From: Will Deacon <will.deacon@arm.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org,
Arnd Bergmann <arnd@arndb.de>,
David Daney <david.daney@cavium.com>,
Bjorn Helgaas <bhelgaas@google.com>
Subject: Re: [PATCH 2/3] drivers: pci: host-generic: claim bus resources on PROBE_ONLY set-ups
Date: Mon, 23 Nov 2015 13:47:28 +0000 [thread overview]
Message-ID: <20151123134727.GA4236@arm.com> (raw)
In-Reply-To: <1447779838-15585-2-git-send-email-lorenzo.pieralisi@arm.com>
On Tue, Nov 17, 2015 at 05:03:57PM +0000, Lorenzo Pieralisi wrote:
> The PCI host generic driver does not reassign bus resources on systems
> that require the BARs set-up to be immutable (ie PROBE_ONLY) since
> that would trigger system failures. Nonetheless, PCI bus resources
> allocated to PCI bridge and devices must be claimed in order to be
> validated and inserted in the kernel resource tree, but the current
> driver omits the resources claiming and relies on arch specific kludges
> to prevent probing failure (ie preventing resources enablement on
> PROBE_ONLY systems).
>
> This patch adds code to the PCI host generic driver that correctly
> claims bus resources upon probe on systems that are required to
> prevent reassignment after bus enumeration, so that the allocated
> resources can be enabled successfully upon PCI device drivers probing,
> without resorting to arch back-ends workarounds.
>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: David Daney <david.daney@cavium.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> ---
> drivers/pci/host/pci-host-generic.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
Assuming patch one is accepted, then this looks fine to me:
Acked-by: Will Deacon <will.deacon@arm.com>
Will
> diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c
> index 5434c90..c62d13f 100644
> --- a/drivers/pci/host/pci-host-generic.c
> +++ b/drivers/pci/host/pci-host-generic.c
> @@ -261,7 +261,10 @@ static int gen_pci_probe(struct platform_device *pdev)
>
> pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
>
> - if (!pci_has_flag(PCI_PROBE_ONLY)) {
> +
> + if (pci_has_flag(PCI_PROBE_ONLY)) {
> + pci_bus_claim_resources(bus);
> + } else {
> pci_bus_size_bridges(bus);
> pci_bus_assign_resources(bus);
>
> --
> 2.5.1
>
WARNING: multiple messages have this Message-ID (diff)
From: will.deacon@arm.com (Will Deacon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] drivers: pci: host-generic: claim bus resources on PROBE_ONLY set-ups
Date: Mon, 23 Nov 2015 13:47:28 +0000 [thread overview]
Message-ID: <20151123134727.GA4236@arm.com> (raw)
In-Reply-To: <1447779838-15585-2-git-send-email-lorenzo.pieralisi@arm.com>
On Tue, Nov 17, 2015 at 05:03:57PM +0000, Lorenzo Pieralisi wrote:
> The PCI host generic driver does not reassign bus resources on systems
> that require the BARs set-up to be immutable (ie PROBE_ONLY) since
> that would trigger system failures. Nonetheless, PCI bus resources
> allocated to PCI bridge and devices must be claimed in order to be
> validated and inserted in the kernel resource tree, but the current
> driver omits the resources claiming and relies on arch specific kludges
> to prevent probing failure (ie preventing resources enablement on
> PROBE_ONLY systems).
>
> This patch adds code to the PCI host generic driver that correctly
> claims bus resources upon probe on systems that are required to
> prevent reassignment after bus enumeration, so that the allocated
> resources can be enabled successfully upon PCI device drivers probing,
> without resorting to arch back-ends workarounds.
>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: David Daney <david.daney@cavium.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> ---
> drivers/pci/host/pci-host-generic.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
Assuming patch one is accepted, then this looks fine to me:
Acked-by: Will Deacon <will.deacon@arm.com>
Will
> diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c
> index 5434c90..c62d13f 100644
> --- a/drivers/pci/host/pci-host-generic.c
> +++ b/drivers/pci/host/pci-host-generic.c
> @@ -261,7 +261,10 @@ static int gen_pci_probe(struct platform_device *pdev)
>
> pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
>
> - if (!pci_has_flag(PCI_PROBE_ONLY)) {
> +
> + if (pci_has_flag(PCI_PROBE_ONLY)) {
> + pci_bus_claim_resources(bus);
> + } else {
> pci_bus_size_bridges(bus);
> pci_bus_assign_resources(bus);
>
> --
> 2.5.1
>
next prev parent reply other threads:[~2015-11-23 13:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-17 17:03 [PATCH 1/3] drivers: pci: add generic code to claim bus resources Lorenzo Pieralisi
2015-11-17 17:03 ` Lorenzo Pieralisi
2015-11-17 17:03 ` [PATCH 2/3] drivers: pci: host-generic: claim bus resources on PROBE_ONLY set-ups Lorenzo Pieralisi
2015-11-17 17:03 ` Lorenzo Pieralisi
2015-11-23 13:47 ` Will Deacon [this message]
2015-11-23 13:47 ` Will Deacon
2015-11-17 17:03 ` [PATCH 3/3] arm/arm64: pci: remove arch specific pcibios_enable_device() Lorenzo Pieralisi
2015-11-17 17:03 ` Lorenzo Pieralisi
2015-11-23 13:49 ` Will Deacon
2015-11-23 13:49 ` Will Deacon
2016-01-20 16:22 ` Lorenzo Pieralisi
2016-01-20 16:22 ` Lorenzo Pieralisi
2016-02-25 15:24 ` Bjorn Helgaas
2016-02-25 15:24 ` Bjorn Helgaas
2016-02-25 16:05 ` Lorenzo Pieralisi
2016-02-25 16:05 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151123134727.GA4236@arm.com \
--to=will.deacon@arm.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=david.daney@cavium.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.