From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: "Sebastian Reichel" <sre@kernel.org>,
"Pali Rohár" <pali.rohar@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>,
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: linux 4.2-rc1 broken Nokia N900
Date: Tue, 14 Jul 2015 09:18:52 +0900 [thread overview]
Message-ID: <55A4556C.6030007@samsung.com> (raw)
In-Reply-To: <20150713193232.GA15675@earth>
On 14.07.2015 04:32, Sebastian Reichel wrote:
> Hi,
>
> On Mon, Jul 13, 2015 at 06:05:47PM +0200, Pali Rohár wrote:
>> now I'm testing 4.2-rc2 release and rtc is working:
>>
>> [ 27.426055] omap_i2c 48072000.i2c: controller timed out
>> [ 28.723358] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
>> [ 30.127014] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
>> [ 31.373626] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
>>
>> There is still some i2c time out line and some reset detected, but
>> driver loads fine.
>>
>> But problem with touchscreen tsc2005 and wifi wl1251 is still there :-(
>> Drivers are compiled as external .ko modules.
>
> Right, my kernel was with everything built-in.
>
>> Plus I see new problem with bq2415_charger :-(
>
> Mh did you see them in 4.1?
>
>> [ 54.214965] isp1704_charger isp1704: registered with product id isp1707
>> [ 54.828674] bq2415x-charger 2-006b: automode enabled
>> [ 55.192596] ------------[ cut here ]------------
>> [ 55.200561] WARNING: CPU: 0 PID: 528 at kernel/workqueue.c:1443 __queue_delayed_work+0x50/0x144()
>> ...
>> [ 55.489501] WARNING: CPU: 0 PID: 528 at kernel/workqueue.c:1445 __queue_delayed_work+0xb4/0x144()
>> ...
>> [ 55.820953] WARNING: CPU: 0 PID: 528 at kernel/workqueue.c:1376 __queue_work+0x2c0/0x404()
>> ...
>> [ 56.243347] bq2415x-charger 2-006b: driver registered
>
> So the driver tries to send a notification before it's fully
> registered. The warnings are probably a side-effect of the
> power-supply API changes in 4.1.
>
>> [ 77.142181] INFO: rcu_preempt detected stalls on CPUs/tasks: { P528} (detected by 0, t=2102 jiffies, g=1101, c=1100, q=3834)
>> [ 77.163391] kworker/0:3 R running 0 528 2 0x00000000
>> [ 77.173706] Workqueue: events power_supply_changed_work
>> [ 77.183898] [<c042883c>] (__schedule) from [<c0428c94>] (preempt_schedule_irq+0x54/0x84)
>> [ 77.194274] [<c0428c94>] (preempt_schedule_irq) from [<c042c23c>] (svc_preempt+0x8/0x18)
>> [ 77.204711] [<c042c23c>] (svc_preempt) from [<c0047ce4>] (queue_delayed_work_on+0x40/0x44)
>> [ 77.215179] [<c0047ce4>] (queue_delayed_work_on) from [<bf0a59e4>] (bq2415x_notifier_call+0x90/0x9c [bq2415x_charger])
>> [ 77.235870] [<bf0a59e4>] (bq2415x_notifier_call [bq2415x_charger]) from [<c004de34>] (notifier_call_chain+0x38/0x68)
>> [ 77.257019] [<c004de34>] (notifier_call_chain) from [<c004dff4>] (__atomic_notifier_call_chain+0x34/0x44)
>> [ 77.278411] [<c004dff4>] (__atomic_notifier_call_chain) from [<c004e018>] (atomic_notifier_call_chain+0x14/0x18)
>> [ 77.299804] [<c004e018>] (atomic_notifier_call_chain) from [<c0305a9c>] (power_supply_changed_work+0xac/0x130)
>> [ 77.321197] [<c0305a9c>] (power_supply_changed_work) from [<c00484d8>] (process_one_work+0x278/0x45c)
>> [ 77.342529] [<c00484d8>] (process_one_work) from [<c0048918>] (worker_thread+0x230/0x354)
>> [ 77.353393] [<c0048918>] (worker_thread) from [<c004d0e0>] (kthread+0xcc/0xe0)
>> [ 77.364074] [<c004d0e0>] (kthread) from [<c000eb08>] (ret_from_fork+0x14/0x2c)
>> [ 77.374572] kworker/0:3 R running 0 528 2 0x00000000
>> [ 77.384948] Workqueue: events power_supply_changed_work
>> [ 77.395111] [<c042883c>] (__schedule) from [<c0428c94>] (preempt_schedule_irq+0x54/0x84)
>> [ 77.405456] [<c0428c94>] (preempt_schedule_irq) from [<c042c23c>] (svc_preempt+0x8/0x18)
>> [ 77.415863] [<c042c23c>] (svc_preempt) from [<c0047ce4>] (queue_delayed_work_on+0x40/0x44)
>> [ 77.426269] [<c0047ce4>] (queue_delayed_work_on) from [<bf0a59e4>] (bq2415x_notifier_call+0x90/0x9c [bq2415x_charger])
>> [ 77.447174] [<bf0a59e4>] (bq2415x_notifier_call [bq2415x_charger]) from [<c004de34>] (notifier_call_chain+0x38/0x68)
>> [ 77.468322] [<c004de34>] (notifier_call_chain) from [<c004dff4>] (__atomic_notifier_call_chain+0x34/0x44)
>> [ 77.489990] [<c004dff4>] (__atomic_notifier_call_chain) from [<c004e018>] (atomic_notifier_call_chain+0x14/0x18)
>> [ 77.512115] [<c004e018>] (atomic_notifier_call_chain) from [<c0305a9c>] (power_supply_changed_work+0xac/0x130)
>> [ 77.534637] [<c0305a9c>] (power_supply_changed_work) from [<c00484d8>] (process_one_work+0x278/0x45c)
>> [ 77.557189] [<c00484d8>] (process_one_work) from [<c0048918>] (worker_thread+0x230/0x354)
>> [ 77.568634] [<c0048918>] (worker_thread) from [<c004d0e0>] (kthread+0xcc/0xe0)
>> [ 77.579925] [<c004d0e0>] (kthread) from [<c000eb08>] (ret_from_fork+0x14/0x2c)
>
> Not sure about these.
I've got an idea however I cannot test it (I don't have the hardware).
I'll sent it with RFT.
Best regards,
Krzysztof
next prev parent reply other threads:[~2015-07-14 0:18 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-11 12:05 linux 4.2-rc1 broken Nokia N900 Pali Rohár
2015-07-13 6:44 ` Tony Lindgren
2015-07-13 8:09 ` Sebastian Reichel
2015-07-13 17:03 ` Michael Welling
2015-07-13 17:09 ` Pali Rohár
2015-07-13 17:56 ` Michael Welling
2015-07-13 20:28 ` Michael Welling
2015-07-13 20:34 ` Pali Rohár
2015-07-13 21:52 ` Michael Welling
2015-07-13 22:02 ` Pali Rohár
2015-07-13 22:36 ` Michael Welling
2015-07-14 7:14 ` Pali Rohár
2015-07-14 7:45 ` Tony Lindgren
2015-07-14 16:33 ` Michael Welling
2015-07-14 20:01 ` Pavel Machek
2015-07-14 20:17 ` Michael Welling
2015-07-15 19:49 ` Pavel Machek
2015-07-15 20:10 ` Michael Welling
2015-07-21 7:31 ` Pavel Machek
2015-07-21 7:33 ` Pavel Machek
2015-07-21 8:04 ` Pali Rohár
2015-07-20 20:48 ` Michael Welling
2015-07-20 20:46 ` Michael Welling
2015-07-20 20:58 ` Pali Rohár
2015-07-21 9:34 ` Pavel Machek
2015-07-21 21:28 ` Michael Welling
2015-07-22 0:17 ` Michael Welling
2015-07-22 2:03 ` Sebastian Reichel
2015-07-22 5:13 ` Michael Welling
2015-07-22 7:27 ` Pali Rohár
2015-07-22 13:33 ` Sebastian Reichel
2015-07-22 14:27 ` Pali Rohár
2015-07-22 13:30 ` Pavel Machek
2015-07-25 8:55 ` Pali Rohár
2015-07-28 8:39 ` Pali Rohár
2015-07-28 12:26 ` Sebastian Reichel
2015-07-28 12:32 ` Pali Rohár
2015-07-13 11:10 ` Pali Rohár
2015-07-13 13:26 ` Tony Lindgren
2015-07-13 15:51 ` Sebastian Reichel
2015-07-13 16:05 ` Pali Rohár
2015-07-13 19:32 ` Sebastian Reichel
2015-07-14 0:18 ` Krzysztof Kozlowski [this message]
2015-07-24 8:18 ` Dave Young
2015-07-24 8:30 ` Ivaylo Dimitrov
2015-07-24 10:28 ` Dave Young
2015-07-24 10:53 ` Pali Rohár
2015-07-24 8:40 ` Pali Rohár
2015-07-24 10:33 ` Dave Young
2015-07-24 10:52 ` Pali Rohár
2015-07-24 15:50 ` Pali Rohár
2015-07-24 8:51 ` Pavel Machek
2015-07-24 10:39 ` Dave Young
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55A4556C.6030007@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=pavel@ucw.cz \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.