From: Lukasz Majewski <l.majewski@majess.pl>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/8] dfu: tftp: update: Provide tftp support for the DFU subsystem
Date: Mon, 20 Jul 2015 21:03:02 +0200 [thread overview]
Message-ID: <20150720210302.0abcfe34@jawa> (raw)
In-Reply-To: <CANr=Z=ZawfAsyKf9hk_T+HxNnpSCr34=XJyF9KXX3Cyki6OPsQ@mail.gmail.com>
On Fri, 17 Jul 2015 14:35:39 -0500
Joe Hershberger <joe.hershberger@gmail.com> wrote:
> Hi Lukasz,
>
> On Thu, Jul 16, 2015 at 3:06 PM, Lukasz Majewski
> <l.majewski@majess.pl> wrote:
> > Hi Joe,
> >
> >> Hi Lukasz,
> >>
> >> On Sun, Jul 12, 2015 at 10:30 AM, Lukasz Majewski
> >> <l.majewski@majess.pl> wrote:
> >> > This commit adds initial support for using tftp for downloading
> >> > and upgrading firmware on the device.
> >> >
> >> > Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
> >> > ---
> >> > drivers/dfu/Makefile | 1 +
> >> > drivers/dfu/dfu_tftp.c | 76
> >> > ++++++++++++++++++++++++++++++++++++++++++++++++++
> >> > include/dfu.h | 11 ++++++++ 3 files changed, 88
> >> > insertions(+) create mode 100644 drivers/dfu/dfu_tftp.c
> >> >
> >> > diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile
> >> > index 5cc535e..43249ce 100644
> >> > --- a/drivers/dfu/Makefile
> >> > +++ b/drivers/dfu/Makefile
> >> > @@ -10,3 +10,4 @@ obj-$(CONFIG_DFU_MMC) += dfu_mmc.o
> >> > obj-$(CONFIG_DFU_NAND) += dfu_nand.o
> >> > obj-$(CONFIG_DFU_RAM) += dfu_ram.o
> >> > obj-$(CONFIG_DFU_SF) += dfu_sf.o
> >> > +obj-$(CONFIG_DFU_TFTP) += dfu_tftp.o
> >> > diff --git a/drivers/dfu/dfu_tftp.c b/drivers/dfu/dfu_tftp.c
> >> > new file mode 100644
> >> > index 0000000..26539f2
> >> > --- /dev/null
> >> > +++ b/drivers/dfu/dfu_tftp.c
> >> > @@ -0,0 +1,76 @@
> >> > +/*
> >> > + * (C) Copyright 2015
> >> > + * Lukasz Majewski <l.majewski@majess.pl>
> >> > + *
> >> > + * SPDX-License-Identifier: GPL-2.0+
> >> > + */
> >> > +
> >> > +#include <common.h>
> >> > +#include <malloc.h>
> >> > +#include <errno.h>
> >> > +#include <dfu.h>
> >> > +
> >> > +int dfu_tftp_write(char *dfu_entity_name, unsigned int addr,
> >> > unsigned int len) +{
> >> > + char *s, *sb, *interface, *devstring;
> >> > + int alt_setting_num, ret;
> >> > + struct dfu_entity *dfu;
> >> > +
> >> > + debug("%s: name: %s addr: 0x%x len: %d\n", __func__,
> >> > dfu_entity_name,
> >> > + addr, len);
> >> > +
> >> > + interface = getenv("update_tftp_dfu_interface");
> >> > + if (interface == NULL) {
> >> > + error("TFTP DFU: 'interface' not defined\n");
> >> > + return -EINVAL;
> >> > + }
> >> > +
> >> > + devstring = getenv("update_tftp_dfu_devstring");
> >> > + if (devstring == NULL) {
> >> > + error("TFTP DFU: 'devstring' not defined\n");
> >> > + return -EINVAL;
> >> > + }
> >>
> >> It would be great if these env vars could be moved to command
> >> parameters.
> >
> > Those parameters are necessary to perform update (via update_tftp())
> > during boot time.
>
> This is just the old method, right? Not the new DFU stuff.
Yes, this is the part of legacy code.
>
> > Normally - when user call 'dfutftp' command he/she needs to specify
> > this informaiton. (e.g. 'dfutftp 0 mmc 1').
>
> Perfect - so specify it when you call it from preboot.
I think that it would be feasible to use preboot variable for early
booting.
The problem is with CONFIG_UPDATE_TFTP flag. I will try to find
solution for this issue.
>
> >> > +
> >> > + ret = dfu_init_env_entities(interface, devstring);
> >> > + if (ret)
> >> > + goto done;
> >> > +
> >> > + /*
> >> > + * We need to copy name pointed by *dfu_entity_name since
> >> > this text
> >> > + * is the integral part of the FDT image.
> >> > + * Any implicit modification (i.e. done by strsep()) will
> >> > corrupt
> >> > + * the FDT image and prevent other images to be stored.
> >> > + */
> >> > + s = strdup(dfu_entity_name);
> >> > + sb = s;
> >> > + if (!s) {
> >> > + ret = -ENOMEM;
> >> > + goto done;
> >> > + }
> >> > +
> >> > + strsep(&s, "@");
> >> > + debug("%s: image name: %s strlen: %d\n", __func__, sb,
> >> > strlen(sb)); +
> >> > + alt_setting_num = dfu_get_alt(sb);
> >> > + free(sb);
> >> > + if (alt_setting_num < 0) {
> >> > + error("Alt setting [%d] to write not found!",
> >> > + alt_setting_num);
> >> > + ret = -ENODEV;
> >> > + goto done;
> >> > + }
> >> > +
> >> > + dfu = dfu_get_entity(alt_setting_num);
> >> > + if (!dfu) {
> >> > + error("DFU entity for alt: %d not found!",
> >> > alt_setting_num);
> >> > + ret = -ENODEV;
> >> > + goto done;
> >> > + }
> >> > +
> >> > + ret = dfu_write_from_mem_addr(dfu, (void *)addr, len);
> >> > +
> >> > +done:
> >> > + dfu_free_entities();
> >> > +
> >> > + return ret;
> >> > +}
> >> > diff --git a/include/dfu.h b/include/dfu.h
> >> > index 7d31abd..adad863 100644
> >> > --- a/include/dfu.h
> >> > +++ b/include/dfu.h
> >> > @@ -207,5 +207,16 @@ static inline int dfu_fill_entity_sf(struct
> >> > dfu_entity *dfu, char *devstr, }
> >> > #endif
> >> >
> >> > +#ifdef CONFIG_DFU_TFTP
> >> > +int dfu_tftp_write(char *dfu_entity_name, unsigned int addr,
> >> > unsigned int len); +#else
> >> > +static inline int dfu_tftp_write(char *dfu_entity_name, unsigned
> >> > int addr,
> >> > + unsigned int len)
> >> > +{
> >> > + puts("TFTP write support for DFU not available!\n");
> >> > + return -1;
> >>
> >> This should be -ENOSYS probably.
> >
> > Good point - thanks!
> >
> >>
> >> > +}
> >> > +#endif
> >> > +
> >> > int dfu_add(struct usb_configuration *c);
> >> > #endif /* __DFU_ENTITY_H_ */
> >> > --
> >> > 2.1.4
> >> >
> >> > _______________________________________________
> >> > U-Boot mailing list
> >> > U-Boot at lists.denx.de
> >> > http://lists.denx.de/mailman/listinfo/u-boot
> >
> > Best regards,
> > Lukasz Majewski
Best regards,
Lukasz Majewski
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150720/a2aeddcc/attachment.sig>
next prev parent reply other threads:[~2015-07-20 19:03 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-12 15:30 [U-Boot] [PATCH 0/8] dfu: tftp: update: Support for DFU upgrades via ETH (TFTP) Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 1/8] doc: dfu: tftp: README entry for TFTP extension of DFU Lukasz Majewski
2015-07-15 18:14 ` Joe Hershberger
2015-07-16 19:59 ` Lukasz Majewski
2015-07-17 19:28 ` Joe Hershberger
2015-07-20 18:59 ` Lukasz Majewski
2015-07-20 19:17 ` Joe Hershberger
2015-07-20 20:09 ` Tormod Volden
2015-07-21 21:55 ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 2/8] net: tftp: Move tftp.h file from ./net to ./include Lukasz Majewski
2015-07-15 18:17 ` Joe Hershberger
2015-07-16 20:02 ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 3/8] tftp: update: Allow some parts of the code to be reused when CONFIG_SYS_NO_FLASH is set Lukasz Majewski
2015-07-15 18:19 ` Joe Hershberger
2015-07-12 15:30 ` [U-Boot] [PATCH 4/8] dfu: tftp: update: Provide tftp support for the DFU subsystem Lukasz Majewski
2015-07-15 18:24 ` Joe Hershberger
2015-07-16 20:06 ` Lukasz Majewski
2015-07-17 19:35 ` Joe Hershberger
2015-07-20 19:03 ` Lukasz Majewski [this message]
2015-07-12 15:30 ` [U-Boot] [PATCH 5/8] dfu: tftp: update: Add dfu_write_from_mem_addr() function Lukasz Majewski
2015-07-15 18:33 ` Joe Hershberger
2015-07-16 20:07 ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 6/8] update: tftp: dfu: Extend update_tftp() function to support DFU Lukasz Majewski
2015-07-15 18:35 ` Joe Hershberger
2015-07-16 20:11 ` Lukasz Majewski
2015-07-17 19:38 ` Joe Hershberger
2015-07-20 19:05 ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 7/8] dfu: command: Provide support for 'dfutftp' command to handle receiving data via TFTP Lukasz Majewski
2015-07-15 18:39 ` Joe Hershberger
2015-07-16 20:26 ` Lukasz Majewski
2015-07-17 19:40 ` Joe Hershberger
2015-07-20 17:59 ` Lukasz Majewski
2015-07-20 18:11 ` Joe Hershberger
2015-07-12 15:30 ` [U-Boot] [PATCH 8/8] config: bbb: Configs necessary for running update via TFTP on Beagle Bone Black Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150720210302.0abcfe34@jawa \
--to=l.majewski@majess.pl \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.