /proc/kpagecgroup.  This file contains a 64-bit inode number of the
>    memory cgroup each page is charged to, indexed by PFN. Only available when
>    CONFIG_MEMCG is set.
> 
>    This file can be used to find all pages (including unmapped file
>    pages) accounted to a particular cgroup. Using /proc/kpageidle, one
>    can then estimate the cgroup working set size.
> 
> For an example of using these files for estimating the amount of unused
> memory pages per each memory cgroup, please see the script attached
> below.
> 
> ---- REASONING ----
> 
> The reason to introduce the new user API instead of using
> /proc/PID/{clear_refs,smaps} is that the latter has two serious
> drawbacks:
> 
>  - it does not count unmapped file pages
>  - it affects the reclaimer logic
> 
> The new API attempts to overcome them both. For more details on how it
> is achieved, please see the comment to patch 5.
> 
> ---- CHANGE LOG ----
> 
> Changes in v6:
> 
>  - Split the patch introducing page_cgroup_ino helper to ease review.
>  - Rebase on top of v4.1-rc7-mmotm-2015-06-09-16-55
> 
> Changes in v5:
> 
>  - Fix possible race between kpageidle_clear_pte_refs() and
>    __page_set_anon_rmap() by checking that a page is on an LRU list
>    under zone->lru_lock (Minchan).
>  - Export idle flag via /proc/kpageflags (Minchan).
>  - Rebase on top of 4.1-rc3.
> 
> Changes in v4:
> 
> This iteration primarily addresses Minchan's comments to v3:
> 
>  - Implement /proc/kpageidle as a bitmap instead of using u64 per each page,
>    because there does not seem to be any future uses for the other 63 bits.
>  - Do not double-increase pra->referenced in page_referenced_one() if the page
>    was young and referenced recently.
>  - Remove the pointless (page_count == 0) check from kpageidle_get_page().
>  - Rename kpageidle_clear_refs() to kpageidle_clear_pte_refs().
>  - Improve comments to kpageidle-related functions.
>  - Rebase on top of 4.1-rc2.
> 
> Note it does not address Minchan's concern of possible __page_set_anon_rmap vs
> page_referenced race (see https://lkml.org/lkml/2015/5/3/220) since it is still
> unclear if this race can really happen (see https://lkml.org/lkml/2015/5/4/160)
> 
> Changes in v3:
> 
>  - Enable CONFIG_IDLE_PAGE_TRACKING for 32 bit. Since this feature
>    requires two extra page flags and there is no space for them on 32
>    bit, page ext is used (thanks to Minchan Kim).
>  - Minor code cleanups and comments improved.
>  - Rebase on top of 4.1-rc1.
> 
> Changes in v2:
> 
>  - The main difference from v1 is the API change. In v1 the user can
>    only set the idle flag for all pages at once, and for clearing the
>    Idle flag on pages accessed via page tables /proc/PID/clear_refs
>    should be used.
>    The main drawback of the v1 approach, as noted by Minchan, is that on
>    big machines setting the idle flag for each pages can result in CPU
>    bursts, which would be especially frustrating if the user only wanted
>    to estimate the amount of idle pages for a particular process or VMA.
>    With the new API a more fine-grained approach is possible: one can
>    read a process's /proc/PID/pagemap and set/check the Idle flag only
>    for those pages of the process's address space he or she is
>    interested in.
>    Another good point about the v2 API is that it is possible to limit
>    /proc/kpage* scanning rate when the user wants to estimate the total
>    number of idle pages, which is unachievable with the v1 approach.
>  - Make /proc/kpagecgroup return the ino of the closest online ancestor
>    in case the cgroup a page is charged to is offline.
>  - Fix /proc/PID/clear_refs not clearing Young page flag.
>  - Rebase on top of v4.0-rc6-mmotm-2015-04-01-14-54
> 
> v4: https://lkml.org/lkml/2015/5/7/580
> v3: https://lkml.org/lkml/2015/4/28/224
> v2: https://lkml.org/lkml/2015/4/7/260
> v1: https://lkml.org/lkml/2015/3/18/794
> 
> ---- PATCH SET STRUCTURE ----
> 
> The patch set is organized as follows:
> 
>  - patch 1 adds page_cgroup_ino() helper for the sake of
>    /proc/kpagecgroup and patches 2-3 do related cleanup
>  - patch 4 adds /proc/kpagecgroup, which reports cgroup ino each page is
>    charged to
>  - patch 5 implements the idle page tracking feature, including the
>    userspace API, /proc/kpageidle
>  - patch 6 exports idle flag via /proc/kpageflags
> 
> ---- SIMILAR WORKS ----
> 
> Originally, the patch for tracking idle memory was proposed back in 2011
> by Michel Lespinasse (see http://lwn.net/Articles/459269/). The main
> difference between Michel's patch and this one is that Michel
> implemented a kernel space daemon for estimating idle memory size per
> cgroup while this patch only provides the userspace with the minimal API
> for doing the job, leaving the rest up to the userspace. However, they
> both share the same idea of Idle/Young page flags to avoid affecting the
> reclaimer logic.
> 
> ---- SCRIPT FOR COUNTING IDLE PAGES PER CGROUP ----
> #! /usr/bin/python
> #
> 
> import os
> import stat
> import errno
> import struct
> 
> CGROUP_MOUNT = "/sys/fs/cgroup/memory"
> BUFSIZE = 8 * 1024  # must be multiple of 8
> 
> 
> def set_idle():
>     f = open("/proc/kpageidle", "wb", BUFSIZE)
>     while True:
>         try:
>             f.write(struct.pack("Q", pow(2, 64) - 1))
>         except IOError as err:
>             if err.errno == errno.ENXIO:
>                 break
>             raise
>     f.close()
> 
> 
> def count_idle():
>     f_flags = open("/proc/kpageflags", "rb", BUFSIZE)
>     f_cgroup = open("/proc/kpagecgroup", "rb", BUFSIZE)
>     f_idle = open("/proc/kpageidle", "rb", BUFSIZE)
> 
>     pfn = 0
>     nr_idle = {}
>     while True:
>         s = f_flags.read(8)
>         if not s:
>             break
> 
>         flags, = struct.unpack('Q', s)
>         cgino, = struct.unpack('Q', f_cgroup.read(8))
> 
>         bit = pfn % 64
>         if not bit:
>             idle_bitmap, = struct.unpack('Q', f_idle.read(8))
> 
>         idle = idle_bitmap >> bit & 1
>         pfn += 1
> 
>         unevictable = flags >> 18 & 1
>         huge = flags >> 22 & 1
> 
>         if idle and not unevictable:
>             nr_idle[cgino] = nr_idle.get(cgino, 0) + (512 if huge else 1)
> 
>     f_flags.close()
>     f_cgroup.close()
>     f_idle.close()
>     return nr_idle
> 
> 
> print "Setting the idle flag for each page..."
> set_idle()
> 
> raw_input("Wait until the workload accesses its working set, then press Enter")
> 
> print "Counting idle pages..."
> nr_idle = count_idle()
> 
> for dir, subdirs, files in os.walk(CGROUP_MOUNT):
>     ino = os.stat(dir)[stat.ST_INO]
>     print dir + ": " + str(nr_idle.get(ino, 0) * 4) + " KB"
> ---- END SCRIPT ----
> 
> Comments are more than welcome.
> 
> Thanks,
> 
> Vladimir Davydov (6):
>   memcg: add page_cgroup_ino helper
>   hwpoison: use page_cgroup_ino for filtering by memcg
>   memcg: zap try_get_mem_cgroup_from_page
>   proc: add kpagecgroup file
>   proc: add kpageidle file
>   proc: export idle flag via kpageflags
> 
>  Documentation/vm/pagemap.txt           |  22 +++-
>  fs/proc/page.c                         | 234 +++++++++++++++++++++++++++++++++
>  fs/proc/task_mmu.c                     |   4 +-
>  include/linux/memcontrol.h             |   7 +-
>  include/linux/mm.h                     |  88 +++++++++++++
>  include/linux/page-flags.h             |   9 ++
>  include/linux/page_ext.h               |   4 +
>  include/uapi/linux/kernel-page-flags.h |   1 +
>  mm/Kconfig                             |  12 ++
>  mm/debug.c                             |   4 +
>  mm/hwpoison-inject.c                   |   5 +-
>  mm/memcontrol.c                        |  71 +++++-----
>  mm/memory-failure.c                    |  16 +--
>  mm/page_ext.c                          |   3 +
>  mm/rmap.c                              |   8 ++
>  mm/swap.c                              |   2 +
>  16 files changed, 428 insertions(+), 62 deletions(-)
> 
> -- 
> 2.1.4
> 
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org.  For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>