From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH i-g-t] tests: Adding kms_dp_aux_dev test.
Date: Tue, 29 Sep 2015 19:01:18 +0300 [thread overview]
Message-ID: <20150929160118.GA26517@intel.com> (raw)
In-Reply-To: <87si5xirvl.fsf@intel.com>
On Tue, Sep 29, 2015 at 10:53:02AM +0300, Jani Nikula wrote:
> On Tue, 29 Sep 2015, Rafael Antognolli <rafael.antognolli@intel.com> wrote:
> > This new test makes some basic testing on the proposed drm_dp_aux_dev
> > interface. If the feature is enabled and the drm_dp_aux_dev class is
> > present, it will check for available DP aux channels and test them for:
> > - basic seek to 0 and read 1 byte
> > - seek to the last address and read, to confirm 0 is returned
> > - seek one more byte and confirm that EINVAL is returned
> > - try to read 64 bytes when at 8 bytes from the end of the
> > address space
> > - try to read 64 bytes at the address 0.
> >
> > So far, no write checks are done.
>
> Side note, it would be useful to have a tool under tools/ to
> read/write/dump DPCD registers.
dd could be used thanks to the use of standard syscalls, but something
a bit easier might be interesting too.
What I'd like to have is a DPCD decoder, so we could just grab
the entire thing and make it human readable.
>
> On the one hand, I think it would be trivial to bolt this into the
> intel_reg tool. One could add a dpcd "port" (kind of like namespace) and
> all of it would work very nicely. Everything is there already.
>
> On the other hand, this perhaps should be a standalone tool, as it's
> driver agnostic stuff. But it would mean quite a bit of code
> duplication, and we might end up with the mess we had before intel_reg -
> lots of tools for various things with slightly different feature sets,
> yet all of them doing roughly the same thing.
>
> BR,
> Jani.
>
>
> >
> > Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
> > ---
> > tests/.gitignore | 1 +
> > tests/Makefile.sources | 1 +
> > tests/kms_dp_aux_dev.c | 134 +++++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 136 insertions(+)
> > create mode 100644 tests/kms_dp_aux_dev.c
> >
> > diff --git a/tests/.gitignore b/tests/.gitignore
> > index dc8bb53..efdad75 100644
> > --- a/tests/.gitignore
> > +++ b/tests/.gitignore
> > @@ -127,6 +127,7 @@ kms_3d
> > kms_addfb_basic
> > kms_crtc_background_color
> > kms_cursor_crc
> > +kms_dp_aux_dev
> > kms_draw_crc
> > kms_fbc_crc
> > kms_fbcon_fbt
> > diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> > index 2e2e088..dc07737 100644
> > --- a/tests/Makefile.sources
> > +++ b/tests/Makefile.sources
> > @@ -64,6 +64,7 @@ TESTS_progs_M = \
> > gem_write_read_ring_switch \
> > kms_addfb_basic \
> > kms_cursor_crc \
> > + kms_dp_aux_dev \
> > kms_draw_crc \
> > kms_fbc_crc \
> > kms_fbcon_fbt \
> > diff --git a/tests/kms_dp_aux_dev.c b/tests/kms_dp_aux_dev.c
> > new file mode 100644
> > index 0000000..aab8c95
> > --- /dev/null
> > +++ b/tests/kms_dp_aux_dev.c
> > @@ -0,0 +1,134 @@
> > +/*
> > + * Copyright © 2015 Intel Corporation
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a
> > + * copy of this software and associated documentation files (the "Software"),
> > + * to deal in the Software without restriction, including without limitation
> > + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> > + * and/or sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice (including the next
> > + * paragraph) shall be included in all copies or substantial portions of the
> > + * Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> > + * IN THE SOFTWARE.
> > + */
> > +
> > +/** @file kms_dp_aux_dev.c
> > + *
> > + * This is a test of functionality of drm_dp_aux_dev.
> > + */
> > +
> > +#include "igt.h"
> > +#include <stdlib.h>
> > +#include <stdio.h>
> > +#include <dirent.h>
> > +#include <unistd.h>
> > +#include <sys/stat.h>
> > +#include <fcntl.h>
> > +
> > +#include <drm.h>
> > +
> > +#define DRM_DP_AUX_SYSFS_PATH "/sys/class/drm_dp_aux_dev"
> > +
> > +IGT_TEST_DESCRIPTION("Test of drm_aux_dev nodes.");
> > +
> > +static void drm_dp_aux_test(const char *devname)
> > +{
> > + char basedir[] = "/dev/";
> > + char name[256 + sizeof(basedir)];
> > + off_t address;
> > + uint8_t buf;
> > + uint8_t bigbuf[64];
> > + int fd;
> > +
> > + ssize_t res;
> > +
> > + snprintf(name, sizeof(name), "%s%s", basedir, devname);
> > + igt_info("Running test on %s\n", name);
> > +
> > + /* Check if this DP aux channel is connected before continuing tests */
> > + fd = open(name, O_RDONLY);
> > + igt_assert_lte(0, fd);
> > + address = lseek(fd, 0x0, SEEK_SET);
> > + igt_assert_eq(address, 0x0);
> > + res = read(fd, &buf, sizeof(buf));
> > + igt_skip_on(res < 0 && errno == ETIMEDOUT);
> > +
> > +
> > + /* Channel is connected, start tests */
> > + igt_assert_eq(res, sizeof(buf));
> > +
> > + /* Test reads on the end of address space */
> > + address = lseek(fd, 0, SEEK_END);
> > + igt_assert_eq(address, 1 << 20);
> > + res = read(fd, &buf, sizeof(buf));
> > + igt_assert_eq(res, 0);
> > +
> > + address = lseek(fd, 1, SEEK_CUR);
> > + igt_assert_eq(address, -1);
> > + igt_assert_eq(errno, EINVAL);
> > +
> > + address = lseek(fd, -8, SEEK_END);
> > + res = read(fd, bigbuf, sizeof(bigbuf));
> > + igt_assert_eq(res, 8);
> > +
> > + /* Test reading more than 16 bytes at once */
> > + address = lseek(fd, 0, SEEK_SET);
> > + res = read(fd, bigbuf, sizeof(bigbuf));
> > + igt_assert_eq(res, sizeof(bigbuf));
> > +}
> > +
> > +static void for_each_dp_aux(DIR *dir)
> > +{
> > + int count = 0;
> > + struct dirent *dirent;
> > +
> > + if (!dir)
> > + return;
> > +
> > + rewinddir(dir);
> > + while ((dirent = readdir(dir))) {
> > + if (dirent->d_name[0] == '.')
> > + continue;
> > +
> > + count++;
> > + igt_subtest(dirent->d_name)
> > + drm_dp_aux_test(dirent->d_name);
> > + }
> > +
> > + closedir(dir);
> > +}
> > +
> > +igt_main
> > +{
> > + struct stat st;
> > + DIR *dir = NULL;
> > +
> > + igt_fixture {
> > + int count = 0;
> > + struct dirent *dirent;
> > +
> > + igt_require(stat(DRM_DP_AUX_SYSFS_PATH, &st) == 0);
> > + igt_require(S_ISDIR(st.st_mode));
> > +
> > + dir = opendir(DRM_DP_AUX_SYSFS_PATH);
> > + igt_require(dir);
> > +
> > + while ((dirent = readdir(dir))) {
> > + if (dirent->d_name[0] != '.')
> > + count++;
> > + }
> > +
> > + igt_require(count > 0);
> > + }
> > +
> > + for_each_dp_aux(dir);
> > +}
> > --
> > 2.4.3
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
> --
> Jani Nikula, Intel Open Source Technology Center
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-09-29 16:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-28 23:54 [PATCH i-g-t] tests: Adding kms_dp_aux_dev test Rafael Antognolli
2015-09-29 7:47 ` Daniel Vetter
2015-09-29 7:53 ` Jani Nikula
2015-09-29 16:01 ` Ville Syrjälä [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-02-19 21:24 Rafael Antognolli
2016-02-19 22:13 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150929160118.GA26517@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.