Re: [PATCH] mfd: arizona: Call the runtime PM function if the state is runtime resumed

[Charles Keepax <ckeepax@opensource.wolfsonmicro.com>]

On Thu, Sep 17, 2015 at 06:05:30PM +0900, Inha Song wrote:
> Hi,
> 
> 
> It is a log:
> 
> # aplay
> [   79.590767] s3c64xx_spi_runtime_resume
> [   79.592288] arizona spi1.0: ASRC underclocked
> [   79.592331] s3c64xx_spi_runtime_suspend
> ---
> -> suspend ()
> 
> [   83.348754] s3c64xx_spi_runtime_resume
> [   83.367711] s3c64xx_spi_suspend
> [   83.368420] PM: suspend of devices complete after 59.666 msecs
> [   83.375584] arizona spi1.0: Failed to read IRQ status: -108
> [   83.375595] arizona spi1.0: Failed to read main IRQ status: -108
> [   83.375672] arizona spi1.0: Failed to read IRQ status: -108
> [   83.375679] arizona spi1.0: Failed to read main IRQ status: -108
> [   83.375749] arizona spi1.0: Failed to read IRQ status: -108
> .....
> [   83.580360] Call trace:
> [   83.580369] [<ffffffc000089f8c>] dump_backtrace+0x0/0x12c
> [   83.580373] [<ffffffc00008a0c8>] show_stack+0x10/0x1c
> [   83.580380] [<ffffffc0009f10e4>] dump_stack+0x78/0xc8
> [   83.580386] [<ffffffc00009ade8>] warn_slowpath_common+0x98/0xd0
> [   83.580390] [<ffffffc00009ae6c>] warn_slowpath_fmt+0x4c/0x58
> [   83.580394] [<ffffffc0000e7f1c>] __enable_irq+0x40/0x8c
> [   83.580399] [<ffffffc0000e7f9c>] enable_irq+0x34/0x74
> [   83.580404] [<ffffffc0004d00d0>] arizona_resume+0x10/0x20
> [   83.580410] [<ffffffc0004b6bac>] dpm_run_callback+0x50/0x1a0
> [   83.580414] [<ffffffc0004b728c>] device_resume+0x90/0x268
> [   83.580418] [<ffffffc0004b88cc>] dpm_resume+0x120/0x350
> [   83.580422] [<ffffffc0004b8f1c>] dpm_resume_end+0x10/0x28
> [   83.580426] [<ffffffc0000e1bec>] suspend_devices_and_enter+0x138/0x7f4
> [   83.580430] [<ffffffc0000e25bc>] pm_suspend+0x314/0x5bc
> [   83.580435] [<ffffffc0000e0bc8>] state_store+0x7c/0xf0
> [   83.580441] [<ffffffc00035ee58>] kobj_attr_store+0x10/0x24
> [   83.580448] [<ffffffc00020e1e0>] sysfs_kf_write+0x40/0x4c
> [   83.580452] [<ffffffc00020d664>] kernfs_fop_write+0xb8/0x180
> [   83.580458] [<ffffffc0001a2ef4>] __vfs_write+0x2c/0x11c
> [   83.580463] [<ffffffc0001a38f0>] vfs_write+0x90/0x170
> [   83.580467] [<ffffffc0001a422c>] SyS_write+0x40/0xa0

OK so this is definitely that the SPI driver hasn't resumed
yet. Could we also get DEBUG turned on in arizona-core here. I am
interested to check where in the process the arizona
suspend/resume ops are being called.

Thanks,
Charles