Re: [PATCH v2 0/2] Implement sample time consideration for Vybrid's ADC

[Shawn Guo <shawnguo@kernel.org>]

On Wed, Jun 24, 2015 at 02:03:39PM +0530, Sanchayan Maity wrote:
> Hello,
> 
> This patchset adds a dt binding for specifying sample time
> for the vybrid adc driver and takes this into account for
> sampling frequency calculation and related configuration in
> the driver.
> 
> The patchset is based on top of Stefan's patches here
> http://lkml.iu.edu/hypermail/linux/kernel/1505.3/02043.html
> 
> which got recently applied. Tested with shawn's for-next
> branch.
> 
> Changes since v1:
> 
> Change from a vendor specific fsl,min-sample-time to non vendor
> specific min-sample-time.

What's the reason for that?  Property without vendor prefix would be
the generic one, which should be defined by generic ADC bindings, not
vf610-adc.txt.

Shawn

> 
> Version 1 of the patchset can be found here
> http://lkml.iu.edu/hypermail/linux/kernel/1506.1/00026.html
> 
> - Sanchayan.
> 
> Sanchayan Maity (2):
>   iio: adc: Determine sampling frequencies by using minimum sample time
>   ARM: dts: vfxxx: Add property for minimum sample time
> 
>  .../devicetree/bindings/iio/adc/vf610-adc.txt      |  6 ++
>  arch/arm/boot/dts/vfxxx.dtsi                       |  2 +
>  drivers/iio/adc/vf610_adc.c                        | 74 ++++++++++++++++++++--
>  3 files changed, 78 insertions(+), 4 deletions(-)
> 
> -- 
> 2.4.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>