From: Peter Chen <peter.chen@freescale.com>
To: Nathan Sullivan <nathan.sullivan@ni.com>
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
gregkh@linuxfoundation.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: [PATCH 1/2] usb: chipidea: add xilinx zynq platform data
Date: Mon, 31 Aug 2015 10:36:06 +0800 [thread overview]
Message-ID: <20150831023605.GD25516@shlinux2> (raw)
In-Reply-To: <1440602865-30468-1-git-send-email-nathan.sullivan@ni.com>
On Wed, Aug 26, 2015 at 10:27:44AM -0500, Nathan Sullivan wrote:
> The Xilinx Zynq udc does not need the CI_HDRC_DISABLE_STREAMING flag,
> unlike the default platform data. Add platform data specific to the
> Zynq udc.
>
You may add the possible reason, eg, tx buffer is not enough.
Others are ok.
> Based on a patch by the same name from the Xilinx vendor tree.
>
> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
> ---
> drivers/usb/chipidea/ci_hdrc_usb2.c | 25 +++++++++++++++++++------
> 1 file changed, 19 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
> index 9eae1a1..4456d2c 100644
> --- a/drivers/usb/chipidea/ci_hdrc_usb2.c
> +++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
> @@ -12,6 +12,7 @@
> #include <linux/dma-mapping.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/of_platform.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/usb/chipidea.h>
> @@ -30,18 +31,36 @@ static const struct ci_hdrc_platform_data ci_default_pdata = {
> .flags = CI_HDRC_DISABLE_STREAMING,
> };
>
> +static struct ci_hdrc_platform_data ci_zynq_pdata = {
> + .capoffset = DEF_CAPOFFSET,
> +};
> +
> +static const struct of_device_id ci_hdrc_usb2_of_match[] = {
> + { .compatible = "chipidea,usb2"},
> + { .compatible = "xlnx,zynq-usb-2.20a", .data = &ci_zynq_pdata},
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
> +
> static int ci_hdrc_usb2_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct ci_hdrc_usb2_priv *priv;
> struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev);
> int ret;
> + const struct of_device_id *match;
>
> if (!ci_pdata) {
> ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL);
> *ci_pdata = ci_default_pdata; /* struct copy */
> }
>
> + match = of_match_device(ci_hdrc_usb2_of_match, &pdev->dev);
> + if (match && match->data) {
> + /* struct copy */
> + *ci_pdata = *(struct ci_hdrc_platform_data *)match->data;
> + }
> +
> priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
> @@ -96,12 +115,6 @@ static int ci_hdrc_usb2_remove(struct platform_device *pdev)
> return 0;
> }
>
> -static const struct of_device_id ci_hdrc_usb2_of_match[] = {
> - { .compatible = "chipidea,usb2" },
> - { }
> -};
> -MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
> -
> static struct platform_driver ci_hdrc_usb2_driver = {
> .probe = ci_hdrc_usb2_probe,
> .remove = ci_hdrc_usb2_remove,
> --
> 1.7.10.4
>
--
Best Regards,
Peter Chen
WARNING: multiple messages have this Message-ID (diff)
From: Peter Chen <peter.chen@freescale.com>
To: Nathan Sullivan <nathan.sullivan@ni.com>
Cc: <robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <gregkh@linuxfoundation.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-usb@vger.kernel.org>
Subject: Re: [PATCH 1/2] usb: chipidea: add xilinx zynq platform data
Date: Mon, 31 Aug 2015 10:36:06 +0800 [thread overview]
Message-ID: <20150831023605.GD25516@shlinux2> (raw)
In-Reply-To: <1440602865-30468-1-git-send-email-nathan.sullivan@ni.com>
On Wed, Aug 26, 2015 at 10:27:44AM -0500, Nathan Sullivan wrote:
> The Xilinx Zynq udc does not need the CI_HDRC_DISABLE_STREAMING flag,
> unlike the default platform data. Add platform data specific to the
> Zynq udc.
>
You may add the possible reason, eg, tx buffer is not enough.
Others are ok.
> Based on a patch by the same name from the Xilinx vendor tree.
>
> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
> ---
> drivers/usb/chipidea/ci_hdrc_usb2.c | 25 +++++++++++++++++++------
> 1 file changed, 19 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
> index 9eae1a1..4456d2c 100644
> --- a/drivers/usb/chipidea/ci_hdrc_usb2.c
> +++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
> @@ -12,6 +12,7 @@
> #include <linux/dma-mapping.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/of_platform.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/usb/chipidea.h>
> @@ -30,18 +31,36 @@ static const struct ci_hdrc_platform_data ci_default_pdata = {
> .flags = CI_HDRC_DISABLE_STREAMING,
> };
>
> +static struct ci_hdrc_platform_data ci_zynq_pdata = {
> + .capoffset = DEF_CAPOFFSET,
> +};
> +
> +static const struct of_device_id ci_hdrc_usb2_of_match[] = {
> + { .compatible = "chipidea,usb2"},
> + { .compatible = "xlnx,zynq-usb-2.20a", .data = &ci_zynq_pdata},
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
> +
> static int ci_hdrc_usb2_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct ci_hdrc_usb2_priv *priv;
> struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev);
> int ret;
> + const struct of_device_id *match;
>
> if (!ci_pdata) {
> ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL);
> *ci_pdata = ci_default_pdata; /* struct copy */
> }
>
> + match = of_match_device(ci_hdrc_usb2_of_match, &pdev->dev);
> + if (match && match->data) {
> + /* struct copy */
> + *ci_pdata = *(struct ci_hdrc_platform_data *)match->data;
> + }
> +
> priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
> @@ -96,12 +115,6 @@ static int ci_hdrc_usb2_remove(struct platform_device *pdev)
> return 0;
> }
>
> -static const struct of_device_id ci_hdrc_usb2_of_match[] = {
> - { .compatible = "chipidea,usb2" },
> - { }
> -};
> -MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
> -
> static struct platform_driver ci_hdrc_usb2_driver = {
> .probe = ci_hdrc_usb2_probe,
> .remove = ci_hdrc_usb2_remove,
> --
> 1.7.10.4
>
--
Best Regards,
Peter Chen
next prev parent reply other threads:[~2015-08-31 2:36 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-26 15:27 [PATCH 1/2] usb: chipidea: add xilinx zynq platform data Nathan Sullivan
2015-08-26 15:27 ` [PATCH 2/2] Documentation: bindings: add doc for zynq USB Nathan Sullivan
[not found] ` <1440602865-30468-1-git-send-email-nathan.sullivan-acOepvfBmUk@public.gmane.org>
2015-08-27 5:29 ` [PATCH 1/2] usb: chipidea: add xilinx zynq platform data sundeep subbaraya
2015-08-27 5:29 ` sundeep subbaraya
[not found] ` <CALHRZuqFtaRFNd9D=a+x2rZ2848ZOGYbTkSWCHxNPcW_NvocxA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-27 4:33 ` Peter Chen
2015-08-27 4:33 ` Peter Chen
2015-08-27 7:41 ` punnaiah choudary kalluri
[not found] ` <CAGnW=BYMnOFTaMQJtLXZ9ckCEHs+gCOCQR0VQFfO4HP=SMHBDQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-27 14:33 ` Nathan Sullivan
2015-08-27 14:33 ` Nathan Sullivan
2015-08-28 1:30 ` Peter Chen
2015-08-28 1:30 ` Peter Chen
2015-08-28 14:42 ` Nathan Sullivan
2015-08-28 14:42 ` Nathan Sullivan
2015-08-31 0:40 ` Peter Chen
2015-08-31 0:40 ` Peter Chen
2015-08-31 3:31 ` punnaiah choudary kalluri
2015-08-31 3:31 ` punnaiah choudary kalluri
2015-08-31 2:28 ` Peter Chen
2015-09-01 6:51 ` Subbaraya Sundeep Bhatta
2015-09-23 6:58 ` Subbaraya Sundeep Bhatta
2015-09-23 6:58 ` Subbaraya Sundeep Bhatta
2015-09-23 7:01 ` Subbaraya Sundeep Bhatta
2015-08-31 2:36 ` Peter Chen [this message]
2015-08-31 2:36 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150831023605.GD25516@shlinux2 \
--to=peter.chen@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gregkh@linuxfoundation.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nathan.sullivan@ni.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.