* [GIT PULL] at91: dt for 4.4 #2
@ 2015-10-19 19:31 ` Alexandre Belloni
0 siblings, 0 replies; 6+ messages in thread
From: Alexandre Belloni @ 2015-10-19 19:31 UTC (permalink / raw)
To: linux-arm-kernel
Arnd, Olof, Kevin,
A few more DT changes for AT91.
Small fixes and huge addition to the sama5d2 and its evaluation board.
There may be a simple add/add conflict with Linus Walleij pinctrl tree
that should be an issue.
Thanks, best regards,
The following changes since commit a9b672a636a599cc052afcb6837e3177dc53c143:
ARM: at91/dt: sama5d2 Xplained: add device pin muxing (2015-09-23 16:26:47 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git tags/at91-ab-dt2
for you to fetch changes up to 0bddbefb9e731a6090350508f139b9ac3590303c:
ARM: at91/dt: sama5d2 Xplained: add several devices (2015-10-19 21:22:32 +0200)
----------------------------------------------------------------
Second batch of DT changes for 4.4:
- some DT fixes: pullups, disabled property
- the PMC is now a syscon
- great improvement of sama5d2 support
----------------------------------------------------------------
Alexandre Belloni (1):
ARM: at91/dt: use syscon for PMC
Gregory CLEMENT (1):
ARM: at91/dt: sama5d4: add the macb1 node
Ludovic Desroches (2):
ARM: at91/dt: sama5d2: add missing devices
ARM: at91/dt: sama5d2 Xplained: add several devices
Michael Opdenacker (1):
ARM: at91/dt: fix "disabled" property on at91rm9200
Sylvain Rochet (1):
ARM: at91/dt: add pullup on mmc2 data signals
Wenyou Yang (1):
ARM: at91/dt: sama5d2_xplained: add regulator nodes
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 163 ++++++++++++++++++++++++++++
arch/arm/boot/dts/at91rm9200.dtsi | 8 +-
arch/arm/boot/dts/at91sam9260.dtsi | 2 +-
arch/arm/boot/dts/at91sam9261.dtsi | 2 +-
arch/arm/boot/dts/at91sam9263.dtsi | 2 +-
arch/arm/boot/dts/at91sam9g45.dtsi | 2 +-
arch/arm/boot/dts/at91sam9n12.dtsi | 2 +-
arch/arm/boot/dts/at91sam9rl.dtsi | 2 +-
arch/arm/boot/dts/at91sam9x5.dtsi | 2 +-
arch/arm/boot/dts/sama5d2.dtsi | 154 +++++++++++++++++++++++++-
arch/arm/boot/dts/sama5d3.dtsi | 2 +-
arch/arm/boot/dts/sama5d3_mci2.dtsi | 6 +-
arch/arm/boot/dts/sama5d4.dtsi | 32 +++++-
13 files changed, 360 insertions(+), 19 deletions(-)
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 6+ messages in thread* [GIT PULL] at91: dt for 4.4 #2 @ 2015-10-19 19:31 ` Alexandre Belloni 0 siblings, 0 replies; 6+ messages in thread From: Alexandre Belloni @ 2015-10-19 19:31 UTC (permalink / raw) To: Arnd Bergmann, Olof Johansson, arm Cc: Nicolas Ferre, gregory, Sylvain Rochet, Michael Opdenacker, Ludovic Desroches, Jean-Christophe Plagniol-Villard, linux-arm-kernel, linux-kernel Arnd, Olof, Kevin, A few more DT changes for AT91. Small fixes and huge addition to the sama5d2 and its evaluation board. There may be a simple add/add conflict with Linus Walleij pinctrl tree that should be an issue. Thanks, best regards, The following changes since commit a9b672a636a599cc052afcb6837e3177dc53c143: ARM: at91/dt: sama5d2 Xplained: add device pin muxing (2015-09-23 16:26:47 +0200) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git tags/at91-ab-dt2 for you to fetch changes up to 0bddbefb9e731a6090350508f139b9ac3590303c: ARM: at91/dt: sama5d2 Xplained: add several devices (2015-10-19 21:22:32 +0200) ---------------------------------------------------------------- Second batch of DT changes for 4.4: - some DT fixes: pullups, disabled property - the PMC is now a syscon - great improvement of sama5d2 support ---------------------------------------------------------------- Alexandre Belloni (1): ARM: at91/dt: use syscon for PMC Gregory CLEMENT (1): ARM: at91/dt: sama5d4: add the macb1 node Ludovic Desroches (2): ARM: at91/dt: sama5d2: add missing devices ARM: at91/dt: sama5d2 Xplained: add several devices Michael Opdenacker (1): ARM: at91/dt: fix "disabled" property on at91rm9200 Sylvain Rochet (1): ARM: at91/dt: add pullup on mmc2 data signals Wenyou Yang (1): ARM: at91/dt: sama5d2_xplained: add regulator nodes arch/arm/boot/dts/at91-sama5d2_xplained.dts | 163 ++++++++++++++++++++++++++++ arch/arm/boot/dts/at91rm9200.dtsi | 8 +- arch/arm/boot/dts/at91sam9260.dtsi | 2 +- arch/arm/boot/dts/at91sam9261.dtsi | 2 +- arch/arm/boot/dts/at91sam9263.dtsi | 2 +- arch/arm/boot/dts/at91sam9g45.dtsi | 2 +- arch/arm/boot/dts/at91sam9n12.dtsi | 2 +- arch/arm/boot/dts/at91sam9rl.dtsi | 2 +- arch/arm/boot/dts/at91sam9x5.dtsi | 2 +- arch/arm/boot/dts/sama5d2.dtsi | 154 +++++++++++++++++++++++++- arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d3_mci2.dtsi | 6 +- arch/arm/boot/dts/sama5d4.dtsi | 32 +++++- 13 files changed, 360 insertions(+), 19 deletions(-) -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 6+ messages in thread
* [GIT PULL] at91: dt for 4.4 #2 2015-10-19 19:31 ` Alexandre Belloni @ 2015-10-21 8:50 ` Alexandre Belloni -1 siblings, 0 replies; 6+ messages in thread From: Alexandre Belloni @ 2015-10-21 8:50 UTC (permalink / raw) To: linux-arm-kernel Hi, Actually, this built on my machine because one of the headers was left unversionned in my tree. The last patch depends on the MFD tree, I'm not sure how you want to handle that. I can as well drop the last patch and resend a PR. On 19/10/2015 at 21:31:58 +0200, Alexandre Belloni wrote : > Arnd, Olof, Kevin, > > A few more DT changes for AT91. > Small fixes and huge addition to the sama5d2 and its evaluation board. > There may be a simple add/add conflict with Linus Walleij pinctrl tree > that should be an issue. > > Thanks, best regards, > > The following changes since commit a9b672a636a599cc052afcb6837e3177dc53c143: > > ARM: at91/dt: sama5d2 Xplained: add device pin muxing (2015-09-23 16:26:47 +0200) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git tags/at91-ab-dt2 > > for you to fetch changes up to 0bddbefb9e731a6090350508f139b9ac3590303c: > > ARM: at91/dt: sama5d2 Xplained: add several devices (2015-10-19 21:22:32 +0200) > > ---------------------------------------------------------------- > Second batch of DT changes for 4.4: > - some DT fixes: pullups, disabled property > - the PMC is now a syscon > - great improvement of sama5d2 support > > ---------------------------------------------------------------- > Alexandre Belloni (1): > ARM: at91/dt: use syscon for PMC > > Gregory CLEMENT (1): > ARM: at91/dt: sama5d4: add the macb1 node > > Ludovic Desroches (2): > ARM: at91/dt: sama5d2: add missing devices > ARM: at91/dt: sama5d2 Xplained: add several devices > > Michael Opdenacker (1): > ARM: at91/dt: fix "disabled" property on at91rm9200 > > Sylvain Rochet (1): > ARM: at91/dt: add pullup on mmc2 data signals > > Wenyou Yang (1): > ARM: at91/dt: sama5d2_xplained: add regulator nodes > > arch/arm/boot/dts/at91-sama5d2_xplained.dts | 163 ++++++++++++++++++++++++++++ > arch/arm/boot/dts/at91rm9200.dtsi | 8 +- > arch/arm/boot/dts/at91sam9260.dtsi | 2 +- > arch/arm/boot/dts/at91sam9261.dtsi | 2 +- > arch/arm/boot/dts/at91sam9263.dtsi | 2 +- > arch/arm/boot/dts/at91sam9g45.dtsi | 2 +- > arch/arm/boot/dts/at91sam9n12.dtsi | 2 +- > arch/arm/boot/dts/at91sam9rl.dtsi | 2 +- > arch/arm/boot/dts/at91sam9x5.dtsi | 2 +- > arch/arm/boot/dts/sama5d2.dtsi | 154 +++++++++++++++++++++++++- > arch/arm/boot/dts/sama5d3.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_mci2.dtsi | 6 +- > arch/arm/boot/dts/sama5d4.dtsi | 32 +++++- > 13 files changed, 360 insertions(+), 19 deletions(-) > > -- > Alexandre Belloni, Free Electrons > Embedded Linux, Kernel and Android engineering > http://free-electrons.com -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PULL] at91: dt for 4.4 #2 @ 2015-10-21 8:50 ` Alexandre Belloni 0 siblings, 0 replies; 6+ messages in thread From: Alexandre Belloni @ 2015-10-21 8:50 UTC (permalink / raw) To: Arnd Bergmann, Olof Johansson, arm Cc: Nicolas Ferre, gregory, Sylvain Rochet, Michael Opdenacker, Ludovic Desroches, Jean-Christophe Plagniol-Villard, linux-arm-kernel, linux-kernel Hi, Actually, this built on my machine because one of the headers was left unversionned in my tree. The last patch depends on the MFD tree, I'm not sure how you want to handle that. I can as well drop the last patch and resend a PR. On 19/10/2015 at 21:31:58 +0200, Alexandre Belloni wrote : > Arnd, Olof, Kevin, > > A few more DT changes for AT91. > Small fixes and huge addition to the sama5d2 and its evaluation board. > There may be a simple add/add conflict with Linus Walleij pinctrl tree > that should be an issue. > > Thanks, best regards, > > The following changes since commit a9b672a636a599cc052afcb6837e3177dc53c143: > > ARM: at91/dt: sama5d2 Xplained: add device pin muxing (2015-09-23 16:26:47 +0200) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git tags/at91-ab-dt2 > > for you to fetch changes up to 0bddbefb9e731a6090350508f139b9ac3590303c: > > ARM: at91/dt: sama5d2 Xplained: add several devices (2015-10-19 21:22:32 +0200) > > ---------------------------------------------------------------- > Second batch of DT changes for 4.4: > - some DT fixes: pullups, disabled property > - the PMC is now a syscon > - great improvement of sama5d2 support > > ---------------------------------------------------------------- > Alexandre Belloni (1): > ARM: at91/dt: use syscon for PMC > > Gregory CLEMENT (1): > ARM: at91/dt: sama5d4: add the macb1 node > > Ludovic Desroches (2): > ARM: at91/dt: sama5d2: add missing devices > ARM: at91/dt: sama5d2 Xplained: add several devices > > Michael Opdenacker (1): > ARM: at91/dt: fix "disabled" property on at91rm9200 > > Sylvain Rochet (1): > ARM: at91/dt: add pullup on mmc2 data signals > > Wenyou Yang (1): > ARM: at91/dt: sama5d2_xplained: add regulator nodes > > arch/arm/boot/dts/at91-sama5d2_xplained.dts | 163 ++++++++++++++++++++++++++++ > arch/arm/boot/dts/at91rm9200.dtsi | 8 +- > arch/arm/boot/dts/at91sam9260.dtsi | 2 +- > arch/arm/boot/dts/at91sam9261.dtsi | 2 +- > arch/arm/boot/dts/at91sam9263.dtsi | 2 +- > arch/arm/boot/dts/at91sam9g45.dtsi | 2 +- > arch/arm/boot/dts/at91sam9n12.dtsi | 2 +- > arch/arm/boot/dts/at91sam9rl.dtsi | 2 +- > arch/arm/boot/dts/at91sam9x5.dtsi | 2 +- > arch/arm/boot/dts/sama5d2.dtsi | 154 +++++++++++++++++++++++++- > arch/arm/boot/dts/sama5d3.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_mci2.dtsi | 6 +- > arch/arm/boot/dts/sama5d4.dtsi | 32 +++++- > 13 files changed, 360 insertions(+), 19 deletions(-) > > -- > Alexandre Belloni, Free Electrons > Embedded Linux, Kernel and Android engineering > http://free-electrons.com -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 6+ messages in thread
* [GIT PULL] at91: dt for 4.4 #2 2015-10-21 8:50 ` Alexandre Belloni @ 2015-10-21 9:04 ` Arnd Bergmann -1 siblings, 0 replies; 6+ messages in thread From: Arnd Bergmann @ 2015-10-21 9:04 UTC (permalink / raw) To: linux-arm-kernel On Wednesday 21 October 2015 10:50:09 Alexandre Belloni wrote: > Hi, > > Actually, this built on my machine because one of the headers was left > unversionned in my tree. The last patch depends on the MFD tree, I'm not > sure how you want to handle that. I can as well drop the last patch and > resend a PR. > Yes, that would be better. In general, when you have dependencies like this, they should be discussed with all maintainers in advance so we can come up with a plan. Often that means having two branches that both start with the same patch that contains the dependency, but it's probably too late for that now, as the other patch has already been merged to the MFD tree. If that last patch has no dependencies or conflicts with the rest of the changes, you can also get an Ack from us to merge it through the MFD tree, but we normally try to avoid that. Arnd ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PULL] at91: dt for 4.4 #2 @ 2015-10-21 9:04 ` Arnd Bergmann 0 siblings, 0 replies; 6+ messages in thread From: Arnd Bergmann @ 2015-10-21 9:04 UTC (permalink / raw) To: Alexandre Belloni Cc: Olof Johansson, arm, Nicolas Ferre, gregory, Sylvain Rochet, Michael Opdenacker, Ludovic Desroches, Jean-Christophe Plagniol-Villard, linux-arm-kernel, linux-kernel On Wednesday 21 October 2015 10:50:09 Alexandre Belloni wrote: > Hi, > > Actually, this built on my machine because one of the headers was left > unversionned in my tree. The last patch depends on the MFD tree, I'm not > sure how you want to handle that. I can as well drop the last patch and > resend a PR. > Yes, that would be better. In general, when you have dependencies like this, they should be discussed with all maintainers in advance so we can come up with a plan. Often that means having two branches that both start with the same patch that contains the dependency, but it's probably too late for that now, as the other patch has already been merged to the MFD tree. If that last patch has no dependencies or conflicts with the rest of the changes, you can also get an Ack from us to merge it through the MFD tree, but we normally try to avoid that. Arnd ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-10-21 9:04 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-10-19 19:31 [GIT PULL] at91: dt for 4.4 #2 Alexandre Belloni 2015-10-19 19:31 ` Alexandre Belloni 2015-10-21 8:50 ` Alexandre Belloni 2015-10-21 8:50 ` Alexandre Belloni 2015-10-21 9:04 ` Arnd Bergmann 2015-10-21 9:04 ` Arnd Bergmann
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.