[PATCH-v6 1/6] mfd: 88pm800: remove duplicate dev_err calls during probe

[lee.jones@linaro.org (Lee Jones)]

On Wed, 08 Jul 2015, Vaibhav Hiremath wrote:

> During probe, inside fn device_800_init(), submodule init is
> happening and the same error message is getting printed in both
> the places, <subdev>_init() and inside device_800_init().
> 
> So this patch gets rid of dev_err from <subdev>_init() fns.
> 
> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
> ---
>  drivers/mfd/88pm800.c | 32 ++++----------------------------
>  1 file changed, 4 insertions(+), 28 deletions(-)

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
> index 841717a..0c5470e 100644
> --- a/drivers/mfd/88pm800.c
> +++ b/drivers/mfd/88pm800.c
> @@ -308,59 +308,35 @@ static int device_gpadc_init(struct pm80x_chip *chip,
>  	return 0;
>  
>  out:
> -	dev_info(chip->dev, "pm800 device_gpadc_init: Failed!\n");
>  	return ret;
>  }
>  
>  static int device_onkey_init(struct pm80x_chip *chip,
>  				struct pm80x_platform_data *pdata)
>  {
> -	int ret;
> -
> -	ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
> +	return mfd_add_devices(chip->dev, 0, &onkey_devs[0],
>  			      ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0,
>  			      NULL);
> -	if (ret) {
> -		dev_err(chip->dev, "Failed to add onkey subdev\n");
> -		return ret;
> -	}
> -
> -	return 0;
>  }
>  
>  static int device_rtc_init(struct pm80x_chip *chip,
>  				struct pm80x_platform_data *pdata)
>  {
> -	int ret;
> -
>  	if (pdata) {
>  		rtc_devs[0].platform_data = pdata->rtc;
>  		rtc_devs[0].pdata_size =
>  				pdata->rtc ? sizeof(struct pm80x_rtc_pdata) : 0;
>  	}
> -	ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
> -			      ARRAY_SIZE(rtc_devs), NULL, 0, NULL);
> -	if (ret) {
> -		dev_err(chip->dev, "Failed to add rtc subdev\n");
> -		return ret;
> -	}
>  
> -	return 0;
> +	return mfd_add_devices(chip->dev, 0, &rtc_devs[0],
> +			      ARRAY_SIZE(rtc_devs), NULL, 0, NULL);
>  }
>  
>  static int device_regulator_init(struct pm80x_chip *chip,
>  					   struct pm80x_platform_data *pdata)
>  {
> -	int ret;
> -
> -	ret = mfd_add_devices(chip->dev, 0, &regulator_devs[0],
> +	return mfd_add_devices(chip->dev, 0, &regulator_devs[0],
>  			      ARRAY_SIZE(regulator_devs), NULL, 0, NULL);
> -	if (ret) {
> -		dev_err(chip->dev, "Failed to add regulator subdev\n");
> -		return ret;
> -	}
> -
> -	return 0;
>  }
>  
>  static int device_irq_init_800(struct pm80x_chip *chip)

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog