Re: [PATCH v7 1/7] ARM: dts: imx: imx7d-sbd remove fixed can2-3v3 regulator

[Shawn Guo <shawnguo@kernel.org>]

On Mon, Sep 28, 2015 at 04:56:35PM -0500, Adrian Alonso wrote:
> Remove incorrect can2-3v3 fixed regulator, imx7d-sdb doesn't
> have a dedicated can2 fixed regulator instead it shares PERI_3V3
> fixed regulator (RT8070ZS) which is enabled by default (hardwired)
> from pmic pfuze3000 NVCC_3V3 power rail.

@Frank, can you please confirm it? 

> 
> Signed-off-by: Adrian Alonso <aalonso@freescale.com>

Please stop sending patch to shawn.guo@linaro.org, and
shawnguo@kernel.org is good enough.

> ---
> Changes for V7: New patch in series

I do not understand why the patch has to be included in this series. 

Shawn

> 
>  arch/arm/boot/dts/imx7d-sdb.dts | 11 +----------
>  1 file changed, 1 insertion(+), 10 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
> index 8059458..83f0053 100644
> --- a/arch/arm/boot/dts/imx7d-sdb.dts
> +++ b/arch/arm/boot/dts/imx7d-sdb.dts
> @@ -78,16 +78,7 @@
>  			enable-active-high;
>  		};
>  
> -		reg_can2_3v3: regulator@2 {
> -			compatible = "regulator-fixed";
> -			reg = <2>;
> -			regulator-name = "can2-3v3";
> -			regulator-min-microvolt = <3300000>;
> -			regulator-max-microvolt = <3300000>;
> -			gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
> -		};
> -
> -		reg_vref_1v8: regulator@3 {
> +		reg_vref_1v8: regulator@2 {
>  			compatible = "regulator-fixed";
>  			reg = <3>;
>  			regulator-name = "vref-1v8";
> -- 
> 2.1.4
>