From: Mark Rutland <mark.rutland@arm.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v7 5/9] arm: serial: Add ability to use pre-initialized UARTs
Date: Mon, 19 Oct 2015 17:12:51 +0100 [thread overview]
Message-ID: <20151019161251.GC29001@leverpostej> (raw)
In-Reply-To: <CACRpkdaJ9C3Cs=usvJSND-8Nio6c2pFKewG1xH244QPmXyAhgw@mail.gmail.com>
On Mon, Oct 19, 2015 at 02:57:22PM +0200, Linus Walleij wrote:
> Jon & Grant especially:
>
> On Mon, Oct 19, 2015 at 2:44 PM, Simon Glass <sjg@chromium.org> wrote:
> > Me
> >> I will go in and answer the comment on the DT mailing list so there is
> >> some push atleast.
> >
> > Perhaps if we could see some movement then it would provide
> > encouragement to continue. So far I cannot recall seeing a single
> > U-Boot device tree change accepted in the 4 years I've been involved.
> > That's not to say it hasn't happened, and I hope it is just a
> > reflection on my memory rather than the difficulty level.
>
> OK this isn't working.
>
> I think the problem is that DT bindings have traditionally been merged to
> the kernel by different subsystem maintainers. That means mailing them
> and their mailing lists and this is IMO too complex for U-Boot people
> (or other external people) to have to deal with. As subsystem
> maintainer I'm not very happy about being the one responsible either.
>
> The MAINTAINERS entry for device tree bindings does not state a
> git tree and I've never seen any of the maintainers send a pull request for
> DT binding files. (Beat me up properly if you have, guys.) I've seen
> Grant send some at times.
From Rob Herring
Date Tue, 1 Sep 2015 16:20:13 -0500
Subject [GIT PULL] DeviceTree for 4.3
https://lkml.org/lkml/2015/9/1/526
> I suggest sending U-Boot DT bindings to not only
> devicetree at vger.kernel.org
> but also, as indicated, to Jon Corbet and linux-doc.
I have no problem with patches going to an extended set of lists.
> If noone cares to comment in two weeks, Jon can merge them,
> breaking the status quo on external DT bindings.
>
> The DT bindings maintainance has sadly been a very sad story and if
> the Linux kernel should be the canon repository for them, we
> need to find a simple way for external projects to contribute. Just
> mailing them to devicetree at vger obviously stands the risk of just
> ending up in the memory hole.
Rob, we should organise rotating the reponsibility of picking things up.
I'd been meaning to organise something official previously, and this is
a good kick to do so.
Thanks,
Mark.
next prev parent reply other threads:[~2015-10-19 16:12 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-14 16:55 [U-Boot] [PATCH v7 0/9] Add support for ThunderX 88xx SoC family Sergey Temerkhanov
2015-10-14 16:55 ` [U-Boot] [PATCH v7 1/9] armv8: Add read_mpidr() function Sergey Temerkhanov
2016-01-19 22:33 ` [U-Boot] [U-Boot,v7,1/9] " Tom Rini
2015-10-14 16:55 ` [U-Boot] [PATCH v7 2/9] armv8: New MMU setup code allowing to use 48+ bits PA/VA Sergey Temerkhanov
2016-01-19 22:33 ` [U-Boot] [U-Boot, v7, " Tom Rini
2015-10-14 16:55 ` [U-Boot] [PATCH v7 3/9] armv8: Add Secure Monitor/Hypervisor Call (SMC/HVC) infrastructure Sergey Temerkhanov
2016-01-06 13:04 ` Mateusz Kulikowski
2016-01-07 15:06 ` Michal Simek
2016-01-07 16:26 ` Tom Rini
2016-01-07 19:00 ` Michal Simek
2016-01-07 21:39 ` Mateusz Kulikowski
2016-01-08 10:19 ` Michal Simek
2016-06-23 11:33 ` Dirk Behme
2016-06-25 19:04 ` Mateusz Kulikowski
2016-06-27 11:26 ` Dirk Behme
2016-01-19 22:34 ` [U-Boot] [U-Boot, v7, " Tom Rini
2015-10-14 16:55 ` [U-Boot] [PATCH v7 4/9] armv8: Add psci.h from the Linux kernel Sergey Temerkhanov
2016-01-19 22:34 ` [U-Boot] [U-Boot, v7, " Tom Rini
2015-10-14 16:55 ` [U-Boot] [PATCH v7 5/9] arm: serial: Add ability to use pre-initialized UARTs Sergey Temerkhanov
2015-10-16 21:23 ` Linus Walleij
2015-10-16 22:27 ` Simon Glass
2015-10-17 0:23 ` Tom Rini
2015-10-19 2:41 ` Simon Glass
2015-10-19 22:04 ` Tom Rini
2015-10-19 7:15 ` Linus Walleij
2015-10-19 12:44 ` Simon Glass
2015-10-19 12:57 ` Linus Walleij
2015-10-19 16:12 ` Mark Rutland [this message]
2015-10-19 19:21 ` Rob Herring
2015-10-20 8:10 ` Linus Walleij
2015-10-20 8:15 ` Linus Walleij
2015-10-20 13:05 ` Rob Herring
2015-10-21 20:49 ` Simon Glass
2015-10-23 16:44 ` Tom Rini
2015-10-20 13:00 ` Rob Herring
2015-10-19 22:04 ` Tom Rini
2015-10-19 20:14 ` Rob Herring
2015-10-19 22:09 ` Simon Glass
2015-10-23 18:35 ` Rob Herring
2015-10-26 14:37 ` Simon Glass
2015-10-23 22:51 ` Sergei Temerkhanov
2016-01-19 22:34 ` [U-Boot] [U-Boot, v7, " Tom Rini
2015-10-14 16:55 ` [U-Boot] [PATCH v7 6/9] armv8: cavium: Add the device tree for ThunderX Sergey Temerkhanov
2016-01-19 22:34 ` [U-Boot] [U-Boot, v7, " Tom Rini
2015-10-14 16:55 ` [U-Boot] [PATCH v7 7/9] armv8: cavium: Add ThunderX 88xx board definition Sergey Temerkhanov
2016-01-19 22:34 ` [U-Boot] [U-Boot, v7, " Tom Rini
2015-10-14 16:55 ` [U-Boot] [PATCH v7 8/9] armv8: cavium: Add an implementation of ATF calling functions Sergey Temerkhanov
2016-01-19 22:34 ` [U-Boot] [U-Boot, v7, " Tom Rini
2015-10-14 16:55 ` [U-Boot] [PATCH v7 9/9] armv8: cavium: Get DRAM size from ATF Sergey Temerkhanov
2016-01-19 22:34 ` [U-Boot] [U-Boot,v7,9/9] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151019161251.GC29001@leverpostej \
--to=mark.rutland@arm.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.