From: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
To: Ash Charles <ashcharles-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: "linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Adam YH Lee <adam.yh.lee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Arun Bharadwaj <arun-EiDWdcs9+yZBDgjK7y7TUQ@public.gmane.org>
Subject: Re: [PATCH V2] arm:DTS Correct audio input route & set mic bias
Date: Tue, 14 Jul 2015 22:30:05 -0700 [thread overview]
Message-ID: <20150715053005.GX17550@atomide.com> (raw)
In-Reply-To: <CAK8F28=0ttDiyzNKkYog7Pe_qWXGSRXkE_vOZ1QNpQiwbY0Vxw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
* Ash Charles <ashcharles-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> [150714 11:41]:
> On Tue, Jul 14, 2015 at 11:17 AM, Adam YH Lee <adam.yh.lee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> > Audio-in was incorrectly routed to Line In. It should be Mic3L as per
> > schematic.
> >
> > Using mic-bias voltage at 2.0v (<0x1>) does not work for some reason. There
> > is no voltage seen on micbias (R127). Mic-bias voltage of 2.5v (<0x2>) works.
> > I see voltage of 2.475v across GND and micbias.
> >
> > With these changes, I can record audio with a pair of proliferate TRRS earbuds.
> >
> > Signed-off-by: Adam YH Lee <adam.yh.lee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > ---
> > arch/arm/boot/dts/am335x-pepper.dts | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
> > index d627dc6..73b4cc3 100644
> > --- a/arch/arm/boot/dts/am335x-pepper.dts
> > +++ b/arch/arm/boot/dts/am335x-pepper.dts
> > @@ -74,6 +74,7 @@
> > audio_codec: tlv320aic3106@1b {
> > compatible = "ti,tlv320aic3106";
> > reg = <0x1b>;
> > + ai3x-micbias-vg = <0x2>;
> > };
> >
> > accel: lis331dlh@1d {
> > @@ -152,7 +153,7 @@
> > ti,audio-routing =
> > "Headphone Jack", "HPLOUT",
> > "Headphone Jack", "HPROUT",
> > - "LINE1L", "Line In";
> > + "MIC3L", "Mic3L Switch";
> > };
> >
> > &mcasp0 {
> Note, this is getting resent to correct the sign-offs as requested
> https://lkml.org/lkml/2015/7/14/56
> Acked-by: Ash Charles <ashcharles-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Thanks applying into omap-for-v4.2/fixes.
Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2] arm:DTS Correct audio input route & set mic bias
Date: Tue, 14 Jul 2015 22:30:05 -0700 [thread overview]
Message-ID: <20150715053005.GX17550@atomide.com> (raw)
In-Reply-To: <CAK8F28=0ttDiyzNKkYog7Pe_qWXGSRXkE_vOZ1QNpQiwbY0Vxw@mail.gmail.com>
* Ash Charles <ashcharles@gmail.com> [150714 11:41]:
> On Tue, Jul 14, 2015 at 11:17 AM, Adam YH Lee <adam.yh.lee@gmail.com> wrote:
> > Audio-in was incorrectly routed to Line In. It should be Mic3L as per
> > schematic.
> >
> > Using mic-bias voltage at 2.0v (<0x1>) does not work for some reason. There
> > is no voltage seen on micbias (R127). Mic-bias voltage of 2.5v (<0x2>) works.
> > I see voltage of 2.475v across GND and micbias.
> >
> > With these changes, I can record audio with a pair of proliferate TRRS earbuds.
> >
> > Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com>
> > ---
> > arch/arm/boot/dts/am335x-pepper.dts | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
> > index d627dc6..73b4cc3 100644
> > --- a/arch/arm/boot/dts/am335x-pepper.dts
> > +++ b/arch/arm/boot/dts/am335x-pepper.dts
> > @@ -74,6 +74,7 @@
> > audio_codec: tlv320aic3106 at 1b {
> > compatible = "ti,tlv320aic3106";
> > reg = <0x1b>;
> > + ai3x-micbias-vg = <0x2>;
> > };
> >
> > accel: lis331dlh at 1d {
> > @@ -152,7 +153,7 @@
> > ti,audio-routing =
> > "Headphone Jack", "HPLOUT",
> > "Headphone Jack", "HPROUT",
> > - "LINE1L", "Line In";
> > + "MIC3L", "Mic3L Switch";
> > };
> >
> > &mcasp0 {
> Note, this is getting resent to correct the sign-offs as requested
> https://lkml.org/lkml/2015/7/14/56
> Acked-by: Ash Charles <ashcharles@gmail.com>
Thanks applying into omap-for-v4.2/fixes.
Tony
next prev parent reply other threads:[~2015-07-15 5:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-14 18:17 [PATCH V2] arm:DTS Correct audio input route & set mic bias Adam YH Lee
2015-07-14 18:17 ` Adam YH Lee
[not found] ` <1436897844-6908-1-git-send-email-adam.yh.lee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-07-14 18:38 ` Ash Charles
2015-07-14 18:38 ` Ash Charles
[not found] ` <CAK8F28=0ttDiyzNKkYog7Pe_qWXGSRXkE_vOZ1QNpQiwbY0Vxw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-15 5:30 ` Tony Lindgren [this message]
2015-07-15 5:30 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150715053005.GX17550@atomide.com \
--to=tony-4v6ys6ai5vpbdgjk7y7tuq@public.gmane.org \
--cc=adam.yh.lee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=arun-EiDWdcs9+yZBDgjK7y7TUQ@public.gmane.org \
--cc=ashcharles-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.