All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lukasz Majewski <l.majewski@majess.pl>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/8] dfu: tftp: update: Provide tftp support for the DFU subsystem
Date: Thu, 16 Jul 2015 22:06:07 +0200	[thread overview]
Message-ID: <20150716220607.7ea71d9b@jawa> (raw)
In-Reply-To: <CANr=Z=YZE-9wgZbnCEVrteFbB7hBByChkPZ79zk3P6KavGrT_A@mail.gmail.com>

Hi Joe,

> Hi Lukasz,
> 
> On Sun, Jul 12, 2015 at 10:30 AM, Lukasz Majewski
> <l.majewski@majess.pl> wrote:
> > This commit adds initial support for using tftp for downloading and
> > upgrading firmware on the device.
> >
> > Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
> > ---
> >  drivers/dfu/Makefile   |  1 +
> >  drivers/dfu/dfu_tftp.c | 76
> > ++++++++++++++++++++++++++++++++++++++++++++++++++
> > include/dfu.h          | 11 ++++++++ 3 files changed, 88
> > insertions(+) create mode 100644 drivers/dfu/dfu_tftp.c
> >
> > diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile
> > index 5cc535e..43249ce 100644
> > --- a/drivers/dfu/Makefile
> > +++ b/drivers/dfu/Makefile
> > @@ -10,3 +10,4 @@ obj-$(CONFIG_DFU_MMC) += dfu_mmc.o
> >  obj-$(CONFIG_DFU_NAND) += dfu_nand.o
> >  obj-$(CONFIG_DFU_RAM) += dfu_ram.o
> >  obj-$(CONFIG_DFU_SF) += dfu_sf.o
> > +obj-$(CONFIG_DFU_TFTP) += dfu_tftp.o
> > diff --git a/drivers/dfu/dfu_tftp.c b/drivers/dfu/dfu_tftp.c
> > new file mode 100644
> > index 0000000..26539f2
> > --- /dev/null
> > +++ b/drivers/dfu/dfu_tftp.c
> > @@ -0,0 +1,76 @@
> > +/*
> > + * (C) Copyright 2015
> > + * Lukasz Majewski <l.majewski@majess.pl>
> > + *
> > + * SPDX-License-Identifier:    GPL-2.0+
> > + */
> > +
> > +#include <common.h>
> > +#include <malloc.h>
> > +#include <errno.h>
> > +#include <dfu.h>
> > +
> > +int dfu_tftp_write(char *dfu_entity_name, unsigned int addr,
> > unsigned int len) +{
> > +       char *s, *sb, *interface, *devstring;
> > +       int alt_setting_num, ret;
> > +       struct dfu_entity *dfu;
> > +
> > +       debug("%s: name: %s addr: 0x%x len: %d\n", __func__,
> > dfu_entity_name,
> > +             addr, len);
> > +
> > +       interface = getenv("update_tftp_dfu_interface");
> > +       if (interface == NULL) {
> > +               error("TFTP DFU: 'interface' not defined\n");
> > +               return -EINVAL;
> > +       }
> > +
> > +       devstring = getenv("update_tftp_dfu_devstring");
> > +       if (devstring == NULL) {
> > +               error("TFTP DFU: 'devstring' not defined\n");
> > +               return -EINVAL;
> > +       }
> 
> It would be great if these env vars could be moved to command
> parameters.

Those parameters are necessary to perform update (via update_tftp())
during boot time.

Normally - when user call 'dfutftp' command he/she needs to specify
this informaiton. (e.g. 'dfutftp 0 mmc 1').

> 
> > +
> > +       ret = dfu_init_env_entities(interface, devstring);
> > +       if (ret)
> > +               goto done;
> > +
> > +       /*
> > +        * We need to copy name pointed by *dfu_entity_name since
> > this text
> > +        * is the integral part of the FDT image.
> > +        * Any implicit modification (i.e. done by strsep()) will
> > corrupt
> > +        * the FDT image and prevent other images to be stored.
> > +        */
> > +       s = strdup(dfu_entity_name);
> > +       sb = s;
> > +       if (!s) {
> > +               ret = -ENOMEM;
> > +               goto done;
> > +       }
> > +
> > +       strsep(&s, "@");
> > +       debug("%s: image name: %s strlen: %d\n", __func__, sb,
> > strlen(sb)); +
> > +       alt_setting_num = dfu_get_alt(sb);
> > +       free(sb);
> > +       if (alt_setting_num < 0) {
> > +               error("Alt setting [%d] to write not found!",
> > +                     alt_setting_num);
> > +               ret = -ENODEV;
> > +               goto done;
> > +       }
> > +
> > +       dfu = dfu_get_entity(alt_setting_num);
> > +       if (!dfu) {
> > +               error("DFU entity for alt: %d not found!",
> > alt_setting_num);
> > +               ret = -ENODEV;
> > +               goto done;
> > +       }
> > +
> > +       ret = dfu_write_from_mem_addr(dfu, (void *)addr, len);
> > +
> > +done:
> > +       dfu_free_entities();
> > +
> > +       return ret;
> > +}
> > diff --git a/include/dfu.h b/include/dfu.h
> > index 7d31abd..adad863 100644
> > --- a/include/dfu.h
> > +++ b/include/dfu.h
> > @@ -207,5 +207,16 @@ static inline int dfu_fill_entity_sf(struct
> > dfu_entity *dfu, char *devstr, }
> >  #endif
> >
> > +#ifdef CONFIG_DFU_TFTP
> > +int dfu_tftp_write(char *dfu_entity_name, unsigned int addr,
> > unsigned int len); +#else
> > +static inline int dfu_tftp_write(char *dfu_entity_name, unsigned
> > int addr,
> > +                                unsigned int len)
> > +{
> > +       puts("TFTP write support for DFU not available!\n");
> > +       return -1;
> 
> This should be -ENOSYS probably.

Good point - thanks!

> 
> > +}
> > +#endif
> > +
> >  int dfu_add(struct usb_configuration *c);
> >  #endif /* __DFU_ENTITY_H_ */
> > --
> > 2.1.4
> >
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot

Best regards,
Lukasz Majewski
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150716/e0afce0c/attachment.sig>

  reply	other threads:[~2015-07-16 20:06 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-12 15:30 [U-Boot] [PATCH 0/8] dfu: tftp: update: Support for DFU upgrades via ETH (TFTP) Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 1/8] doc: dfu: tftp: README entry for TFTP extension of DFU Lukasz Majewski
2015-07-15 18:14   ` Joe Hershberger
2015-07-16 19:59     ` Lukasz Majewski
2015-07-17 19:28       ` Joe Hershberger
2015-07-20 18:59         ` Lukasz Majewski
2015-07-20 19:17           ` Joe Hershberger
2015-07-20 20:09             ` Tormod Volden
2015-07-21 21:55             ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 2/8] net: tftp: Move tftp.h file from ./net to ./include Lukasz Majewski
2015-07-15 18:17   ` Joe Hershberger
2015-07-16 20:02     ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 3/8] tftp: update: Allow some parts of the code to be reused when CONFIG_SYS_NO_FLASH is set Lukasz Majewski
2015-07-15 18:19   ` Joe Hershberger
2015-07-12 15:30 ` [U-Boot] [PATCH 4/8] dfu: tftp: update: Provide tftp support for the DFU subsystem Lukasz Majewski
2015-07-15 18:24   ` Joe Hershberger
2015-07-16 20:06     ` Lukasz Majewski [this message]
2015-07-17 19:35       ` Joe Hershberger
2015-07-20 19:03         ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 5/8] dfu: tftp: update: Add dfu_write_from_mem_addr() function Lukasz Majewski
2015-07-15 18:33   ` Joe Hershberger
2015-07-16 20:07     ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 6/8] update: tftp: dfu: Extend update_tftp() function to support DFU Lukasz Majewski
2015-07-15 18:35   ` Joe Hershberger
2015-07-16 20:11     ` Lukasz Majewski
2015-07-17 19:38       ` Joe Hershberger
2015-07-20 19:05         ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 7/8] dfu: command: Provide support for 'dfutftp' command to handle receiving data via TFTP Lukasz Majewski
2015-07-15 18:39   ` Joe Hershberger
2015-07-16 20:26     ` Lukasz Majewski
2015-07-17 19:40       ` Joe Hershberger
2015-07-20 17:59         ` Lukasz Majewski
2015-07-20 18:11           ` Joe Hershberger
2015-07-12 15:30 ` [U-Boot] [PATCH 8/8] config: bbb: Configs necessary for running update via TFTP on Beagle Bone Black Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150716220607.7ea71d9b@jawa \
    --to=l.majewski@majess.pl \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.