* [PATCH v2] ARM: dts: vf-colibri: define stdout-path property
@ 2015-07-15 14:50 ` Stefan Agner
0 siblings, 0 replies; 8+ messages in thread
From: Stefan Agner @ 2015-07-15 14:50 UTC (permalink / raw)
To: linux-arm-kernel
Define Vybrid's UART0, connected to the Colibri pinout UART_A, as
standard output.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index 77e1a45..2ce6fe5 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -9,7 +9,7 @@
/ {
chosen {
- bootargs = "console=ttyLP0,115200";
+ stdout-path = "serial0:115200n8";
};
clk16m: clk16m {
--
2.4.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v2] ARM: dts: vf-colibri: define stdout-path property
@ 2015-07-15 14:50 ` Stefan Agner
0 siblings, 0 replies; 8+ messages in thread
From: Stefan Agner @ 2015-07-15 14:50 UTC (permalink / raw)
To: shawn.guo, kernel
Cc: devicetree, linux-arm-kernel, linux-kernel, Stefan Agner
Define Vybrid's UART0, connected to the Colibri pinout UART_A, as
standard output.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index 77e1a45..2ce6fe5 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -9,7 +9,7 @@
/ {
chosen {
- bootargs = "console=ttyLP0,115200";
+ stdout-path = "serial0:115200n8";
};
clk16m: clk16m {
--
2.4.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v2] ARM: dts: vf-colibri: define stdout-path property
2015-07-15 14:50 ` Stefan Agner
(?)
@ 2015-07-30 16:43 ` Stefan Agner
-1 siblings, 0 replies; 8+ messages in thread
From: Stefan Agner @ 2015-07-30 16:43 UTC (permalink / raw)
To: linux-arm-kernel
Hi Shawn,
Did you notice this change? Just asking since you applied some other
changes already...
--
Stefan
On 2015-07-15 16:50, Stefan Agner wrote:
> Define Vybrid's UART0, connected to the Colibri pinout UART_A, as
> standard output.
>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> index 77e1a45..2ce6fe5 100644
> --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> @@ -9,7 +9,7 @@
>
> / {
> chosen {
> - bootargs = "console=ttyLP0,115200";
> + stdout-path = "serial0:115200n8";
> };
>
> clk16m: clk16m {
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH v2] ARM: dts: vf-colibri: define stdout-path property
@ 2015-07-30 16:43 ` Stefan Agner
0 siblings, 0 replies; 8+ messages in thread
From: Stefan Agner @ 2015-07-30 16:43 UTC (permalink / raw)
To: shawn.guo; +Cc: devicetree, linux-arm-kernel, linux-kernel
Hi Shawn,
Did you notice this change? Just asking since you applied some other
changes already...
--
Stefan
On 2015-07-15 16:50, Stefan Agner wrote:
> Define Vybrid's UART0, connected to the Colibri pinout UART_A, as
> standard output.
>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> index 77e1a45..2ce6fe5 100644
> --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> @@ -9,7 +9,7 @@
>
> / {
> chosen {
> - bootargs = "console=ttyLP0,115200";
> + stdout-path = "serial0:115200n8";
> };
>
> clk16m: clk16m {
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH v2] ARM: dts: vf-colibri: define stdout-path property
@ 2015-07-30 16:43 ` Stefan Agner
0 siblings, 0 replies; 8+ messages in thread
From: Stefan Agner @ 2015-07-30 16:43 UTC (permalink / raw)
To: shawn.guo; +Cc: devicetree, linux-kernel, linux-arm-kernel
Hi Shawn,
Did you notice this change? Just asking since you applied some other
changes already...
--
Stefan
On 2015-07-15 16:50, Stefan Agner wrote:
> Define Vybrid's UART0, connected to the Colibri pinout UART_A, as
> standard output.
>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> index 77e1a45..2ce6fe5 100644
> --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> @@ -9,7 +9,7 @@
>
> / {
> chosen {
> - bootargs = "console=ttyLP0,115200";
> + stdout-path = "serial0:115200n8";
> };
>
> clk16m: clk16m {
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v2] ARM: dts: vf-colibri: define stdout-path property
@ 2015-08-05 11:59 ` Shawn Guo
0 siblings, 0 replies; 8+ messages in thread
From: Shawn Guo @ 2015-08-05 11:59 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jul 30, 2015 at 06:43:29PM +0200, Stefan Agner wrote:
> Hi Shawn,
>
> Did you notice this change? Just asking since you applied some other
> changes already...
Just applied. Sorry for the delay.
Shawn
>
> --
> Stefan
>
> On 2015-07-15 16:50, Stefan Agner wrote:
> > Define Vybrid's UART0, connected to the Colibri pinout UART_A, as
> > standard output.
> >
> > Signed-off-by: Stefan Agner <stefan@agner.ch>
> > ---
> > arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> > b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> > index 77e1a45..2ce6fe5 100644
> > --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> > +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> > @@ -9,7 +9,7 @@
> >
> > / {
> > chosen {
> > - bootargs = "console=ttyLP0,115200";
> > + stdout-path = "serial0:115200n8";
> > };
> >
> > clk16m: clk16m {
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH v2] ARM: dts: vf-colibri: define stdout-path property
@ 2015-08-05 11:59 ` Shawn Guo
0 siblings, 0 replies; 8+ messages in thread
From: Shawn Guo @ 2015-08-05 11:59 UTC (permalink / raw)
To: Stefan Agner; +Cc: shawn.guo, devicetree, linux-kernel, linux-arm-kernel
On Thu, Jul 30, 2015 at 06:43:29PM +0200, Stefan Agner wrote:
> Hi Shawn,
>
> Did you notice this change? Just asking since you applied some other
> changes already...
Just applied. Sorry for the delay.
Shawn
>
> --
> Stefan
>
> On 2015-07-15 16:50, Stefan Agner wrote:
> > Define Vybrid's UART0, connected to the Colibri pinout UART_A, as
> > standard output.
> >
> > Signed-off-by: Stefan Agner <stefan@agner.ch>
> > ---
> > arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> > b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> > index 77e1a45..2ce6fe5 100644
> > --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> > +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> > @@ -9,7 +9,7 @@
> >
> > / {
> > chosen {
> > - bootargs = "console=ttyLP0,115200";
> > + stdout-path = "serial0:115200n8";
> > };
> >
> > clk16m: clk16m {
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH v2] ARM: dts: vf-colibri: define stdout-path property
@ 2015-08-05 11:59 ` Shawn Guo
0 siblings, 0 replies; 8+ messages in thread
From: Shawn Guo @ 2015-08-05 11:59 UTC (permalink / raw)
To: Stefan Agner
Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Thu, Jul 30, 2015 at 06:43:29PM +0200, Stefan Agner wrote:
> Hi Shawn,
>
> Did you notice this change? Just asking since you applied some other
> changes already...
Just applied. Sorry for the delay.
Shawn
>
> --
> Stefan
>
> On 2015-07-15 16:50, Stefan Agner wrote:
> > Define Vybrid's UART0, connected to the Colibri pinout UART_A, as
> > standard output.
> >
> > Signed-off-by: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
> > ---
> > arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> > b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> > index 77e1a45..2ce6fe5 100644
> > --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> > +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
> > @@ -9,7 +9,7 @@
> >
> > / {
> > chosen {
> > - bootargs = "console=ttyLP0,115200";
> > + stdout-path = "serial0:115200n8";
> > };
> >
> > clk16m: clk16m {
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2015-08-05 12:00 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-07-15 14:50 [PATCH v2] ARM: dts: vf-colibri: define stdout-path property Stefan Agner
2015-07-15 14:50 ` Stefan Agner
2015-07-30 16:43 ` Stefan Agner
2015-07-30 16:43 ` Stefan Agner
2015-07-30 16:43 ` Stefan Agner
2015-08-05 11:59 ` Shawn Guo
2015-08-05 11:59 ` Shawn Guo
2015-08-05 11:59 ` Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.