please strip MIME-Version and Content-T{ype,ransfer-Encoding} in git am --scissors

["Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>]

Hello,

when applying the mail below (without the '> ' prefix) using git am
--scissors the result looks like:

	$ git show
	commit 26ef0606927cc1979faa4166d7f9f3584b5cdc61
	Author: Tony Lindgren <tony@atomide.com>
	Date:   Tue Oct 6 05:36:17 2015 -0700

	    memory: omap-gpmc: Fix unselectable debug option for GPMC
	    
	    MIME-Version: 1.0
	    Content-Type: text/plain; charset=UTF-8
	    Content-Transfer-Encoding: 8bit
	    
	    Commit 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug")
	    added a debug option for GPMC, but somehow managed to keep it unselectable.
	    
	[...]

	$ git version
	git version 2.6.0

The obvious improvement is to strip all headers like git am does without
--scissors.

If someone wants a bounce of the original mail, just ask per PM.

Best regards
Uwe


On Wed, Oct 07, 2015 at 03:41:19AM -0700, Tony Lindgren wrote:
> * Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [151007 00:57]:
> > On Wed, Oct 07, 2015 at 10:45:50AM +0300, Roger Quadros wrote:
> > > 
> > > How about this instead?
> > > 
> > > NOTE: Apart from matching the register setup with the bootloader you also need to
> > > match the GPMC FCLK frequency used by the bootloader else the GPMC timings
> > > won't be identical with the bootloader timings.
> > Yeah, sounds better, thanks.
> > 
> > > Also you might need to build this patch on top of
> > > http://article.gmane.org/gmane.linux.kernel/2054796
> > I talked to Tony about this patch yesterday on irc, but I didn't find it
> > in the archives yet when I sent my mail.
> 
> Yes sorry here's a repost with your and Roger's changes folded in and
> edited a bit. Probably best to keep them together with this patch.
> 
> Does the following look OK to you guys?
> 
> Regards,
> 
> Tony
> 
> 8< ----------------
> From: Tony Lindgren <tony@atomide.com>
> Date: Tue, 6 Oct 2015 05:36:17 -0700
> Subject: [PATCH] memory: omap-gpmc: Fix unselectable debug option for GPMC
> MIME-Version: 1.0
> Content-Type: text/plain; charset=UTF-8
> Content-Transfer-Encoding: 8bit
> 
> Commit 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug")
> added a debug option for GPMC, but somehow managed to keep it unselectable.
> 
> This probably happened because I had some uncommitted changes and the
> GPMC option is selected in the platform specific Kconfig.
> 
> Let's also update the description a bit, it does not mention that
> enabling the debug option also disables the reset of GPMC controller
> during the init as pointed out by Uwe Kleine-König
> <u.kleine-koenig@pengutronix.de> and Roger Quadros <rogerq@ti.com>.
> 
> Fixes: 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug")
> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> 
> --- a/drivers/memory/Kconfig
> +++ b/drivers/memory/Kconfig
> @@ -58,12 +58,18 @@ config OMAP_GPMC
>  	  memory drives like NOR, NAND, OneNAND, SRAM.
>  
>  config OMAP_GPMC_DEBUG
> -	bool
> +	bool "Enable GPMC debug output and skip reset of GPMC during init"
>  	depends on OMAP_GPMC
>  	help
>  	  Enables verbose debugging mostly to decode the bootloader provided
> -	  timings. Enable this during development to configure devices
> -	  connected to the GPMC bus.
> +	  timings. To preserve the bootloader provided timings, the reset
> +	  of GPMC is skipped during init. Enable this during development to
> +	  configure devices connected to the GPMC bus.
> +
> +	  NOTE: In addition to matching the register setup with the bootloader
> +	  you also need to match the GPMC FCLK frequency used by the
> +	  bootloader or else the GPMC timings won't be identical with the
> +	  bootloader timings.
>  
>  config MVEBU_DEVBUS
>  	bool "Marvell EBU Device Bus Controller"
> 

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |