* [PATCH v3 1/5] stmmac: replace all pr_xxx by their netdev_xxx counterpart
2015-11-05 8:30 [PATCH v3] stmmac: improve logging LABBE Corentin
@ 2015-11-05 8:30 ` LABBE Corentin
2015-11-05 10:58 ` kbuild test robot
2015-11-05 8:30 ` [PATCH v3 2/5] stmmac: replace hardcoded function name by __func__ LABBE Corentin
` (3 subsequent siblings)
4 siblings, 1 reply; 8+ messages in thread
From: LABBE Corentin @ 2015-11-05 8:30 UTC (permalink / raw)
To: peppe.cavallaro; +Cc: netdev, linux-kernel, LABBE Corentin
The stmmac driver use lots of pr_xxx functions to print information.
This is bad since we cannot know which device logs the information.
(moreover if two stmmac device are present)
Furthermore, it seems that it assumes wrongly that all logs will always
be subsequent by using a dev_xxx then some indented pr_xxx like this:
kernel: sun7i-dwmac 1c50000.ethernet: no reset control found
kernel: Ring mode enabled
kernel: No HW DMA feature register supported
kernel: Normal descriptors
kernel: TX Checksum insertion supported
So this patch replace all pr_xxx by their netdev_xxx counterpart.
Excepts for some printing where netdev "cause" unpretty output like:
sun7i-dwmac 1c50000.ethernet (unnamed net_device) (uninitialized): no reset control found
In those case, I keep dev_xxx.
In the same time I remove some "stmmac:" print since
this will be a duplicate with that dev_xxx displays.
And this patch also change some pr_info by netdev_err when
the word ERROR is printed.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 210 ++++++++++++----------
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 14 +-
2 files changed, 123 insertions(+), 101 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 64d8aa4..a4788c5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -298,7 +298,7 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
*/
spin_lock_irqsave(&priv->lock, flags);
if (priv->eee_active) {
- pr_debug("stmmac: disable EEE\n");
+ netdev_dbg(priv->dev, "disable EEE\n");
del_timer_sync(&priv->eee_ctrl_timer);
priv->hw->mac->set_eee_timer(priv->hw, 0,
tx_lpi_timer);
@@ -327,7 +327,7 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
ret = true;
spin_unlock_irqrestore(&priv->lock, flags);
- pr_debug("stmmac: Energy-Efficient Ethernet initialized\n");
+ netdev_dbg(priv->dev, "Energy-Efficient Ethernet initialized\n");
}
out:
return ret;
@@ -448,8 +448,8 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
sizeof(struct hwtstamp_config)))
return -EFAULT;
- pr_debug("%s config flags:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
- __func__, config.flags, config.tx_type, config.rx_filter);
+ netdev_dbg(priv->dev, "%s config flags:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
+ __func__, config.flags, config.tx_type, config.rx_filter);
/* reserved for future extensions */
if (config.flags)
@@ -659,10 +659,10 @@ static int stmmac_init_ptp(struct stmmac_priv *priv)
priv->adv_ts = 1;
if (netif_msg_hw(priv) && priv->dma_cap.time_stamp)
- pr_debug("IEEE 1588-2002 Time Stamp supported\n");
+ netdev_dbg(priv->dev, "IEEE 1588-2002 Time Stamp supported\n");
if (netif_msg_hw(priv) && priv->adv_ts)
- pr_debug("IEEE 1588-2008 Advanced Time Stamp supported\n");
+ netdev_dbg(priv->dev, "IEEE 1588-2008 Advanced Time Stamp supported\n");
priv->hw->ptp = &stmmac_ptp;
priv->hwts_tx_en = 0;
@@ -742,8 +742,9 @@ static void stmmac_adjust_link(struct net_device *dev)
break;
default:
if (netif_msg_link(priv))
- pr_warn("%s: Speed (%d) not 10/100\n",
- dev->name, phydev->speed);
+ netdev_warn(priv->dev,
+ "Speed (%d) not 10/100\n",
+ phydev->speed);
break;
}
@@ -790,10 +791,10 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
(interface == PHY_INTERFACE_MODE_RGMII_ID) ||
(interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
(interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
- pr_debug("STMMAC: PCS RGMII support enable\n");
+ netdev_dbg(priv->dev, "PCS RGMII support enabled\n");
priv->pcs = STMMAC_PCS_RGMII;
} else if (interface == PHY_INTERFACE_MODE_SGMII) {
- pr_debug("STMMAC: PCS SGMII support enable\n");
+ netdev_dbg(priv->dev, "PCS SGMII support enabled\n");
priv->pcs = STMMAC_PCS_SGMII;
}
}
@@ -832,15 +833,15 @@ static int stmmac_init_phy(struct net_device *dev)
snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
priv->plat->phy_addr);
- pr_debug("stmmac_init_phy: trying to attach to %s\n",
- phy_id_fmt);
+ netdev_dbg(priv->dev, "stmmac_init_phy: trying to attach to %s\n",
+ phy_id_fmt);
phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link,
interface);
}
if (IS_ERR_OR_NULL(phydev)) {
- pr_err("%s: Could not attach to PHY\n", dev->name);
+ netdev_err(priv->dev, "Could not attach to PHY\n");
if (!phydev)
return -ENODEV;
@@ -865,8 +866,8 @@ static int stmmac_init_phy(struct net_device *dev)
phy_disconnect(phydev);
return -ENODEV;
}
- pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)"
- " Link = %d\n", dev->name, phydev->phy_id, phydev->link);
+ netdev_dbg(priv->dev, "stmmac_init_phy: attached to PHY (UID 0x%x) Link = %d\n",
+ phydev->phy_id, phydev->link);
priv->phydev = phydev;
@@ -913,14 +914,14 @@ static void stmmac_display_rings(struct stmmac_priv *priv)
unsigned int rxsize = priv->dma_rx_size;
if (priv->extend_desc) {
- pr_info("Extended RX descriptor ring:\n");
+ netdev_info(priv->dev, "Extended RX descriptor ring:\n");
stmmac_display_ring((void *)priv->dma_erx, rxsize, 1);
- pr_info("Extended TX descriptor ring:\n");
+ netdev_info(priv->dev, "Extended TX descriptor ring:\n");
stmmac_display_ring((void *)priv->dma_etx, txsize, 1);
} else {
- pr_info("RX descriptor ring:\n");
+ netdev_info(priv->dev, "RX descriptor ring:\n");
stmmac_display_ring((void *)priv->dma_rx, rxsize, 0);
- pr_info("TX descriptor ring:\n");
+ netdev_info(priv->dev, "TX descriptor ring:\n");
stmmac_display_ring((void *)priv->dma_tx, txsize, 0);
}
}
@@ -990,7 +991,8 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
skb = __netdev_alloc_skb_ip_align(priv->dev, priv->dma_buf_sz, flags);
if (!skb) {
- pr_err("%s: Rx init fails; skb is NULL\n", __func__);
+ netdev_err(priv->dev,
+ "%s: Rx init fails; skb is NULL\n", __func__);
return -ENOMEM;
}
priv->rx_skbuff[i] = skb;
@@ -998,7 +1000,7 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
priv->dma_buf_sz,
DMA_FROM_DEVICE);
if (dma_mapping_error(priv->device, priv->rx_skbuff_dma[i])) {
- pr_err("%s: DMA mapping error\n", __func__);
+ netdev_err(priv->dev, "%s: DMA mapping error\n", __func__);
dev_kfree_skb_any(skb);
return -EINVAL;
}
@@ -1048,15 +1050,16 @@ static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
priv->dma_buf_sz = bfsize;
if (netif_msg_probe(priv))
- pr_debug("%s: txsize %d, rxsize %d, bfsize %d\n", __func__,
- txsize, rxsize, bfsize);
+ netdev_dbg(priv->dev, "%s: txsize %d, rxsize %d, bfsize %d\n",
+ __func__, txsize, rxsize, bfsize);
if (netif_msg_probe(priv)) {
- pr_debug("(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n", __func__,
- (u32) priv->dma_rx_phy, (u32) priv->dma_tx_phy);
+ netdev_dbg(priv->dev, "(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n",
+ __func__, (u32)priv->dma_rx_phy,
+ (u32)priv->dma_tx_phy);
/* RX INITIALIZATION */
- pr_debug("\tSKB addresses:\nskb\t\tskb data\tdma data\n");
+ netdev_dbg(priv->dev, "SKB addresses:\nskb\t\tskb data\tdma data\n");
}
for (i = 0; i < rxsize; i++) {
struct dma_desc *p;
@@ -1070,7 +1073,8 @@ static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
goto err_init_rx_buffers;
if (netif_msg_probe(priv))
- pr_debug("[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i],
+ netdev_dbg(priv->dev, "[%p]\t[%p]\t[%x]\n",
+ priv->rx_skbuff[i],
priv->rx_skbuff[i]->data,
(unsigned int)priv->rx_skbuff_dma[i]);
}
@@ -1353,8 +1357,8 @@ static void stmmac_tx_clean(struct stmmac_priv *priv)
stmmac_get_tx_hwtstamp(priv, entry, skb);
}
if (netif_msg_tx_done(priv))
- pr_debug("%s: curr %d, dirty %d\n", __func__,
- priv->cur_tx, priv->dirty_tx);
+ netdev_dbg(priv->dev, "%s: curr %d, dirty %d\n",
+ __func__, priv->cur_tx, priv->dirty_tx);
if (likely(priv->tx_skbuff_dma[entry].buf)) {
if (priv->tx_skbuff_dma[entry].map_as_page)
@@ -1392,7 +1396,8 @@ static void stmmac_tx_clean(struct stmmac_priv *priv)
if (netif_queue_stopped(priv->dev) &&
stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) {
if (netif_msg_tx_done(priv))
- pr_debug("%s: restart transmit\n", __func__);
+ netdev_dbg(priv->dev, "%s: restart transmit\n",
+ __func__);
netif_wake_queue(priv->dev);
}
netif_tx_unlock(priv->dev);
@@ -1499,7 +1504,7 @@ static void stmmac_mmc_setup(struct stmmac_priv *priv)
dwmac_mmc_ctrl(priv->ioaddr, mode);
memset(&priv->mmc, 0, sizeof(struct stmmac_counters));
} else
- pr_info(" No MAC Management Counters available\n");
+ netdev_info(priv->dev, "No MAC Management Counters available\n");
}
/**
@@ -1517,8 +1522,8 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv)
u32 uid = ((hwid & 0x0000ff00) >> 8);
u32 synid = (hwid & 0x000000ff);
- pr_info("stmmac - user ID: 0x%x, Synopsys ID: 0x%x\n",
- uid, synid);
+ netdev_info(priv->dev, "user ID: 0x%x, Synopsys ID: 0x%x\n",
+ uid, synid);
return synid;
}
@@ -1535,18 +1540,18 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv)
static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
{
if (priv->plat->enh_desc) {
- pr_info(" Enhanced/Alternate descriptors\n");
+ dev_info(priv->device, "Enhanced/Alternate descriptors\n");
/* GMAC older than 3.50 has no extended descriptors */
if (priv->synopsys_id >= DWMAC_CORE_3_50) {
- pr_info("\tEnabled extended descriptors\n");
+ dev_info(priv->device, "Enabled extended descriptors\n");
priv->extend_desc = 1;
} else
- pr_warn("Extended descriptors not supported\n");
+ dev_warn(priv->device, "Extended descriptors not supported\n");
priv->hw->desc = &enh_desc_ops;
} else {
- pr_info(" Normal descriptors\n");
+ dev_info(priv->device, "Normal descriptors\n");
priv->hw->desc = &ndesc_ops;
}
}
@@ -1623,8 +1628,8 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv)
priv->dev->dev_addr, 0);
if (!is_valid_ether_addr(priv->dev->dev_addr))
eth_hw_addr_random(priv->dev);
- pr_info("%s: device MAC address %pM\n", priv->dev->name,
- priv->dev->dev_addr);
+ netdev_info(priv->dev, "device MAC address %pM\n",
+ priv->dev->dev_addr);
}
}
@@ -1709,7 +1714,8 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
/* DMA initialization and SW reset */
ret = stmmac_init_dma_engine(priv);
if (ret < 0) {
- pr_err("%s: DMA engine initialization failed\n", __func__);
+ netdev_err(priv->dev, "%s: DMA engine initialization failed\n",
+ __func__);
return ret;
}
@@ -1725,7 +1731,7 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
ret = priv->hw->mac->rx_ipc(priv->hw);
if (!ret) {
- pr_warn(" RX IPC Checksum Offload disabled\n");
+ netdev_warn(priv->dev, "RX IPC Checksum Offload disabled\n");
priv->plat->rx_coe = STMMAC_RX_COE_NONE;
priv->hw->rx_csum = 0;
}
@@ -1741,16 +1747,18 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
if (init_ptp) {
ret = stmmac_init_ptp(priv);
if (ret && ret != -EOPNOTSUPP)
- pr_warn("%s: failed PTP initialisation\n", __func__);
+ netdev_warn(priv->dev, "%s: failed PTP initialisation\n",
+ __func__);
}
#ifdef CONFIG_DEBUG_FS
ret = stmmac_init_fs(dev);
if (ret < 0)
- pr_warn("%s: failed debugFS registration\n", __func__);
+ netdev_warn(priv->dev, "%s: failed debugFS registration\n",
+ __func__);
#endif
/* Start the ball rolling... */
- pr_debug("%s: DMA RX/TX processes started...\n", dev->name);
+ netdev_dbg(priv->dev, "DMA RX/TX processes started...\n");
priv->hw->dma->start_tx(priv->ioaddr);
priv->hw->dma->start_rx(priv->ioaddr);
@@ -1792,8 +1800,9 @@ static int stmmac_open(struct net_device *dev)
priv->pcs != STMMAC_PCS_RTBI) {
ret = stmmac_init_phy(dev);
if (ret) {
- pr_err("%s: Cannot attach to PHY (error: %d)\n",
- __func__, ret);
+ netdev_err(priv->dev,
+ "%s: Cannot attach to PHY (error: %d)\n",
+ __func__, ret);
return ret;
}
}
@@ -1809,19 +1818,21 @@ static int stmmac_open(struct net_device *dev)
ret = alloc_dma_desc_resources(priv);
if (ret < 0) {
- pr_err("%s: DMA descriptors allocation failed\n", __func__);
+ netdev_err(priv->dev, "%s: DMA descriptors allocation failed\n"
+ __func__);
goto dma_desc_error;
}
ret = init_dma_desc_rings(dev, GFP_KERNEL);
if (ret < 0) {
- pr_err("%s: DMA descriptors initialization failed\n", __func__);
+ netdev_err(priv->dev, "%s: DMA descriptors initialization failed\n",
+ __func__);
goto init_error;
}
ret = stmmac_hw_setup(dev, true);
if (ret < 0) {
- pr_err("%s: Hw setup failed\n", __func__);
+ netdev_err(priv->dev, "%s: Hw setup failed\n", __func__);
goto init_error;
}
@@ -1834,8 +1845,9 @@ static int stmmac_open(struct net_device *dev)
ret = request_irq(dev->irq, stmmac_interrupt,
IRQF_SHARED, dev->name, dev);
if (unlikely(ret < 0)) {
- pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n",
- __func__, dev->irq, ret);
+ netdev_err(priv->dev,
+ "%s: ERROR: allocating the IRQ %d (error: %d)\n",
+ __func__, dev->irq, ret);
goto init_error;
}
@@ -1844,8 +1856,9 @@ static int stmmac_open(struct net_device *dev)
ret = request_irq(priv->wol_irq, stmmac_interrupt,
IRQF_SHARED, dev->name, dev);
if (unlikely(ret < 0)) {
- pr_err("%s: ERROR: allocating the WoL IRQ %d (%d)\n",
- __func__, priv->wol_irq, ret);
+ netdev_err(priv->dev,
+ "%s: ERROR: allocating the WoL IRQ %d (%d)\n",
+ __func__, priv->wol_irq, ret);
goto wolirq_error;
}
}
@@ -1855,8 +1868,9 @@ static int stmmac_open(struct net_device *dev)
ret = request_irq(priv->lpi_irq, stmmac_interrupt, IRQF_SHARED,
dev->name, dev);
if (unlikely(ret < 0)) {
- pr_err("%s: ERROR: allocating the LPI IRQ %d (%d)\n",
- __func__, priv->lpi_irq, ret);
+ netdev_err(priv->dev,
+ "%s: ERROR: allocating the LPI IRQ %d (%d)\n",
+ __func__, priv->lpi_irq, ret);
goto lpiirq_error;
}
}
@@ -1961,7 +1975,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
if (!netif_queue_stopped(dev)) {
netif_stop_queue(dev);
/* This is a hard error, log it. */
- pr_err("%s: Tx Ring full when queue awake\n", __func__);
+ netdev_err(priv->dev,
+ "%s: Tx Ring full when queue awake\n",
+ __func__);
}
return NETDEV_TX_BUSY;
}
@@ -2050,8 +2066,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
priv->cur_tx++;
if (netif_msg_pktdata(priv)) {
- pr_debug("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d",
- __func__, (priv->cur_tx % txsize),
+ netdev_dbg(priv->dev,
+ "%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d",
+ __func__, (priv->cur_tx % txsize),
(priv->dirty_tx % txsize), entry, first, nfrags);
if (priv->extend_desc)
@@ -2059,12 +2076,13 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
else
stmmac_display_ring((void *)priv->dma_tx, txsize, 0);
- pr_debug(">>> frame to be transmitted: ");
+ netdev_dbg(priv->dev, ">>> frame to be transmitted: ");
print_pkt(skb->data, skb->len);
}
if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) {
if (netif_msg_hw(priv))
- pr_debug("%s: stop transmitted packets\n", __func__);
+ netdev_dbg(priv->dev,
+ "%s: stop transmitted packets\n", __func__);
netif_stop_queue(dev);
}
@@ -2088,7 +2106,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
dma_map_err:
spin_unlock(&priv->tx_lock);
- dev_err(priv->device, "Tx dma map failed\n");
+ netdev_err(priv->dev, "Tx DMA map failed\n");
dev_kfree_skb(skb);
priv->dev->stats.tx_dropped++;
return NETDEV_TX_OK;
@@ -2145,7 +2163,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv)
DMA_FROM_DEVICE);
if (dma_mapping_error(priv->device,
priv->rx_skbuff_dma[entry])) {
- dev_err(priv->device, "Rx dma map failed\n");
+ netdev_err(priv->dev, "Rx DMA map failed\n");
dev_kfree_skb(skb);
break;
}
@@ -2154,7 +2172,8 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv)
priv->hw->mode->refill_desc3(priv, p);
if (netif_msg_rx_status(priv))
- pr_debug("\trefill entry #%d\n", entry);
+ netdev_dbg(priv->dev,
+ "refill entry #%d\n", entry);
}
wmb();
priv->hw->desc->set_rx_owner(p);
@@ -2178,7 +2197,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
int coe = priv->hw->rx_csum;
if (netif_msg_rx_status(priv)) {
- pr_debug("%s: descriptor ring:\n", __func__);
+ netdev_dbg(priv->dev, "%s: descriptor ring:\n", __func__);
if (priv->extend_desc)
stmmac_display_ring((void *)priv->dma_erx, rxsize, 1);
else
@@ -2239,16 +2258,16 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
frame_len -= ETH_FCS_LEN;
if (netif_msg_rx_status(priv)) {
- pr_debug("\tdesc: %p [entry %d] buff=0x%x\n",
- p, entry, p->des2);
+ netdev_dbg(priv->dev, "desc: %p [entry %d] buff=0x%x\n",
+ p, entry, p->des2);
if (frame_len > ETH_FRAME_LEN)
- pr_debug("\tframe size %d, COE: %d\n",
- frame_len, status);
+ netdev_dbg(priv->dev, "frame size %d, COE: %d\n",
+ frame_len, status);
}
skb = priv->rx_skbuff[entry];
if (unlikely(!skb)) {
- pr_err("%s: Inconsistent Rx descriptor chain\n",
- priv->dev->name);
+ netdev_err(priv->dev,
+ "Inconsistent Rx descriptor chain\n");
priv->dev->stats.rx_dropped++;
break;
}
@@ -2263,7 +2282,8 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
priv->dma_buf_sz, DMA_FROM_DEVICE);
if (netif_msg_pktdata(priv)) {
- pr_debug("frame received (%dbytes)", frame_len);
+ netdev_dbg(priv->dev, "frame received (%dbytes)",
+ frame_len);
print_pkt(skb->data, frame_len);
}
@@ -2364,7 +2384,7 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
int max_mtu;
if (netif_running(dev)) {
- pr_err("%s: must be stopped to change its MTU\n", dev->name);
+ netdev_err(priv->dev, "must be stopped to change the MTU\n");
return -EBUSY;
}
@@ -2377,7 +2397,7 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
max_mtu = priv->plat->maxmtu;
if ((new_mtu < 46) || (new_mtu > max_mtu)) {
- pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu);
+ netdev_err(priv->dev, "invalid MTU, max MTU is: %d\n", max_mtu);
return -EINVAL;
}
@@ -2447,7 +2467,7 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
pm_wakeup_event(priv->device, 0);
if (unlikely(!dev)) {
- pr_err("%s: invalid dev pointer\n", __func__);
+ netdev_err(priv->dev, "%s: invalid dev pointer\n", __func__);
return IRQ_NONE;
}
@@ -2663,8 +2683,7 @@ static int stmmac_init_fs(struct net_device *dev)
priv->dbgfs_dir = debugfs_create_dir(dev->name, stmmac_fs_dir);
if (!priv->dbgfs_dir || IS_ERR(priv->dbgfs_dir)) {
- pr_err("ERROR %s/%s, debugfs create directory failed\n",
- STMMAC_RESOURCE_NAME, dev->name);
+ netdev_err(priv->dev, "ERROR failed to create debugfs directory\n");
return -ENOMEM;
}
@@ -2676,7 +2695,7 @@ static int stmmac_init_fs(struct net_device *dev)
&stmmac_rings_status_fops);
if (!priv->dbgfs_rings_status || IS_ERR(priv->dbgfs_rings_status)) {
- pr_info("ERROR creating stmmac ring debugfs file\n");
+ netdev_err(priv->dev, "ERROR creating stmmac ring debugfs file\n");
debugfs_remove_recursive(priv->dbgfs_dir);
return -ENOMEM;
@@ -2688,7 +2707,7 @@ static int stmmac_init_fs(struct net_device *dev)
dev, &stmmac_dma_cap_fops);
if (!priv->dbgfs_dma_cap || IS_ERR(priv->dbgfs_dma_cap)) {
- pr_info("ERROR creating stmmac MMC debugfs file\n");
+ netdev_err(priv->dev, "ERROR creating stmmac MMC debugfs file\n");
debugfs_remove_recursive(priv->dbgfs_dir);
return -ENOMEM;
@@ -2753,18 +2772,18 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
/* To use the chained or ring mode */
if (chain_mode) {
priv->hw->mode = &chain_mode_ops;
- pr_info(" Chain mode enabled\n");
+ dev_info(priv->device, "Chain mode enabled\n");
priv->mode = STMMAC_CHAIN_MODE;
} else {
priv->hw->mode = &ring_mode_ops;
- pr_info(" Ring mode enabled\n");
+ dev_info(priv->device, "Ring mode enabled\n");
priv->mode = STMMAC_RING_MODE;
}
/* Get the HW capability (new GMAC newer than 3.50a) */
priv->hw_cap_support = stmmac_get_hw_features(priv);
if (priv->hw_cap_support) {
- pr_info(" DMA HW capability register supported");
+ dev_info(priv->device, "DMA HW capability register supported\n");
/* We can override some gmac/dma configuration fields: e.g.
* enh_desc, tx_coe (e.g. that are passed through the
@@ -2785,22 +2804,23 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
else if (priv->dma_cap.rx_coe_type1)
priv->plat->rx_coe = STMMAC_RX_COE_TYPE1;
- } else
- pr_info(" No HW DMA feature register supported");
+ } else {
+ dev_info(priv->device, "No HW DMA feature register supported\n");
+ }
/* To use alternate (extended) or normal descriptor structures */
stmmac_selec_desc_mode(priv);
if (priv->plat->rx_coe) {
priv->hw->rx_csum = priv->plat->rx_coe;
- pr_info(" RX Checksum Offload Engine supported (type %d)\n",
- priv->plat->rx_coe);
+ dev_info(priv->device, "RX Checksum Offload Engine supported (type %d)\n",
+ priv->plat->rx_coe);
}
if (priv->plat->tx_coe)
- pr_info(" TX Checksum insertion supported\n");
+ dev_info(priv->device, "TX Checksum insertion supported\n");
if (priv->plat->pmt) {
- pr_info(" Wake-Up On Lan supported\n");
+ dev_info(priv->device, "Wake-Up On Lan supported\n");
device_set_wakeup_capable(priv->device, 1);
}
@@ -2861,8 +2881,8 @@ int stmmac_dvr_probe(struct device *device,
priv->stmmac_clk = devm_clk_get(priv->device, STMMAC_RESOURCE_NAME);
if (IS_ERR(priv->stmmac_clk)) {
- dev_warn(priv->device, "%s: warning: cannot get CSR clock\n",
- __func__);
+ netdev_warn(priv->dev, "%s: warning: cannot get CSR clock\n",
+ __func__);
/* If failed to obtain stmmac_clk and specific clk_csr value
* is NOT passed from the platform, probe fail.
*/
@@ -2925,7 +2945,7 @@ int stmmac_dvr_probe(struct device *device,
*/
if ((priv->synopsys_id >= DWMAC_CORE_3_50) && (!priv->plat->riwt_off)) {
priv->use_riwt = 1;
- pr_info(" Enable RX Mitigation via HW Watchdog Timer\n");
+ netdev_info(priv->dev, "Enable RX Mitigation via HW Watchdog Timer\n");
}
netif_napi_add(ndev, &priv->napi, stmmac_poll, 64);
@@ -2935,7 +2955,8 @@ int stmmac_dvr_probe(struct device *device,
ret = register_netdev(ndev);
if (ret) {
- pr_err("%s: ERROR %i registering the device\n", __func__, ret);
+ netdev_err(priv->dev, "%s: ERROR %i registering the device\n",
+ __func__, ret);
goto error_netdev_register;
}
@@ -2957,8 +2978,9 @@ int stmmac_dvr_probe(struct device *device,
/* MDIO bus Registration */
ret = stmmac_mdio_register(ndev);
if (ret < 0) {
- pr_debug("%s: MDIO bus (id: %d) registration failed",
- __func__, priv->plat->bus_id);
+ netdev_err(priv->dev,
+ "%s: MDIO bus (id: %d) registration failed",
+ __func__, priv->plat->bus_id);
goto error_mdio_register;
}
}
@@ -2990,7 +3012,7 @@ int stmmac_dvr_remove(struct net_device *ndev)
{
struct stmmac_priv *priv = netdev_priv(ndev);
- pr_info("%s:\n\tremoving driver", __func__);
+ netdev_info(priv->dev, "%s: removing driver", __func__);
priv->hw->dma->stop_rx(priv->ioaddr);
priv->hw->dma->stop_tx(priv->ioaddr);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index ebf6abc..41cfdae 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -176,7 +176,7 @@ int stmmac_mdio_reset(struct mii_bus *bus)
#endif
if (data->phy_reset) {
- pr_debug("stmmac_mdio_reset: calling phy_reset\n");
+ netdev_dbg(ndev, "stmmac_mdio_reset: calling phy_reset\n");
data->phy_reset(priv->plat->bsp_priv);
}
@@ -235,7 +235,7 @@ int stmmac_mdio_register(struct net_device *ndev)
new_bus->parent = priv->device;
err = mdiobus_register(new_bus);
if (err != 0) {
- pr_err("%s: Cannot register as MDIO bus\n", new_bus->name);
+ netdev_err(ndev, "Cannot register the MDIO bus\n");
goto bus_register_fail;
}
@@ -278,16 +278,16 @@ int stmmac_mdio_register(struct net_device *ndev)
irq_str = irq_num;
break;
}
- pr_info("%s: PHY ID %08x at %d IRQ %s (%s)%s\n",
- ndev->name, phydev->phy_id, addr,
- irq_str, dev_name(&phydev->dev),
- act ? " active" : "");
+ netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
+ phydev->phy_id, addr,
+ irq_str, dev_name(&phydev->dev),
+ act ? " active" : "");
found = 1;
}
}
if (!found) {
- pr_warn("%s: No PHY found\n", ndev->name);
+ netdev_warn(ndev, "No PHY found\n");
mdiobus_unregister(new_bus);
mdiobus_free(new_bus);
return -ENODEV;
--
2.4.10
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH v3 1/5] stmmac: replace all pr_xxx by their netdev_xxx counterpart
2015-11-05 8:30 ` [PATCH v3 1/5] stmmac: replace all pr_xxx by their netdev_xxx counterpart LABBE Corentin
@ 2015-11-05 10:58 ` kbuild test robot
2015-11-05 12:29 ` LABBE Corentin
0 siblings, 1 reply; 8+ messages in thread
From: kbuild test robot @ 2015-11-05 10:58 UTC (permalink / raw)
To: LABBE Corentin
Cc: kbuild-all, peppe.cavallaro, netdev, linux-kernel, LABBE Corentin
[-- Attachment #1: Type: text/plain, Size: 1680 bytes --]
Hi LABBE,
[auto build test ERROR on: net/master]
[also build test ERROR on: v4.3 next-20151105]
url: https://github.com/0day-ci/linux/commits/LABBE-Corentin/stmmac-replace-all-pr_xxx-by-their-netdev_xxx-counterpart/20151105-163344
config: m68k-allyesconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=m68k
Note: the linux-review/LABBE-Corentin/stmmac-replace-all-pr_xxx-by-their-netdev_xxx-counterpart/20151105-163344 HEAD 6d5b68276276235c73d865a816807f6073f341e9 builds fine.
It only hurts bisectibility.
All error/warnings (new ones prefixed by >>):
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function 'stmmac_open':
>> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1822:7: error: expected ')' before '__func__'
__func__);
^
>> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1822:7: warning: format '%s' expects a matching 'char *' argument [-Wformat=]
vim +1822 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
1816 priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
1817 priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
1818
1819 ret = alloc_dma_desc_resources(priv);
1820 if (ret < 0) {
1821 netdev_err(priv->dev, "%s: DMA descriptors allocation failed\n"
> 1822 __func__);
1823 goto dma_desc_error;
1824 }
1825
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 34723 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH v3 1/5] stmmac: replace all pr_xxx by their netdev_xxx counterpart
2015-11-05 10:58 ` kbuild test robot
@ 2015-11-05 12:29 ` LABBE Corentin
0 siblings, 0 replies; 8+ messages in thread
From: LABBE Corentin @ 2015-11-05 12:29 UTC (permalink / raw)
To: kbuild test robot; +Cc: kbuild-all, peppe.cavallaro, netdev, linux-kernel
On Thu, Nov 05, 2015 at 06:58:17PM +0800, kbuild test robot wrote:
> Hi LABBE,
>
> [auto build test ERROR on: net/master]
> [also build test ERROR on: v4.3 next-20151105]
>
> url: https://github.com/0day-ci/linux/commits/LABBE-Corentin/stmmac-replace-all-pr_xxx-by-their-netdev_xxx-counterpart/20151105-163344
> config: m68k-allyesconfig (attached as .config)
> reproduce:
> wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # save the attached .config to linux build tree
> make.cross ARCH=m68k
>
> Note: the linux-review/LABBE-Corentin/stmmac-replace-all-pr_xxx-by-their-netdev_xxx-counterpart/20151105-163344 HEAD 6d5b68276276235c73d865a816807f6073f341e9 builds fine.
> It only hurts bisectibility.
>
> All error/warnings (new ones prefixed by >>):
>
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function 'stmmac_open':
> >> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1822:7: error: expected ')' before '__func__'
> __func__);
> ^
> >> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1822:7: warning: format '%s' expects a matching 'char *' argument [-Wformat=]
>
> vim +1822 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>
> 1816 priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
> 1817 priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
> 1818
> 1819 ret = alloc_dma_desc_resources(priv);
> 1820 if (ret < 0) {
> 1821 netdev_err(priv->dev, "%s: DMA descriptors allocation failed\n"
> > 1822 __func__);
> 1823 goto dma_desc_error;
> 1824 }
> 1825
>
> ---
> 0-DAY kernel test infrastructure Open Source Technology Center
> https://lists.01.org/pipermail/kbuild-all Intel Corporation
This part is removed by subsequent patch.
I will send a fixed version.
Regards
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v3 2/5] stmmac: replace hardcoded function name by __func__
2015-11-05 8:30 [PATCH v3] stmmac: improve logging LABBE Corentin
2015-11-05 8:30 ` [PATCH v3 1/5] stmmac: replace all pr_xxx by their netdev_xxx counterpart LABBE Corentin
@ 2015-11-05 8:30 ` LABBE Corentin
2015-11-05 8:30 ` [PATCH v3 3/5] stmmac: remove some __func__ printing LABBE Corentin
` (2 subsequent siblings)
4 siblings, 0 replies; 8+ messages in thread
From: LABBE Corentin @ 2015-11-05 8:30 UTC (permalink / raw)
To: peppe.cavallaro; +Cc: netdev, linux-kernel, LABBE Corentin
Some printing have the function name hardcoded.
It is better to use __func__ instead.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index a4788c5..2dc9260 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -833,7 +833,7 @@ static int stmmac_init_phy(struct net_device *dev)
snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
priv->plat->phy_addr);
- netdev_dbg(priv->dev, "stmmac_init_phy: trying to attach to %s\n",
+ netdev_dbg(priv->dev, "%s: trying to attach to %s\n", __func__,
phy_id_fmt);
phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link,
@@ -866,8 +866,8 @@ static int stmmac_init_phy(struct net_device *dev)
phy_disconnect(phydev);
return -ENODEV;
}
- netdev_dbg(priv->dev, "stmmac_init_phy: attached to PHY (UID 0x%x) Link = %d\n",
- phydev->phy_id, phydev->link);
+ netdev_dbg(priv->dev, "%s: attached to PHY (UID 0x%x) Link = %d\n",
+ __func__, phydev->phy_id, phydev->link);
priv->phydev = phydev;
--
2.4.10
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v3 3/5] stmmac: remove some __func__ printing
2015-11-05 8:30 [PATCH v3] stmmac: improve logging LABBE Corentin
2015-11-05 8:30 ` [PATCH v3 1/5] stmmac: replace all pr_xxx by their netdev_xxx counterpart LABBE Corentin
2015-11-05 8:30 ` [PATCH v3 2/5] stmmac: replace hardcoded function name by __func__ LABBE Corentin
@ 2015-11-05 8:30 ` LABBE Corentin
2015-11-05 8:30 ` [PATCH v3 4/5] stmmac: Fix simple style problem LABBE Corentin
2015-11-05 8:30 ` [PATCH v3 5/5] net: stmmac: replace if (netif_msg_type) by their netif_xxx counterpart LABBE Corentin
4 siblings, 0 replies; 8+ messages in thread
From: LABBE Corentin @ 2015-11-05 8:30 UTC (permalink / raw)
To: peppe.cavallaro; +Cc: netdev, linux-kernel, LABBE Corentin
Now that stmmac use netdev_xxx, some __func__ are not necessary since their
use was to clearly identify which driver was logging.
Moreover, as pointed by Joe Perches, using __func__ in xxx_dbg functions
is relatively low value and dynamic debug can add it.
This patch remove __func__ where such printing is useless.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 81 ++++++++++-------------
1 file changed, 34 insertions(+), 47 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 2dc9260..f096416 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -448,8 +448,8 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
sizeof(struct hwtstamp_config)))
return -EFAULT;
- netdev_dbg(priv->dev, "%s config flags:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
- __func__, config.flags, config.tx_type, config.rx_filter);
+ netdev_dbg(priv->dev, "config flags:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
+ config.flags, config.tx_type, config.rx_filter);
/* reserved for future extensions */
if (config.flags)
@@ -833,8 +833,7 @@ static int stmmac_init_phy(struct net_device *dev)
snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
priv->plat->phy_addr);
- netdev_dbg(priv->dev, "%s: trying to attach to %s\n", __func__,
- phy_id_fmt);
+ netdev_dbg(priv->dev, "trying to attach to %s\n", phy_id_fmt);
phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link,
interface);
@@ -991,8 +990,7 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
skb = __netdev_alloc_skb_ip_align(priv->dev, priv->dma_buf_sz, flags);
if (!skb) {
- netdev_err(priv->dev,
- "%s: Rx init fails; skb is NULL\n", __func__);
+ netdev_err(priv->dev, "Rx init fails; skb is NULL\n");
return -ENOMEM;
}
priv->rx_skbuff[i] = skb;
@@ -1000,7 +998,7 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
priv->dma_buf_sz,
DMA_FROM_DEVICE);
if (dma_mapping_error(priv->device, priv->rx_skbuff_dma[i])) {
- netdev_err(priv->dev, "%s: DMA mapping error\n", __func__);
+ netdev_err(priv->dev, "DMA mapping error\n");
dev_kfree_skb_any(skb);
return -EINVAL;
}
@@ -1050,8 +1048,8 @@ static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
priv->dma_buf_sz = bfsize;
if (netif_msg_probe(priv))
- netdev_dbg(priv->dev, "%s: txsize %d, rxsize %d, bfsize %d\n",
- __func__, txsize, rxsize, bfsize);
+ netdev_dbg(priv->dev, "txsize %d, rxsize %d, bfsize %d\n",
+ txsize, rxsize, bfsize);
if (netif_msg_probe(priv)) {
netdev_dbg(priv->dev, "(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n",
@@ -1357,8 +1355,8 @@ static void stmmac_tx_clean(struct stmmac_priv *priv)
stmmac_get_tx_hwtstamp(priv, entry, skb);
}
if (netif_msg_tx_done(priv))
- netdev_dbg(priv->dev, "%s: curr %d, dirty %d\n",
- __func__, priv->cur_tx, priv->dirty_tx);
+ netdev_dbg(priv->dev, "curr %d, dirty %d\n",
+ priv->cur_tx, priv->dirty_tx);
if (likely(priv->tx_skbuff_dma[entry].buf)) {
if (priv->tx_skbuff_dma[entry].map_as_page)
@@ -1396,8 +1394,7 @@ static void stmmac_tx_clean(struct stmmac_priv *priv)
if (netif_queue_stopped(priv->dev) &&
stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) {
if (netif_msg_tx_done(priv))
- netdev_dbg(priv->dev, "%s: restart transmit\n",
- __func__);
+ netdev_dbg(priv->dev, "restart transmit\n");
netif_wake_queue(priv->dev);
}
netif_tx_unlock(priv->dev);
@@ -1714,8 +1711,7 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
/* DMA initialization and SW reset */
ret = stmmac_init_dma_engine(priv);
if (ret < 0) {
- netdev_err(priv->dev, "%s: DMA engine initialization failed\n",
- __func__);
+ netdev_err(priv->dev, "DMA engine initialization failed\n");
return ret;
}
@@ -1747,15 +1743,13 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
if (init_ptp) {
ret = stmmac_init_ptp(priv);
if (ret && ret != -EOPNOTSUPP)
- netdev_warn(priv->dev, "%s: failed PTP initialisation\n",
- __func__);
+ netdev_warn(priv->dev, "failed PTP initialisation\n");
}
#ifdef CONFIG_DEBUG_FS
ret = stmmac_init_fs(dev);
if (ret < 0)
- netdev_warn(priv->dev, "%s: failed debugFS registration\n",
- __func__);
+ netdev_warn(priv->dev, "failed debugFS registration\n");
#endif
/* Start the ball rolling... */
netdev_dbg(priv->dev, "DMA RX/TX processes started...\n");
@@ -1801,8 +1795,7 @@ static int stmmac_open(struct net_device *dev)
ret = stmmac_init_phy(dev);
if (ret) {
netdev_err(priv->dev,
- "%s: Cannot attach to PHY (error: %d)\n",
- __func__, ret);
+ "Cannot attach to PHY (error: %d)\n", ret);
return ret;
}
}
@@ -1818,21 +1811,19 @@ static int stmmac_open(struct net_device *dev)
ret = alloc_dma_desc_resources(priv);
if (ret < 0) {
- netdev_err(priv->dev, "%s: DMA descriptors allocation failed\n"
- __func__);
+ netdev_err(priv->dev, "DMA descriptors allocation failed\n");
goto dma_desc_error;
}
ret = init_dma_desc_rings(dev, GFP_KERNEL);
if (ret < 0) {
- netdev_err(priv->dev, "%s: DMA descriptors initialization failed\n",
- __func__);
+ netdev_err(priv->dev, "DMA descriptors initialization failed\n");
goto init_error;
}
ret = stmmac_hw_setup(dev, true);
if (ret < 0) {
- netdev_err(priv->dev, "%s: Hw setup failed\n", __func__);
+ netdev_err(priv->dev, "Hw setup failed\n");
goto init_error;
}
@@ -1846,8 +1837,8 @@ static int stmmac_open(struct net_device *dev)
IRQF_SHARED, dev->name, dev);
if (unlikely(ret < 0)) {
netdev_err(priv->dev,
- "%s: ERROR: allocating the IRQ %d (error: %d)\n",
- __func__, dev->irq, ret);
+ "ERROR: allocating the IRQ %d (error: %d)\n",
+ dev->irq, ret);
goto init_error;
}
@@ -1857,8 +1848,8 @@ static int stmmac_open(struct net_device *dev)
IRQF_SHARED, dev->name, dev);
if (unlikely(ret < 0)) {
netdev_err(priv->dev,
- "%s: ERROR: allocating the WoL IRQ %d (%d)\n",
- __func__, priv->wol_irq, ret);
+ "ERROR: allocating the WoL IRQ %d (%d)\n",
+ priv->wol_irq, ret);
goto wolirq_error;
}
}
@@ -1869,8 +1860,8 @@ static int stmmac_open(struct net_device *dev)
dev->name, dev);
if (unlikely(ret < 0)) {
netdev_err(priv->dev,
- "%s: ERROR: allocating the LPI IRQ %d (%d)\n",
- __func__, priv->lpi_irq, ret);
+ "ERROR: allocating the LPI IRQ %d (%d)\n",
+ priv->lpi_irq, ret);
goto lpiirq_error;
}
}
@@ -1976,8 +1967,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
netif_stop_queue(dev);
/* This is a hard error, log it. */
netdev_err(priv->dev,
- "%s: Tx Ring full when queue awake\n",
- __func__);
+ "Tx Ring full when queue awake\n");
}
return NETDEV_TX_BUSY;
}
@@ -2067,9 +2057,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
if (netif_msg_pktdata(priv)) {
netdev_dbg(priv->dev,
- "%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d",
- __func__, (priv->cur_tx % txsize),
- (priv->dirty_tx % txsize), entry, first, nfrags);
+ "curr %d dirty=%d entry=%d, first=%p, nfrags=%d",
+ (priv->cur_tx % txsize),
+ (priv->dirty_tx % txsize), entry, first, nfrags);
if (priv->extend_desc)
stmmac_display_ring((void *)priv->dma_etx, txsize, 1);
@@ -2081,8 +2071,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
}
if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) {
if (netif_msg_hw(priv))
- netdev_dbg(priv->dev,
- "%s: stop transmitted packets\n", __func__);
+ netdev_dbg(priv->dev, "stop transmitted packets\n");
netif_stop_queue(dev);
}
@@ -2197,7 +2186,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
int coe = priv->hw->rx_csum;
if (netif_msg_rx_status(priv)) {
- netdev_dbg(priv->dev, "%s: descriptor ring:\n", __func__);
+ netdev_dbg(priv->dev, "descriptor ring:\n");
if (priv->extend_desc)
stmmac_display_ring((void *)priv->dma_erx, rxsize, 1);
else
@@ -2881,8 +2870,7 @@ int stmmac_dvr_probe(struct device *device,
priv->stmmac_clk = devm_clk_get(priv->device, STMMAC_RESOURCE_NAME);
if (IS_ERR(priv->stmmac_clk)) {
- netdev_warn(priv->dev, "%s: warning: cannot get CSR clock\n",
- __func__);
+ netdev_warn(priv->dev, "warning: cannot get CSR clock\n");
/* If failed to obtain stmmac_clk and specific clk_csr value
* is NOT passed from the platform, probe fail.
*/
@@ -2955,8 +2943,7 @@ int stmmac_dvr_probe(struct device *device,
ret = register_netdev(ndev);
if (ret) {
- netdev_err(priv->dev, "%s: ERROR %i registering the device\n",
- __func__, ret);
+ netdev_err(priv->dev, "ERROR %i registering the device\n", ret);
goto error_netdev_register;
}
@@ -2979,8 +2966,8 @@ int stmmac_dvr_probe(struct device *device,
ret = stmmac_mdio_register(ndev);
if (ret < 0) {
netdev_err(priv->dev,
- "%s: MDIO bus (id: %d) registration failed",
- __func__, priv->plat->bus_id);
+ "MDIO bus (id: %d) registration failed",
+ priv->plat->bus_id);
goto error_mdio_register;
}
}
@@ -3012,7 +2999,7 @@ int stmmac_dvr_remove(struct net_device *ndev)
{
struct stmmac_priv *priv = netdev_priv(ndev);
- netdev_info(priv->dev, "%s: removing driver", __func__);
+ netdev_info(priv->dev, "removing driver");
priv->hw->dma->stop_rx(priv->ioaddr);
priv->hw->dma->stop_tx(priv->ioaddr);
--
2.4.10
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v3 4/5] stmmac: Fix simple style problem
2015-11-05 8:30 [PATCH v3] stmmac: improve logging LABBE Corentin
` (2 preceding siblings ...)
2015-11-05 8:30 ` [PATCH v3 3/5] stmmac: remove some __func__ printing LABBE Corentin
@ 2015-11-05 8:30 ` LABBE Corentin
2015-11-05 8:30 ` [PATCH v3 5/5] net: stmmac: replace if (netif_msg_type) by their netif_xxx counterpart LABBE Corentin
4 siblings, 0 replies; 8+ messages in thread
From: LABBE Corentin @ 2015-11-05 8:30 UTC (permalink / raw)
To: peppe.cavallaro; +Cc: netdev, linux-kernel, LABBE Corentin
This patch fix the following warnings:
- braces {} should be used on all arms of this statement
- Prefer seq_puts to seq_printf
- No space is necessary after a cast
- Missing a blank line after declarations
- Please don't use multiple blank lines
- Comparison to NULL could be written
- networking block comments don't use an empty /* line
- Do not include the paragraph about writing to the Free Software
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 71 +++++++++++------------
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 18 +++---
2 files changed, 40 insertions(+), 49 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index f096416..d8adbdb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -13,10 +13,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -197,7 +193,7 @@ static void print_pkt(unsigned char *buf, int len)
}
/* minimum number of free TX descriptors required to wake up TX process */
-#define STMMAC_TX_THRESH(x) (x->dma_tx_size/4)
+#define STMMAC_TX_THRESH(x) (x->dma_tx_size / 4)
static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
{
@@ -207,7 +203,7 @@ static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
/**
* stmmac_hw_fix_mac_speed - callback for speed selection
* @priv: driver private structure
- * Description: on some platforms (e.g. ST), some HW system configuraton
+ * Description: on some platforms (e.g. ST), some HW system configuration
* registers have to be set according to the link speed negotiated.
*/
static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
@@ -371,8 +367,6 @@ static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv,
shhwtstamp.hwtstamp = ns_to_ktime(ns);
/* pass tstamp to stack */
skb_tstamp_tx(skb, &shhwtstamp);
-
- return;
}
/* stmmac_get_rx_hwtstamp - get HW RX timestamps
@@ -615,7 +609,7 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
* 2^x * y == (y << x), hence
* 2^32 * 50000000 ==> (50000000 << 32)
*/
- temp = (u64) (50000000ULL << 32);
+ temp = (u64)(50000000ULL << 32);
priv->default_addend = div_u64(temp, priv->clk_ptp_rate);
priv->hw->ptp->config_addend(priv->ioaddr,
priv->default_addend);
@@ -695,7 +689,7 @@ static void stmmac_adjust_link(struct net_device *dev)
int new_state = 0;
unsigned int fc = priv->flow_ctrl, pause_time = priv->pause;
- if (phydev == NULL)
+ if (!phydev)
return;
spin_lock_irqsave(&priv->lock, flags);
@@ -704,7 +698,8 @@ static void stmmac_adjust_link(struct net_device *dev)
u32 ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
/* Now we make sure that we can be in full duplex mode.
- * If not, we operate in half-duplex mode. */
+ * If not, we operate in half-duplex mode.
+ */
if (phydev->duplex != priv->oldduplex) {
new_state = 1;
if (!(phydev->duplex))
@@ -730,11 +725,10 @@ static void stmmac_adjust_link(struct net_device *dev)
case 10:
if (priv->plat->has_gmac) {
ctrl |= priv->hw->link.port;
- if (phydev->speed == SPEED_100) {
+ if (phydev->speed == SPEED_100)
ctrl |= priv->hw->link.speed;
- } else {
+ else
ctrl &= ~(priv->hw->link.speed);
- }
} else {
ctrl &= ~priv->hw->link.port;
}
@@ -816,6 +810,7 @@ static int stmmac_init_phy(struct net_device *dev)
char bus_id[MII_BUS_ID_SIZE];
int interface = priv->plat->interface;
int max_speed = priv->plat->max_speed;
+
priv->oldlink = 0;
priv->speed = 0;
priv->oldduplex = -1;
@@ -854,8 +849,7 @@ static int stmmac_init_phy(struct net_device *dev)
phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
- /*
- * Broken HW is sometimes missing the pull-up resistor on the
+ /* Broken HW is sometimes missing the pull-up resistor on the
* MDIO line, which results in reads to non-existent devices returning
* 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
* device as well.
@@ -885,18 +879,18 @@ static void stmmac_display_ring(void *head, int size, int extend_desc)
int i;
struct dma_extended_desc *ep = (struct dma_extended_desc *)head;
struct dma_desc *p = (struct dma_desc *)head;
+ u64 x;
for (i = 0; i < size; i++) {
- u64 x;
if (extend_desc) {
- x = *(u64 *) ep;
+ x = *(u64 *)ep;
pr_info("%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
i, (unsigned int)virt_to_phys(ep),
(unsigned int)x, (unsigned int)(x >> 32),
ep->basic.des2, ep->basic.des3);
ep++;
} else {
- x = *(u64 *) p;
+ x = *(u64 *)p;
pr_info("%d [0x%x]: 0x%x 0x%x 0x%x 0x%x",
i, (unsigned int)virt_to_phys(p),
(unsigned int)x, (unsigned int)(x >> 32),
@@ -1061,6 +1055,7 @@ static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
}
for (i = 0; i < rxsize; i++) {
struct dma_desc *p;
+
if (priv->extend_desc)
p = &((priv->dma_erx + i)->basic);
else
@@ -1098,6 +1093,7 @@ static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
/* TX INITIALIZATION */
for (i = 0; i < txsize; i++) {
struct dma_desc *p;
+
if (priv->extend_desc)
p = &((priv->dma_etx + i)->basic);
else
@@ -1157,7 +1153,7 @@ static void dma_free_tx_skbufs(struct stmmac_priv *priv)
DMA_TO_DEVICE);
}
- if (priv->tx_skbuff[i] != NULL) {
+ if (priv->tx_skbuff[i]) {
dev_kfree_skb_any(priv->tx_skbuff[i]);
priv->tx_skbuff[i] = NULL;
priv->tx_skbuff_dma[i].buf = 0;
@@ -1295,8 +1291,7 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
if (priv->plat->force_thresh_dma_mode)
priv->hw->dma->dma_mode(priv->ioaddr, tc, tc, rxfifosz);
else if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) {
- /*
- * In case of GMAC, SF mode can be enabled
+ /* In case of GMAC, SF mode can be enabled
* to perform the TX COE in HW. This depends on:
* 1) TX COE if actually supported
* 2) There is no bugged Jumbo frame support
@@ -1374,7 +1369,7 @@ static void stmmac_tx_clean(struct stmmac_priv *priv)
}
priv->hw->mode->clean_desc3(priv, p);
- if (likely(skb != NULL)) {
+ if (likely(skb)) {
pkts_compl++;
bytes_compl += skb->len;
dev_consume_skb_any(skb);
@@ -1427,6 +1422,7 @@ static void stmmac_tx_err(struct stmmac_priv *priv)
{
int i;
int txsize = priv->dma_tx_size;
+
netif_stop_queue(priv->dev);
priv->hw->dma->stop_tx(priv->ioaddr);
@@ -2117,7 +2113,6 @@ static void stmmac_rx_vlan(struct net_device *dev, struct sk_buff *skb)
}
}
-
/**
* stmmac_rx_refill - refill used skb preallocated buffers
* @priv: driver private structure
@@ -2138,12 +2133,12 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv)
else
p = priv->dma_rx + entry;
- if (likely(priv->rx_skbuff[entry] == NULL)) {
+ if (likely(!priv->rx_skbuff[entry])) {
struct sk_buff *skb;
skb = netdev_alloc_skb_ip_align(priv->dev, bfsize);
- if (unlikely(skb == NULL))
+ if (unlikely(!skb))
break;
priv->rx_skbuff[entry] = skb;
@@ -2535,25 +2530,25 @@ static void sysfs_display_ring(void *head, int size, int extend_desc,
int i;
struct dma_extended_desc *ep = (struct dma_extended_desc *)head;
struct dma_desc *p = (struct dma_desc *)head;
+ u64 x;
for (i = 0; i < size; i++) {
- u64 x;
if (extend_desc) {
- x = *(u64 *) ep;
+ x = *(u64 *)ep;
seq_printf(seq, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
i, (unsigned int)virt_to_phys(ep),
(unsigned int)x, (unsigned int)(x >> 32),
ep->basic.des2, ep->basic.des3);
ep++;
} else {
- x = *(u64 *) p;
+ x = *(u64 *)p;
seq_printf(seq, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
i, (unsigned int)virt_to_phys(ep),
(unsigned int)x, (unsigned int)(x >> 32),
p->des2, p->des3);
p++;
}
- seq_printf(seq, "\n");
+ seq_puts(seq, "\n");
}
}
@@ -2565,14 +2560,14 @@ static int stmmac_sysfs_ring_read(struct seq_file *seq, void *v)
unsigned int rxsize = priv->dma_rx_size;
if (priv->extend_desc) {
- seq_printf(seq, "Extended RX descriptor ring:\n");
+ seq_puts(seq, "Extended RX descriptor ring:\n");
sysfs_display_ring((void *)priv->dma_erx, rxsize, 1, seq);
- seq_printf(seq, "Extended TX descriptor ring:\n");
+ seq_puts(seq, "Extended TX descriptor ring:\n");
sysfs_display_ring((void *)priv->dma_etx, txsize, 1, seq);
} else {
- seq_printf(seq, "RX descriptor ring:\n");
+ seq_puts(seq, "RX descriptor ring:\n");
sysfs_display_ring((void *)priv->dma_rx, rxsize, 0, seq);
- seq_printf(seq, "TX descriptor ring:\n");
+ seq_puts(seq, "TX descriptor ring:\n");
sysfs_display_ring((void *)priv->dma_tx, txsize, 0, seq);
}
@@ -2598,13 +2593,13 @@ static int stmmac_sysfs_dma_cap_read(struct seq_file *seq, void *v)
struct stmmac_priv *priv = netdev_priv(dev);
if (!priv->hw_cap_support) {
- seq_printf(seq, "DMA HW features not supported\n");
+ seq_puts(seq, "DMA HW features not supported\n");
return 0;
}
- seq_printf(seq, "==============================\n");
- seq_printf(seq, "\tDMA HW features\n");
- seq_printf(seq, "==============================\n");
+ seq_puts(seq, "==============================\n");
+ seq_puts(seq, "\tDMA HW features\n");
+ seq_puts(seq, "==============================\n");
seq_printf(seq, "\t10/100 Mbps %s\n",
(priv->dma_cap.mbps_10_100) ? "Y" : "N");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 41cfdae..9699642 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -13,10 +13,6 @@
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
The full GNU General Public License is included in this distribution in
the file called "COPYING".
@@ -30,7 +26,7 @@
#include <linux/of.h>
#include <linux/of_gpio.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include "stmmac.h"
@@ -142,6 +138,7 @@ int stmmac_mdio_reset(struct mii_bus *bus)
if (data->reset_gpio < 0) {
struct device_node *np = priv->device->of_node;
+
if (!np)
return 0;
@@ -207,7 +204,7 @@ int stmmac_mdio_register(struct net_device *ndev)
return 0;
new_bus = mdiobus_alloc();
- if (new_bus == NULL)
+ if (!new_bus)
return -ENOMEM;
if (mdio_bus_data->irqs) {
@@ -242,23 +239,22 @@ int stmmac_mdio_register(struct net_device *ndev)
found = 0;
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
struct phy_device *phydev = new_bus->phy_map[addr];
+
if (phydev) {
int act = 0;
char irq_num[4];
char *irq_str;
- /*
- * If an IRQ was provided to be assigned after
+ /* If an IRQ was provided to be assigned after
* the bus probe, do it here.
*/
- if ((mdio_bus_data->irqs == NULL) &&
+ if ((!mdio_bus_data->irqs) &&
(mdio_bus_data->probed_phy_irq > 0)) {
irqlist[addr] = mdio_bus_data->probed_phy_irq;
phydev->irq = mdio_bus_data->probed_phy_irq;
}
- /*
- * If we're going to bind the MAC to this PHY bus,
+ /* If we're going to bind the MAC to this PHY bus,
* and no PHY number was provided to the MAC,
* use the one probed here.
*/
--
2.4.10
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v3 5/5] net: stmmac: replace if (netif_msg_type) by their netif_xxx counterpart
2015-11-05 8:30 [PATCH v3] stmmac: improve logging LABBE Corentin
` (3 preceding siblings ...)
2015-11-05 8:30 ` [PATCH v3 4/5] stmmac: Fix simple style problem LABBE Corentin
@ 2015-11-05 8:30 ` LABBE Corentin
4 siblings, 0 replies; 8+ messages in thread
From: LABBE Corentin @ 2015-11-05 8:30 UTC (permalink / raw)
To: peppe.cavallaro; +Cc: netdev, linux-kernel, LABBE Corentin
As sugested by Joe Perches, we could replace all
if (netif_msg_type(priv)) dev_xxx(priv->devices, ...)
by the simplier macro netif_xxx(priv, hw, priv->dev, ...)
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 58 ++++++++++-------------
1 file changed, 25 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d8adbdb..2a1aa73 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -652,11 +652,13 @@ static int stmmac_init_ptp(struct stmmac_priv *priv)
if (priv->dma_cap.atime_stamp && priv->extend_desc)
priv->adv_ts = 1;
- if (netif_msg_hw(priv) && priv->dma_cap.time_stamp)
- netdev_dbg(priv->dev, "IEEE 1588-2002 Time Stamp supported\n");
+ if (priv->dma_cap.time_stamp)
+ netif_dbg(priv, hw, priv->dev,
+ "IEEE 1588-2002 Time Stamp supported\n");
- if (netif_msg_hw(priv) && priv->adv_ts)
- netdev_dbg(priv->dev, "IEEE 1588-2008 Advanced Time Stamp supported\n");
+ if (priv->adv_ts)
+ netif_dbg(priv, hw, priv->dev,
+ "IEEE 1588-2008 Advanced Time Stamp supported\n");
priv->hw->ptp = &stmmac_ptp;
priv->hwts_tx_en = 0;
@@ -735,10 +737,9 @@ static void stmmac_adjust_link(struct net_device *dev)
stmmac_hw_fix_mac_speed(priv);
break;
default:
- if (netif_msg_link(priv))
- netdev_warn(priv->dev,
- "Speed (%d) not 10/100\n",
- phydev->speed);
+ netif_warn(priv, link, priv->dev,
+ "Speed (%d) not 10/100\n",
+ phydev->speed);
break;
}
@@ -1041,18 +1042,15 @@ static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
priv->dma_buf_sz = bfsize;
- if (netif_msg_probe(priv))
- netdev_dbg(priv->dev, "txsize %d, rxsize %d, bfsize %d\n",
- txsize, rxsize, bfsize);
+ netif_dbg(priv, probe, priv->dev, "txsize %d, rxsize %d, bfsize %d\n",
+ txsize, rxsize, bfsize);
- if (netif_msg_probe(priv)) {
- netdev_dbg(priv->dev, "(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n",
- __func__, (u32)priv->dma_rx_phy,
- (u32)priv->dma_tx_phy);
+ netif_dbg(priv, probe, priv->dev, "(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n",
+ __func__, (u32)priv->dma_rx_phy, (u32)priv->dma_tx_phy);
+
+ /* RX INITIALIZATION */
+ netif_dbg(priv, probe, priv->dev, "SKB addresses:\nskb\t\tskb data\tdma data\n");
- /* RX INITIALIZATION */
- netdev_dbg(priv->dev, "SKB addresses:\nskb\t\tskb data\tdma data\n");
- }
for (i = 0; i < rxsize; i++) {
struct dma_desc *p;
@@ -1065,11 +1063,9 @@ static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
if (ret)
goto err_init_rx_buffers;
- if (netif_msg_probe(priv))
- netdev_dbg(priv->dev, "[%p]\t[%p]\t[%x]\n",
- priv->rx_skbuff[i],
- priv->rx_skbuff[i]->data,
- (unsigned int)priv->rx_skbuff_dma[i]);
+ netif_dbg(priv, probe, priv->dev, "[%p]\t[%p]\t[%x]\n",
+ priv->rx_skbuff[i], priv->rx_skbuff[i]->data,
+ (unsigned int)priv->rx_skbuff_dma[i]);
}
priv->cur_rx = 0;
priv->dirty_rx = (unsigned int)(i - rxsize);
@@ -1349,9 +1345,8 @@ static void stmmac_tx_clean(struct stmmac_priv *priv)
stmmac_get_tx_hwtstamp(priv, entry, skb);
}
- if (netif_msg_tx_done(priv))
- netdev_dbg(priv->dev, "curr %d, dirty %d\n",
- priv->cur_tx, priv->dirty_tx);
+ netif_dbg(priv, tx_done, priv->dev, "curr %d, dirty %d\n",
+ priv->cur_tx, priv->dirty_tx);
if (likely(priv->tx_skbuff_dma[entry].buf)) {
if (priv->tx_skbuff_dma[entry].map_as_page)
@@ -1388,8 +1383,7 @@ static void stmmac_tx_clean(struct stmmac_priv *priv)
netif_tx_lock(priv->dev);
if (netif_queue_stopped(priv->dev) &&
stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) {
- if (netif_msg_tx_done(priv))
- netdev_dbg(priv->dev, "restart transmit\n");
+ netif_dbg(priv, tx_done, priv->dev, "restart transmit\n");
netif_wake_queue(priv->dev);
}
netif_tx_unlock(priv->dev);
@@ -2066,8 +2060,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
print_pkt(skb->data, skb->len);
}
if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) {
- if (netif_msg_hw(priv))
- netdev_dbg(priv->dev, "stop transmitted packets\n");
+ netif_dbg(priv, hw, priv->dev, "stop transmitted packets\n");
netif_stop_queue(dev);
}
@@ -2155,9 +2148,8 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv)
priv->hw->mode->refill_desc3(priv, p);
- if (netif_msg_rx_status(priv))
- netdev_dbg(priv->dev,
- "refill entry #%d\n", entry);
+ netif_dbg(priv, rx_status, priv->dev,
+ "refill entry #%d\n", entry);
}
wmb();
priv->hw->desc->set_rx_owner(p);
--
2.4.10
^ permalink raw reply related [flat|nested] 8+ messages in thread