From: Shawn Guo <shawnguo@kernel.org>
To: Markus Pargmann <mpa@pengutronix.de>
Cc: Adrian Alonso <aalonso@freescale.com>,
linux-arm-kernel@lists.infradead.org, shawn.guo@linaro.org,
linus.walleij@linaro.org, lznuaa@gmail.com,
devicetree@vger.kernel.org, Frank.Li@freescale.com,
nitin.garg@freescale.com, Anson.Huang@freescale.com,
linux-gpio@vger.kernel.org, robh+dt@kernel.org,
kernel@pengutronix.de, yibin.gong@freescale.com
Subject: Re: [PATCH v5 3/7] ARM: dts: imx: imx7d-sbd add iomuxc-lpsr hoggrp-2 pads
Date: Fri, 25 Sep 2015 10:17:58 -0700 [thread overview]
Message-ID: <20150925171758.GW3529@tiger> (raw)
In-Reply-To: <20150925104922.GK11805@pengutronix.de>
On Fri, Sep 25, 2015 at 12:49:22PM +0200, Markus Pargmann wrote:
> On Thu, Sep 24, 2015 at 03:53:59PM -0500, Adrian Alonso wrote:
> > Add imx7d-sdb iomuxc-lpsr hoggrp-2 default pads settings
> >
> > Signed-off-by: Adrian Alonso <aalonso@freescale.com>
> > ---
> > Changes for V2: Resend
> > Changes for V3: Resend
> > Changes for V4: Resend
> > Changes for V5: Resend
> >
> > arch/arm/boot/dts/imx7d-sdb.dts | 15 +++++++++++++++
> > 1 file changed, 15 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
> > index 8059458..c8a178c 100644
> > --- a/arch/arm/boot/dts/imx7d-sdb.dts
> > +++ b/arch/arm/boot/dts/imx7d-sdb.dts
> > @@ -419,3 +419,18 @@
> >
> > };
> > };
> > +
> > +&iomuxc_lpsr {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_hog_2>;
> > +
> > + imx7d-sdb {
> > + pinctrl_hog_2: hoggrp-2 {
> > + fsl,pins = <
> > + MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14
> > + MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x59
> > + MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74
>
> In my opinion this should still be in the pincontrol for the watchdog
> instead of hogging. Also it is not obvious what the GPIOs are for.
+1
Shawn
WARNING: multiple messages have this Message-ID (diff)
From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 3/7] ARM: dts: imx: imx7d-sbd add iomuxc-lpsr hoggrp-2 pads
Date: Fri, 25 Sep 2015 10:17:58 -0700 [thread overview]
Message-ID: <20150925171758.GW3529@tiger> (raw)
In-Reply-To: <20150925104922.GK11805@pengutronix.de>
On Fri, Sep 25, 2015 at 12:49:22PM +0200, Markus Pargmann wrote:
> On Thu, Sep 24, 2015 at 03:53:59PM -0500, Adrian Alonso wrote:
> > Add imx7d-sdb iomuxc-lpsr hoggrp-2 default pads settings
> >
> > Signed-off-by: Adrian Alonso <aalonso@freescale.com>
> > ---
> > Changes for V2: Resend
> > Changes for V3: Resend
> > Changes for V4: Resend
> > Changes for V5: Resend
> >
> > arch/arm/boot/dts/imx7d-sdb.dts | 15 +++++++++++++++
> > 1 file changed, 15 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
> > index 8059458..c8a178c 100644
> > --- a/arch/arm/boot/dts/imx7d-sdb.dts
> > +++ b/arch/arm/boot/dts/imx7d-sdb.dts
> > @@ -419,3 +419,18 @@
> >
> > };
> > };
> > +
> > +&iomuxc_lpsr {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_hog_2>;
> > +
> > + imx7d-sdb {
> > + pinctrl_hog_2: hoggrp-2 {
> > + fsl,pins = <
> > + MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14
> > + MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x59
> > + MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74
>
> In my opinion this should still be in the pincontrol for the watchdog
> instead of hogging. Also it is not obvious what the GPIOs are for.
+1
Shawn
next prev parent reply other threads:[~2015-09-25 17:18 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-24 20:53 [PATCH v5 1/7] pinctrl: freescale: imx: fix system crash if enable two pinctl instances Adrian Alonso
2015-09-24 20:53 ` Adrian Alonso
2015-09-24 20:53 ` [PATCH v5 2/7] ARM: dts: imx: imx7d add iomuxc lpsr device node Adrian Alonso
2015-09-24 20:53 ` Adrian Alonso
2015-09-24 20:53 ` [PATCH v5 3/7] ARM: dts: imx: imx7d-sbd add iomuxc-lpsr hoggrp-2 pads Adrian Alonso
2015-09-24 20:53 ` Adrian Alonso
2015-09-25 10:49 ` Markus Pargmann
2015-09-25 10:49 ` Markus Pargmann
2015-09-25 17:17 ` Shawn Guo [this message]
2015-09-25 17:17 ` Shawn Guo
2015-09-24 20:54 ` [PATCH v5 4/7] pinctrl: freescale: imx: allow mux_reg offset zero Adrian Alonso
2015-09-24 20:54 ` Adrian Alonso
2015-09-25 10:47 ` Markus Pargmann
2015-09-25 10:47 ` Markus Pargmann
2015-09-25 19:07 ` Shawn Guo
2015-09-25 19:07 ` Shawn Guo
2015-09-25 19:16 ` Alonso Adrian
2015-09-25 19:16 ` Alonso Adrian
2015-09-25 20:59 ` Shawn Guo
2015-09-25 20:59 ` Shawn Guo
2015-09-24 20:54 ` [PATCH v5 5/7] pinctrl: freescale: imx: add shared input select reg support Adrian Alonso
2015-09-24 20:54 ` Adrian Alonso
2015-09-24 20:54 ` [PATCH v5 6/7] pinctrl: freescale: imx7d: support iomux lpsr controller Adrian Alonso
2015-09-24 20:54 ` Adrian Alonso
2015-09-24 20:54 ` [PATCH v5 7/7] pinctrl: freescale: imx: imx7d iomuxc-lpsr devicetree bindings Adrian Alonso
2015-09-24 20:54 ` Adrian Alonso
2015-09-25 16:50 ` [PATCH v5 1/7] pinctrl: freescale: imx: fix system crash if enable two pinctl instances Linus Walleij
2015-09-25 16:50 ` Linus Walleij
[not found] ` <1443128043-21063-1-git-send-email-aalonso-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-09-25 19:09 ` Shawn Guo
2015-09-25 19:09 ` Shawn Guo
2015-10-02 12:19 ` Linus Walleij
2015-10-02 12:19 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150925171758.GW3529@tiger \
--to=shawnguo@kernel.org \
--cc=Anson.Huang@freescale.com \
--cc=Frank.Li@freescale.com \
--cc=aalonso@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=lznuaa@gmail.com \
--cc=mpa@pengutronix.de \
--cc=nitin.garg@freescale.com \
--cc=robh+dt@kernel.org \
--cc=shawn.guo@linaro.org \
--cc=yibin.gong@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.