[PATCH 1/2] ARM: dts: bcm5301x: Add BCM SVK DT files

[jonmason@broadcom.com (Jon Mason)]

On Sat, Oct 10, 2015 at 04:39:00PM +0200, Hauke Mehrtens wrote:
> On 10/03/2015 12:22 AM, Jon Mason wrote:
> > Add device tree files for Broadcom Northstar based SVKs.  Since the
> > bcm5301x.dtsi already exists, all that is necessary is the dts files to
> > enable the UARTs (and specify the RAM size for the 4708/9).  With these
> > files, the SVKs are able to boot to shell.
> > 
> > Signed-off-by: Jon Mason <jonmason@broadcom.com>
> > ---
> >  arch/arm/boot/dts/Makefile       |  5 +++-
> >  arch/arm/boot/dts/bcm94708.dts   | 52 +++++++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/bcm94709.dts   | 52 +++++++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/bcm953012k.dts | 59 ++++++++++++++++++++++++++++++++++++++++
> >  4 files changed, 167 insertions(+), 1 deletion(-)
> >  create mode 100644 arch/arm/boot/dts/bcm94708.dts
> >  create mode 100644 arch/arm/boot/dts/bcm94709.dts
> >  create mode 100644 arch/arm/boot/dts/bcm953012k.dts
> > 
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 233159d..96a1b58 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -72,7 +72,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
> >  	bcm47081-buffalo-wzr-900dhp.dtb \
> >  	bcm4709-asus-rt-ac87u.dtb \
> >  	bcm4709-buffalo-wxr-1900dhp.dtb \
> > -	bcm4709-netgear-r8000.dtb
> > +	bcm4709-netgear-r8000.dtb \
> > +	bcm94708.dtb \
> > +	bcm94709.dtb \
> > +	bcm953012k.dtb
> >  dtb-$(CONFIG_ARCH_BCM_63XX) += \
> >  	bcm963138dvt.dtb
> >  dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
> > diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
> > new file mode 100644
> > index 0000000..57a74c6
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/bcm94708.dts
> 
> Currently the files are named beginning with the chip name something
> like this should fit better the other naming schema:
> arch/arm/boot/dts/bcm4708-brcm-bcm94708.dts

Sorry, I was following the namign schema that we've been using on
other Broadcom SVKs in the Linux device tree directory.  For example,
arch/arm/boot/dts/bcm911360_entphn.dts
arch/arm/boot/dts/bcm911360k.dts
arch/arm/boot/dts/bcm958300k.dts
arch/arm/boot/dts/bcm958305k.dts
arch/arm/boot/dts/bcm958625k.dts
arch/arm/boot/dts/bcm963138dvt.dts

Also, this is the name we have been using internally.  So, it will
making migrating to newer kernels much easier.

> 
> > @@ -0,0 +1,52 @@
> > +/*
> > + *  BSD LICENSE
> > + *
> > + *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
> > + *
> > + *  Redistribution and use in source and binary forms, with or without
> > + *  modification, are permitted provided that the following conditions
> > + *  are met:
> > + *
> > + *    * Redistributions of source code must retain the above copyright
> > + *      notice, this list of conditions and the following disclaimer.
> > + *    * Redistributions in binary form must reproduce the above copyright
> > + *      notice, this list of conditions and the following disclaimer in
> > + *      the documentation and/or other materials provided with the
> > + *      distribution.
> > + *    * Neither the name of Broadcom Corporation nor the names of its
> > + *      contributors may be used to endorse or promote products derived
> > + *      from this software without specific prior written permission.
> > + *
> > + *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > + *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> > + *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> > + *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> > + *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> > + *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> > + *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> > + *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> > + *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > + *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> > + *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "bcm5301x.dtsi"
> > +
> > +/ {
> > +	model = "NorthStar SVK (BCM94708)";
> > +	compatible = "brcm,bcm4708";
> 
> The compatible string should also contain this exactly board like this:
> compatible = "brcm,bcm94708", "brcm,bcm4708";

Ok 

> 
> > +
> > +	aliases {
> > +		serial0 = &uart0;
> > +	};
> > +
> > +	chosen {
> > +		bootargs = "console=ttyS0,115200 mem=128M";
> 
> Instead of using mem=128M you should add an extra node like this:
> 
> 	memory {
> 		reg = <0x00000000 0x08000000>;
> 	};
> 
> Does this board only has 128M of RAM? currently we restrict all of them
> to that, but I just want to know.

The 4708/9 SVKs have 128M, but the 53012 has 256M.

> 
> > +	};
> > +};
> > +
> > +&uart0 {
> > +	status = "okay";
> > +};
> > diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
> > new file mode 100644
> > index 0000000..bf4b6e1
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/bcm94709.dts
> > @@ -0,0 +1,52 @@
> > +/*
> > + *  BSD LICENSE
> > + *
> > + *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
> > + *
> > + *  Redistribution and use in source and binary forms, with or without
> > + *  modification, are permitted provided that the following conditions
> > + *  are met:
> > + *
> > + *    * Redistributions of source code must retain the above copyright
> > + *      notice, this list of conditions and the following disclaimer.
> > + *    * Redistributions in binary form must reproduce the above copyright
> > + *      notice, this list of conditions and the following disclaimer in
> > + *      the documentation and/or other materials provided with the
> > + *      distribution.
> > + *    * Neither the name of Broadcom Corporation nor the names of its
> > + *      contributors may be used to endorse or promote products derived
> > + *      from this software without specific prior written permission.
> > + *
> > + *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > + *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> > + *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> > + *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> > + *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> > + *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> > + *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> > + *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> > + *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > + *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> > + *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "bcm5301x.dtsi"
> > +
> > +/ {
> > +	model = "NorthStar SVK (BCM94709)";
> > +	compatible = "brcm,bcm4709", "brcm,bcm4708";
> Better this:
> compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";

It seems to me that this who 4708 base is kind of a misnomer.  They
really are "Northstar".  Would it not be more accurate to change it to
be
compatible = "brcm,bcm4709", "brcm,ns";
?

> 
> > +
> > +	aliases {
> > +		serial0 = &uart0;
> > +	};
> > +
> > +	chosen {
> > +		bootargs = "console=ttyS0,115200 mem=128M";
> same as above.

Ok
 
> > +	};
> > +};
> > +
> > +&uart0 {
> > +	status = "okay";
> > +};
> > diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
> > new file mode 100644
> > index 0000000..1726ba0
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/bcm953012k.dts
> > @@ -0,0 +1,59 @@
> > +/*
> > + *  BSD LICENSE
> > + *
> > + *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
> > + *
> > + *  Redistribution and use in source and binary forms, with or without
> > + *  modification, are permitted provided that the following conditions
> > + *  are met:
> > + *
> > + *    * Redistributions of source code must retain the above copyright
> > + *      notice, this list of conditions and the following disclaimer.
> > + *    * Redistributions in binary form must reproduce the above copyright
> > + *      notice, this list of conditions and the following disclaimer in
> > + *      the documentation and/or other materials provided with the
> > + *      distribution.
> > + *    * Neither the name of Broadcom Corporation nor the names of its
> > + *      contributors may be used to endorse or promote products derived
> > + *      from this software without specific prior written permission.
> > + *
> > + *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > + *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> > + *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> > + *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> > + *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> > + *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> > + *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> > + *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> > + *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > + *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> > + *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "bcm5301x.dtsi"
> > +
> > +/ {
> > +	model = "NorthStar SVK (BCM953012K)";
> > +	compatible = "brcm,bcm5301k", "brcm,bcm4708";
> 
> same as other file.
> 
> > +
> > +	aliases {
> > +		serial0 = &uart0;
> > +		serial1 = &uart1;
> > +	};
> > +
> > +	chosen {
> > +		bootargs = "console=ttyS0,115200";
> 
> Why is no memory size given here at all?

I'll add the 256M.

> 
> > +	};
> > +};
> > +
> > +&uart0 {
> > +	clock-frequency = <62499840>;
> 
> Just out of curiosity on what does this clock frequency depend? I saw
> your patch adding a real clock driver which should make this obsolete.
 
Better to add this now, as the device tree part might be out of sync
for a time.  Also, is it not better to make the UARTs a static clock
and not dependent on the clk driver?

Thanks,
Jon

> > +	status = "okay";
> > +};
> > +
> > +&uart1 {
> > +	clock-frequency = <62499840>;
> > +	status = "okay";
> > +};
> > 
>