From: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
To: Sifan Naeem <sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
Cc: James Hogan <james.hogan-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Stable kernel (v3.19+)"
<stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH 0/8] i2c: img-scb: fixes to support i2c on pistachio
Date: Fri, 31 Jul 2015 13:12:52 +0200 [thread overview]
Message-ID: <20150731111252.GL1522@katana> (raw)
In-Reply-To: <1437997641-32575-1-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1948 bytes --]
On Mon, Jul 27, 2015 at 12:47:13PM +0100, Sifan Naeem wrote:
> Following patches are required to fix the existing driver to
> support i2c on pistachio.
>
> Tested on Pistachio bub using an Adafruit I2C Non-Volatile FRAM Breakout
> (256Kbit / 32KByte) eeprom.
>
> Used i2c buildroot tools to test the eeprom and the other i2c blocks.
> Also used dd commands to copy data to and then to dump data from the
> eeprom. i2ctransfer was used to test repeated starts and verified
> using a scope.
That sounds like good testing \o/ If you are happy with i2ctransfer,
then please consider adding Tested-by tags to the i2ctransfer patches,
so Jean gets a more cosy feeling to include them to i2ctools.
>
> Cc: Stable kernel (v3.19+) <stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
I am happy for indications like "please consider adding this line for
stable: ...", but not CC stable yourself. These patches need changes,
so they are noise for the stable lists. The ones I ultimately apply are
the proper ones.
That being said, I'll mark all your patches "changes reqeuested" since you
need to resend based on current review from James (thanks a lot!). Even
if some patches are good and got acked, but it is easier for me to mark
them all the same :)
>
> Sifan Naeem (8):
> i2c: img-scb: enable fencing for all versions of the ip
> i2c: img-scb: do dummy writes before fifo access
> i2c: img-scb: use DIV_ROUND_UP to round divisor values
> i2c: img-scb: fix LOW and HIGH period values for the SCL clock
> i2c: img-scb: reset interrupts in img_i2c_soft_reset
> i2c: img-scb: remove start bit detected status after handling
> i2c: img-scb: improve transaction complete handle
> i2c: img-scb: verify support for requested bit rate
>
> drivers/i2c/busses/i2c-img-scb.c | 101 ++++++++++++++++++++++----------------
> 1 file changed, 58 insertions(+), 43 deletions(-)
>
> --
> 1.7.9.5
>
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Wolfram Sang <wsa@the-dreams.de>
To: Sifan Naeem <sifan.naeem@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>,
linux-i2c@vger.kernel.org,
"Stable kernel (v3.19+)" <stable@vger.kernel.org>
Subject: Re: [PATCH 0/8] i2c: img-scb: fixes to support i2c on pistachio
Date: Fri, 31 Jul 2015 13:12:52 +0200 [thread overview]
Message-ID: <20150731111252.GL1522@katana> (raw)
In-Reply-To: <1437997641-32575-1-git-send-email-sifan.naeem@imgtec.com>
[-- Attachment #1: Type: text/plain, Size: 1924 bytes --]
On Mon, Jul 27, 2015 at 12:47:13PM +0100, Sifan Naeem wrote:
> Following patches are required to fix the existing driver to
> support i2c on pistachio.
>
> Tested on Pistachio bub using an Adafruit I2C Non-Volatile FRAM Breakout
> (256Kbit / 32KByte) eeprom.
>
> Used i2c buildroot tools to test the eeprom and the other i2c blocks.
> Also used dd commands to copy data to and then to dump data from the
> eeprom. i2ctransfer was used to test repeated starts and verified
> using a scope.
That sounds like good testing \o/ If you are happy with i2ctransfer,
then please consider adding Tested-by tags to the i2ctransfer patches,
so Jean gets a more cosy feeling to include them to i2ctools.
>
> Cc: Stable kernel (v3.19+) <stable@vger.kernel.org>
I am happy for indications like "please consider adding this line for
stable: ...", but not CC stable yourself. These patches need changes,
so they are noise for the stable lists. The ones I ultimately apply are
the proper ones.
That being said, I'll mark all your patches "changes reqeuested" since you
need to resend based on current review from James (thanks a lot!). Even
if some patches are good and got acked, but it is easier for me to mark
them all the same :)
>
> Sifan Naeem (8):
> i2c: img-scb: enable fencing for all versions of the ip
> i2c: img-scb: do dummy writes before fifo access
> i2c: img-scb: use DIV_ROUND_UP to round divisor values
> i2c: img-scb: fix LOW and HIGH period values for the SCL clock
> i2c: img-scb: reset interrupts in img_i2c_soft_reset
> i2c: img-scb: remove start bit detected status after handling
> i2c: img-scb: improve transaction complete handle
> i2c: img-scb: verify support for requested bit rate
>
> drivers/i2c/busses/i2c-img-scb.c | 101 ++++++++++++++++++++++----------------
> 1 file changed, 58 insertions(+), 43 deletions(-)
>
> --
> 1.7.9.5
>
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2015-07-31 11:12 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-27 11:47 [PATCH 0/8] i2c: img-scb: fixes to support i2c on pistachio Sifan Naeem
2015-07-27 11:47 ` Sifan Naeem
2015-07-27 11:47 ` [PATCH 2/8] i2c: img-scb: do dummy writes before fifo access Sifan Naeem
2015-07-27 11:47 ` Sifan Naeem
2015-07-27 11:47 ` [PATCH 5/8] i2c: img-scb: reset interrupts in img_i2c_soft_reset Sifan Naeem
2015-07-27 11:47 ` Sifan Naeem
[not found] ` <1437997641-32575-6-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-28 11:35 ` James Hogan
2015-07-28 11:35 ` James Hogan
2015-07-28 11:46 ` Sifan Naeem
2015-07-28 11:51 ` James Hogan
2015-07-27 11:47 ` [PATCH 6/8] i2c: img-scb: remove start bit detected status after handling Sifan Naeem
2015-07-27 11:47 ` Sifan Naeem
2015-07-28 13:53 ` James Hogan
2015-07-28 13:53 ` James Hogan
2015-07-29 12:49 ` Sifan Naeem
2015-07-27 11:47 ` [PATCH 7/8] i2c: img-scb: improve transaction complete handle Sifan Naeem
2015-07-27 11:47 ` Sifan Naeem
[not found] ` <1437997641-32575-8-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-29 12:22 ` James Hogan
2015-07-29 12:22 ` James Hogan
[not found] ` <55B8C56A.7050102-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-29 13:35 ` Sifan Naeem
2015-07-29 13:35 ` Sifan Naeem
2015-07-27 11:47 ` [PATCH 8/8] i2c: img-scb: verify support for requested bit rate Sifan Naeem
2015-07-27 11:47 ` Sifan Naeem
2015-07-29 12:02 ` James Hogan
2015-07-29 12:02 ` James Hogan
2015-07-29 13:34 ` Sifan Naeem
[not found] ` <1437997641-32575-1-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-27 11:47 ` [PATCH 1/8] i2c: img-scb: enable fencing for all versions of the ip Sifan Naeem
2015-07-27 11:47 ` Sifan Naeem
2015-07-27 20:20 ` James Hogan
2015-07-27 20:20 ` James Hogan
2015-07-28 9:26 ` Sifan Naeem
2015-07-28 9:38 ` James Hogan
2015-07-27 11:47 ` [PATCH 3/8] i2c: img-scb: use DIV_ROUND_UP to round divisor values Sifan Naeem
2015-07-27 11:47 ` Sifan Naeem
[not found] ` <1437997641-32575-4-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-28 10:45 ` James Hogan
2015-07-28 10:45 ` James Hogan
2015-07-27 11:47 ` [PATCH 4/8] i2c: img-scb: fix LOW and HIGH period values for the SCL clock Sifan Naeem
2015-07-27 11:47 ` Sifan Naeem
2015-07-28 11:27 ` James Hogan
2015-07-28 11:27 ` James Hogan
2015-07-31 11:12 ` Wolfram Sang [this message]
2015-07-31 11:12 ` [PATCH 0/8] i2c: img-scb: fixes to support i2c on pistachio Wolfram Sang
2015-09-07 13:41 ` Ezequiel Garcia
[not found] ` <CAAEAJfCW9cEMDZwta5Q6VVEZfzxTDZ50Fx=YeW6bPMnrtKNcbw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-09-07 13:50 ` Wolfram Sang
2015-09-07 14:22 ` Ezequiel Garcia
[not found] ` <CAAEAJfBj+qdv58gzOnqMrmN0486Enzbn3G1L0KhMctMkEkXfTw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-09-07 21:13 ` i2ctransfer (Was: [PATCH 0/8] i2c: img-scb: fixes to support i2c on pistachio) Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150731111252.GL1522@katana \
--to=wsa-z923lk4zbo2bacvfa/9k2g@public.gmane.org \
--cc=james.hogan-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org \
--cc=stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.