All of lore.kernel.org
 help / color / mirror / Atom feed
From: Varadarajan Narayanan <varada@codeaurora.org>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Russell King <linux@arm.linux.org.uk>,
	Andy Gross <agross@codeaurora.org>,
	David Brown <davidb@codeaurora.org>,
	Varadarajan Narayanan <varada@codeaurora.org>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Lina Iyer <lina.iyer@linaro.org>,
	Georgi Djakov <gdjakov@mm-sol.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org
Subject: [PATCH v3] qcom: ipq40xx: Add basic board/dts support for IPQ40XX SoC
Date: Mon, 24 Aug 2015 14:58:13 +0530	[thread overview]
Message-ID: <20150824092813.GA15581@codeaurora.org> (raw)

Add initial dts files and SoC support for IPQ40XX

Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
Changes in v2:
  - Added devicetree bindings documentation

Changes in v3:
  - Split 'gcnt' into a separate patch
  - Added the new entries to Makefiles, Kconfig & board.c in sorted order
  - Used "qcom,ipq40xx" instead of "qcom,ipq40xx-r3pc" in board.c

 Documentation/devicetree/bindings/qcom.txt | 16 ++++++
 arch/arm/boot/dts/Makefile                 |  1 +
 arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts    | 33 ++++++++++++
 arch/arm/boot/dts/qcom-ipq40xx.dtsi        | 81 ++++++++++++++++++++++++++++++
 arch/arm/configs/ipq_defconfig             |  1 +
 arch/arm/mach-qcom/Kconfig                 |  4 ++
 arch/arm/mach-qcom/board.c                 |  1 +
 7 files changed, 137 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/qcom.txt
 create mode 100644 arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts
 create mode 100644 arch/arm/boot/dts/qcom-ipq40xx.dtsi

diff --git a/Documentation/devicetree/bindings/qcom.txt b/Documentation/devicetree/bindings/qcom.txt
new file mode 100644
index 0000000..7d56bd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/qcom.txt
@@ -0,0 +1,16 @@
+Qualcomm IPQ device tree bindings
+---------------------------------
+
+System on Chip
+
+Device tree must specify which SoC it uses, with one of the
+following compatible strings
+
+       "qcom,ipq40xx"
+
+Platform
+
+Device tree must specify which Platform it uses, with one of the
+following compatible strings
+
+       "qcom,ipq40xx-r3pc"
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 246473a..d20d49c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -474,6 +474,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
 	qcom-apq8084-mtp.dtb \
+	qcom-ipq40xx-r3pc.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
diff --git a/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts
new file mode 100644
index 0000000..7e4e629
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts
@@ -0,0 +1,33 @@
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "qcom-ipq40xx.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ40XX R3PC";
+	compatible = "qcom,ipq40xx-r3pc", "qcom,ipq40xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512MB */
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram rw init=/init console=ttyMSM0,115200n8 initrd=0x82000000,0x000E2246";
+	};
+
+	soc {
+		serial@78b0000 {
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq40xx.dtsi b/arch/arm/boot/dts/qcom-ipq40xx.dtsi
new file mode 100644
index 0000000..f572f38
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq40xx.dtsi
@@ -0,0 +1,81 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ40XX";
+	compatible = "qcom,ipq40xx";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>,
+			<0x0b002000 0x1000>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <1 2 0xf08>,
+				     <1 3 0xf08>,
+				     <1 4 0xf08>,
+				     <1 1 0xf08>;
+			clock-frequency = <20833333>;
+		};
+
+		serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78b0000 0x200>;
+			interrupts = <0 108 0>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/configs/ipq_defconfig b/arch/arm/configs/ipq_defconfig
index 1cabd8b..89bf8ad 100644
--- a/arch/arm/configs/ipq_defconfig
+++ b/arch/arm/configs/ipq_defconfig
@@ -21,6 +21,7 @@ CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_MSM8X60=y
 CONFIG_ARCH_MSM8960=y
 CONFIG_ARCH_MSM8974=y
+CONFIG_ARCH_IPQ40XX=y
 CONFIG_ARCH_IPQ8064=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index fab49a2..70812aa 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -22,6 +22,10 @@ config ARCH_MSM8974
 	bool "Enable support for MSM8974"
 	select HAVE_ARM_ARCH_TIMER
 
+config ARCH_IPQ40XX
+	bool "Enable support for IPQ40XX"
+	select HAVE_ARM_ARCH_TIMER
+
 config ARCH_IPQ8064
 	bool "Enable support for IPQ806x"
 	select CLKSRC_QCOM
diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
index 6d8bbf7..af9e247 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
@@ -18,6 +18,7 @@ static const char * const qcom_dt_match[] __initconst = {
 	"qcom,apq8064",
 	"qcom,apq8074-dragonboard",
 	"qcom,apq8084",
+	"qcom,ipq40xx",
 	"qcom,ipq8062",
 	"qcom,ipq8064",
 	"qcom,msm8660-surf",
-- 
1.8.2.1

WARNING: multiple messages have this Message-ID (diff)
From: varada@codeaurora.org (Varadarajan Narayanan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] qcom: ipq40xx: Add basic board/dts support for IPQ40XX SoC
Date: Mon, 24 Aug 2015 14:58:13 +0530	[thread overview]
Message-ID: <20150824092813.GA15581@codeaurora.org> (raw)

Add initial dts files and SoC support for IPQ40XX

Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
Changes in v2:
  - Added devicetree bindings documentation

Changes in v3:
  - Split 'gcnt' into a separate patch
  - Added the new entries to Makefiles, Kconfig & board.c in sorted order
  - Used "qcom,ipq40xx" instead of "qcom,ipq40xx-r3pc" in board.c

 Documentation/devicetree/bindings/qcom.txt | 16 ++++++
 arch/arm/boot/dts/Makefile                 |  1 +
 arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts    | 33 ++++++++++++
 arch/arm/boot/dts/qcom-ipq40xx.dtsi        | 81 ++++++++++++++++++++++++++++++
 arch/arm/configs/ipq_defconfig             |  1 +
 arch/arm/mach-qcom/Kconfig                 |  4 ++
 arch/arm/mach-qcom/board.c                 |  1 +
 7 files changed, 137 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/qcom.txt
 create mode 100644 arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts
 create mode 100644 arch/arm/boot/dts/qcom-ipq40xx.dtsi

diff --git a/Documentation/devicetree/bindings/qcom.txt b/Documentation/devicetree/bindings/qcom.txt
new file mode 100644
index 0000000..7d56bd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/qcom.txt
@@ -0,0 +1,16 @@
+Qualcomm IPQ device tree bindings
+---------------------------------
+
+System on Chip
+
+Device tree must specify which SoC it uses, with one of the
+following compatible strings
+
+       "qcom,ipq40xx"
+
+Platform
+
+Device tree must specify which Platform it uses, with one of the
+following compatible strings
+
+       "qcom,ipq40xx-r3pc"
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 246473a..d20d49c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -474,6 +474,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
 	qcom-apq8084-mtp.dtb \
+	qcom-ipq40xx-r3pc.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
diff --git a/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts
new file mode 100644
index 0000000..7e4e629
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts
@@ -0,0 +1,33 @@
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "qcom-ipq40xx.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ40XX R3PC";
+	compatible = "qcom,ipq40xx-r3pc", "qcom,ipq40xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512MB */
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram rw init=/init console=ttyMSM0,115200n8 initrd=0x82000000,0x000E2246";
+	};
+
+	soc {
+		serial at 78b0000 {
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq40xx.dtsi b/arch/arm/boot/dts/qcom-ipq40xx.dtsi
new file mode 100644
index 0000000..f572f38
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq40xx.dtsi
@@ -0,0 +1,81 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ40XX";
+	compatible = "qcom,ipq40xx";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+
+		cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+
+		cpu at 2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+
+		cpu at 3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller at b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>,
+			<0x0b002000 0x1000>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <1 2 0xf08>,
+				     <1 3 0xf08>,
+				     <1 4 0xf08>,
+				     <1 1 0xf08>;
+			clock-frequency = <20833333>;
+		};
+
+		serial at 78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78b0000 0x200>;
+			interrupts = <0 108 0>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/configs/ipq_defconfig b/arch/arm/configs/ipq_defconfig
index 1cabd8b..89bf8ad 100644
--- a/arch/arm/configs/ipq_defconfig
+++ b/arch/arm/configs/ipq_defconfig
@@ -21,6 +21,7 @@ CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_MSM8X60=y
 CONFIG_ARCH_MSM8960=y
 CONFIG_ARCH_MSM8974=y
+CONFIG_ARCH_IPQ40XX=y
 CONFIG_ARCH_IPQ8064=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index fab49a2..70812aa 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -22,6 +22,10 @@ config ARCH_MSM8974
 	bool "Enable support for MSM8974"
 	select HAVE_ARM_ARCH_TIMER
 
+config ARCH_IPQ40XX
+	bool "Enable support for IPQ40XX"
+	select HAVE_ARM_ARCH_TIMER
+
 config ARCH_IPQ8064
 	bool "Enable support for IPQ806x"
 	select CLKSRC_QCOM
diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
index 6d8bbf7..af9e247 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
@@ -18,6 +18,7 @@ static const char * const qcom_dt_match[] __initconst = {
 	"qcom,apq8064",
 	"qcom,apq8074-dragonboard",
 	"qcom,apq8084",
+	"qcom,ipq40xx",
 	"qcom,ipq8062",
 	"qcom,ipq8064",
 	"qcom,msm8660-surf",
-- 
1.8.2.1

             reply	other threads:[~2015-08-24  9:28 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-24  9:28 Varadarajan Narayanan [this message]
2015-08-24  9:28 ` [PATCH v3] qcom: ipq40xx: Add basic board/dts support for IPQ40XX SoC Varadarajan Narayanan
2015-08-24 22:49 ` Stephen Boyd
2015-08-24 22:49   ` Stephen Boyd
2015-08-25  8:10   ` Varadarajan Narayanan
2015-08-25  8:10     ` Varadarajan Narayanan
2015-08-25 21:14     ` Stephen Boyd
2015-08-25 21:14       ` Stephen Boyd
2015-08-26  5:39       ` Varadarajan Narayanan
2015-08-26  5:39         ` Varadarajan Narayanan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150824092813.GA15581@codeaurora.org \
    --to=varada@codeaurora.org \
    --cc=agross@codeaurora.org \
    --cc=davidb@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=gdjakov@mm-sol.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=lina.iyer@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.