* [PATCH 1/3] ARM: dts: imx7d: Add PWM support
@ 2015-09-02 18:16 Fabio Estevam
2015-09-02 18:16 ` [PATCH 2/3] ARM: dts: imx7d: Add USB support Fabio Estevam
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Fabio Estevam @ 2015-09-02 18:16 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
Add the PWM1-4 nodes.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/boot/dts/imx7d.dtsi | 52 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b738ce0..15c2193 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -570,6 +570,58 @@
};
};
+ aips2: aips-bus at 30400000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30400000 0x400000>;
+ ranges;
+
+ pwm1: pwm at 30660000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30660000 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
+ <&clks IMX7D_PWM1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm at 30670000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30670000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
+ <&clks IMX7D_PWM2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm at 30680000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30680000 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
+ <&clks IMX7D_PWM3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm at 30690000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30690000 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
+ <&clks IMX7D_PWM4_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+ };
+
aips3: aips-bus at 30800000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 2/3] ARM: dts: imx7d: Add USB support
2015-09-02 18:16 [PATCH 1/3] ARM: dts: imx7d: Add PWM support Fabio Estevam
@ 2015-09-02 18:16 ` Fabio Estevam
2015-09-06 12:22 ` Shawn Guo
2015-09-02 18:16 ` [PATCH 3/3] ARM: dts: imx7d-sdb: " Fabio Estevam
2015-09-06 12:21 ` [PATCH 1/3] ARM: dts: imx7d: Add PWM support Shawn Guo
2 siblings, 1 reply; 5+ messages in thread
From: Fabio Estevam @ 2015-09-02 18:16 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/boot/dts/imx7d.dtsi | 71 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 15c2193..90eb9f4 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -746,6 +746,77 @@
status = "disabled";
};
+ usbotg1: usb at 30b10000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b10000 0x200>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphy_nop1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
+
+ usbotg2: usb at 30b20000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b20000 0x200>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphy_nop2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
+
+ usbh: usb at 30b30000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b30000 0x200>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphy_nop3>;
+ fsl,usbmisc = <&usbmisc3 0>;
+ phy_type = "hsic";
+ dr_mode = "host";
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
+
+ usbmisc1: usbmisc at 30b10200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b10200 0x200>;
+ };
+
+ usbmisc2: usbmisc at 30b20200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b20200 0x200>;
+ };
+
+ usbmisc3: usbmisc at 30b30200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b30200 0x200>;
+ };
+
+ usbphy_nop1: usbphy_nop1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY1_CLK>;
+ clock-names = "main_clk";
+ };
+
+ usbphy_nop2: usbphy_nop2 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY2_CLK>;
+ clock-names = "main_clk";
+ };
+
+ usbphy_nop3: usbphy_nop3 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+ clock-names = "main_clk";
+ };
+
usdhc1: usdhc at 30b40000 {
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
reg = <0x30b40000 0x10000>;
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 2/3] ARM: dts: imx7d: Add USB support
2015-09-02 18:16 ` [PATCH 2/3] ARM: dts: imx7d: Add USB support Fabio Estevam
@ 2015-09-06 12:22 ` Shawn Guo
0 siblings, 0 replies; 5+ messages in thread
From: Shawn Guo @ 2015-09-06 12:22 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Sep 02, 2015 at 03:16:21PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> arch/arm/boot/dts/imx7d.dtsi | 71 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 71 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index 15c2193..90eb9f4 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -746,6 +746,77 @@
> status = "disabled";
> };
>
> + usbotg1: usb at 30b10000 {
> + compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
> + reg = <0x30b10000 0x200>;
> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX7D_USB_CTRL_CLK>;
> + fsl,usbphy = <&usbphy_nop1>;
> + fsl,usbmisc = <&usbmisc1 0>;
> + phy-clkgate-delay-us = <400>;
> + status = "disabled";
> + };
> +
> + usbotg2: usb at 30b20000 {
> + compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
> + reg = <0x30b20000 0x200>;
> + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX7D_USB_CTRL_CLK>;
> + fsl,usbphy = <&usbphy_nop2>;
> + fsl,usbmisc = <&usbmisc2 0>;
> + phy-clkgate-delay-us = <400>;
> + status = "disabled";
> + };
> +
> + usbh: usb at 30b30000 {
> + compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
> + reg = <0x30b30000 0x200>;
> + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX7D_USB_CTRL_CLK>;
> + fsl,usbphy = <&usbphy_nop3>;
> + fsl,usbmisc = <&usbmisc3 0>;
> + phy_type = "hsic";
> + dr_mode = "host";
> + phy-clkgate-delay-us = <400>;
> + status = "disabled";
> + };
> +
> + usbmisc1: usbmisc at 30b10200 {
> + #index-cells = <1>;
> + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
> + reg = <0x30b10200 0x200>;
> + };
> +
> + usbmisc2: usbmisc at 30b20200 {
> + #index-cells = <1>;
> + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
> + reg = <0x30b20200 0x200>;
> + };
> +
> + usbmisc3: usbmisc at 30b30200 {
> + #index-cells = <1>;
> + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
> + reg = <0x30b30200 0x200>;
> + };
> +
> + usbphy_nop1: usbphy_nop1 {
Hyphen rather than underscore should be used in node name.
When you resend, please copy kernel at pengutronix.de and Peter Chen.
Shawn
> + compatible = "usb-nop-xceiv";
> + clocks = <&clks IMX7D_USB_PHY1_CLK>;
> + clock-names = "main_clk";
> + };
> +
> + usbphy_nop2: usbphy_nop2 {
> + compatible = "usb-nop-xceiv";
> + clocks = <&clks IMX7D_USB_PHY2_CLK>;
> + clock-names = "main_clk";
> + };
> +
> + usbphy_nop3: usbphy_nop3 {
> + compatible = "usb-nop-xceiv";
> + clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
> + clock-names = "main_clk";
> + };
> +
> usdhc1: usdhc at 30b40000 {
> compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
> reg = <0x30b40000 0x10000>;
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 3/3] ARM: dts: imx7d-sdb: Add USB support
2015-09-02 18:16 [PATCH 1/3] ARM: dts: imx7d: Add PWM support Fabio Estevam
2015-09-02 18:16 ` [PATCH 2/3] ARM: dts: imx7d: Add USB support Fabio Estevam
@ 2015-09-02 18:16 ` Fabio Estevam
2015-09-06 12:21 ` [PATCH 1/3] ARM: dts: imx7d: Add PWM support Shawn Guo
2 siblings, 0 replies; 5+ messages in thread
From: Fabio Estevam @ 2015-09-02 18:16 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
Add support for USBOTG1 and USBOTG2.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/boot/dts/imx7d-sdb.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index fdd1d7c..3c6cf52 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -231,6 +231,17 @@
status = "okay";
};
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 1/3] ARM: dts: imx7d: Add PWM support
2015-09-02 18:16 [PATCH 1/3] ARM: dts: imx7d: Add PWM support Fabio Estevam
2015-09-02 18:16 ` [PATCH 2/3] ARM: dts: imx7d: Add USB support Fabio Estevam
2015-09-02 18:16 ` [PATCH 3/3] ARM: dts: imx7d-sdb: " Fabio Estevam
@ 2015-09-06 12:21 ` Shawn Guo
2 siblings, 0 replies; 5+ messages in thread
From: Shawn Guo @ 2015-09-06 12:21 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Sep 02, 2015 at 03:16:20PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> Add the PWM1-4 nodes.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-09-06 12:22 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-09-02 18:16 [PATCH 1/3] ARM: dts: imx7d: Add PWM support Fabio Estevam
2015-09-02 18:16 ` [PATCH 2/3] ARM: dts: imx7d: Add USB support Fabio Estevam
2015-09-06 12:22 ` Shawn Guo
2015-09-02 18:16 ` [PATCH 3/3] ARM: dts: imx7d-sdb: " Fabio Estevam
2015-09-06 12:21 ` [PATCH 1/3] ARM: dts: imx7d: Add PWM support Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.