From: Michael Welling <mwelling@ieee.org>
To: Pavel Machek <pavel@ucw.cz>
Cc: "Pali Rohár" <pali.rohar@gmail.com>,
"Sebastian Reichel" <sre@kernel.org>,
"Tony Lindgren" <tony@atomide.com>,
"Ivaylo Dimitrov" <ivo.g.dimitrov.75@gmail.com>,
"Aaro Koskinen" <aaro.koskinen@iki.fi>,
"Nishanth Menon" <nm@ti.com>,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: linux 4.2-rc1 broken Nokia N900
Date: Tue, 21 Jul 2015 16:28:52 -0500 [thread overview]
Message-ID: <20150721212852.GA29640@deathstar> (raw)
In-Reply-To: <20150721093441.GA23241@amd>
On Tue, Jul 21, 2015 at 11:34:41AM +0200, Pavel Machek wrote:
> Actually.. for the record I'm _not_ using modules. So either I hit
> something different, or problem happens regardless of modules.
> Pavel
I was able to reproduce the error by using my Beagleboard.
I added a registration for the tsc2005 and built the driver as a module.
[ 4.318878] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa09802c
[ 4.326934] pgd = cf114000
[ 4.329742] [fa09802c] *pgd=48011452(bad)
[ 4.333953] Internal error: : 1028 [#1] PREEMPT ARM
[ 4.339050] Modules linked in: tsc2005(+) twl4030_wdt(+) rtc_twl(+) omap_ssi hsi
[ 4.346832] CPU: 0 PID: 74 Comm: udevd Not tainted 4.2.0-rc3+ #2
[ 4.353118] Hardware name: Generic OMAP3-GP (Flattened Device Tree)
[ 4.359680] task: cf0a8f00 ti: cf112000 task.ti: cf112000
[ 4.365356] PC is at omap2_mcspi_set_cs+0x3c/0x44
[ 4.370269] LR is at spi_setup+0xd4/0x10c
[ 4.374450] pc : [<c0328b5c>] lr : [<c0326a6c>] psr: 200f0113
[ 4.374450] sp : cf113d48 ip : 00000001 fp : 00000fff
[ 4.386474] r10: cf31ffe4 r9 : 00000000 r8 : 00000008
[ 4.391937] r7 : 00000fff r6 : 00000000 r5 : 00000000 r4 : cfbdbe00
[ 4.398773] r3 : 200103dc r2 : fa098000 r1 : 00000001 r0 : cfbdbe00
[ 4.405578] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 4.413055] Control: 10c5387d Table: 8f114019 DAC: 00000015
[ 4.419067] Process udevd (pid: 74, stack limit = 0xcf112210)
[ 4.425079] Stack: (0xcf113d48 to 0xcf114000)
[ 4.429626] 3d40: cfbdbe00 cfbdbe00 cfce7ab8 bf017ac8 cfbdd5a0 c015dc08
[ 4.438201] 3d60: cf352190 00000000 00000fff 00000004 00000008 00000002 00000118 00001f40
[ 4.446746] 3d80: 00000001 bf0183cc cfbdbe00 00000000 bf0183dc 00000008 00000001 cf31ffe4
[ 4.455322] 3da0: cf31ffc8 c0326458 c0326408 cfbdbe00 c073e81c c02e7ca0 cfbdbe00 cfbdbe34
[ 4.463867] 3dc0: bf0183dc c06e8254 c06aefe0 c02e7e6c 00000000 bf0183dc c02e7e04 c02e6530
[ 4.472442] 3de0: cf964c4c cfbd89b0 bf0183dc 00000000 cf322200 c02e74e8 bf01830f bf018310
[ 4.480987] 3e00: 00000000 bf0183dc bf01a000 00000000 c06aefe0 c02e8904 00000000 cf353080
[ 4.489562] 3e20: bf01a000 c0009640 cf978000 00000001 00000000 00000000 00000001 00000000
[ 4.498107] 3e40: cf07c008 00150013 cf07c000 600f0113 c06db824 c06db824 cfedf9c0 0040003f
[ 4.506683] 3e60: cfedf9c0 00150013 cfcf9000 00080000 cf801f00 000000d0 bf018440 bf018440
[ 4.515228] 3e80: 00000001 cf353040 bf018488 cf31ffc0 00000001 c046c4b8 bf018440 c06ffb90
[ 4.523803] 3ea0: cf113f58 00000001 bf018440 c00875b0 bf01844c 00007fff 00000000 c0084f8c
[ 4.532348] 3ec0: c0084b28 bf018614 bf018640 00000000 00026d29 d09c503c b6f0aec0 c0084c60
[ 4.540924] 3ee0: d09a8000 00026d29 000003e9 00000000 0b300002 00000000 00000000 00000000
[ 4.549468] 3f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.558044] 3f20: 00000000 00000000 00000000 00000000 00000138 00000000 b6f0aec0 00000005
[ 4.566589] 3f40: 0000017b c000ebc4 cf112000 00000000 bef58e70 c0087bec d09a8000 00026d29
[ 4.575134] 3f60: d09c4934 d09c4764 d09ce71c 00001640 000019e0 00000000 00000000 00000000
[ 4.583709] 3f80: 0000002d 0000002e 00000017 00000014 00000012 00000000 00000000 0004a898
[ 4.592254] 3fa0: 00000000 c000ea40 00000000 0004a898 00000005 b6f0aec0 00000000 00020000
[ 4.600830] 3fc0: 00000000 0004a898 00000000 0000017b 00000000 0004a898 0004aa30 bef58e70
[ 4.609374] 3fe0: bef58d98 bef58d88 b6f0399c b6e93ed0 60070010 00000005 00000000 00000000
[ 4.617950] [<c0328b5c>] (omap2_mcspi_set_cs) from [<c0326a6c>] (spi_setup+0xd4/0x10c)
[ 4.626281] [<c0326a6c>] (spi_setup) from [<bf017ac8>] (tsc2005_probe+0x108/0x5d4 [tsc2005])
[ 4.635131] [<bf017ac8>] (tsc2005_probe [tsc2005]) from [<c0326458>] (spi_drv_probe+0x50/0x6c)
[ 4.644165] [<c0326458>] (spi_drv_probe) from [<c02e7ca0>] (driver_probe_device+0xf4/0x258)
[ 4.652893] [<c02e7ca0>] (driver_probe_device) from [<c02e7e6c>] (__driver_attach+0x68/0x8c)
[ 4.661743] [<c02e7e6c>] (__driver_attach) from [<c02e6530>] (bus_for_each_dev+0x6c/0x90)
[ 4.670318] [<c02e6530>] (bus_for_each_dev) from [<c02e74e8>] (bus_add_driver+0xcc/0x1e4)
[ 4.678863] [<c02e74e8>] (bus_add_driver) from [<c02e8904>] (driver_register+0x9c/0xe0)
[ 4.687255] [<c02e8904>] (driver_register) from [<c0009640>] (do_one_initcall+0x100/0x1b0)
[ 4.695922] [<c0009640>] (do_one_initcall) from [<c046c4b8>] (do_init_module+0x58/0x1c0)
[ 4.704406] [<c046c4b8>] (do_init_module) from [<c00875b0>] (load_module+0x16ac/0x1b64)
[ 4.712799] [<c00875b0>] (load_module) from [<c0087bec>] (SyS_finit_module+0x60/0x68)
[ 4.721008] [<c0087bec>] (SyS_finit_module) from [<c000ea40>] (ret_fast_syscall+0x0/0x3c)
[ 4.729553] Code: e5823018 e5902188 e5922000 e582302c (e592302c)
[ 4.735961] ---[ end trace 375298308353557f ]---
Now to figure out why this is happening.
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2015-07-21 21:28 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-11 12:05 linux 4.2-rc1 broken Nokia N900 Pali Rohár
2015-07-13 6:44 ` Tony Lindgren
2015-07-13 8:09 ` Sebastian Reichel
2015-07-13 17:03 ` Michael Welling
2015-07-13 17:09 ` Pali Rohár
2015-07-13 17:56 ` Michael Welling
2015-07-13 20:28 ` Michael Welling
2015-07-13 20:34 ` Pali Rohár
2015-07-13 21:52 ` Michael Welling
2015-07-13 22:02 ` Pali Rohár
2015-07-13 22:36 ` Michael Welling
2015-07-14 7:14 ` Pali Rohár
2015-07-14 7:45 ` Tony Lindgren
2015-07-14 16:33 ` Michael Welling
2015-07-14 20:01 ` Pavel Machek
2015-07-14 20:17 ` Michael Welling
2015-07-15 19:49 ` Pavel Machek
2015-07-15 20:10 ` Michael Welling
2015-07-21 7:31 ` Pavel Machek
2015-07-21 7:33 ` Pavel Machek
2015-07-21 8:04 ` Pali Rohár
2015-07-20 20:48 ` Michael Welling
2015-07-20 20:46 ` Michael Welling
2015-07-20 20:58 ` Pali Rohár
2015-07-21 9:34 ` Pavel Machek
2015-07-21 21:28 ` Michael Welling [this message]
2015-07-22 0:17 ` Michael Welling
2015-07-22 2:03 ` Sebastian Reichel
2015-07-22 5:13 ` Michael Welling
2015-07-22 7:27 ` Pali Rohár
2015-07-22 13:33 ` Sebastian Reichel
2015-07-22 14:27 ` Pali Rohár
2015-07-22 13:30 ` Pavel Machek
2015-07-25 8:55 ` Pali Rohár
2015-07-28 8:39 ` Pali Rohár
2015-07-28 12:26 ` Sebastian Reichel
2015-07-28 12:32 ` Pali Rohár
2015-07-13 11:10 ` Pali Rohár
2015-07-13 13:26 ` Tony Lindgren
2015-07-13 15:51 ` Sebastian Reichel
2015-07-13 16:05 ` Pali Rohár
2015-07-13 19:32 ` Sebastian Reichel
2015-07-14 0:18 ` Krzysztof Kozlowski
2015-07-24 8:18 ` Dave Young
2015-07-24 8:30 ` Ivaylo Dimitrov
2015-07-24 10:28 ` Dave Young
2015-07-24 10:53 ` Pali Rohár
2015-07-24 8:40 ` Pali Rohár
2015-07-24 10:33 ` Dave Young
2015-07-24 10:52 ` Pali Rohár
2015-07-24 15:50 ` Pali Rohár
2015-07-24 8:51 ` Pavel Machek
2015-07-24 10:39 ` Dave Young
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150721212852.GA29640@deathstar \
--to=mwelling@ieee.org \
--cc=aaro.koskinen@iki.fi \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=pali.rohar@gmail.com \
--cc=pavel@ucw.cz \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.