All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <bhelgaas@google.com>
To: David Howells <dhowells@redhat.com>,
	Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: linux-pci@vger.kernel.org, linux-am33-list@redhat.com,
	linux-kernel@vger.kernel.org, linux-sh@vger.kernel.org
Subject: Re: [PATCH] PCI: Remove unused "pci_probe" flags
Date: Wed, 29 Jul 2015 10:56:31 -0500	[thread overview]
Message-ID: <20150729155631.GB31170@google.com> (raw)
In-Reply-To: <20150727221228.24133.16599.stgit@bhelgaas-glaptop2.roam.corp.google.com>

On Mon, Jul 27, 2015 at 05:12:29PM -0500, Bjorn Helgaas wrote:
> The following flags are only used on x86, but they got copied to FR-V,
> MN10300, and SuperH:
> 
>   PCI_PROBE_BIOS
>   PCI_PROBE_CONF1
>   PCI_PROBE_CONF2
>   PCI_ASSIGN_ROMS
>   PCI_NO_CHECKS
>   PCI_BIOS_IRQ_SCAN
>   PCI_ASSIGN_ALL_BUSSES
> 
> FR-V and MN10300 do test for PCI_ASSIGN_ROMS, but they never set it, so
> it's dead code.
> 
> Remove the unused flags above.
> 
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Applied to pci/misc for v4.3.

> ---
>  arch/frv/mb93090-mb00/pci-frv.c         |    8 --------
>  arch/frv/mb93090-mb00/pci-frv.h         |    8 --------
>  arch/mn10300/unit-asb2305/pci-asb2305.c |   22 ++++++++++------------
>  arch/mn10300/unit-asb2305/pci-asb2305.h |    7 -------
>  arch/sh/drivers/pci/pci-sh4.h           |    8 --------
>  5 files changed, 10 insertions(+), 43 deletions(-)
> 
> diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
> index 0635bd6..34bb4b1 100644
> --- a/arch/frv/mb93090-mb00/pci-frv.c
> +++ b/arch/frv/mb93090-mb00/pci-frv.c
> @@ -175,14 +175,6 @@ static void __init pcibios_assign_resources(void)
>  			if (!r->start && r->end)
>  				pci_assign_resource(dev, idx);
>  		}
> -
> -		if (pci_probe & PCI_ASSIGN_ROMS) {
> -			r = &dev->resource[PCI_ROM_RESOURCE];
> -			r->end -= r->start;
> -			r->start = 0;
> -			if (r->end)
> -				pci_assign_resource(dev, PCI_ROM_RESOURCE);
> -		}
>  	}
>  }
>  
> diff --git a/arch/frv/mb93090-mb00/pci-frv.h b/arch/frv/mb93090-mb00/pci-frv.h
> index a7e487fe..d51992f 100644
> --- a/arch/frv/mb93090-mb00/pci-frv.h
> +++ b/arch/frv/mb93090-mb00/pci-frv.h
> @@ -14,14 +14,6 @@
>  #define DBG(x...)
>  #endif
>  
> -#define PCI_PROBE_BIOS		0x0001
> -#define PCI_PROBE_CONF1		0x0002
> -#define PCI_PROBE_CONF2		0x0004
> -#define PCI_NO_CHECKS		0x0400
> -#define PCI_ASSIGN_ROMS		0x1000
> -#define PCI_BIOS_IRQ_SCAN	0x2000
> -#define PCI_ASSIGN_ALL_BUSSES	0x4000
> -
>  extern unsigned int __nongpreldata pci_probe;
>  
>  /* pci-frv.c */
> diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
> index b5b036f..b7ab837 100644
> --- a/arch/mn10300/unit-asb2305/pci-asb2305.c
> +++ b/arch/mn10300/unit-asb2305/pci-asb2305.c
> @@ -183,18 +183,16 @@ static int __init pcibios_assign_resources(void)
>  	struct pci_dev *dev = NULL;
>  	struct resource *r;
>  
> -	if (!(pci_probe & PCI_ASSIGN_ROMS)) {
> -		/* Try to use BIOS settings for ROMs, otherwise let
> -		   pci_assign_unassigned_resources() allocate the new
> -		   addresses. */
> -		for_each_pci_dev(dev) {
> -			r = &dev->resource[PCI_ROM_RESOURCE];
> -			if (!r->flags || !r->start)
> -				continue;
> -			if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) {
> -				r->end -= r->start;
> -				r->start = 0;
> -			}
> +	/* Try to use BIOS settings for ROMs, otherwise let
> +	   pci_assign_unassigned_resources() allocate the new
> +	   addresses. */
> +	for_each_pci_dev(dev) {
> +		r = &dev->resource[PCI_ROM_RESOURCE];
> +		if (!r->flags || !r->start)
> +			continue;
> +		if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) {
> +			r->end -= r->start;
> +			r->start = 0;
>  		}
>  	}
>  
> diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h
> index 9e17aca..96c484b 100644
> --- a/arch/mn10300/unit-asb2305/pci-asb2305.h
> +++ b/arch/mn10300/unit-asb2305/pci-asb2305.h
> @@ -20,13 +20,6 @@
>  #define DBG(x...)
>  #endif
>  
> -#define PCI_PROBE_BIOS 1
> -#define PCI_PROBE_CONF1 2
> -#define PCI_PROBE_CONF2 4
> -#define PCI_NO_CHECKS 0x400
> -#define PCI_ASSIGN_ROMS 0x1000
> -#define PCI_BIOS_IRQ_SCAN 0x2000
> -
>  extern unsigned int pci_probe;
>  
>  /* pci-asb2305.c */
> diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
> index cbf763b..0288efc 100644
> --- a/arch/sh/drivers/pci/pci-sh4.h
> +++ b/arch/sh/drivers/pci/pci-sh4.h
> @@ -11,14 +11,6 @@
>  
>  #include <asm/io.h>
>  
> -/* startup values */
> -#define PCI_PROBE_BIOS		1
> -#define PCI_PROBE_CONF1		2
> -#define PCI_PROBE_CONF2		4
> -#define PCI_NO_CHECKS		0x400
> -#define PCI_ASSIGN_ROMS		0x1000
> -#define PCI_BIOS_IRQ_SCAN	0x2000
> -
>  #define SH4_PCICR		0x100		/* PCI Control Register */
>    #define SH4_PCICR_PREFIX	  0xA5000000	/* CR prefix for write */
>    #define SH4_PCICR_FTO		  0x00000400	/* TRDY/IRDY Enable */
> 

WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Helgaas <bhelgaas@google.com>
To: David Howells <dhowells@redhat.com>,
	Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: linux-pci@vger.kernel.org, linux-am33-list@redhat.com,
	linux-kernel@vger.kernel.org, linux-sh@vger.kernel.org
Subject: Re: [PATCH] PCI: Remove unused "pci_probe" flags
Date: Wed, 29 Jul 2015 15:56:31 +0000	[thread overview]
Message-ID: <20150729155631.GB31170@google.com> (raw)
In-Reply-To: <20150727221228.24133.16599.stgit@bhelgaas-glaptop2.roam.corp.google.com>

On Mon, Jul 27, 2015 at 05:12:29PM -0500, Bjorn Helgaas wrote:
> The following flags are only used on x86, but they got copied to FR-V,
> MN10300, and SuperH:
> 
>   PCI_PROBE_BIOS
>   PCI_PROBE_CONF1
>   PCI_PROBE_CONF2
>   PCI_ASSIGN_ROMS
>   PCI_NO_CHECKS
>   PCI_BIOS_IRQ_SCAN
>   PCI_ASSIGN_ALL_BUSSES
> 
> FR-V and MN10300 do test for PCI_ASSIGN_ROMS, but they never set it, so
> it's dead code.
> 
> Remove the unused flags above.
> 
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Applied to pci/misc for v4.3.

> ---
>  arch/frv/mb93090-mb00/pci-frv.c         |    8 --------
>  arch/frv/mb93090-mb00/pci-frv.h         |    8 --------
>  arch/mn10300/unit-asb2305/pci-asb2305.c |   22 ++++++++++------------
>  arch/mn10300/unit-asb2305/pci-asb2305.h |    7 -------
>  arch/sh/drivers/pci/pci-sh4.h           |    8 --------
>  5 files changed, 10 insertions(+), 43 deletions(-)
> 
> diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
> index 0635bd6..34bb4b1 100644
> --- a/arch/frv/mb93090-mb00/pci-frv.c
> +++ b/arch/frv/mb93090-mb00/pci-frv.c
> @@ -175,14 +175,6 @@ static void __init pcibios_assign_resources(void)
>  			if (!r->start && r->end)
>  				pci_assign_resource(dev, idx);
>  		}
> -
> -		if (pci_probe & PCI_ASSIGN_ROMS) {
> -			r = &dev->resource[PCI_ROM_RESOURCE];
> -			r->end -= r->start;
> -			r->start = 0;
> -			if (r->end)
> -				pci_assign_resource(dev, PCI_ROM_RESOURCE);
> -		}
>  	}
>  }
>  
> diff --git a/arch/frv/mb93090-mb00/pci-frv.h b/arch/frv/mb93090-mb00/pci-frv.h
> index a7e487fe..d51992f 100644
> --- a/arch/frv/mb93090-mb00/pci-frv.h
> +++ b/arch/frv/mb93090-mb00/pci-frv.h
> @@ -14,14 +14,6 @@
>  #define DBG(x...)
>  #endif
>  
> -#define PCI_PROBE_BIOS		0x0001
> -#define PCI_PROBE_CONF1		0x0002
> -#define PCI_PROBE_CONF2		0x0004
> -#define PCI_NO_CHECKS		0x0400
> -#define PCI_ASSIGN_ROMS		0x1000
> -#define PCI_BIOS_IRQ_SCAN	0x2000
> -#define PCI_ASSIGN_ALL_BUSSES	0x4000
> -
>  extern unsigned int __nongpreldata pci_probe;
>  
>  /* pci-frv.c */
> diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
> index b5b036f..b7ab837 100644
> --- a/arch/mn10300/unit-asb2305/pci-asb2305.c
> +++ b/arch/mn10300/unit-asb2305/pci-asb2305.c
> @@ -183,18 +183,16 @@ static int __init pcibios_assign_resources(void)
>  	struct pci_dev *dev = NULL;
>  	struct resource *r;
>  
> -	if (!(pci_probe & PCI_ASSIGN_ROMS)) {
> -		/* Try to use BIOS settings for ROMs, otherwise let
> -		   pci_assign_unassigned_resources() allocate the new
> -		   addresses. */
> -		for_each_pci_dev(dev) {
> -			r = &dev->resource[PCI_ROM_RESOURCE];
> -			if (!r->flags || !r->start)
> -				continue;
> -			if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) {
> -				r->end -= r->start;
> -				r->start = 0;
> -			}
> +	/* Try to use BIOS settings for ROMs, otherwise let
> +	   pci_assign_unassigned_resources() allocate the new
> +	   addresses. */
> +	for_each_pci_dev(dev) {
> +		r = &dev->resource[PCI_ROM_RESOURCE];
> +		if (!r->flags || !r->start)
> +			continue;
> +		if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) {
> +			r->end -= r->start;
> +			r->start = 0;
>  		}
>  	}
>  
> diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h
> index 9e17aca..96c484b 100644
> --- a/arch/mn10300/unit-asb2305/pci-asb2305.h
> +++ b/arch/mn10300/unit-asb2305/pci-asb2305.h
> @@ -20,13 +20,6 @@
>  #define DBG(x...)
>  #endif
>  
> -#define PCI_PROBE_BIOS 1
> -#define PCI_PROBE_CONF1 2
> -#define PCI_PROBE_CONF2 4
> -#define PCI_NO_CHECKS 0x400
> -#define PCI_ASSIGN_ROMS 0x1000
> -#define PCI_BIOS_IRQ_SCAN 0x2000
> -
>  extern unsigned int pci_probe;
>  
>  /* pci-asb2305.c */
> diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
> index cbf763b..0288efc 100644
> --- a/arch/sh/drivers/pci/pci-sh4.h
> +++ b/arch/sh/drivers/pci/pci-sh4.h
> @@ -11,14 +11,6 @@
>  
>  #include <asm/io.h>
>  
> -/* startup values */
> -#define PCI_PROBE_BIOS		1
> -#define PCI_PROBE_CONF1		2
> -#define PCI_PROBE_CONF2		4
> -#define PCI_NO_CHECKS		0x400
> -#define PCI_ASSIGN_ROMS		0x1000
> -#define PCI_BIOS_IRQ_SCAN	0x2000
> -
>  #define SH4_PCICR		0x100		/* PCI Control Register */
>    #define SH4_PCICR_PREFIX	  0xA5000000	/* CR prefix for write */
>    #define SH4_PCICR_FTO		  0x00000400	/* TRDY/IRDY Enable */
> 

  reply	other threads:[~2015-07-29 15:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-27 22:12 [PATCH] PCI: Remove unused "pci_probe" flags Bjorn Helgaas
2015-07-27 22:12 ` Bjorn Helgaas
2015-07-29 15:56 ` Bjorn Helgaas [this message]
2015-07-29 15:56   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150729155631.GB31170@google.com \
    --to=bhelgaas@google.com \
    --cc=dhowells@redhat.com \
    --cc=linux-am33-list@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=yasutake.koichi@jp.panasonic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.