Re: [PATCH v2 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property

[Lee Jones <lee.jones@linaro.org>]

On Fri, 17 Jul 2015, Javier Martinez Canillas wrote:

> The regulator-compatible property from the regulator DT binding was
> deprecated. But the max77686 DT binding doc still suggest to use it
> instead of the regulator node name's which is the correct approach.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

By convention shouldn't this be buck@1, or something?

Need Mark to look at this.

> ---
> 
> Changes in v2:
> - Add Krzysztof Kozlowski Reviewed-by tag in patch #1.
> 
>  Documentation/devicetree/bindings/mfd/max77686.txt | 11 ++++-------
>  1 file changed, 4 insertions(+), 7 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
> index 163bd81a4607..8221102d3fc2 100644
> --- a/Documentation/devicetree/bindings/mfd/max77686.txt
> +++ b/Documentation/devicetree/bindings/mfd/max77686.txt
> @@ -26,7 +26,7 @@ Optional node:
>  	};
>  	refer Documentation/devicetree/bindings/regulator/regulator.txt
>  
> -  The regulator-compatible property of regulator should initialized with string
> +  The regulator node's name should be initialized with a string
>  to get matched with their hardware counterparts as follow:
>  
>  	-LDOn 	:	for LDOs, where n can lie in range 1 to 26.
> @@ -55,16 +55,14 @@ Example:
>  		reg = <0x09>;
>  
>  		voltage-regulators {
> -			ldo11_reg {
> -				regulator-compatible = "LDO11";
> +			ldo11_reg: LDO11 {
>  				regulator-name = "vdd_ldo11";
>  				regulator-min-microvolt = <1900000>;
>  				regulator-max-microvolt = <1900000>;
>  				regulator-always-on;
>  			};
>  
> -			buck1_reg {
> -				regulator-compatible = "BUCK1";
> +			buck1_reg: BUCK1 {
>  				regulator-name = "vdd_mif";
>  				regulator-min-microvolt = <950000>;
>  				regulator-max-microvolt = <1300000>;
> @@ -72,8 +70,7 @@ Example:
>  				regulator-boot-on;
>  			};
>  
> -			buck9_reg {
> -				regulator-compatible = "BUCK9";
> +			buck9_reg: BUCK9 {
>  				regulator-name = "CAM_ISP_CORE_1.2V";
>  				regulator-min-microvolt = <1000000>;
>  				regulator-max-microvolt = <1200000>;

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog