All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@piout.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/3] ARM: at91: add cpu.h
Date: Wed, 22 Jul 2015 16:40:14 +0200	[thread overview]
Message-ID: <20150722143233.GG2853@piout.net> (raw)
In-Reply-To: <1434372182-8967-2-git-send-email-hs@denx.de>

Hi,

On 15/06/2015 at 14:42:59 +0200, Heiko Schocher wrote :
> add cpu.h from linux:
> 
> 7538ec7d1e5: ARM: at91: remove no-MMU at91x40 support
> 
> so it is easier to port linux code, which is based on it.
> 

That file doesn't exist anymore, see
f56d8f7c29320abe6f923fa1b3cb7adcc3252a24 and I think the cpu_is_xxx removal
was finished a few linux versions ago so you should not need that.

> Signed-off-by: Heiko Schocher <hs@denx.de>
> ---
> 
>  arch/arm/mach-at91/include/mach/cpu.h | 149 ++++++++++++++++++++++++++++++++++
>  1 file changed, 149 insertions(+)
>  create mode 100644 arch/arm/mach-at91/include/mach/cpu.h
> 
> diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
> new file mode 100644
> index 0000000..a5e698d
> --- /dev/null
> +++ b/arch/arm/mach-at91/include/mach/cpu.h
> @@ -0,0 +1,149 @@
> +/*
> + * from linux:
> + * 7538ec7d1e5: ARM: at91: remove no-MMU at91x40 support
> + *
> + * arch/arm/mach-at91/include/mach/cpu.h
> + *
> + * Copyright (C) 2006 SAN People
> + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + *
> + */
> +
> +#ifndef __AT91_MACH_CPU_H__
> +#define __AT91_MACH_CPU_H__
> +
> +#ifdef CONFIG_AT91RM9200
> +#define cpu_is_at91rm9200()	(1)
> +#else
> +#define cpu_is_at91rm9200()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9260
> +#define cpu_is_at91sam9260()	(1)
> +#else
> +#define cpu_is_at91sam9260()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G20
> +#define cpu_is_at91sam9g20()	(1)
> +#else
> +#define cpu_is_at91sam9g20()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9XE
> +#define cpu_is_at91sam9xe()	(1)
> +#else
> +#define cpu_is_at91sam9xe()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9261
> +#define cpu_is_at91sam9261()	(1)
> +#else
> +#define cpu_is_at91sam9261()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G10
> +#define cpu_is_at91sam9g10()	(1)
> +#else
> +#define cpu_is_at91sam9g10()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9263
> +#define cpu_is_at91sam9263()	(1)
> +#else
> +#define cpu_is_at91sam9263()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9RL
> +#define cpu_is_at91sam9rl()	(1)
> +#else
> +#define cpu_is_at91sam9rl()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G45
> +#define cpu_is_at91sam9g45()	(1)
> +#else
> +#define cpu_is_at91sam9g45()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G45ES
> +#define cpu_is_at91sam9g45es()	(1)
> +#else
> +#define cpu_is_at91sam9g45es()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9M10
> +#define cpu_is_at91sam9m10()	(1)
> +#else
> +#define cpu_is_at91sam9m10()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G46
> +#define cpu_is_at91sam9g46()	(1)
> +#else
> +#define cpu_is_at91sam9g46()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9M11
> +#define cpu_is_at91sam9m11()	(1)
> +#else
> +#define cpu_is_at91sam9m11()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9X5
> +#define cpu_is_at91sam9x5()	(1)
> +#else
> +#define cpu_is_at91sam9x5()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G15
> +#define cpu_is_at91sam9g15()	(1)
> +#else
> +#define cpu_is_at91sam9g15()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G35
> +#define cpu_is_at91sam9g35()	(1)
> +#else
> +#define cpu_is_at91sam9g35()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9X35
> +#define cpu_is_at91sam9x35()	(1)
> +#else
> +#define cpu_is_at91sam9x35()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G25
> +#define cpu_is_at91sam9g25()	(1)
> +#else
> +#define cpu_is_at91sam9g25()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9X25
> +#define cpu_is_at91sam9x25()	(1)
> +#else
> +#define cpu_is_at91sam9x25()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9N12
> +#define cpu_is_at91sam9n12()	(1)
> +#else
> +#define cpu_is_at91sam9n12()	(0)
> +#endif
> +
> +#ifdef CONFIG_SAMA5D3
> +#define cpu_is_sama5d3()	(1)
> +#else
> +#define cpu_is_sama5d3()	(0)
> +#endif
> +
> +#ifdef CONFIG_SAMA5D4
> +#define cpu_is_sama5d4()	(1)
> +#else
> +#define cpu_is_sama5d4()	(0)
> +#endif
> +
> +#endif
> -- 
> 2.1.0
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 

-- 
Alexandre Belloni

  parent reply	other threads:[~2015-07-22 14:40 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-15 12:42 [U-Boot] [PATCH 0/3] add dfu support for at91 sam9260 based boards Heiko Schocher
2015-06-15 12:42 ` [U-Boot] [PATCH 1/3] ARM: at91: add cpu.h Heiko Schocher
2015-07-21  1:59   ` Marek Vasut
2015-07-22 14:40   ` Alexandre Belloni [this message]
2015-06-15 12:43 ` [U-Boot] [PATCH 2/3] usb: gadget: at91_udc: add support for at91_udc Heiko Schocher
2015-07-21  6:59   ` Lukasz Majewski
2015-08-10  5:16     ` Heiko Schocher
2015-06-15 12:43 ` [U-Boot] [PATCH 3/3] at91, taurus, smartweb: add dfu support Heiko Schocher
2015-07-21  2:02   ` Marek Vasut
2015-07-21  7:02   ` Lukasz Majewski
2015-07-20 14:03 ` [U-Boot] [PATCH 0/3] add dfu support for at91 sam9260 based boards Lukasz Majewski
2015-07-20 15:20   ` Heiko Schocher
2015-07-21  5:36     ` Lukasz Majewski
2015-07-21  2:03   ` Marek Vasut
2015-08-10  5:14     ` Heiko Schocher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150722143233.GG2853@piout.net \
    --to=alexandre.belloni@piout.net \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.