* [PATCH] ARM: at91: debug: update prompt for DEBUG_AT91_UART
@ 2015-10-14 7:24 ` Ludovic Desroches
0 siblings, 0 replies; 6+ messages in thread
From: Ludovic Desroches @ 2015-10-14 7:24 UTC (permalink / raw)
To: linux-arm-kernel
Add (read help!) to DEBUG_AT91_UART prompt. It is not obvious there are
such useful information to set DEBUG_UART_PHYS.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
---
arch/arm/Kconfig.debug | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 259c0ca..589e724 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -124,7 +124,7 @@ choice
0x80024000 | 0xf0024000 | UART9
config DEBUG_AT91_UART
- bool "Kernel low-level debugging on Atmel SoCs"
+ bool "Kernel low-level debugging on Atmel SoCs (read help!)"
depends on ARCH_AT91
help
Say Y here if you want the debug print routines to direct
--
2.5.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] ARM: at91: debug: update prompt for DEBUG_AT91_UART
@ 2015-10-14 7:24 ` Ludovic Desroches
0 siblings, 0 replies; 6+ messages in thread
From: Ludovic Desroches @ 2015-10-14 7:24 UTC (permalink / raw)
To: alexandre.belloni, plagnioj, nicolas.ferre
Cc: linux-arm-kernel, linux-kernel, Ludovic Desroches
Add (read help!) to DEBUG_AT91_UART prompt. It is not obvious there are
such useful information to set DEBUG_UART_PHYS.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
---
arch/arm/Kconfig.debug | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 259c0ca..589e724 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -124,7 +124,7 @@ choice
0x80024000 | 0xf0024000 | UART9
config DEBUG_AT91_UART
- bool "Kernel low-level debugging on Atmel SoCs"
+ bool "Kernel low-level debugging on Atmel SoCs (read help!)"
depends on ARCH_AT91
help
Say Y here if you want the debug print routines to direct
--
2.5.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] ARM: at91: debug: update prompt for DEBUG_AT91_UART
2015-10-14 7:24 ` Ludovic Desroches
@ 2015-10-15 14:04 ` Alexandre Belloni
-1 siblings, 0 replies; 6+ messages in thread
From: Alexandre Belloni @ 2015-10-15 14:04 UTC (permalink / raw)
To: linux-arm-kernel
On 14/10/2015 at 09:24:42 +0200, Ludovic Desroches wrote :
> Add (read help!) to DEBUG_AT91_UART prompt. It is not obvious there are
> such useful information to set DEBUG_UART_PHYS.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> ---
> arch/arm/Kconfig.debug | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 259c0ca..589e724 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -124,7 +124,7 @@ choice
> 0x80024000 | 0xf0024000 | UART9
>
> config DEBUG_AT91_UART
> - bool "Kernel low-level debugging on Atmel SoCs"
> + bool "Kernel low-level debugging on Atmel SoCs (read help!)"
> depends on ARCH_AT91
> help
> Say Y here if you want the debug print routines to direct
Isn't the "read help" message from config DEBUG_LL enough? :)
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: at91: debug: update prompt for DEBUG_AT91_UART
@ 2015-10-15 14:04 ` Alexandre Belloni
0 siblings, 0 replies; 6+ messages in thread
From: Alexandre Belloni @ 2015-10-15 14:04 UTC (permalink / raw)
To: Ludovic Desroches; +Cc: plagnioj, nicolas.ferre, linux-arm-kernel, linux-kernel
On 14/10/2015 at 09:24:42 +0200, Ludovic Desroches wrote :
> Add (read help!) to DEBUG_AT91_UART prompt. It is not obvious there are
> such useful information to set DEBUG_UART_PHYS.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> ---
> arch/arm/Kconfig.debug | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 259c0ca..589e724 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -124,7 +124,7 @@ choice
> 0x80024000 | 0xf0024000 | UART9
>
> config DEBUG_AT91_UART
> - bool "Kernel low-level debugging on Atmel SoCs"
> + bool "Kernel low-level debugging on Atmel SoCs (read help!)"
> depends on ARCH_AT91
> help
> Say Y here if you want the debug print routines to direct
Isn't the "read help" message from config DEBUG_LL enough? :)
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: at91: debug: update prompt for DEBUG_AT91_UART
2015-10-15 14:04 ` Alexandre Belloni
@ 2015-10-15 15:35 ` Ludovic Desroches
-1 siblings, 0 replies; 6+ messages in thread
From: Ludovic Desroches @ 2015-10-15 15:35 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Oct 15, 2015 at 04:04:45PM +0200, Alexandre Belloni wrote:
> On 14/10/2015 at 09:24:42 +0200, Ludovic Desroches wrote :
> > Add (read help!) to DEBUG_AT91_UART prompt. It is not obvious there are
> > such useful information to set DEBUG_UART_PHYS.
> >
> > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> > ---
> > arch/arm/Kconfig.debug | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> > index 259c0ca..589e724 100644
> > --- a/arch/arm/Kconfig.debug
> > +++ b/arch/arm/Kconfig.debug
> > @@ -124,7 +124,7 @@ choice
> > 0x80024000 | 0xf0024000 | UART9
> >
> > config DEBUG_AT91_UART
> > - bool "Kernel low-level debugging on Atmel SoCs"
> > + bool "Kernel low-level debugging on Atmel SoCs (read help!)"
> > depends on ARCH_AT91
> > help
> > Say Y here if you want the debug print routines to direct
>
> Isn't the "read help" message from config DEBUG_LL enough? :)
>
It seems not. Up till now we had no description in the read help.
Ludovic
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: at91: debug: update prompt for DEBUG_AT91_UART
@ 2015-10-15 15:35 ` Ludovic Desroches
0 siblings, 0 replies; 6+ messages in thread
From: Ludovic Desroches @ 2015-10-15 15:35 UTC (permalink / raw)
To: Alexandre Belloni
Cc: Ludovic Desroches, plagnioj, nicolas.ferre, linux-arm-kernel,
linux-kernel
On Thu, Oct 15, 2015 at 04:04:45PM +0200, Alexandre Belloni wrote:
> On 14/10/2015 at 09:24:42 +0200, Ludovic Desroches wrote :
> > Add (read help!) to DEBUG_AT91_UART prompt. It is not obvious there are
> > such useful information to set DEBUG_UART_PHYS.
> >
> > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> > ---
> > arch/arm/Kconfig.debug | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> > index 259c0ca..589e724 100644
> > --- a/arch/arm/Kconfig.debug
> > +++ b/arch/arm/Kconfig.debug
> > @@ -124,7 +124,7 @@ choice
> > 0x80024000 | 0xf0024000 | UART9
> >
> > config DEBUG_AT91_UART
> > - bool "Kernel low-level debugging on Atmel SoCs"
> > + bool "Kernel low-level debugging on Atmel SoCs (read help!)"
> > depends on ARCH_AT91
> > help
> > Say Y here if you want the debug print routines to direct
>
> Isn't the "read help" message from config DEBUG_LL enough? :)
>
It seems not. Up till now we had no description in the read help.
Ludovic
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-10-15 15:35 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-10-14 7:24 [PATCH] ARM: at91: debug: update prompt for DEBUG_AT91_UART Ludovic Desroches
2015-10-14 7:24 ` Ludovic Desroches
2015-10-15 14:04 ` Alexandre Belloni
2015-10-15 14:04 ` Alexandre Belloni
2015-10-15 15:35 ` Ludovic Desroches
2015-10-15 15:35 ` Ludovic Desroches
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.