From: Michael Turquette <mturquette@baylibre.com>
To: Pi-Cheng Chen <pi-cheng.chen@linaro.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
linaro-kernel@lists.linaro.org,
linux-mediatek@lists.infradead.org
Subject: Re: [PATCH v6 1/4] dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings
Date: Thu, 09 Jul 2015 07:55:51 -0700 [thread overview]
Message-ID: <20150709145551.9112.35610@quantum> (raw)
In-Reply-To: <1436437661-17606-2-git-send-email-pi-cheng.chen@linaro.org>
Quoting Pi-Cheng Chen (2015-07-09 03:27:38)
> This patch adds the clock and regulator consumer properties part of
> document for CPU DVFS clocks on Mediatek MT8173 SoC.
>
> Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Regards,
Mike
> ---
> .../devicetree/bindings/clock/mt8173-cpu-dvfs.txt | 83 ++++++++++++++++++++++
> 1 file changed, 83 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
> new file mode 100644
> index 0000000..27b3521
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
> @@ -0,0 +1,83 @@
> +Device Tree Clock bindings for CPU DVFS clock of Mediatek MT8173 SoC
> +
> +Required properties:
> +- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
> +- clock-names: Should contain the following:
> + "cpu" - The multiplexer for clock input of CPU cluster.
> + "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock
> + source (usually MAINPLL) when the original CPU PLL is under
> + transition and not stable yet.
> + Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
> + generic clock consumer properties.
> +- proc-supply: Regulator for Vproc of CPU cluster.
> +
> +Optional properties:
> +- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
> + needs to do "voltage tracking" to step by step scale up/down Vproc and
> + Vsram to fit SoC specific needs. When absent, the voltage scaling
> + flow is handled by hardware, hence no software "voltage tracking" is
> + needed.
> +
> +Example:
> +--------
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x000>;
> + enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + clocks = <&infracfg CLK_INFRA_CA53SEL>,
> + <&apmixedsys CLK_APMIXED_MAINPLL>;
> + clock-names = "cpu", "intermediate";
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x001>;
> + enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + clocks = <&infracfg CLK_INFRA_CA53SEL>,
> + <&apmixedsys CLK_APMIXED_MAINPLL>;
> + clock-names = "cpu", "intermediate";
> + };
> +
> + cpu2: cpu@100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x100>;
> + enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + clocks = <&infracfg CLK_INFRA_CA57SEL>,
> + <&apmixedsys CLK_APMIXED_MAINPLL>;
> + clock-names = "cpu", "intermediate";
> + };
> +
> + cpu3: cpu@101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x101>;
> + enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + clocks = <&infracfg CLK_INFRA_CA57SEL>,
> + <&apmixedsys CLK_APMIXED_MAINPLL>;
> + clock-names = "cpu", "intermediate";
> + };
> +
> + &cpu0 {
> + proc-supply = <&mt6397_vpca15_reg>;
> + };
> +
> + &cpu1 {
> + proc-supply = <&mt6397_vpca15_reg>;
> + };
> +
> + &cpu2 {
> + proc-supply = <&da9211_vcpu_reg>;
> + sram-supply = <&mt6397_vsramca7_reg>;
> + };
> +
> + &cpu3 {
> + proc-supply = <&da9211_vcpu_reg>;
> + sram-supply = <&mt6397_vsramca7_reg>;
> + };
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: mturquette@baylibre.com (Michael Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 1/4] dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings
Date: Thu, 09 Jul 2015 07:55:51 -0700 [thread overview]
Message-ID: <20150709145551.9112.35610@quantum> (raw)
In-Reply-To: <1436437661-17606-2-git-send-email-pi-cheng.chen@linaro.org>
Quoting Pi-Cheng Chen (2015-07-09 03:27:38)
> This patch adds the clock and regulator consumer properties part of
> document for CPU DVFS clocks on Mediatek MT8173 SoC.
>
> Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Regards,
Mike
> ---
> .../devicetree/bindings/clock/mt8173-cpu-dvfs.txt | 83 ++++++++++++++++++++++
> 1 file changed, 83 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
> new file mode 100644
> index 0000000..27b3521
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
> @@ -0,0 +1,83 @@
> +Device Tree Clock bindings for CPU DVFS clock of Mediatek MT8173 SoC
> +
> +Required properties:
> +- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
> +- clock-names: Should contain the following:
> + "cpu" - The multiplexer for clock input of CPU cluster.
> + "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock
> + source (usually MAINPLL) when the original CPU PLL is under
> + transition and not stable yet.
> + Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
> + generic clock consumer properties.
> +- proc-supply: Regulator for Vproc of CPU cluster.
> +
> +Optional properties:
> +- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
> + needs to do "voltage tracking" to step by step scale up/down Vproc and
> + Vsram to fit SoC specific needs. When absent, the voltage scaling
> + flow is handled by hardware, hence no software "voltage tracking" is
> + needed.
> +
> +Example:
> +--------
> + cpu0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x000>;
> + enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + clocks = <&infracfg CLK_INFRA_CA53SEL>,
> + <&apmixedsys CLK_APMIXED_MAINPLL>;
> + clock-names = "cpu", "intermediate";
> + };
> +
> + cpu1: cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x001>;
> + enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + clocks = <&infracfg CLK_INFRA_CA53SEL>,
> + <&apmixedsys CLK_APMIXED_MAINPLL>;
> + clock-names = "cpu", "intermediate";
> + };
> +
> + cpu2: cpu at 100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x100>;
> + enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + clocks = <&infracfg CLK_INFRA_CA57SEL>,
> + <&apmixedsys CLK_APMIXED_MAINPLL>;
> + clock-names = "cpu", "intermediate";
> + };
> +
> + cpu3: cpu at 101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a57";
> + reg = <0x101>;
> + enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + clocks = <&infracfg CLK_INFRA_CA57SEL>,
> + <&apmixedsys CLK_APMIXED_MAINPLL>;
> + clock-names = "cpu", "intermediate";
> + };
> +
> + &cpu0 {
> + proc-supply = <&mt6397_vpca15_reg>;
> + };
> +
> + &cpu1 {
> + proc-supply = <&mt6397_vpca15_reg>;
> + };
> +
> + &cpu2 {
> + proc-supply = <&da9211_vcpu_reg>;
> + sram-supply = <&mt6397_vsramca7_reg>;
> + };
> +
> + &cpu3 {
> + proc-supply = <&da9211_vcpu_reg>;
> + sram-supply = <&mt6397_vsramca7_reg>;
> + };
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-07-09 14:55 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-09 10:27 [PATCH v6 0/4] Add Mediatek MT8173 cpufreq driver Pi-Cheng Chen
2015-07-09 10:27 ` Pi-Cheng Chen
2015-07-09 10:27 ` [PATCH v6 1/4] dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings Pi-Cheng Chen
2015-07-09 10:27 ` Pi-Cheng Chen
2015-07-09 14:55 ` Michael Turquette [this message]
2015-07-09 14:55 ` Michael Turquette
[not found] ` <1436437661-17606-1-git-send-email-pi-cheng.chen-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-07-09 10:27 ` [PATCH v6 2/4] dt-bindings: mediatek: Add MT8173 cpufreq driver bindings Pi-Cheng Chen
2015-07-09 10:27 ` Pi-Cheng Chen
2015-07-09 10:27 ` Pi-Cheng Chen
2015-07-09 10:32 ` Viresh Kumar
2015-07-09 10:32 ` Viresh Kumar
2015-07-09 10:27 ` [PATCH v6 4/4] arm64: dts: mt8173: Add mt8173 cpufreq driver support Pi-Cheng Chen
2015-07-09 10:27 ` Pi-Cheng Chen
2015-07-09 10:27 ` Pi-Cheng Chen
2015-07-09 10:27 ` [PATCH v6 3/4] cpufreq: mediatek: Add MT8173 cpufreq driver Pi-Cheng Chen
2015-07-09 10:27 ` Pi-Cheng Chen
2015-07-09 10:34 ` [PATCH v6 0/4] Add Mediatek " Viresh Kumar
2015-07-09 10:34 ` Viresh Kumar
2015-08-02 7:27 ` Viresh Kumar
2015-08-02 7:27 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150709145551.9112.35610@quantum \
--to=mturquette@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=pi-cheng.chen@linaro.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.