From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Cc: linus.walleij@linaro.org, linux-kernel@vger.kernel.org,
koji.matsuoka.xm@renesas.com, linux-gpio@vger.kernel.org,
horms@verge.net.au, geert@glider.be,
laurent.pinchart@ideasonboard.com,
Magnus Damm <magnus.damm@gmail.com>
Subject: [PATCH 03/04] pinctrl: sh-pfc: r8a7794: Add missing dot clock signals
Date: Tue, 17 Nov 2015 12:19:02 +0900 [thread overview]
Message-ID: <20151117031902.24924.4588.sendpatchset@little-apple> (raw)
In-Reply-To: <20151117031832.24924.60685.sendpatchset@little-apple>
From: Magnus Damm <damm+renesas@opensource.se>
Add missing r8a7794 DU dot clock output signals and in
particular the DU1_DOTCLKOUT0 signal on GP4_25 which is
needed by DU1 on the r8a7794 ALT board.
The groups "du0_clk_out" and "du1_clk_out" are replaced by
"du0_dotclkout0", "du0_dotclkout1", "du1_dotclkout0" and
"du1_dotclkout1".
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---
drivers/pinctrl/sh-pfc/pfc-r8a7794.c | 34 ++++++++++++++++++++++++++--------
1 file changed, 26 insertions(+), 8 deletions(-)
--- 0014/drivers/pinctrl/sh-pfc/pfc-r8a7794.c
+++ work/drivers/pinctrl/sh-pfc/pfc-r8a7794.c 2015-11-16 22:08:28.230513000 +0900
@@ -1586,18 +1586,32 @@ static const unsigned int du1_rgb888_mux
DU1_DB7_MARK, DU1_DB6_MARK, DU1_DB5_MARK, DU1_DB4_MARK,
DU1_DB3_MARK, DU1_DB2_MARK, DU1_DB1_MARK, DU1_DB0_MARK,
};
-static const unsigned int du0_clk_out_pins[] = {
+static const unsigned int du0_clk0_out_pins[] = {
/* CLKOUT */
RCAR_GP_PIN(2, 25),
};
-static const unsigned int du0_clk_out_mux[] = {
+static const unsigned int du0_clk0_out_mux[] = {
DU0_DOTCLKOUT0_MARK
};
-static const unsigned int du1_clk_out_pins[] = {
+static const unsigned int du0_clk1_out_pins[] = {
+ /* CLKOUT */
+ RCAR_GP_PIN(2, 26),
+};
+static const unsigned int du0_clk1_out_mux[] = {
+ DU0_DOTCLKOUT1_MARK
+};
+static const unsigned int du1_clk0_out_pins[] = {
+ /* CLKOUT */
+ RCAR_GP_PIN(4, 25),
+};
+static const unsigned int du1_clk0_out_mux[] = {
+ DU1_DOTCLKOUT0_MARK
+};
+static const unsigned int du1_clk1_out_pins[] = {
/* CLKOUT */
RCAR_GP_PIN(4, 26),
};
-static const unsigned int du1_clk_out_mux[] = {
+static const unsigned int du1_clk1_out_mux[] = {
DU1_DOTCLKOUT1_MARK
};
static const unsigned int du0_sync_pins[] = {
@@ -2942,8 +2956,10 @@ static const struct sh_pfc_pin_group pin
SH_PFC_PIN_GROUP(du0_rgb888),
SH_PFC_PIN_GROUP(du1_rgb666),
SH_PFC_PIN_GROUP(du1_rgb888),
- SH_PFC_PIN_GROUP(du0_clk_out),
- SH_PFC_PIN_GROUP(du1_clk_out),
+ SH_PFC_PIN_GROUP(du0_clk0_out),
+ SH_PFC_PIN_GROUP(du0_clk1_out),
+ SH_PFC_PIN_GROUP(du1_clk0_out),
+ SH_PFC_PIN_GROUP(du1_clk1_out),
SH_PFC_PIN_GROUP(du0_sync),
SH_PFC_PIN_GROUP(du1_sync),
SH_PFC_PIN_GROUP(du0_cde),
@@ -3134,8 +3150,10 @@ static const char * const du_groups[] =
"du0_rgb888",
"du1_rgb666",
"du1_rgb888",
- "du0_clk_out",
- "du1_clk_out",
+ "du0_dotclkout0",
+ "du0_dotclkout1",
+ "du1_dotclkout0",
+ "du1_dotclkout1",
"du0_sync",
"du1_sync",
"du0_cde",
WARNING: multiple messages have this Message-ID (diff)
From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Cc: linus.walleij@linaro.org, linux-kernel@vger.kernel.org,
koji.matsuoka.xm@renesas.com, linux-gpio@vger.kernel.org,
horms@verge.net.au, geert@glider.be,
laurent.pinchart@ideasonboard.com,
Magnus Damm <magnus.damm@gmail.com>
Subject: [PATCH 03/04] pinctrl: sh-pfc: r8a7794: Add missing dot clock signals
Date: Tue, 17 Nov 2015 03:19:02 +0000 [thread overview]
Message-ID: <20151117031902.24924.4588.sendpatchset@little-apple> (raw)
In-Reply-To: <20151117031832.24924.60685.sendpatchset@little-apple>
From: Magnus Damm <damm+renesas@opensource.se>
Add missing r8a7794 DU dot clock output signals and in
particular the DU1_DOTCLKOUT0 signal on GP4_25 which is
needed by DU1 on the r8a7794 ALT board.
The groups "du0_clk_out" and "du1_clk_out" are replaced by
"du0_dotclkout0", "du0_dotclkout1", "du1_dotclkout0" and
"du1_dotclkout1".
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---
drivers/pinctrl/sh-pfc/pfc-r8a7794.c | 34 ++++++++++++++++++++++++++--------
1 file changed, 26 insertions(+), 8 deletions(-)
--- 0014/drivers/pinctrl/sh-pfc/pfc-r8a7794.c
+++ work/drivers/pinctrl/sh-pfc/pfc-r8a7794.c 2015-11-16 22:08:28.230513000 +0900
@@ -1586,18 +1586,32 @@ static const unsigned int du1_rgb888_mux
DU1_DB7_MARK, DU1_DB6_MARK, DU1_DB5_MARK, DU1_DB4_MARK,
DU1_DB3_MARK, DU1_DB2_MARK, DU1_DB1_MARK, DU1_DB0_MARK,
};
-static const unsigned int du0_clk_out_pins[] = {
+static const unsigned int du0_clk0_out_pins[] = {
/* CLKOUT */
RCAR_GP_PIN(2, 25),
};
-static const unsigned int du0_clk_out_mux[] = {
+static const unsigned int du0_clk0_out_mux[] = {
DU0_DOTCLKOUT0_MARK
};
-static const unsigned int du1_clk_out_pins[] = {
+static const unsigned int du0_clk1_out_pins[] = {
+ /* CLKOUT */
+ RCAR_GP_PIN(2, 26),
+};
+static const unsigned int du0_clk1_out_mux[] = {
+ DU0_DOTCLKOUT1_MARK
+};
+static const unsigned int du1_clk0_out_pins[] = {
+ /* CLKOUT */
+ RCAR_GP_PIN(4, 25),
+};
+static const unsigned int du1_clk0_out_mux[] = {
+ DU1_DOTCLKOUT0_MARK
+};
+static const unsigned int du1_clk1_out_pins[] = {
/* CLKOUT */
RCAR_GP_PIN(4, 26),
};
-static const unsigned int du1_clk_out_mux[] = {
+static const unsigned int du1_clk1_out_mux[] = {
DU1_DOTCLKOUT1_MARK
};
static const unsigned int du0_sync_pins[] = {
@@ -2942,8 +2956,10 @@ static const struct sh_pfc_pin_group pin
SH_PFC_PIN_GROUP(du0_rgb888),
SH_PFC_PIN_GROUP(du1_rgb666),
SH_PFC_PIN_GROUP(du1_rgb888),
- SH_PFC_PIN_GROUP(du0_clk_out),
- SH_PFC_PIN_GROUP(du1_clk_out),
+ SH_PFC_PIN_GROUP(du0_clk0_out),
+ SH_PFC_PIN_GROUP(du0_clk1_out),
+ SH_PFC_PIN_GROUP(du1_clk0_out),
+ SH_PFC_PIN_GROUP(du1_clk1_out),
SH_PFC_PIN_GROUP(du0_sync),
SH_PFC_PIN_GROUP(du1_sync),
SH_PFC_PIN_GROUP(du0_cde),
@@ -3134,8 +3150,10 @@ static const char * const du_groups[] "du0_rgb888",
"du1_rgb666",
"du1_rgb888",
- "du0_clk_out",
- "du1_clk_out",
+ "du0_dotclkout0",
+ "du0_dotclkout1",
+ "du1_dotclkout0",
+ "du1_dotclkout1",
"du0_sync",
"du1_sync",
"du0_cde",
next prev parent reply other threads:[~2015-11-17 3:19 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-17 3:18 [PATCH 00/04] pinctrl: sh-pfc: r8a7794: DU support Magnus Damm
2015-11-17 3:18 ` Magnus Damm
2015-11-17 3:18 ` [PATCH 01/04] pinctrl: sh-pfc: r8a7794: Add DU pin groups Magnus Damm
2015-11-17 3:18 ` Magnus Damm
2015-11-29 21:25 ` Linus Walleij
2015-11-29 21:25 ` Linus Walleij
2015-11-30 8:53 ` Geert Uytterhoeven
2015-11-30 8:53 ` Geert Uytterhoeven
2015-11-17 3:18 ` [PATCH 02/04] pinctrl: sh-pfc: r8a7794: Separate DU CDE and DISP Magnus Damm
2015-11-17 3:18 ` Magnus Damm
2015-11-17 3:19 ` Magnus Damm [this message]
2015-11-17 3:19 ` [PATCH 03/04] pinctrl: sh-pfc: r8a7794: Add missing dot clock signals Magnus Damm
2015-12-21 22:01 ` Sergei Shtylyov
2015-12-21 22:01 ` Sergei Shtylyov
2015-11-17 3:19 ` [PATCH 04/04] pinctrl: sh-pfc: r8a7794: Break out ODDF from sync Magnus Damm
2015-11-17 3:19 ` Magnus Damm
2015-11-20 2:46 ` [PATCH 00/04] pinctrl: sh-pfc: r8a7794: DU support Laurent Pinchart
2015-11-20 2:46 ` Laurent Pinchart
2015-11-20 7:16 ` Magnus Damm
2015-11-20 7:16 ` Magnus Damm
2015-11-20 14:53 ` Laurent Pinchart
2015-11-20 14:53 ` Laurent Pinchart
2015-11-25 0:16 ` Simon Horman
2015-11-25 0:16 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151117031902.24924.4588.sendpatchset@little-apple \
--to=magnus.damm@gmail.com \
--cc=geert@glider.be \
--cc=horms@verge.net.au \
--cc=koji.matsuoka.xm@renesas.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.