From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: Joachim Eastwood <manabian@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>,
linux-pwm@vger.kernel.org,
Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
linux-clk@vger.kernel.org, Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Kamil Debski <k.debski@samsung.com>,
lm-sensors@lm-sensors.org, Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
linux-input@vger.kernel.org, Bryan Wu <cooloney@gmail.com>,
Richard Purdie <rpurdie@rpsys.net>,
Jacek Anaszewski <j.anaszewski@samsung.com>,
linux-leds@vger.kernel.org,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-sunxi@googlegroups.com,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Heiko Stuebner <heiko@sntech.de>,
linux-rockchip@lists.infradead.org,
Jingoo Han <jingoohan1@gmail.com>,
Lee Jones <lee.jones@linaro.org>,
linux-fbdev@vger.kernel.org,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Robert Jarzmik <robert.jarzmik@free.fr>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Julia Lawall <Julia.Lawall@lip6.fr>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Ariel D'Alessandro" <ariel@vanguardiasur.com.ar>
Subject: Re: [PATCH v4 02/24] pwm: use pwm_get_xxx() helpers where appropriate
Date: Mon, 16 Nov 2015 19:06:46 +0100 [thread overview]
Message-ID: <20151116190646.1d5ba16e@bbrezillon> (raw)
In-Reply-To: <CAGhQ9VwEuwazF5Kdw=9R60EovVoiwen6fXiVjL+=EddXPYVGAg@mail.gmail.com>
Hi Joachim,
On Mon, 16 Nov 2015 18:46:44 +0100
Joachim Eastwood <manabian@gmail.com> wrote:
> Hi Boris
>
> (Adding Ariel for pwm-lpc18xx-sct)
>
> On 16 November 2015 at 09:56, Boris Brezillon
> <boris.brezillon@free-electrons.com> wrote:
> > Use pwm_get_xxx() helpers instead of directly accessing the pwm->xxx field.
> > Doing that will ease adaptation of the PWM framework to support atomic
> > update.
> >
> > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> > ---
> > Patch generated with the following coccinelle script:
> >
> > --->8---
> > virtual patch
> >
> > @@
> > struct pwm_device *p;
> > expression e;
> > @@
> > (
> > -(p)->polarity = e;
> > +pwm_set_polarity((p), e);
> > |
> > -(p)->polarity
> > +pwm_get_polarity((p))
> > |
> > -(p)->period = e;
> > +pwm_set_period((p), e);
> > |
> > -(p)->period
> > +pwm_get_period((p))
> > |
> > -(p)->duty_cycle = e;
> > +pwm_set_duty_cycle((p), e);
> > |
> > -(p)->duty_cycle
> > +pwm_get_duty_cycle((p))
> > )
> > --->8---
> > ---
> > drivers/pwm/pwm-crc.c | 2 +-
> > drivers/pwm/pwm-lpc18xx-sct.c | 2 +-
> > 2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
> > index 7101c70..2f88543 100644
> > --- a/drivers/pwm/pwm-crc.c
> > +++ b/drivers/pwm/pwm-crc.c
> > @@ -75,7 +75,7 @@ static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm,
> > return -EINVAL;
> > }
> >
> > - if (pwm->period != period_ns) {
> > + if (pwm_get_period((pwm)) != period_ns) {
> > int clk_div;
> >
> > /* changing the clk divisor, need to disable fisrt */
> > diff --git a/drivers/pwm/pwm-lpc18xx-sct.c b/drivers/pwm/pwm-lpc18xx-sct.c
> > index 9163085..091fa13 100644
> > --- a/drivers/pwm/pwm-lpc18xx-sct.c
> > +++ b/drivers/pwm/pwm-lpc18xx-sct.c
> > @@ -249,7 +249,7 @@ static int lpc18xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> > LPC18XX_PWM_EVSTATEMSK(lpc18xx_data->duty_event),
> > LPC18XX_PWM_EVSTATEMSK_ALL);
> >
> > - if (pwm->polarity == PWM_POLARITY_NORMAL) {
> > + if (pwm_get_polarity((pwm)) == PWM_POLARITY_NORMAL) {
>
> What is the deal with the double parentheses?
>
> Think I saw that in some of the other patches as well.
It comes from a typo in my coccinelle script. I already fixed it and
regenerated the faulty patches, so please ignore this aspect while
reviewing (this will be addressed in the next version).
Thanks,
Boris
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 02/24] pwm: use pwm_get_xxx() helpers where appropriate
Date: Mon, 16 Nov 2015 18:06:46 +0000 [thread overview]
Message-ID: <20151116190646.1d5ba16e@bbrezillon> (raw)
In-Reply-To: <CAGhQ9VwEuwazF5Kdw=9R60EovVoiwen6fXiVjL+=EddXPYVGAg@mail.gmail.com>
Hi Joachim,
On Mon, 16 Nov 2015 18:46:44 +0100
Joachim Eastwood <manabian@gmail.com> wrote:
> Hi Boris
>
> (Adding Ariel for pwm-lpc18xx-sct)
>
> On 16 November 2015 at 09:56, Boris Brezillon
> <boris.brezillon@free-electrons.com> wrote:
> > Use pwm_get_xxx() helpers instead of directly accessing the pwm->xxx field.
> > Doing that will ease adaptation of the PWM framework to support atomic
> > update.
> >
> > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> > ---
> > Patch generated with the following coccinelle script:
> >
> > --->8---
> > virtual patch
> >
> > @@
> > struct pwm_device *p;
> > expression e;
> > @@
> > (
> > -(p)->polarity = e;
> > +pwm_set_polarity((p), e);
> > |
> > -(p)->polarity
> > +pwm_get_polarity((p))
> > |
> > -(p)->period = e;
> > +pwm_set_period((p), e);
> > |
> > -(p)->period
> > +pwm_get_period((p))
> > |
> > -(p)->duty_cycle = e;
> > +pwm_set_duty_cycle((p), e);
> > |
> > -(p)->duty_cycle
> > +pwm_get_duty_cycle((p))
> > )
> > --->8---
> > ---
> > drivers/pwm/pwm-crc.c | 2 +-
> > drivers/pwm/pwm-lpc18xx-sct.c | 2 +-
> > 2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
> > index 7101c70..2f88543 100644
> > --- a/drivers/pwm/pwm-crc.c
> > +++ b/drivers/pwm/pwm-crc.c
> > @@ -75,7 +75,7 @@ static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm,
> > return -EINVAL;
> > }
> >
> > - if (pwm->period != period_ns) {
> > + if (pwm_get_period((pwm)) != period_ns) {
> > int clk_div;
> >
> > /* changing the clk divisor, need to disable fisrt */
> > diff --git a/drivers/pwm/pwm-lpc18xx-sct.c b/drivers/pwm/pwm-lpc18xx-sct.c
> > index 9163085..091fa13 100644
> > --- a/drivers/pwm/pwm-lpc18xx-sct.c
> > +++ b/drivers/pwm/pwm-lpc18xx-sct.c
> > @@ -249,7 +249,7 @@ static int lpc18xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> > LPC18XX_PWM_EVSTATEMSK(lpc18xx_data->duty_event),
> > LPC18XX_PWM_EVSTATEMSK_ALL);
> >
> > - if (pwm->polarity = PWM_POLARITY_NORMAL) {
> > + if (pwm_get_polarity((pwm)) = PWM_POLARITY_NORMAL) {
>
> What is the deal with the double parentheses?
>
> Think I saw that in some of the other patches as well.
It comes from a typo in my coccinelle script. I already fixed it and
regenerated the faulty patches, so please ignore this aspect while
reviewing (this will be addressed in the next version).
Thanks,
Boris
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: Joachim Eastwood <manabian@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>,
linux-pwm@vger.kernel.org,
Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
linux-clk@vger.kernel.org, Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Kamil Debski <k.debski@samsung.com>,
lm-sensors@lm-sensors.org, Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
linux-input@vger.kernel.org, Bryan Wu <cooloney@gmail.com>,
Richard Purdie <rpurdie@rpsys.net>,
Jacek Anaszewski <j.anaszewski@samsung.com>,
linux-leds@vger.kernel.org,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-sunxi@googlegroups.com,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Heiko Stuebner <heiko@sntech.de>,
linux-rockchip@lists.infradead.org,
Jingoo Han <jingoohan1@gmail.com>
Subject: Re: [PATCH v4 02/24] pwm: use pwm_get_xxx() helpers where appropriate
Date: Mon, 16 Nov 2015 19:06:46 +0100 [thread overview]
Message-ID: <20151116190646.1d5ba16e@bbrezillon> (raw)
In-Reply-To: <CAGhQ9VwEuwazF5Kdw=9R60EovVoiwen6fXiVjL+=EddXPYVGAg@mail.gmail.com>
Hi Joachim,
On Mon, 16 Nov 2015 18:46:44 +0100
Joachim Eastwood <manabian@gmail.com> wrote:
> Hi Boris
>
> (Adding Ariel for pwm-lpc18xx-sct)
>
> On 16 November 2015 at 09:56, Boris Brezillon
> <boris.brezillon@free-electrons.com> wrote:
> > Use pwm_get_xxx() helpers instead of directly accessing the pwm->xxx field.
> > Doing that will ease adaptation of the PWM framework to support atomic
> > update.
> >
> > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> > ---
> > Patch generated with the following coccinelle script:
> >
> > --->8---
> > virtual patch
> >
> > @@
> > struct pwm_device *p;
> > expression e;
> > @@
> > (
> > -(p)->polarity = e;
> > +pwm_set_polarity((p), e);
> > |
> > -(p)->polarity
> > +pwm_get_polarity((p))
> > |
> > -(p)->period = e;
> > +pwm_set_period((p), e);
> > |
> > -(p)->period
> > +pwm_get_period((p))
> > |
> > -(p)->duty_cycle = e;
> > +pwm_set_duty_cycle((p), e);
> > |
> > -(p)->duty_cycle
> > +pwm_get_duty_cycle((p))
> > )
> > --->8---
> > ---
> > drivers/pwm/pwm-crc.c | 2 +-
> > drivers/pwm/pwm-lpc18xx-sct.c | 2 +-
> > 2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
> > index 7101c70..2f88543 100644
> > --- a/drivers/pwm/pwm-crc.c
> > +++ b/drivers/pwm/pwm-crc.c
> > @@ -75,7 +75,7 @@ static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm,
> > return -EINVAL;
> > }
> >
> > - if (pwm->period != period_ns) {
> > + if (pwm_get_period((pwm)) != period_ns) {
> > int clk_div;
> >
> > /* changing the clk divisor, need to disable fisrt */
> > diff --git a/drivers/pwm/pwm-lpc18xx-sct.c b/drivers/pwm/pwm-lpc18xx-sct.c
> > index 9163085..091fa13 100644
> > --- a/drivers/pwm/pwm-lpc18xx-sct.c
> > +++ b/drivers/pwm/pwm-lpc18xx-sct.c
> > @@ -249,7 +249,7 @@ static int lpc18xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> > LPC18XX_PWM_EVSTATEMSK(lpc18xx_data->duty_event),
> > LPC18XX_PWM_EVSTATEMSK_ALL);
> >
> > - if (pwm->polarity == PWM_POLARITY_NORMAL) {
> > + if (pwm_get_polarity((pwm)) == PWM_POLARITY_NORMAL) {
>
> What is the deal with the double parentheses?
>
> Think I saw that in some of the other patches as well.
It comes from a typo in my coccinelle script. I already fixed it and
regenerated the faulty patches, so please ignore this aspect while
reviewing (this will be addressed in the next version).
Thanks,
Boris
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: boris.brezillon@free-electrons.com (Boris Brezillon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 02/24] pwm: use pwm_get_xxx() helpers where appropriate
Date: Mon, 16 Nov 2015 19:06:46 +0100 [thread overview]
Message-ID: <20151116190646.1d5ba16e@bbrezillon> (raw)
In-Reply-To: <CAGhQ9VwEuwazF5Kdw=9R60EovVoiwen6fXiVjL+=EddXPYVGAg@mail.gmail.com>
Hi Joachim,
On Mon, 16 Nov 2015 18:46:44 +0100
Joachim Eastwood <manabian@gmail.com> wrote:
> Hi Boris
>
> (Adding Ariel for pwm-lpc18xx-sct)
>
> On 16 November 2015 at 09:56, Boris Brezillon
> <boris.brezillon@free-electrons.com> wrote:
> > Use pwm_get_xxx() helpers instead of directly accessing the pwm->xxx field.
> > Doing that will ease adaptation of the PWM framework to support atomic
> > update.
> >
> > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> > ---
> > Patch generated with the following coccinelle script:
> >
> > --->8---
> > virtual patch
> >
> > @@
> > struct pwm_device *p;
> > expression e;
> > @@
> > (
> > -(p)->polarity = e;
> > +pwm_set_polarity((p), e);
> > |
> > -(p)->polarity
> > +pwm_get_polarity((p))
> > |
> > -(p)->period = e;
> > +pwm_set_period((p), e);
> > |
> > -(p)->period
> > +pwm_get_period((p))
> > |
> > -(p)->duty_cycle = e;
> > +pwm_set_duty_cycle((p), e);
> > |
> > -(p)->duty_cycle
> > +pwm_get_duty_cycle((p))
> > )
> > --->8---
> > ---
> > drivers/pwm/pwm-crc.c | 2 +-
> > drivers/pwm/pwm-lpc18xx-sct.c | 2 +-
> > 2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
> > index 7101c70..2f88543 100644
> > --- a/drivers/pwm/pwm-crc.c
> > +++ b/drivers/pwm/pwm-crc.c
> > @@ -75,7 +75,7 @@ static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm,
> > return -EINVAL;
> > }
> >
> > - if (pwm->period != period_ns) {
> > + if (pwm_get_period((pwm)) != period_ns) {
> > int clk_div;
> >
> > /* changing the clk divisor, need to disable fisrt */
> > diff --git a/drivers/pwm/pwm-lpc18xx-sct.c b/drivers/pwm/pwm-lpc18xx-sct.c
> > index 9163085..091fa13 100644
> > --- a/drivers/pwm/pwm-lpc18xx-sct.c
> > +++ b/drivers/pwm/pwm-lpc18xx-sct.c
> > @@ -249,7 +249,7 @@ static int lpc18xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> > LPC18XX_PWM_EVSTATEMSK(lpc18xx_data->duty_event),
> > LPC18XX_PWM_EVSTATEMSK_ALL);
> >
> > - if (pwm->polarity == PWM_POLARITY_NORMAL) {
> > + if (pwm_get_polarity((pwm)) == PWM_POLARITY_NORMAL) {
>
> What is the deal with the double parentheses?
>
> Think I saw that in some of the other patches as well.
It comes from a typo in my coccinelle script. I already fixed it and
regenerated the faulty patches, so please ignore this aspect while
reviewing (this will be addressed in the next version).
Thanks,
Boris
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
next prev parent reply other threads:[~2015-11-16 18:06 UTC|newest]
Thread overview: 193+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-16 8:56 [PATCH v4 00/24] pwm: add support for atomic update Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 01/24] pwm: rcar: make use of pwm_is_enabled() Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2016-03-16 14:30 ` Boris Brezillon
2016-03-16 14:30 ` Boris Brezillon
2016-03-16 14:30 ` Boris Brezillon
2016-03-16 14:30 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 02/24] pwm: use pwm_get_xxx() helpers where appropriate Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 17:46 ` Joachim Eastwood
2015-11-16 17:46 ` Joachim Eastwood
2015-11-16 17:46 ` Joachim Eastwood
2015-11-16 17:46 ` Joachim Eastwood
2015-11-16 18:06 ` Boris Brezillon [this message]
2015-11-16 18:06 ` Boris Brezillon
2015-11-16 18:06 ` Boris Brezillon
2015-11-16 18:06 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 03/24] clk: " Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-12-30 21:03 ` Michael Turquette
2015-12-30 21:03 ` Michael Turquette
2015-12-30 21:03 ` Michael Turquette
2015-12-30 21:03 ` Michael Turquette
2015-12-30 21:03 ` Michael Turquette
2015-11-16 8:56 ` [PATCH v4 04/24] hwmon: pwm-fan: " Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 15:59 ` Guenter Roeck
2015-11-16 15:59 ` Guenter Roeck
2015-11-16 15:59 ` Guenter Roeck
2015-11-16 15:59 ` Guenter Roeck
2015-11-16 16:53 ` Boris Brezillon
2015-11-16 16:53 ` Boris Brezillon
2015-11-16 16:53 ` Boris Brezillon
2015-11-16 16:53 ` Boris Brezillon
2015-11-16 17:00 ` Guenter Roeck
2015-11-16 17:00 ` Guenter Roeck
2015-11-16 17:00 ` Guenter Roeck
2015-11-16 17:00 ` Guenter Roeck
2015-11-16 8:56 ` [PATCH v4 05/24] misc: max77693-haptic: " Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 13:10 ` Krzysztof Kozlowski
2015-11-16 13:10 ` Krzysztof Kozlowski
2015-11-16 13:10 ` Krzysztof Kozlowski
2015-11-16 13:10 ` Krzysztof Kozlowski
2015-11-16 13:55 ` Boris Brezillon
2015-11-16 13:55 ` Boris Brezillon
2015-11-16 13:55 ` Boris Brezillon
2015-11-16 13:55 ` Boris Brezillon
2015-11-16 15:55 ` Guenter Roeck
2015-11-16 15:55 ` Guenter Roeck
2015-11-16 15:55 ` Guenter Roeck
2015-11-16 15:55 ` Guenter Roeck
2015-11-16 16:00 ` Boris Brezillon
2015-11-16 16:00 ` Boris Brezillon
2015-11-16 16:00 ` Boris Brezillon
2015-11-16 16:00 ` Boris Brezillon
2015-11-17 17:32 ` Dmitry Torokhov
2015-11-17 17:32 ` Dmitry Torokhov
2015-11-17 17:32 ` Dmitry Torokhov
2015-11-17 17:32 ` Dmitry Torokhov
2015-11-16 8:56 ` [PATCH v4 06/24] pwm: introduce default period and polarity concepts Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 07/24] pwm: use pwm_get/set_default_xxx() helpers where appropriate Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 08/24] leds: " Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 09/24] regulator: " Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 10:55 ` Mark Brown
2015-11-16 10:55 ` Mark Brown
2015-11-16 10:55 ` Mark Brown
2015-11-16 10:55 ` Mark Brown
2015-11-16 12:23 ` Boris Brezillon
2015-11-16 12:23 ` Boris Brezillon
2015-11-16 12:23 ` Boris Brezillon
2015-11-16 12:23 ` Boris Brezillon
2015-11-16 18:42 ` Mark Brown
2015-11-16 18:42 ` Mark Brown
2015-11-16 18:42 ` Mark Brown
2015-11-16 18:42 ` Mark Brown
2015-11-16 19:28 ` Boris Brezillon
2015-11-16 19:28 ` Boris Brezillon
2015-11-16 19:28 ` Boris Brezillon
2015-11-16 19:28 ` Boris Brezillon
2015-12-02 10:37 ` Boris Brezillon
2015-12-02 10:37 ` Boris Brezillon
2015-12-02 10:37 ` Boris Brezillon
2015-12-02 10:37 ` Boris Brezillon
2015-12-30 11:01 ` Boris Brezillon
2015-12-30 11:01 ` Boris Brezillon
2015-12-30 11:01 ` Boris Brezillon
2015-12-30 11:01 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 10/24] backlight: " Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 11/24] fbdev: " Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 12/24] misc: max77693: " Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 13/24] hwmon: pwm-fan: " Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 16:00 ` Guenter Roeck
2015-11-16 16:00 ` Guenter Roeck
2015-11-16 16:00 ` Guenter Roeck
2015-11-16 16:00 ` Guenter Roeck
2015-11-16 8:56 ` [PATCH v4 14/24] clk: pwm: " Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-12-30 21:05 ` Michael Turquette
2015-12-30 21:05 ` Michael Turquette
2015-12-30 21:05 ` Michael Turquette
2015-12-30 21:05 ` Michael Turquette
2015-12-30 21:05 ` Michael Turquette
2015-11-16 8:56 ` [PATCH v4 15/24] pwm: define a new pwm_state struct Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 16/24] pwm: move the enabled/disabled info to " Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 17/24] backlight: pwm_bl: remove useless call to pwm_set_period Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 18/24] pwm: declare a default PWM state Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 19/24] pwm: add the PWM initial state retrieval infra Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 20/24] pwm: add the core infrastructure to allow atomic update Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 21/24] pwm: add information about polarity, duty cycle and period to debugfs Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 22/24] pwm: rockchip: add initial state retrieval Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 23/24] pwm: rockchip: add support for atomic update Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` [PATCH v4 24/24] regulator: pwm: properly initialize the ->state field Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 8:56 ` Boris Brezillon
2015-11-16 14:45 ` [PATCH v4 00/24] pwm: add support for atomic update Heiko Stübner
2015-11-16 14:45 ` Heiko Stübner
2015-11-16 14:45 ` Heiko Stübner
[not found] ` <1447664207-24370-1-git-send-email-boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2015-11-16 14:45 ` Heiko Stübner
2015-11-16 14:45 ` Heiko Stübner
2015-11-16 14:45 ` Heiko Stübner
2015-11-16 14:45 ` Heiko Stübner
2015-11-16 14:45 ` Heiko Stübner
2015-11-16 14:45 ` Heiko Stübner
2015-11-16 14:45 ` Heiko Stübner
2015-11-16 14:45 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151116190646.1d5ba16e@bbrezillon \
--to=boris.brezillon@free-electrons.com \
--cc=Julia.Lawall@lip6.fr \
--cc=alexandre.belloni@free-electrons.com \
--cc=ariel@vanguardiasur.com.ar \
--cc=broonie@kernel.org \
--cc=cooloney@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=heiko@sntech.de \
--cc=j.anaszewski@samsung.com \
--cc=jdelvare@suse.com \
--cc=jingoohan1@gmail.com \
--cc=k.debski@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=manabian@gmail.com \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@baylibre.com \
--cc=plagnioj@jcrosoft.com \
--cc=robert.jarzmik@free.fr \
--cc=rpurdie@rpsys.net \
--cc=sboyd@codeaurora.org \
--cc=thierry.reding@gmail.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=tomi.valkeinen@ti.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.