All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Horman <horms@verge.net.au>
To: linux-arm-kernel@lists.infradead.org
Subject: Possible Regression due to c074fef5d36e ("of/platform: Defer probes of registered devices").
Date: Mon, 26 Oct 2015 03:20:39 +0000	[thread overview]
Message-ID: <20151026032039.GA1950@verge.net.au> (raw)

Hi,

I have observed a possible regression in next-20151022
due to c074fef5d36e ("of/platform: Defer probes of registered devices").

The problem manifests on the r8a7791 based koelsch board.
With the above patch present booting the board using the shmobile_defconfig
results in no console output. While after reverting the above patch
the boot proceeds all the way to user-space.

With DEBUG_LL and EARLY_PRINTK enabled I was able to capture some console
output. I have included both that boot log, and a log of boot all the way to
userspace with the patch in question reverted.

The problem does not seem to manifiest on other boards for other
Renesas ARM  SoCs that I have access too. In particular the
r8a7790 based lager board; the r8a7790 and r8a7791 are both members
of the R-Car Gen2 family of SoCs.





Boot fail to boot to userspace:
  Tree: : next-20151022
  Config: shmobile_defconfig + DEBUG_LL, EARLY_PRINTK
  Modified dts: bootargs = "earlyprintk console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";

Booting Linux on physical CPU 0x0
Linux version 4.3.0-rc6-next-20151022-dirty (horms@ayumi.isobedori.kobe.vergenet.net) (gcc version 4.6.3 (GCC) ) #189 SMP Mon Oct 26 12:19:34 JST 2015
CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr\x10c5307d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: Koelsch
Ignoring memory block 0x200000000 - 0x240000000
bootconsole [earlycon0] enabled
debug: ignoring loglevel setting.
Memory policy: Data cache writealloc
On node 0 totalpages: 262144
free_area_init_node: node 0, pgdat c06c5080, node_mem_map ef7f8000
  Normal zone: 1536 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 196608 pages, LIFO batch:31
  HighMem zone: 65536 pages, LIFO batch:15
PERCPU: Embedded 10 pages/cpu @ef7c0000 s18048 r0 d22912 u40960
pcpu-alloc: s18048 r0 d22912 u40960 alloc\x10*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
Kernel command line: earlyprintk console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032168K/1048576K available (4996K kernel code, 242K rwdata, 1360K rodata, 300K init, 204K bss, 16408K reserved, 0K cma-reserved, 262144K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
      .text : 0xc0008000 - 0xc063e04c   (6361 kB)
      .init : 0xc063f000 - 0xc068a000   ( 300 kB)
      .data : 0xc068a000 - 0xc06c6900   ( 243 kB)
       .bss : 0xc06c9000 - 0xc06fc354   ( 205 kB)
Hierarchical RCU implementation.
        Build-time adjustment of leaf fanout to 32.
        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf2, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 10.00MHz (virt).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
sched_clock: 56 bits at 10MHz, resolution 100ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 100ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj\x100000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x40009000 - 0x40009058
Unable to boot CPU1 when MD21 is set
CPU1: failed to boot: -524
Brought up 1 CPUs
SMP: Total of 1 processors activated (20.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
No ATAGs?
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
IRQ2 is asserted, installing da9063/da9210 regulator quirk
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
SuperH (H)SCI(F) driver initialized
[drm] Initialized drm 1.1.0 20060810
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
bootconsole [earlycon0] disabled





Boot to userspace:
  Tree: : next-20151022 with c074fef5d36e reverted.
  Config: shmobile_defconfig

Starting kernel ...

Booting Linux on physical CPU 0x0
Linux version 4.3.0-rc6-next-20151022-00001-g4c1ad3d4d4ef (horms@ayumi.isobedori.kobe.vergenet.net) (gcc version 4.6.3 (GCC) ) #188 SMP Mon Oct 26 12:04:54 JST 2015
CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr\x10c5307d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: Koelsch
Ignoring memory block 0x200000000 - 0x240000000
debug: ignoring loglevel setting.
Memory policy: Data cache writealloc
On node 0 totalpages: 262144
free_area_init_node: node 0, pgdat c06c5080, node_mem_map ef7f9000
  Normal zone: 1536 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 196608 pages, LIFO batch:31
  HighMem zone: 65536 pages, LIFO batch:15
PERCPU: Embedded 10 pages/cpu @ef7c1000 s18048 r0 d22912 u40960
pcpu-alloc: s18048 r0 d22912 u40960 alloc\x10*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
Kernel command line: ignore_loglevel rw root=/dev/nfs ip=dhcp
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032172K/1048576K available (4996K kernel code, 242K rwdata, 1360K rodata, 300K init, 204K bss, 16404K reserved, 0K cma-reserved, 262144K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
      .text : 0xc0008000 - 0xc063e04c   (6361 kB)
      .init : 0xc063f000 - 0xc068a000   ( 300 kB)
      .data : 0xc068a000 - 0xc06c6900   ( 243 kB)
       .bss : 0xc06c9000 - 0xc06fc354   ( 205 kB)
Hierarchical RCU implementation.
        Build-time adjustment of leaf fanout to 32.
        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf2, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 10.00MHz (virt).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
sched_clock: 56 bits at 10MHz, resolution 100ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 100ns
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj\x100000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x40009000 - 0x40009058
Unable to boot CPU1 when MD21 is set
CPU1: failed to boot: -524
Brought up 1 CPUs
SMP: Total of 1 processors activated (20.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
renesas_irqc e61c0000.interrupt-controller: driving 10 irqs
sh-pfc e6060000.pfc: r8a77910_pfc support registered
No ATAGs?
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
IRQ2 is asserted, installing da9063/da9210 regulator quirk
gpio-regulator regulator@1: Could not obtain regulator setting GPIOs: -517
gpio-regulator regulator@3: Could not obtain regulator setting GPIOs: -517
gpio-regulator regulator@5: Could not obtain regulator setting GPIOs: -517
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
i2c 6-0058: Masking da9063 interrupt sources
i2c 6-0068: Masking da9210 interrupt sources
i2c 6-0068: IRQ2 is not asserted, removing quirk
i2c-sh_mobile e60b0000.i2c: I2C adapter 6, bus speed 100000 Hz
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Couldn't find a device for node '/clocks/mstp1_clks@e6150134'
Couldn't find a device for node '/clocks/mstp1_clks@e6150134'
sh_cmt ffca0000.timer: ch0: used for clock events
sh_cmt ffca0000.timer: ch1: used as clock source
clocksource: ffca0000.timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000000 ns
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
gpio_rcar e6050000.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
gpio_rcar e6051000.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
gpio_rcar e6052000.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
gpio_rcar e6053000.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
gpio_rcar e6054000.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
gpio_rcar e6055000.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
gpio_rcar e6055400.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
gpio_rcar e6055800.gpio: driving 26 GPIOs
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
pci-rcar-gen2 ee090000.pci: PCI: bus0 revision 11
pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0xee080000-0xee0810ff]
pci_bus 0000:00: root bus resource [mem 0xee080000-0xee0810ff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [1033:0000] type 00 class 0x060000
pci 0000:00:00.0: reg 0x10: [mem 0xee090800-0xee090bff]
pci 0000:00:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
pci 0000:00:01.0: [1033:0035] type 00 class 0x0c0310
pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:02.0: [1033:00e0] type 00 class 0x0c0320
pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
PCI: bus0: Fast back to back transfers disabled
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
pci 0000:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff]
pci 0000:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff]
pci 0000:00:01.0: enabling device (0140 -> 0142)
pci 0000:00:02.0: enabling device (0140 -> 0142)
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
pci-rcar-gen2 ee0d0000.pci: PCI: bus0 revision 11
pci-rcar-gen2 ee0d0000.pci: PCI host bridge to bus 0001:01
pci_bus 0001:01: root bus resource [io  0xee0c0000-0xee0c10ff]
pci_bus 0001:01: root bus resource [mem 0xee0c0000-0xee0c10ff]
pci_bus 0001:01: No busn resource found for root bus, will use [bus 01-ff]
pci 0001:01:00.0: [1033:0000] type 00 class 0x060000
pci 0001:01:00.0: reg 0x10: [mem 0xee0d0800-0xee0d0bff]
pci 0001:01:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
pci 0001:01:01.0: [1033:0035] type 00 class 0x0c0310
pci 0001:01:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
pci 0001:01:01.0: supports D1 D2
pci 0001:01:01.0: PME# supported from D0 D1 D2 D3hot
pci 0001:01:02.0: [1033:00e0] type 00 class 0x0c0320
pci 0001:01:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
pci 0001:01:02.0: supports D1 D2
pci 0001:01:02.0: PME# supported from D0 D1 D2 D3hot
PCI: bus1: Fast back to back transfers disabled
pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
pci 0001:01:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff]
pci 0001:01:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff]
pci 0001:01:01.0: enabling device (0140 -> 0142)
pci 0001:01:02.0: enabling device (0140 -> 0142)
Couldn't find a device for node '/clocks/mstp3_clks@e615013c'
Couldn't find a device for node '/clocks/mstp3_clks@e615013c'
Couldn't find a device for node '/clocks/pcie_bus_clk'
rcar-pcie fe000000.pcie: PCIe link down
Couldn't find a device for node '/clocks/mstp2_clks@e6150138'
Couldn't find a device for node '/clocks/mstp2_clks@e6150138'
Couldn't find a device for node '/clocks/mstp5_clks@e6150144'
Couldn't find a device for node '/clocks/mstp5_clks@e6150144'
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
SuperH (H)SCI(F) driver initialized
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
e6e60000.serial: ttySC0 at MMIO 0xe6e60000 (irq = 109, base_baud = 0) is a scif
console [ttySC0] enabled
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
e6e68000.serial: ttySC1 at MMIO 0xe6e68000 (irq = 110, base_baud = 0) is a scif
[drm] Initialized drm 1.1.0 20060810
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
rcar-du feb00000.display: failed to initialize DRM/KMS (-517)
da9063 6-0058: Device detected (chip-ID: 0x61, var-ID: 0x30)
Couldn't find a device for node '/clocks/mstp8_clks@e6150990'
Couldn't find a device for node '/clocks/mstp8_clks@e6150990'
scsi host0: sata_rcar
ata1: SATA max UDMA/133 irq 112
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
renesas_spi e6b10000.spi: DMA available
m25p80 spi0.0: unrecognized JEDEC id bytes: 01,  2, 20
renesas_spi e6b10000.spi: probed
Couldn't find a device for node '/clocks/mstp0_clks@e6150130'
Couldn't find a device for node '/clocks/mstp0_clks@e6150130'
spi_sh_msiof e6e20000.spi: DMA available
Couldn't find a device for node '/clocks/mstp8_clks@e6150990'
libphy: sh_mii: probed
sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 2e:09:0a:00:6d:00, IRQ 111.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.0: EHCI Host Controller
ehci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.0: irq 123, io mem 0xee081000
ehci-pci 0000:00:02.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-pci 0001:01:02.0: EHCI Host Controller
ehci-pci 0001:01:02.0: new USB bus registered, assigned bus number 2
ehci-pci 0001:01:02.0: irq 124, io mem 0xee0c1000
ehci-pci 0001:01:02.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:01.0: OHCI PCI host controller
ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:01.0: irq 123, io mem 0xee080000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci-pci 0001:01:01.0: OHCI PCI host controller
ohci-pci 0001:01:01.0: new USB bus registered, assigned bus number 4
ohci-pci 0001:01:01.0: irq 124, io mem 0xee0c0000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
sh-pfc e6060000.pfc: pin GP_7_23 already requested by ee090000.pci; cannot claim for e6590000.usb
sh-pfc e6060000.pfc: pin-247 (e6590000.usb) status -22
sh-pfc e6060000.pfc: could not request pin 247 (GP_7_23) from group usb0  on device sh-pfc
renesas_usbhs e6590000.usb: Error applying setting, reverse things back
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
renesas_usbhs e6590000.usb: transceiver found
renesas_usbhs e6590000.usb: gadget probed
phy phy-e6590100.usb-phy.1: phy init failed --> -16
renesas_usbhs e6590000.usb: probed
using random self ethernet address
using random host ethernet address
usb0: HOST MAC f6:6e:8b:ce:92:82
usb0: MAC fe:cf:36:fc:5b:75
using random self ethernet address
using random host ethernet address
g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
g_ether gadget: g_ether ready
renesas_usbhs e6590000.usb: fifo select error
ata1: link resume succeeded after 1 retries
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
Couldn't find a device for node '/clocks/mstp9_clks@e6150994'
at24 2-0050: 256 byte 24c02 EEPROM, writable, 16 bytes/write
i2c-rcar e6530000.i2c: probed
adv7180 2-0020: chip found @ 0x20 (e6530000.i2c)
Couldn't find a device for node '/clocks/mstp8_clks@e6150990'
soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
Couldn't find a device for node '/clocks/mstp1_clks@e6150134'
Couldn't find a device for node '/clocks/mstp1_clks@e6150134'
Couldn't find a device for node '/clocks/mstp1_clks@e6150134'
Couldn't find a device for node '/clocks/mstp1_clks@e6150134'
Couldn't find a device for node '/clocks/mstp1_clks@e6150134'
Couldn't find a device for node '/clocks/mstp1_clks@e6150134'
ata1: SATA link down (SStatus 0 SControl 300)
Couldn't find a device for node '/clocks/mstp5_clks@e6150144'
rcar_thermal e61f0000.thermal: 1 sensor probed
Couldn't find a device for node '/clocks/mstp3_clks@e615013c'
Couldn't find a device for node '/clocks/mstp3_clks@e615013c'
sh_mobile_sdhi ee100000.sd: Got CD GPIO
sh_mobile_sdhi ee100000.sd: Got WP GPIO
sh_mobile_sdhi ee100000.sd: mmc0 base at 0xee100000 clock rate 97 MHz
Couldn't find a device for node '/clocks/mstp3_clks@e615013c'
Couldn't find a device for node '/clocks/mstp3_clks@e615013c'
sh_mobile_sdhi ee140000.sd: Got CD GPIO
sh_mobile_sdhi ee140000.sd: Got WP GPIO
sh_mobile_sdhi ee140000.sd: mmc1 base at 0xee140000 clock rate 48 MHz
Couldn't find a device for node '/clocks/mstp3_clks@e615013c'
Couldn't find a device for node '/clocks/mstp3_clks@e615013c'
sh_mobile_sdhi ee160000.sd: Got CD GPIO
sh_mobile_sdhi ee160000.sd: mmc2 base at 0xee160000 clock rate 48 MHz
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
Couldn't find a device for node '/clocks/audio_clk_a'
Couldn't find a device for node '/clocks/audio_clk_b'
Couldn't find a device for node '/clocks/audio_clk_c'
Couldn't find a device for node '/clocks/m2_clk'
rcar_sound ec500000.sound: probed
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
Couldn't find a device for node '/clocks/cpg_clocks@e6150000'
Couldn't find a device for node '/clocks/cpg_clocks@e6150000'
cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1300000 KHz
cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1312500 KHz
Registering SWP/SWPB emulation handler
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
rcar-du feb00000.display: failed to initialize DRM/KMS (-517)
Couldn't find a device for node '/clocks/mstp10_clks@e6150998'
asoc-simple-card sound: ak4642-hifi <-> ec500000.sound mapping ok
mmc2: new high speed SDHC card at address b368
mmcblk0: mmc2:b368 SD08G 7.41 GiB 
 mmcblk0: p1
random: nonblocking pool is initialized
i2c-rcar e6530000.i2c: error -110 : 0
i2c-rcar e6530000.i2c: error -16 : 0
i2c-rcar e6530000.i2c: error -16 : 0
i2c-rcar e6530000.i2c: error -16 : 0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
rcar-du feb00000.display: failed to initialize DRM/KMS (-517)
input: keyboard as /devices/platform/keyboard/input/input0
hctosys: unable to open rtc device (rtc0)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
Couldn't find a device for node '/clocks/mstp7_clks@e615014c'
rcar-du feb00000.display: failed to initialize DRM/KMS (-517)
sh-eth ee700000.ethernet eth0: attached PHY 1 (IRQ 408) to driver Micrel KSZ8041RNLI
IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
Sending DHCP requests .
sh-eth ee700000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
., OK
IP-Config: Got DHCP answer from 10.3.3.2, my address is 10.3.3.159
IP-Config: Complete:
     device=eth0, hwaddr.:09:0a:00:6d:00, ipaddr\x10.3.3.159, mask%5.255.255.0, gw\x10.3.3.2
     host\x10.3.3.159, domain=isobedori.kobe.vergenet.net kanocho.kobe.vergenet.net vergenet., nis-domain=(none)
     bootserver\x10.3.3.135, rootserver\x10.3.3.135, rootpath=/srv/nfs/koelsch-armhf,rsize\x1024,wsize\x1024
     nameserver0\x10.3.3.2, nameserver1=8.8.8.8
SDHI0 Vcc: disabling
SDHI0 VccQ: disabling
SDHI1 Vcc: disabling
SDHI1 VccQ: disabling
ALSA device list:
  #0: rsnd-dai.0-ak4642-hifi
VFS: Mounted root (nfs filesystem) on device 0:13.
devtmpfs: mounted
Freeing unused kernel memory: 300K (c063f000 - c068a000)
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevdudevd[921]: starting version 175
.
Synthesizing the initial hotplug events...done.
i2c-rcar e6530000.i2c: error -16 : 0
Waiting for /dev to be fully populated...done.
Activating swap...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux 2.20.1
done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files....
Cleaning up ifupdown....
Setting up networking....
Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/2e:09:0a:00:6d:00
Sending on   LPF/eth0/2e:09:0a:00:6d:00
Sending on   Socket/fallback
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 10.3.3.2
RTNETLINK answers: File exists
bound to 10.3.3.159 -- renewal in 280 seconds.
done.
Cleaning up temporary files....
Setting up ALSA...warning: 'alsactl restore' failed with error message 'No state is present for card rsnddai0ak4642h
Found hardware: "rsnd-dai_0-ak46" "" "" "" ""
Hardware is initialized using a generic method
No state is present for card rsnddai0ak4642h'...i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
done.
Setting kernel variables ...done.
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Starting enhanced syslogd: rsyslogd.
Starting periodic command scheduler: cron.
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd.
---
Testing QSPI performance. Expect 1MB/s or more
dd: opening `/dev/mtd0': No such file or directory
da39a3ee5e6b4b0d3255bfef95601890afd80709  -
---
Testing CPU freq. Expect two or three different frequencies
1500000
1500000
750000
---

Debian GNU/Linux wheezy/sid debian ttySC0

debian login: 


WARNING: multiple messages have this Message-ID (diff)
From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: Possible Regression due to c074fef5d36e ("of/platform: Defer probes of registered devices").
Date: Mon, 26 Oct 2015 12:20:39 +0900	[thread overview]
Message-ID: <20151026032039.GA1950@verge.net.au> (raw)

Hi,

I have observed a possible regression in next-20151022
due to c074fef5d36e ("of/platform: Defer probes of registered devices").

The problem manifests on the r8a7791 based koelsch board.
With the above patch present booting the board using the shmobile_defconfig
results in no console output. While after reverting the above patch
the boot proceeds all the way to user-space.

With DEBUG_LL and EARLY_PRINTK enabled I was able to capture some console
output. I have included both that boot log, and a log of boot all the way to
userspace with the patch in question reverted.

The problem does not seem to manifiest on other boards for other
Renesas ARM  SoCs that I have access too. In particular the
r8a7790 based lager board; the r8a7790 and r8a7791 are both members
of the R-Car Gen2 family of SoCs.





Boot fail to boot to userspace:
  Tree: : next-20151022
  Config: shmobile_defconfig + DEBUG_LL, EARLY_PRINTK
  Modified dts: bootargs = "earlyprintk console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";

Booting Linux on physical CPU 0x0
Linux version 4.3.0-rc6-next-20151022-dirty (horms at ayumi.isobedori.kobe.vergenet.net) (gcc version 4.6.3 (GCC) ) #189 SMP Mon Oct 26 12:19:34 JST 2015
CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5307d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: Koelsch
Ignoring memory block 0x200000000 - 0x240000000
bootconsole [earlycon0] enabled
debug: ignoring loglevel setting.
Memory policy: Data cache writealloc
On node 0 totalpages: 262144
free_area_init_node: node 0, pgdat c06c5080, node_mem_map ef7f8000
  Normal zone: 1536 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 196608 pages, LIFO batch:31
  HighMem zone: 65536 pages, LIFO batch:15
PERCPU: Embedded 10 pages/cpu @ef7c0000 s18048 r0 d22912 u40960
pcpu-alloc: s18048 r0 d22912 u40960 alloc=10*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
Kernel command line: earlyprintk console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032168K/1048576K available (4996K kernel code, 242K rwdata, 1360K rodata, 300K init, 204K bss, 16408K reserved, 0K cma-reserved, 262144K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
      .text : 0xc0008000 - 0xc063e04c   (6361 kB)
      .init : 0xc063f000 - 0xc068a000   ( 300 kB)
      .data : 0xc068a000 - 0xc06c6900   ( 243 kB)
       .bss : 0xc06c9000 - 0xc06fc354   ( 205 kB)
Hierarchical RCU implementation.
        Build-time adjustment of leaf fanout to 32.
        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 10.00MHz (virt).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
sched_clock: 56 bits at 10MHz, resolution 100ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 100ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x40009000 - 0x40009058
Unable to boot CPU1 when MD21 is set
CPU1: failed to boot: -524
Brought up 1 CPUs
SMP: Total of 1 processors activated (20.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
No ATAGs?
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
IRQ2 is asserted, installing da9063/da9210 regulator quirk
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
SuperH (H)SCI(F) driver initialized
[drm] Initialized drm 1.1.0 20060810
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
bootconsole [earlycon0] disabled





Boot to userspace:
  Tree: : next-20151022 with c074fef5d36e reverted.
  Config: shmobile_defconfig

Starting kernel ...

Booting Linux on physical CPU 0x0
Linux version 4.3.0-rc6-next-20151022-00001-g4c1ad3d4d4ef (horms at ayumi.isobedori.kobe.vergenet.net) (gcc version 4.6.3 (GCC) ) #188 SMP Mon Oct 26 12:04:54 JST 2015
CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5307d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: Koelsch
Ignoring memory block 0x200000000 - 0x240000000
debug: ignoring loglevel setting.
Memory policy: Data cache writealloc
On node 0 totalpages: 262144
free_area_init_node: node 0, pgdat c06c5080, node_mem_map ef7f9000
  Normal zone: 1536 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 196608 pages, LIFO batch:31
  HighMem zone: 65536 pages, LIFO batch:15
PERCPU: Embedded 10 pages/cpu @ef7c1000 s18048 r0 d22912 u40960
pcpu-alloc: s18048 r0 d22912 u40960 alloc=10*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
Kernel command line: ignore_loglevel rw root=/dev/nfs ip=dhcp
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032172K/1048576K available (4996K kernel code, 242K rwdata, 1360K rodata, 300K init, 204K bss, 16404K reserved, 0K cma-reserved, 262144K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
      .text : 0xc0008000 - 0xc063e04c   (6361 kB)
      .init : 0xc063f000 - 0xc068a000   ( 300 kB)
      .data : 0xc068a000 - 0xc06c6900   ( 243 kB)
       .bss : 0xc06c9000 - 0xc06fc354   ( 205 kB)
Hierarchical RCU implementation.
        Build-time adjustment of leaf fanout to 32.
        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 10.00MHz (virt).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
sched_clock: 56 bits at 10MHz, resolution 100ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 100ns
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x40009000 - 0x40009058
Unable to boot CPU1 when MD21 is set
CPU1: failed to boot: -524
Brought up 1 CPUs
SMP: Total of 1 processors activated (20.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
renesas_irqc e61c0000.interrupt-controller: driving 10 irqs
sh-pfc e6060000.pfc: r8a77910_pfc support registered
No ATAGs?
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
IRQ2 is asserted, installing da9063/da9210 regulator quirk
gpio-regulator regulator at 1: Could not obtain regulator setting GPIOs: -517
gpio-regulator regulator at 3: Could not obtain regulator setting GPIOs: -517
gpio-regulator regulator at 5: Could not obtain regulator setting GPIOs: -517
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
i2c 6-0058: Masking da9063 interrupt sources
i2c 6-0068: Masking da9210 interrupt sources
i2c 6-0068: IRQ2 is not asserted, removing quirk
i2c-sh_mobile e60b0000.i2c: I2C adapter 6, bus speed 100000 Hz
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Couldn't find a device for node '/clocks/mstp1_clks at e6150134'
Couldn't find a device for node '/clocks/mstp1_clks at e6150134'
sh_cmt ffca0000.timer: ch0: used for clock events
sh_cmt ffca0000.timer: ch1: used as clock source
clocksource: ffca0000.timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000000 ns
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
gpio_rcar e6050000.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
gpio_rcar e6051000.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
gpio_rcar e6052000.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
gpio_rcar e6053000.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
gpio_rcar e6054000.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
gpio_rcar e6055000.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
gpio_rcar e6055400.gpio: driving 32 GPIOs
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
gpio_rcar e6055800.gpio: driving 26 GPIOs
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
pci-rcar-gen2 ee090000.pci: PCI: bus0 revision 11
pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0xee080000-0xee0810ff]
pci_bus 0000:00: root bus resource [mem 0xee080000-0xee0810ff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [1033:0000] type 00 class 0x060000
pci 0000:00:00.0: reg 0x10: [mem 0xee090800-0xee090bff]
pci 0000:00:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
pci 0000:00:01.0: [1033:0035] type 00 class 0x0c0310
pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:02.0: [1033:00e0] type 00 class 0x0c0320
pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
PCI: bus0: Fast back to back transfers disabled
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
pci 0000:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff]
pci 0000:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff]
pci 0000:00:01.0: enabling device (0140 -> 0142)
pci 0000:00:02.0: enabling device (0140 -> 0142)
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
pci-rcar-gen2 ee0d0000.pci: PCI: bus0 revision 11
pci-rcar-gen2 ee0d0000.pci: PCI host bridge to bus 0001:01
pci_bus 0001:01: root bus resource [io  0xee0c0000-0xee0c10ff]
pci_bus 0001:01: root bus resource [mem 0xee0c0000-0xee0c10ff]
pci_bus 0001:01: No busn resource found for root bus, will use [bus 01-ff]
pci 0001:01:00.0: [1033:0000] type 00 class 0x060000
pci 0001:01:00.0: reg 0x10: [mem 0xee0d0800-0xee0d0bff]
pci 0001:01:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
pci 0001:01:01.0: [1033:0035] type 00 class 0x0c0310
pci 0001:01:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
pci 0001:01:01.0: supports D1 D2
pci 0001:01:01.0: PME# supported from D0 D1 D2 D3hot
pci 0001:01:02.0: [1033:00e0] type 00 class 0x0c0320
pci 0001:01:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
pci 0001:01:02.0: supports D1 D2
pci 0001:01:02.0: PME# supported from D0 D1 D2 D3hot
PCI: bus1: Fast back to back transfers disabled
pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
pci 0001:01:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff]
pci 0001:01:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff]
pci 0001:01:01.0: enabling device (0140 -> 0142)
pci 0001:01:02.0: enabling device (0140 -> 0142)
Couldn't find a device for node '/clocks/mstp3_clks at e615013c'
Couldn't find a device for node '/clocks/mstp3_clks at e615013c'
Couldn't find a device for node '/clocks/pcie_bus_clk'
rcar-pcie fe000000.pcie: PCIe link down
Couldn't find a device for node '/clocks/mstp2_clks at e6150138'
Couldn't find a device for node '/clocks/mstp2_clks at e6150138'
Couldn't find a device for node '/clocks/mstp5_clks at e6150144'
Couldn't find a device for node '/clocks/mstp5_clks at e6150144'
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
SuperH (H)SCI(F) driver initialized
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
e6e60000.serial: ttySC0 at MMIO 0xe6e60000 (irq = 109, base_baud = 0) is a scif
console [ttySC0] enabled
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
e6e68000.serial: ttySC1 at MMIO 0xe6e68000 (irq = 110, base_baud = 0) is a scif
[drm] Initialized drm 1.1.0 20060810
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
rcar-du feb00000.display: failed to initialize DRM/KMS (-517)
da9063 6-0058: Device detected (chip-ID: 0x61, var-ID: 0x30)
Couldn't find a device for node '/clocks/mstp8_clks at e6150990'
Couldn't find a device for node '/clocks/mstp8_clks at e6150990'
scsi host0: sata_rcar
ata1: SATA max UDMA/133 irq 112
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
renesas_spi e6b10000.spi: DMA available
m25p80 spi0.0: unrecognized JEDEC id bytes: 01,  2, 20
renesas_spi e6b10000.spi: probed
Couldn't find a device for node '/clocks/mstp0_clks at e6150130'
Couldn't find a device for node '/clocks/mstp0_clks at e6150130'
spi_sh_msiof e6e20000.spi: DMA available
Couldn't find a device for node '/clocks/mstp8_clks at e6150990'
libphy: sh_mii: probed
sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 2e:09:0a:00:6d:00, IRQ 111.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.0: EHCI Host Controller
ehci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.0: irq 123, io mem 0xee081000
ehci-pci 0000:00:02.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-pci 0001:01:02.0: EHCI Host Controller
ehci-pci 0001:01:02.0: new USB bus registered, assigned bus number 2
ehci-pci 0001:01:02.0: irq 124, io mem 0xee0c1000
ehci-pci 0001:01:02.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:01.0: OHCI PCI host controller
ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:01.0: irq 123, io mem 0xee080000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci-pci 0001:01:01.0: OHCI PCI host controller
ohci-pci 0001:01:01.0: new USB bus registered, assigned bus number 4
ohci-pci 0001:01:01.0: irq 124, io mem 0xee0c0000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
sh-pfc e6060000.pfc: pin GP_7_23 already requested by ee090000.pci; cannot claim for e6590000.usb
sh-pfc e6060000.pfc: pin-247 (e6590000.usb) status -22
sh-pfc e6060000.pfc: could not request pin 247 (GP_7_23) from group usb0  on device sh-pfc
renesas_usbhs e6590000.usb: Error applying setting, reverse things back
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
renesas_usbhs e6590000.usb: transceiver found
renesas_usbhs e6590000.usb: gadget probed
phy phy-e6590100.usb-phy.1: phy init failed --> -16
renesas_usbhs e6590000.usb: probed
using random self ethernet address
using random host ethernet address
usb0: HOST MAC f6:6e:8b:ce:92:82
usb0: MAC fe:cf:36:fc:5b:75
using random self ethernet address
using random host ethernet address
g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
g_ether gadget: g_ether ready
renesas_usbhs e6590000.usb: fifo select error
ata1: link resume succeeded after 1 retries
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
Couldn't find a device for node '/clocks/mstp9_clks at e6150994'
at24 2-0050: 256 byte 24c02 EEPROM, writable, 16 bytes/write
i2c-rcar e6530000.i2c: probed
adv7180 2-0020: chip found @ 0x20 (e6530000.i2c)
Couldn't find a device for node '/clocks/mstp8_clks at e6150990'
soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
Couldn't find a device for node '/clocks/mstp1_clks at e6150134'
Couldn't find a device for node '/clocks/mstp1_clks at e6150134'
Couldn't find a device for node '/clocks/mstp1_clks at e6150134'
Couldn't find a device for node '/clocks/mstp1_clks at e6150134'
Couldn't find a device for node '/clocks/mstp1_clks at e6150134'
Couldn't find a device for node '/clocks/mstp1_clks at e6150134'
ata1: SATA link down (SStatus 0 SControl 300)
Couldn't find a device for node '/clocks/mstp5_clks at e6150144'
rcar_thermal e61f0000.thermal: 1 sensor probed
Couldn't find a device for node '/clocks/mstp3_clks at e615013c'
Couldn't find a device for node '/clocks/mstp3_clks at e615013c'
sh_mobile_sdhi ee100000.sd: Got CD GPIO
sh_mobile_sdhi ee100000.sd: Got WP GPIO
sh_mobile_sdhi ee100000.sd: mmc0 base at 0xee100000 clock rate 97 MHz
Couldn't find a device for node '/clocks/mstp3_clks at e615013c'
Couldn't find a device for node '/clocks/mstp3_clks at e615013c'
sh_mobile_sdhi ee140000.sd: Got CD GPIO
sh_mobile_sdhi ee140000.sd: Got WP GPIO
sh_mobile_sdhi ee140000.sd: mmc1 base at 0xee140000 clock rate 48 MHz
Couldn't find a device for node '/clocks/mstp3_clks at e615013c'
Couldn't find a device for node '/clocks/mstp3_clks at e615013c'
sh_mobile_sdhi ee160000.sd: Got CD GPIO
sh_mobile_sdhi ee160000.sd: mmc2 base at 0xee160000 clock rate 48 MHz
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
Couldn't find a device for node '/clocks/audio_clk_a'
Couldn't find a device for node '/clocks/audio_clk_b'
Couldn't find a device for node '/clocks/audio_clk_c'
Couldn't find a device for node '/clocks/m2_clk'
rcar_sound ec500000.sound: probed
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
Couldn't find a device for node '/clocks/cpg_clocks at e6150000'
Couldn't find a device for node '/clocks/cpg_clocks at e6150000'
cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1300000 KHz
cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1312500 KHz
Registering SWP/SWPB emulation handler
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
rcar-du feb00000.display: failed to initialize DRM/KMS (-517)
Couldn't find a device for node '/clocks/mstp10_clks at e6150998'
asoc-simple-card sound: ak4642-hifi <-> ec500000.sound mapping ok
mmc2: new high speed SDHC card at address b368
mmcblk0: mmc2:b368 SD08G 7.41 GiB 
 mmcblk0: p1
random: nonblocking pool is initialized
i2c-rcar e6530000.i2c: error -110 : 0
i2c-rcar e6530000.i2c: error -16 : 0
i2c-rcar e6530000.i2c: error -16 : 0
i2c-rcar e6530000.i2c: error -16 : 0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
rcar-du feb00000.display: failed to initialize DRM/KMS (-517)
input: keyboard as /devices/platform/keyboard/input/input0
hctosys: unable to open rtc device (rtc0)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
Couldn't find a device for node '/clocks/mstp7_clks at e615014c'
rcar-du feb00000.display: failed to initialize DRM/KMS (-517)
sh-eth ee700000.ethernet eth0: attached PHY 1 (IRQ 408) to driver Micrel KSZ8041RNLI
IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
Sending DHCP requests .
sh-eth ee700000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
., OK
IP-Config: Got DHCP answer from 10.3.3.2, my address is 10.3.3.159
IP-Config: Complete:
     device=eth0, hwaddr=2e:09:0a:00:6d:00, ipaddr=10.3.3.159, mask=255.255.255.0, gw=10.3.3.2
     host=10.3.3.159, domain=isobedori.kobe.vergenet.net kanocho.kobe.vergenet.net vergenet., nis-domain=(none)
     bootserver=10.3.3.135, rootserver=10.3.3.135, rootpath=/srv/nfs/koelsch-armhf,rsize=1024,wsize=1024
     nameserver0=10.3.3.2, nameserver1=8.8.8.8
SDHI0 Vcc: disabling
SDHI0 VccQ: disabling
SDHI1 Vcc: disabling
SDHI1 VccQ: disabling
ALSA device list:
  #0: rsnd-dai.0-ak4642-hifi
VFS: Mounted root (nfs filesystem) on device 0:13.
devtmpfs: mounted
Freeing unused kernel memory: 300K (c063f000 - c068a000)
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevdudevd[921]: starting version 175
.
Synthesizing the initial hotplug events...done.
i2c-rcar e6530000.i2c: error -16 : 0
Waiting for /dev to be fully populated...done.
Activating swap...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux 2.20.1
done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files....
Cleaning up ifupdown....
Setting up networking....
Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/2e:09:0a:00:6d:00
Sending on   LPF/eth0/2e:09:0a:00:6d:00
Sending on   Socket/fallback
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 10.3.3.2
RTNETLINK answers: File exists
bound to 10.3.3.159 -- renewal in 280 seconds.
done.
Cleaning up temporary files....
Setting up ALSA...warning: 'alsactl restore' failed with error message 'No state is present for card rsnddai0ak4642h
Found hardware: "rsnd-dai_0-ak46" "" "" "" ""
Hardware is initialized using a generic method
No state is present for card rsnddai0ak4642h'...i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
i2c-rcar e6530000.i2c: error -16 : 0
amixer: Mixer hw:0 load error: Device or resource busy
done.
Setting kernel variables ...done.
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Starting enhanced syslogd: rsyslogd.
Starting periodic command scheduler: cron.
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd.
---
Testing QSPI performance. Expect 1MB/s or more
dd: opening `/dev/mtd0': No such file or directory
da39a3ee5e6b4b0d3255bfef95601890afd80709  -
---
Testing CPU freq. Expect two or three different frequencies
1500000
1500000
750000
---

Debian GNU/Linux wheezy/sid debian ttySC0

debian login: 

             reply	other threads:[~2015-10-26  3:20 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-26  3:20 Simon Horman [this message]
2015-10-26  3:20 ` Possible Regression due to c074fef5d36e ("of/platform: Defer probes of registered devices") Simon Horman
2015-10-26  8:18 ` Geert Uytterhoeven
2015-10-26  8:18   ` Geert Uytterhoeven
2015-10-26  9:40 ` Sylvain Rochet
2015-10-26  9:40   ` Sylvain Rochet
2015-10-26  9:56   ` Geert Uytterhoeven
2015-10-26  9:56     ` Geert Uytterhoeven
2015-10-26 10:41     ` Russell King - ARM Linux
2015-10-26 10:41       ` Russell King - ARM Linux
2015-10-26 11:02       ` Geert Uytterhoeven
2015-10-26 11:02         ` Geert Uytterhoeven
2015-10-26 12:47         ` Tomeu Vizoso
2015-10-26 12:47           ` Tomeu Vizoso
2015-10-26 13:23           ` Russell King - ARM Linux
2015-10-26 13:23             ` Russell King - ARM Linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151026032039.GA1950@verge.net.au \
    --to=horms@verge.net.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.