* [RESEND PATCH v5 0/3] mfd: sec: add S2MPS15 PMIC support
@ 2015-11-20 10:37 ` Alim Akhtar
0 siblings, 0 replies; 14+ messages in thread
From: Alim Akhtar @ 2015-11-20 10:37 UTC (permalink / raw)
To: lee.jones, broonie
Cc: k.kozlowski, alexandre.belloni, linux-kernel, linux-samsung-soc,
rtc-linux, alim.akhtar
Hi Lee/Mark,
This a resend of series [0] that adds s2mps15 pmic support.
These patches have no changes, just collected some Reviewed-by and Acked-by tags.
[0] -> https://lkml.org/lkml/2015/10/30/44
Mark,
Can I have you acked-by for patch# 2/3? so that these can go in via MFD tree.
Alim Akhtar (1):
drivers/rtc/rtc-s5m.c: add support for S2MPS15 RTC
Thomas Abraham (2):
mfd: sec: Add support for S2MPS15 PMIC
regulator: s2mps11: add support for S2MPS15 regulators
drivers/mfd/sec-core.c | 31 +++++++
drivers/mfd/sec-irq.c | 8 ++
drivers/regulator/Kconfig | 4 +-
drivers/regulator/s2mps11.c | 135 +++++++++++++++++++++++++++++-
drivers/rtc/rtc-s5m.c | 37 +++++++-
include/linux/mfd/samsung/core.h | 1 +
include/linux/mfd/samsung/rtc.h | 2 +
include/linux/mfd/samsung/s2mps15.h | 158 +++++++++++++++++++++++++++++++++++
8 files changed, 369 insertions(+), 7 deletions(-)
create mode 100644 include/linux/mfd/samsung/s2mps15.h
--
1.7.10.4
^ permalink raw reply [flat|nested] 14+ messages in thread
* [RESEND PATCH v5 1/3] mfd: sec: Add support for S2MPS15 PMIC
2015-11-20 10:37 ` Alim Akhtar
(?)
@ 2015-11-20 10:37 ` Alim Akhtar
-1 siblings, 0 replies; 14+ messages in thread
From: Alim Akhtar @ 2015-11-20 10:37 UTC (permalink / raw)
To: lee.jones, broonie
Cc: k.kozlowski, alexandre.belloni, linux-kernel, linux-samsung-soc,
rtc-linux, alim.akhtar, Thomas Abraham
From: Thomas Abraham <thomas.ab@samsung.com>
Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15
PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz
clock outputs and battery charger. This patch adds initial support for
LDO and buck regulators of S2MPS15 device.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
[Alim: Added s2mps15_devs like rtc and clk and related changes]
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/sec-core.c | 31 +++++++
drivers/mfd/sec-irq.c | 8 ++
include/linux/mfd/samsung/core.h | 1 +
include/linux/mfd/samsung/s2mps15.h | 158 +++++++++++++++++++++++++++++++++++
4 files changed, 198 insertions(+)
create mode 100644 include/linux/mfd/samsung/s2mps15.h
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 989076d6cb83..7c4e7be17f1e 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -29,6 +29,7 @@
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mps15.h>
#include <linux/mfd/samsung/s2mpu02.h>
#include <linux/mfd/samsung/s5m8763.h>
#include <linux/mfd/samsung/s5m8767.h>
@@ -96,6 +97,17 @@ static const struct mfd_cell s2mps14_devs[] = {
}
};
+static const struct mfd_cell s2mps15_devs[] = {
+ {
+ .name = "s2mps15-regulator",
+ }, {
+ .name = "s2mps15-rtc",
+ }, {
+ .name = "s2mps13-clk",
+ .of_compatible = "samsung,s2mps13-clk",
+ },
+};
+
static const struct mfd_cell s2mpa01_devs[] = {
{
.name = "s2mpa01-pmic",
@@ -122,6 +134,9 @@ static const struct of_device_id sec_dt_match[] = {
.compatible = "samsung,s2mps14-pmic",
.data = (void *)S2MPS14X,
}, {
+ .compatible = "samsung,s2mps15-pmic",
+ .data = (void *)S2MPS15X,
+ }, {
.compatible = "samsung,s2mpa01-pmic",
.data = (void *)S2MPA01,
}, {
@@ -223,6 +238,15 @@ static const struct regmap_config s2mps14_regmap_config = {
.cache_type = REGCACHE_FLAT,
};
+static const struct regmap_config s2mps15_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = S2MPS15_REG_LDODSCH4,
+ .volatile_reg = s2mps11_volatile,
+ .cache_type = REGCACHE_FLAT,
+};
+
static const struct regmap_config s2mpu02_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -384,6 +408,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
case S2MPS14X:
regmap = &s2mps14_regmap_config;
break;
+ case S2MPS15X:
+ regmap = &s2mps15_regmap_config;
+ break;
case S5M8763X:
regmap = &s5m8763_regmap_config;
break;
@@ -442,6 +469,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
sec_devs = s2mps14_devs;
num_sec_devs = ARRAY_SIZE(s2mps14_devs);
break;
+ case S2MPS15X:
+ sec_devs = s2mps15_devs;
+ num_sec_devs = ARRAY_SIZE(s2mps15_devs);
+ break;
case S2MPU02:
sec_devs = s2mpu02_devs;
num_sec_devs = ARRAY_SIZE(s2mpu02_devs);
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 806fa8dbb22d..d77de431cc50 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -407,6 +407,11 @@ static const struct regmap_irq_chip s2mps14_irq_chip = {
S2MPS1X_IRQ_CHIP_COMMON_DATA,
};
+static const struct regmap_irq_chip s2mps15_irq_chip = {
+ .name = "s2mps15",
+ S2MPS1X_IRQ_CHIP_COMMON_DATA,
+};
+
static const struct regmap_irq_chip s2mpu02_irq_chip = {
.name = "s2mpu02",
.irqs = s2mpu02_irqs,
@@ -466,6 +471,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
case S2MPS14X:
sec_irq_chip = &s2mps14_irq_chip;
break;
+ case S2MPS15X:
+ sec_irq_chip = &s2mps15_irq_chip;
+ break;
case S2MPU02:
sec_irq_chip = &s2mpu02_irq_chip;
break;
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index a06098639399..6bc4bcd488ac 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -44,6 +44,7 @@ enum sec_device_type {
S2MPS11X,
S2MPS13X,
S2MPS14X,
+ S2MPS15X,
S2MPU02,
};
diff --git a/include/linux/mfd/samsung/s2mps15.h b/include/linux/mfd/samsung/s2mps15.h
new file mode 100644
index 000000000000..36d35287c3c0
--- /dev/null
+++ b/include/linux/mfd/samsung/s2mps15.h
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_MFD_S2MPS15_H
+#define __LINUX_MFD_S2MPS15_H
+
+/* S2MPS15 registers */
+enum s2mps15_reg {
+ S2MPS15_REG_ID,
+ S2MPS15_REG_INT1,
+ S2MPS15_REG_INT2,
+ S2MPS15_REG_INT3,
+ S2MPS15_REG_INT1M,
+ S2MPS15_REG_INT2M,
+ S2MPS15_REG_INT3M,
+ S2MPS15_REG_ST1,
+ S2MPS15_REG_ST2,
+ S2MPS15_REG_PWRONSRC,
+ S2MPS15_REG_OFFSRC,
+ S2MPS15_REG_BU_CHG,
+ S2MPS15_REG_RTC_BUF,
+ S2MPS15_REG_CTRL1,
+ S2MPS15_REG_CTRL2,
+ S2MPS15_REG_RSVD1,
+ S2MPS15_REG_RSVD2,
+ S2MPS15_REG_RSVD3,
+ S2MPS15_REG_RSVD4,
+ S2MPS15_REG_RSVD5,
+ S2MPS15_REG_RSVD6,
+ S2MPS15_REG_CTRL3,
+ S2MPS15_REG_RSVD7,
+ S2MPS15_REG_RSVD8,
+ S2MPS15_REG_RSVD9,
+ S2MPS15_REG_B1CTRL1,
+ S2MPS15_REG_B1CTRL2,
+ S2MPS15_REG_B2CTRL1,
+ S2MPS15_REG_B2CTRL2,
+ S2MPS15_REG_B3CTRL1,
+ S2MPS15_REG_B3CTRL2,
+ S2MPS15_REG_B4CTRL1,
+ S2MPS15_REG_B4CTRL2,
+ S2MPS15_REG_B5CTRL1,
+ S2MPS15_REG_B5CTRL2,
+ S2MPS15_REG_B6CTRL1,
+ S2MPS15_REG_B6CTRL2,
+ S2MPS15_REG_B7CTRL1,
+ S2MPS15_REG_B7CTRL2,
+ S2MPS15_REG_B8CTRL1,
+ S2MPS15_REG_B8CTRL2,
+ S2MPS15_REG_B9CTRL1,
+ S2MPS15_REG_B9CTRL2,
+ S2MPS15_REG_B10CTRL1,
+ S2MPS15_REG_B10CTRL2,
+ S2MPS15_REG_BBCTRL1,
+ S2MPS15_REG_BBCTRL2,
+ S2MPS15_REG_BRAMP,
+ S2MPS15_REG_LDODVS1,
+ S2MPS15_REG_LDODVS2,
+ S2MPS15_REG_LDODVS3,
+ S2MPS15_REG_LDODVS4,
+ S2MPS15_REG_L1CTRL,
+ S2MPS15_REG_L2CTRL,
+ S2MPS15_REG_L3CTRL,
+ S2MPS15_REG_L4CTRL,
+ S2MPS15_REG_L5CTRL,
+ S2MPS15_REG_L6CTRL,
+ S2MPS15_REG_L7CTRL,
+ S2MPS15_REG_L8CTRL,
+ S2MPS15_REG_L9CTRL,
+ S2MPS15_REG_L10CTRL,
+ S2MPS15_REG_L11CTRL,
+ S2MPS15_REG_L12CTRL,
+ S2MPS15_REG_L13CTRL,
+ S2MPS15_REG_L14CTRL,
+ S2MPS15_REG_L15CTRL,
+ S2MPS15_REG_L16CTRL,
+ S2MPS15_REG_L17CTRL,
+ S2MPS15_REG_L18CTRL,
+ S2MPS15_REG_L19CTRL,
+ S2MPS15_REG_L20CTRL,
+ S2MPS15_REG_L21CTRL,
+ S2MPS15_REG_L22CTRL,
+ S2MPS15_REG_L23CTRL,
+ S2MPS15_REG_L24CTRL,
+ S2MPS15_REG_L25CTRL,
+ S2MPS15_REG_L26CTRL,
+ S2MPS15_REG_L27CTRL,
+ S2MPS15_REG_LDODSCH1,
+ S2MPS15_REG_LDODSCH2,
+ S2MPS15_REG_LDODSCH3,
+ S2MPS15_REG_LDODSCH4,
+};
+
+/* S2MPS15 regulator ids */
+enum s2mps15_regulators {
+ S2MPS15_LDO1,
+ S2MPS15_LDO2,
+ S2MPS15_LDO3,
+ S2MPS15_LDO4,
+ S2MPS15_LDO5,
+ S2MPS15_LDO6,
+ S2MPS15_LDO7,
+ S2MPS15_LDO8,
+ S2MPS15_LDO9,
+ S2MPS15_LDO10,
+ S2MPS15_LDO11,
+ S2MPS15_LDO12,
+ S2MPS15_LDO13,
+ S2MPS15_LDO14,
+ S2MPS15_LDO15,
+ S2MPS15_LDO16,
+ S2MPS15_LDO17,
+ S2MPS15_LDO18,
+ S2MPS15_LDO19,
+ S2MPS15_LDO20,
+ S2MPS15_LDO21,
+ S2MPS15_LDO22,
+ S2MPS15_LDO23,
+ S2MPS15_LDO24,
+ S2MPS15_LDO25,
+ S2MPS15_LDO26,
+ S2MPS15_LDO27,
+ S2MPS15_BUCK1,
+ S2MPS15_BUCK2,
+ S2MPS15_BUCK3,
+ S2MPS15_BUCK4,
+ S2MPS15_BUCK5,
+ S2MPS15_BUCK6,
+ S2MPS15_BUCK7,
+ S2MPS15_BUCK8,
+ S2MPS15_BUCK9,
+ S2MPS15_BUCK10,
+ S2MPS15_BUCK11,
+ S2MPS15_REGULATOR_MAX,
+};
+
+#define S2MPS15_LDO_VSEL_MASK (0x3F)
+#define S2MPS15_BUCK_VSEL_MASK (0xFF)
+
+#define S2MPS15_ENABLE_SHIFT (0x06)
+#define S2MPS15_ENABLE_MASK (0x03 << S2MPS15_ENABLE_SHIFT)
+
+#define S2MPS15_LDO_N_VOLTAGES (S2MPS15_LDO_VSEL_MASK + 1)
+#define S2MPS15_BUCK_N_VOLTAGES (S2MPS15_BUCK_VSEL_MASK + 1)
+
+#endif /* __LINUX_MFD_S2MPS15_H */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [rtc-linux] [RESEND PATCH v5 2/3] regulator: s2mps11: add support for S2MPS15 regulators
2015-11-20 10:37 ` Alim Akhtar
@ 2015-11-20 10:37 ` Alim Akhtar
-1 siblings, 0 replies; 14+ messages in thread
From: Alim Akhtar @ 2015-11-20 10:37 UTC (permalink / raw)
To: lee.jones, broonie
Cc: k.kozlowski, alexandre.belloni, linux-kernel, linux-samsung-soc,
rtc-linux, alim.akhtar, Thomas Abraham
From: Thomas Abraham <thomas.ab@samsung.com>
The S2MPS15 PMIC is similar in functionality to S2MPS11/14 PMIC. It contains
27 LDO and 10 Buck regulators and allows programming these regulators via a
I2C interface. This patch adds initial support for LDO/Buck regulators of
S2MPS15 PMIC.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/regulator/Kconfig | 4 +-
drivers/regulator/s2mps11.c | 135 ++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 136 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8df0b0e62976..2805b014ae31 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -588,10 +588,10 @@ config REGULATOR_S2MPA01
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
config REGULATOR_S2MPS11
- tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
+ tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
depends on MFD_SEC_CORE
help
- This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
+ This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
output regulator via I2C bus. The chip is comprised of high efficient
Buck converters including Dual-Phase Buck converter, Buck-Boost
converter, various LDOs.
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 72fc3c32db49..b2f3a28e720c 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -32,6 +32,7 @@
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mps15.h>
#include <linux/mfd/samsung/s2mpu02.h>
/* The highest number of possible regulators for supported devices. */
@@ -661,6 +662,133 @@ static const struct regulator_desc s2mps14_regulators[] = {
S2MPS14_BUCK1235_START_SEL),
};
+static struct regulator_ops s2mps15_reg_ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static struct regulator_ops s2mps15_reg_buck_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+#define regulator_desc_s2mps15_ldo(num, range) { \
+ .name = "LDO"#num, \
+ .id = S2MPS15_LDO##num, \
+ .ops = &s2mps15_reg_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .linear_ranges = range, \
+ .n_linear_ranges = ARRAY_SIZE(range), \
+ .n_voltages = S2MPS15_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPS15_REG_L1CTRL + num - 1, \
+ .vsel_mask = S2MPS15_LDO_VSEL_MASK, \
+ .enable_reg = S2MPS15_REG_L1CTRL + num - 1, \
+ .enable_mask = S2MPS15_ENABLE_MASK \
+}
+
+#define regulator_desc_s2mps15_buck(num, range) { \
+ .name = "BUCK"#num, \
+ .id = S2MPS15_BUCK##num, \
+ .ops = &s2mps15_reg_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .linear_ranges = range, \
+ .n_linear_ranges = ARRAY_SIZE(range), \
+ .ramp_delay = 12500, \
+ .n_voltages = S2MPS15_BUCK_N_VOLTAGES, \
+ .vsel_reg = S2MPS15_REG_B1CTRL2 + ((num - 1) * 2), \
+ .vsel_mask = S2MPS15_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPS15_REG_B1CTRL1 + ((num - 1) * 2), \
+ .enable_mask = S2MPS15_ENABLE_MASK \
+}
+
+/* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = {
+ REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000),
+};
+
+/* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = {
+ REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000),
+};
+
+/* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500),
+};
+
+/* voltage range for s2mps15 LDO 7, 8, 9 and 10 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0xc, 0x18, 25000),
+};
+
+/* voltage range for s2mps15 LDO 1 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500),
+};
+
+/* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */
+static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0x20, 0xb0, 6250),
+};
+
+/* voltage range for s2mps15 BUCK 8, 9 and 10 */
+static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = {
+ REGULATOR_LINEAR_RANGE(1000000, 0x20, 0xc0, 12500),
+};
+
+static const struct regulator_desc s2mps15_regulators[] = {
+ regulator_desc_s2mps15_ldo(1, s2mps15_ldo_voltage_ranges5),
+ regulator_desc_s2mps15_ldo(2, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(3, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(4, s2mps15_ldo_voltage_ranges3),
+ regulator_desc_s2mps15_ldo(5, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(6, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(7, s2mps15_ldo_voltage_ranges4),
+ regulator_desc_s2mps15_ldo(8, s2mps15_ldo_voltage_ranges4),
+ regulator_desc_s2mps15_ldo(9, s2mps15_ldo_voltage_ranges4),
+ regulator_desc_s2mps15_ldo(10, s2mps15_ldo_voltage_ranges4),
+ regulator_desc_s2mps15_ldo(11, s2mps15_ldo_voltage_ranges3),
+ regulator_desc_s2mps15_ldo(12, s2mps15_ldo_voltage_ranges3),
+ regulator_desc_s2mps15_ldo(13, s2mps15_ldo_voltage_ranges3),
+ regulator_desc_s2mps15_ldo(14, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(15, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(16, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(17, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(18, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(19, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(20, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(21, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(22, s2mps15_ldo_voltage_ranges3),
+ regulator_desc_s2mps15_ldo(23, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(24, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(25, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(26, s2mps15_ldo_voltage_ranges3),
+ regulator_desc_s2mps15_ldo(27, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_buck(1, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(2, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(3, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(4, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(5, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(6, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(7, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(8, s2mps15_buck_voltage_ranges2),
+ regulator_desc_s2mps15_buck(9, s2mps15_buck_voltage_ranges2),
+ regulator_desc_s2mps15_buck(10, s2mps15_buck_voltage_ranges2),
+};
+
static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
struct regulator_dev *rdev)
{
@@ -974,6 +1102,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
regulators = s2mps14_regulators;
BUILD_BUG_ON(S2MPS_REGULATOR_MAX < s2mps11->rdev_num);
break;
+ case S2MPS15X:
+ s2mps11->rdev_num = ARRAY_SIZE(s2mps15_regulators);
+ regulators = s2mps15_regulators;
+ break;
case S2MPU02:
s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
regulators = s2mpu02_regulators;
@@ -1070,6 +1202,7 @@ static const struct platform_device_id s2mps11_pmic_id[] = {
{ "s2mps11-pmic", S2MPS11X},
{ "s2mps13-pmic", S2MPS13X},
{ "s2mps14-pmic", S2MPS14X},
+ { "s2mps15-regulator", S2MPS15X},
{ "s2mpu02-pmic", S2MPU02},
{ },
};
@@ -1097,5 +1230,5 @@ module_exit(s2mps11_pmic_exit);
/* Module information */
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
-MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPU02 Regulator Driver");
+MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPS15/S2MPU02 Regulator Driver");
MODULE_LICENSE("GPL");
--
1.7.10.4
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 14+ messages in thread* [RESEND PATCH v5 2/3] regulator: s2mps11: add support for S2MPS15 regulators
@ 2015-11-20 10:37 ` Alim Akhtar
0 siblings, 0 replies; 14+ messages in thread
From: Alim Akhtar @ 2015-11-20 10:37 UTC (permalink / raw)
To: lee.jones, broonie
Cc: k.kozlowski, alexandre.belloni, linux-kernel, linux-samsung-soc,
rtc-linux, alim.akhtar, Thomas Abraham
From: Thomas Abraham <thomas.ab@samsung.com>
The S2MPS15 PMIC is similar in functionality to S2MPS11/14 PMIC. It contains
27 LDO and 10 Buck regulators and allows programming these regulators via a
I2C interface. This patch adds initial support for LDO/Buck regulators of
S2MPS15 PMIC.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/regulator/Kconfig | 4 +-
drivers/regulator/s2mps11.c | 135 ++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 136 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8df0b0e62976..2805b014ae31 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -588,10 +588,10 @@ config REGULATOR_S2MPA01
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
config REGULATOR_S2MPS11
- tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
+ tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
depends on MFD_SEC_CORE
help
- This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
+ This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
output regulator via I2C bus. The chip is comprised of high efficient
Buck converters including Dual-Phase Buck converter, Buck-Boost
converter, various LDOs.
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 72fc3c32db49..b2f3a28e720c 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -32,6 +32,7 @@
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mps15.h>
#include <linux/mfd/samsung/s2mpu02.h>
/* The highest number of possible regulators for supported devices. */
@@ -661,6 +662,133 @@ static const struct regulator_desc s2mps14_regulators[] = {
S2MPS14_BUCK1235_START_SEL),
};
+static struct regulator_ops s2mps15_reg_ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static struct regulator_ops s2mps15_reg_buck_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+#define regulator_desc_s2mps15_ldo(num, range) { \
+ .name = "LDO"#num, \
+ .id = S2MPS15_LDO##num, \
+ .ops = &s2mps15_reg_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .linear_ranges = range, \
+ .n_linear_ranges = ARRAY_SIZE(range), \
+ .n_voltages = S2MPS15_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPS15_REG_L1CTRL + num - 1, \
+ .vsel_mask = S2MPS15_LDO_VSEL_MASK, \
+ .enable_reg = S2MPS15_REG_L1CTRL + num - 1, \
+ .enable_mask = S2MPS15_ENABLE_MASK \
+}
+
+#define regulator_desc_s2mps15_buck(num, range) { \
+ .name = "BUCK"#num, \
+ .id = S2MPS15_BUCK##num, \
+ .ops = &s2mps15_reg_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .linear_ranges = range, \
+ .n_linear_ranges = ARRAY_SIZE(range), \
+ .ramp_delay = 12500, \
+ .n_voltages = S2MPS15_BUCK_N_VOLTAGES, \
+ .vsel_reg = S2MPS15_REG_B1CTRL2 + ((num - 1) * 2), \
+ .vsel_mask = S2MPS15_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPS15_REG_B1CTRL1 + ((num - 1) * 2), \
+ .enable_mask = S2MPS15_ENABLE_MASK \
+}
+
+/* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = {
+ REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000),
+};
+
+/* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = {
+ REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000),
+};
+
+/* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500),
+};
+
+/* voltage range for s2mps15 LDO 7, 8, 9 and 10 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0xc, 0x18, 25000),
+};
+
+/* voltage range for s2mps15 LDO 1 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500),
+};
+
+/* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */
+static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0x20, 0xb0, 6250),
+};
+
+/* voltage range for s2mps15 BUCK 8, 9 and 10 */
+static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = {
+ REGULATOR_LINEAR_RANGE(1000000, 0x20, 0xc0, 12500),
+};
+
+static const struct regulator_desc s2mps15_regulators[] = {
+ regulator_desc_s2mps15_ldo(1, s2mps15_ldo_voltage_ranges5),
+ regulator_desc_s2mps15_ldo(2, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(3, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(4, s2mps15_ldo_voltage_ranges3),
+ regulator_desc_s2mps15_ldo(5, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(6, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(7, s2mps15_ldo_voltage_ranges4),
+ regulator_desc_s2mps15_ldo(8, s2mps15_ldo_voltage_ranges4),
+ regulator_desc_s2mps15_ldo(9, s2mps15_ldo_voltage_ranges4),
+ regulator_desc_s2mps15_ldo(10, s2mps15_ldo_voltage_ranges4),
+ regulator_desc_s2mps15_ldo(11, s2mps15_ldo_voltage_ranges3),
+ regulator_desc_s2mps15_ldo(12, s2mps15_ldo_voltage_ranges3),
+ regulator_desc_s2mps15_ldo(13, s2mps15_ldo_voltage_ranges3),
+ regulator_desc_s2mps15_ldo(14, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(15, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(16, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(17, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(18, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(19, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(20, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(21, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(22, s2mps15_ldo_voltage_ranges3),
+ regulator_desc_s2mps15_ldo(23, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_ldo(24, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(25, s2mps15_ldo_voltage_ranges2),
+ regulator_desc_s2mps15_ldo(26, s2mps15_ldo_voltage_ranges3),
+ regulator_desc_s2mps15_ldo(27, s2mps15_ldo_voltage_ranges1),
+ regulator_desc_s2mps15_buck(1, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(2, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(3, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(4, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(5, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(6, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(7, s2mps15_buck_voltage_ranges1),
+ regulator_desc_s2mps15_buck(8, s2mps15_buck_voltage_ranges2),
+ regulator_desc_s2mps15_buck(9, s2mps15_buck_voltage_ranges2),
+ regulator_desc_s2mps15_buck(10, s2mps15_buck_voltage_ranges2),
+};
+
static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
struct regulator_dev *rdev)
{
@@ -974,6 +1102,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
regulators = s2mps14_regulators;
BUILD_BUG_ON(S2MPS_REGULATOR_MAX < s2mps11->rdev_num);
break;
+ case S2MPS15X:
+ s2mps11->rdev_num = ARRAY_SIZE(s2mps15_regulators);
+ regulators = s2mps15_regulators;
+ break;
case S2MPU02:
s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
regulators = s2mpu02_regulators;
@@ -1070,6 +1202,7 @@ static const struct platform_device_id s2mps11_pmic_id[] = {
{ "s2mps11-pmic", S2MPS11X},
{ "s2mps13-pmic", S2MPS13X},
{ "s2mps14-pmic", S2MPS14X},
+ { "s2mps15-regulator", S2MPS15X},
{ "s2mpu02-pmic", S2MPU02},
{ },
};
@@ -1097,5 +1230,5 @@ module_exit(s2mps11_pmic_exit);
/* Module information */
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
-MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPU02 Regulator Driver");
+MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPS15/S2MPU02 Regulator Driver");
MODULE_LICENSE("GPL");
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [rtc-linux] Re: [RESEND PATCH v5 2/3] regulator: s2mps11: add support for S2MPS15 regulators
2015-11-20 10:37 ` Alim Akhtar
@ 2015-11-22 13:24 ` Mark Brown
-1 siblings, 0 replies; 14+ messages in thread
From: Mark Brown @ 2015-11-22 13:24 UTC (permalink / raw)
To: Alim Akhtar
Cc: lee.jones, k.kozlowski, alexandre.belloni, linux-kernel,
linux-samsung-soc, rtc-linux, Thomas Abraham
[-- Attachment #1: Type: text/plain, Size: 922 bytes --]
On Fri, Nov 20, 2015 at 04:07:52PM +0530, Alim Akhtar wrote:
> From: Thomas Abraham <thomas.ab@samsung.com>
>
> The S2MPS15 PMIC is similar in functionality to S2MPS11/14 PMIC. It contains
> 27 LDO and 10 Buck regulators and allows programming these regulators via a
> I2C interface. This patch adds initial support for LDO/Buck regulators of
> S2MPS15 PMIC.
Acked-by: Mark Brown <broonie@kernel.org>
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [RESEND PATCH v5 2/3] regulator: s2mps11: add support for S2MPS15 regulators
@ 2015-11-22 13:24 ` Mark Brown
0 siblings, 0 replies; 14+ messages in thread
From: Mark Brown @ 2015-11-22 13:24 UTC (permalink / raw)
To: Alim Akhtar
Cc: lee.jones, k.kozlowski, alexandre.belloni, linux-kernel,
linux-samsung-soc, rtc-linux, Thomas Abraham
[-- Attachment #1: Type: text/plain, Size: 412 bytes --]
On Fri, Nov 20, 2015 at 04:07:52PM +0530, Alim Akhtar wrote:
> From: Thomas Abraham <thomas.ab@samsung.com>
>
> The S2MPS15 PMIC is similar in functionality to S2MPS11/14 PMIC. It contains
> 27 LDO and 10 Buck regulators and allows programming these regulators via a
> I2C interface. This patch adds initial support for LDO/Buck regulators of
> S2MPS15 PMIC.
Acked-by: Mark Brown <broonie@kernel.org>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* [rtc-linux] [RESEND PATCH v5 3/3] drivers/rtc/rtc-s5m.c: add support for S2MPS15 RTC
2015-11-20 10:37 ` Alim Akhtar
@ 2015-11-20 10:37 ` Alim Akhtar
-1 siblings, 0 replies; 14+ messages in thread
From: Alim Akhtar @ 2015-11-20 10:37 UTC (permalink / raw)
To: lee.jones, broonie
Cc: k.kozlowski, alexandre.belloni, linux-kernel, linux-samsung-soc,
rtc-linux, alim.akhtar
RTC found in s2mps15 is almost same as one found on s2mps13
with few differences in RTC_UPDATE register fields, like:
1> Bit[4] and Bit[1] are reversed
- On s2mps13
WUDR -> bit[4], AUDR -> bit[1]
- On s2mps15
WUDR -> bit[1], AUDR -> bit[4]
2> In case of s2mps13, for alarm register, need to set both
WDUR and ADUR high, whereas for s2mps15 only set AUDR to high.
3> On s2mps15, WUDR, RUDR and AUDR functions should never be used
at the same time.
This patch add required changes to enable s2mps15 rtc timer.
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
drivers/rtc/rtc-s5m.c | 37 +++++++++++++++++++++++++++++++++----
include/linux/mfd/samsung/rtc.h | 2 ++
2 files changed, 35 insertions(+), 4 deletions(-)
diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index f2504b4eef34..0d68a85dd429 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -188,6 +188,7 @@ static inline int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info,
ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val);
val &= S5M_ALARM0_STATUS;
break;
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
ret = regmap_read(info->s5m87xx->regmap_pmic, S2MPS14_REG_ST2,
@@ -219,9 +220,22 @@ static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
return ret;
}
- data |= info->regs->rtc_udr_mask;
- if (info->device_type == S5M8763X || info->device_type == S5M8767X)
- data |= S5M_RTC_TIME_EN_MASK;
+ switch (info->device_type) {
+ case S5M8763X:
+ case S5M8767X:
+ data |= info->regs->rtc_udr_mask | S5M_RTC_TIME_EN_MASK;
+ case S2MPS15X:
+ /* As per UM, for write time register, set WUDR bit to high */
+ data |= S2MPS15_RTC_WUDR_MASK;
+ break;
+ case S2MPS14X:
+ case S2MPS13X:
+ data |= info->regs->rtc_udr_mask;
+ break;
+ default:
+ return -EINVAL;
+ }
+
ret = regmap_write(info->regmap, info->regs->rtc_udr_update, data);
if (ret < 0) {
@@ -252,6 +266,11 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
case S5M8767X:
data &= ~S5M_RTC_TIME_EN_MASK;
break;
+ case S2MPS15X:
+ /* As per UM, for write alarm, set A_UDR(bit[4]) to high
+ * rtc_udr_mask above sets bit[4]
+ */
+ break;
case S2MPS14X:
data |= S2MPS_RTC_RUDR_MASK;
break;
@@ -317,7 +336,8 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
u8 data[info->regs->regs_count];
int ret;
- if (info->device_type == S2MPS14X || info->device_type == S2MPS13X) {
+ if (info->device_type == S2MPS15X || info->device_type == S2MPS14X ||
+ info->device_type == S2MPS13X) {
ret = regmap_update_bits(info->regmap,
info->regs->rtc_udr_update,
S2MPS_RTC_RUDR_MASK, S2MPS_RTC_RUDR_MASK);
@@ -339,6 +359,7 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
s5m8767_data_to_tm(data, tm, info->rtc_24hr_mode);
@@ -366,6 +387,7 @@ static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm)
s5m8763_tm_to_data(tm, data);
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
ret = s5m8767_tm_to_data(tm, data);
@@ -414,6 +436,7 @@ static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
s5m8767_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
@@ -463,6 +486,7 @@ static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
for (i = 0; i < info->regs->regs_count; i++)
@@ -508,6 +532,7 @@ static int s5m_rtc_start_alarm(struct s5m_rtc_info *info)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
data[RTC_SEC] |= ALARM_ENABLE_MASK;
@@ -548,6 +573,7 @@ static int s5m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
s5m8767_tm_to_data(&alrm->time, data);
@@ -631,6 +657,7 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info)
ret = regmap_raw_write(info->regmap, S5M_ALARM0_CONF, data, 2);
break;
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
data[0] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
@@ -679,6 +706,7 @@ static int s5m_rtc_probe(struct platform_device *pdev)
return -ENOMEM;
switch (platform_get_device_id(pdev)->driver_data) {
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
regmap_cfg = &s2mps14_rtc_regmap_config;
@@ -805,6 +833,7 @@ static const struct platform_device_id s5m_rtc_id[] = {
{ "s5m-rtc", S5M8767X },
{ "s2mps13-rtc", S2MPS13X },
{ "s2mps14-rtc", S2MPS14X },
+ { "s2mps15-rtc", S2MPS15X },
{ },
};
MODULE_DEVICE_TABLE(platform, s5m_rtc_id);
diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h
index 29c30ac36020..a65e4655d470 100644
--- a/include/linux/mfd/samsung/rtc.h
+++ b/include/linux/mfd/samsung/rtc.h
@@ -107,6 +107,8 @@ enum s2mps_rtc_reg {
#define S2MPS_RTC_WUDR_MASK (1 << S2MPS_RTC_WUDR_SHIFT)
#define S2MPS13_RTC_AUDR_SHIFT 1
#define S2MPS13_RTC_AUDR_MASK (1 << S2MPS13_RTC_AUDR_SHIFT)
+#define S2MPS15_RTC_WUDR_SHIFT 1
+#define S2MPS15_RTC_WUDR_MASK (1 << S2MPS15_RTC_WUDR_SHIFT)
#define S2MPS_RTC_RUDR_SHIFT 0
#define S2MPS_RTC_RUDR_MASK (1 << S2MPS_RTC_RUDR_SHIFT)
#define RTC_TCON_SHIFT 1
--
1.7.10.4
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 14+ messages in thread* [RESEND PATCH v5 3/3] drivers/rtc/rtc-s5m.c: add support for S2MPS15 RTC
@ 2015-11-20 10:37 ` Alim Akhtar
0 siblings, 0 replies; 14+ messages in thread
From: Alim Akhtar @ 2015-11-20 10:37 UTC (permalink / raw)
To: lee.jones, broonie
Cc: k.kozlowski, alexandre.belloni, linux-kernel, linux-samsung-soc,
rtc-linux, alim.akhtar
RTC found in s2mps15 is almost same as one found on s2mps13
with few differences in RTC_UPDATE register fields, like:
1> Bit[4] and Bit[1] are reversed
- On s2mps13
WUDR -> bit[4], AUDR -> bit[1]
- On s2mps15
WUDR -> bit[1], AUDR -> bit[4]
2> In case of s2mps13, for alarm register, need to set both
WDUR and ADUR high, whereas for s2mps15 only set AUDR to high.
3> On s2mps15, WUDR, RUDR and AUDR functions should never be used
at the same time.
This patch add required changes to enable s2mps15 rtc timer.
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
drivers/rtc/rtc-s5m.c | 37 +++++++++++++++++++++++++++++++++----
include/linux/mfd/samsung/rtc.h | 2 ++
2 files changed, 35 insertions(+), 4 deletions(-)
diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index f2504b4eef34..0d68a85dd429 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -188,6 +188,7 @@ static inline int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info,
ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val);
val &= S5M_ALARM0_STATUS;
break;
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
ret = regmap_read(info->s5m87xx->regmap_pmic, S2MPS14_REG_ST2,
@@ -219,9 +220,22 @@ static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
return ret;
}
- data |= info->regs->rtc_udr_mask;
- if (info->device_type == S5M8763X || info->device_type == S5M8767X)
- data |= S5M_RTC_TIME_EN_MASK;
+ switch (info->device_type) {
+ case S5M8763X:
+ case S5M8767X:
+ data |= info->regs->rtc_udr_mask | S5M_RTC_TIME_EN_MASK;
+ case S2MPS15X:
+ /* As per UM, for write time register, set WUDR bit to high */
+ data |= S2MPS15_RTC_WUDR_MASK;
+ break;
+ case S2MPS14X:
+ case S2MPS13X:
+ data |= info->regs->rtc_udr_mask;
+ break;
+ default:
+ return -EINVAL;
+ }
+
ret = regmap_write(info->regmap, info->regs->rtc_udr_update, data);
if (ret < 0) {
@@ -252,6 +266,11 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
case S5M8767X:
data &= ~S5M_RTC_TIME_EN_MASK;
break;
+ case S2MPS15X:
+ /* As per UM, for write alarm, set A_UDR(bit[4]) to high
+ * rtc_udr_mask above sets bit[4]
+ */
+ break;
case S2MPS14X:
data |= S2MPS_RTC_RUDR_MASK;
break;
@@ -317,7 +336,8 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
u8 data[info->regs->regs_count];
int ret;
- if (info->device_type == S2MPS14X || info->device_type == S2MPS13X) {
+ if (info->device_type == S2MPS15X || info->device_type == S2MPS14X ||
+ info->device_type == S2MPS13X) {
ret = regmap_update_bits(info->regmap,
info->regs->rtc_udr_update,
S2MPS_RTC_RUDR_MASK, S2MPS_RTC_RUDR_MASK);
@@ -339,6 +359,7 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
s5m8767_data_to_tm(data, tm, info->rtc_24hr_mode);
@@ -366,6 +387,7 @@ static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm)
s5m8763_tm_to_data(tm, data);
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
ret = s5m8767_tm_to_data(tm, data);
@@ -414,6 +436,7 @@ static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
s5m8767_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
@@ -463,6 +486,7 @@ static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
for (i = 0; i < info->regs->regs_count; i++)
@@ -508,6 +532,7 @@ static int s5m_rtc_start_alarm(struct s5m_rtc_info *info)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
data[RTC_SEC] |= ALARM_ENABLE_MASK;
@@ -548,6 +573,7 @@ static int s5m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
s5m8767_tm_to_data(&alrm->time, data);
@@ -631,6 +657,7 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info)
ret = regmap_raw_write(info->regmap, S5M_ALARM0_CONF, data, 2);
break;
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
data[0] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
@@ -679,6 +706,7 @@ static int s5m_rtc_probe(struct platform_device *pdev)
return -ENOMEM;
switch (platform_get_device_id(pdev)->driver_data) {
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
regmap_cfg = &s2mps14_rtc_regmap_config;
@@ -805,6 +833,7 @@ static const struct platform_device_id s5m_rtc_id[] = {
{ "s5m-rtc", S5M8767X },
{ "s2mps13-rtc", S2MPS13X },
{ "s2mps14-rtc", S2MPS14X },
+ { "s2mps15-rtc", S2MPS15X },
{ },
};
MODULE_DEVICE_TABLE(platform, s5m_rtc_id);
diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h
index 29c30ac36020..a65e4655d470 100644
--- a/include/linux/mfd/samsung/rtc.h
+++ b/include/linux/mfd/samsung/rtc.h
@@ -107,6 +107,8 @@ enum s2mps_rtc_reg {
#define S2MPS_RTC_WUDR_MASK (1 << S2MPS_RTC_WUDR_SHIFT)
#define S2MPS13_RTC_AUDR_SHIFT 1
#define S2MPS13_RTC_AUDR_MASK (1 << S2MPS13_RTC_AUDR_SHIFT)
+#define S2MPS15_RTC_WUDR_SHIFT 1
+#define S2MPS15_RTC_WUDR_MASK (1 << S2MPS15_RTC_WUDR_SHIFT)
#define S2MPS_RTC_RUDR_SHIFT 0
#define S2MPS_RTC_RUDR_MASK (1 << S2MPS_RTC_RUDR_SHIFT)
#define RTC_TCON_SHIFT 1
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [rtc-linux] Re: [RESEND PATCH v5 0/3] mfd: sec: add S2MPS15 PMIC support
2015-11-20 10:37 ` Alim Akhtar
@ 2015-11-23 14:27 ` Lee Jones
-1 siblings, 0 replies; 14+ messages in thread
From: Lee Jones @ 2015-11-23 14:27 UTC (permalink / raw)
To: Alim Akhtar
Cc: broonie, k.kozlowski, alexandre.belloni, linux-kernel,
linux-samsung-soc, rtc-linux
Mark, Alexandre,
Enjoy!
The following changes since commit 1ec218373b8ebda821aec00bb156a9c94fad9cd4=
:
Linux 4.4-rc2 (2015-11-22 16:45:59 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-reg=
ulator-rtc-v4.5
for you to fetch changes up to a65e5efa7c5faa8c320fe56cc351d47fcd006749:
rtc: s5m.c: Add support for S2MPS15 RTC (2015-11-23 10:34:38 +0000)
----------------------------------------------------------------
Immutable branch between MFD, Regulator and RTC for the v4.5 merge window
----------------------------------------------------------------
Alim Akhtar (1):
rtc: s5m.c: Add support for S2MPS15 RTC
Thomas Abraham (2):
mfd: sec: Add support for S2MPS15 PMIC
regulator: s2mps11: Add support for S2MPS15 regulators
drivers/mfd/sec-core.c | 31 +++++
drivers/mfd/sec-irq.c | 8 ++
drivers/regulator/Kconfig | 4 +-
drivers/regulator/s2mps11.c | 135 +++++++++++++++++-
drivers/rtc/rtc-s5m.c | 37 ++++-
include/linux/mfd/samsung/core.h | 1 +
include/linux/mfd/samsung/rtc.h | 2 +
include/linux/mfd/samsung/s2mps15.h | 158 ++++++++++++++++++++++
8 files changed, 369 insertions(+), 7 deletions(-)
create mode 100644 include/linux/mfd/samsung/s2mps15.h
--=20
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org =E2=94=82 Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--=20
--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [RESEND PATCH v5 0/3] mfd: sec: add S2MPS15 PMIC support
@ 2015-11-23 14:27 ` Lee Jones
0 siblings, 0 replies; 14+ messages in thread
From: Lee Jones @ 2015-11-23 14:27 UTC (permalink / raw)
To: Alim Akhtar
Cc: broonie, k.kozlowski, alexandre.belloni, linux-kernel,
linux-samsung-soc, rtc-linux
Mark, Alexandre,
Enjoy!
The following changes since commit 1ec218373b8ebda821aec00bb156a9c94fad9cd4:
Linux 4.4-rc2 (2015-11-22 16:45:59 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-regulator-rtc-v4.5
for you to fetch changes up to a65e5efa7c5faa8c320fe56cc351d47fcd006749:
rtc: s5m.c: Add support for S2MPS15 RTC (2015-11-23 10:34:38 +0000)
----------------------------------------------------------------
Immutable branch between MFD, Regulator and RTC for the v4.5 merge window
----------------------------------------------------------------
Alim Akhtar (1):
rtc: s5m.c: Add support for S2MPS15 RTC
Thomas Abraham (2):
mfd: sec: Add support for S2MPS15 PMIC
regulator: s2mps11: Add support for S2MPS15 regulators
drivers/mfd/sec-core.c | 31 +++++
drivers/mfd/sec-irq.c | 8 ++
drivers/regulator/Kconfig | 4 +-
drivers/regulator/s2mps11.c | 135 +++++++++++++++++-
drivers/rtc/rtc-s5m.c | 37 ++++-
include/linux/mfd/samsung/core.h | 1 +
include/linux/mfd/samsung/rtc.h | 2 +
include/linux/mfd/samsung/s2mps15.h | 158 ++++++++++++++++++++++
8 files changed, 369 insertions(+), 7 deletions(-)
create mode 100644 include/linux/mfd/samsung/s2mps15.h
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 14+ messages in thread* [rtc-linux] [GIT PULL] Immutable branch between MFD, Regulator and RTC
2015-11-23 14:27 ` Lee Jones
@ 2015-11-23 14:29 ` Lee Jones
-1 siblings, 0 replies; 14+ messages in thread
From: Lee Jones @ 2015-11-23 14:29 UTC (permalink / raw)
To: Alim Akhtar
Cc: broonie, k.kozlowski, alexandre.belloni, linux-kernel,
linux-samsung-soc, rtc-linux
Better $SUBJECT for ya'll -- so it doesn't get lost in the noise.
> Mark, Alexandre,
>=20
> Enjoy!
>=20
> The following changes since commit 1ec218373b8ebda821aec00bb156a9c94fad9c=
d4:
>=20
> Linux 4.4-rc2 (2015-11-22 16:45:59 -0800)
>=20
> are available in the git repository at:
>=20
> git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-r=
egulator-rtc-v4.5
>=20
> for you to fetch changes up to a65e5efa7c5faa8c320fe56cc351d47fcd006749:
>=20
> rtc: s5m.c: Add support for S2MPS15 RTC (2015-11-23 10:34:38 +0000)
>=20
> ----------------------------------------------------------------
> Immutable branch between MFD, Regulator and RTC for the v4.5 merge window
>=20
> ----------------------------------------------------------------
> Alim Akhtar (1):
> rtc: s5m.c: Add support for S2MPS15 RTC
>=20
> Thomas Abraham (2):
> mfd: sec: Add support for S2MPS15 PMIC
> regulator: s2mps11: Add support for S2MPS15 regulators
>=20
> drivers/mfd/sec-core.c | 31 +++++
> drivers/mfd/sec-irq.c | 8 ++
> drivers/regulator/Kconfig | 4 +-
> drivers/regulator/s2mps11.c | 135 +++++++++++++++++-
> drivers/rtc/rtc-s5m.c | 37 ++++-
> include/linux/mfd/samsung/core.h | 1 +
> include/linux/mfd/samsung/rtc.h | 2 +
> include/linux/mfd/samsung/s2mps15.h | 158 ++++++++++++++++++++++
> 8 files changed, 369 insertions(+), 7 deletions(-)
> create mode 100644 include/linux/mfd/samsung/s2mps15.h
>=20
--=20
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org =E2=94=82 Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--=20
--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [GIT PULL] Immutable branch between MFD, Regulator and RTC
@ 2015-11-23 14:29 ` Lee Jones
0 siblings, 0 replies; 14+ messages in thread
From: Lee Jones @ 2015-11-23 14:29 UTC (permalink / raw)
To: Alim Akhtar
Cc: broonie, k.kozlowski, alexandre.belloni, linux-kernel,
linux-samsung-soc, rtc-linux
Better $SUBJECT for ya'll -- so it doesn't get lost in the noise.
> Mark, Alexandre,
>
> Enjoy!
>
> The following changes since commit 1ec218373b8ebda821aec00bb156a9c94fad9cd4:
>
> Linux 4.4-rc2 (2015-11-22 16:45:59 -0800)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-regulator-rtc-v4.5
>
> for you to fetch changes up to a65e5efa7c5faa8c320fe56cc351d47fcd006749:
>
> rtc: s5m.c: Add support for S2MPS15 RTC (2015-11-23 10:34:38 +0000)
>
> ----------------------------------------------------------------
> Immutable branch between MFD, Regulator and RTC for the v4.5 merge window
>
> ----------------------------------------------------------------
> Alim Akhtar (1):
> rtc: s5m.c: Add support for S2MPS15 RTC
>
> Thomas Abraham (2):
> mfd: sec: Add support for S2MPS15 PMIC
> regulator: s2mps11: Add support for S2MPS15 regulators
>
> drivers/mfd/sec-core.c | 31 +++++
> drivers/mfd/sec-irq.c | 8 ++
> drivers/regulator/Kconfig | 4 +-
> drivers/regulator/s2mps11.c | 135 +++++++++++++++++-
> drivers/rtc/rtc-s5m.c | 37 ++++-
> include/linux/mfd/samsung/core.h | 1 +
> include/linux/mfd/samsung/rtc.h | 2 +
> include/linux/mfd/samsung/s2mps15.h | 158 ++++++++++++++++++++++
> 8 files changed, 369 insertions(+), 7 deletions(-)
> create mode 100644 include/linux/mfd/samsung/s2mps15.h
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 14+ messages in thread