All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shengjiu Wang <shengjiu.wang@freescale.com>
To: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	alsa-devel@alsa-project.org, pawel.moll@arm.com,
	ijc+devicetree@hellion.org.uk, linuxppc-dev@lists.ozlabs.org,
	broonie@kernel.org, Xiubo.Lee@gmail.com, timur@tabi.org,
	lgirdwood@gmail.com, robh+dt@kernel.org, galak@codeaurora.org,
	tiwai@suse.com, shawnguo@kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH V3 1/3] ASoC: fsl_esai: spba clock is needed by esai device
Date: Tue, 24 Nov 2015 17:02:58 +0800	[thread overview]
Message-ID: <20151124090256.GA17516@shlinux2> (raw)
In-Reply-To: <20151124083344.GA14109@Asurada-CZ80>

On Tue, Nov 24, 2015 at 12:33:45AM -0800, Nicolin Chen wrote:
> On Tue, Nov 24, 2015 at 03:03:28PM +0800, Shengjiu Wang wrote:
> 
> > @@ -469,6 +471,9 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
> >  	ret = clk_prepare_enable(esai_priv->coreclk);
> >  	if (ret)
> >  		return ret;
> > +	ret = clk_prepare_enable(esai_priv->spbaclk);
> > +	if (ret)
> > +		goto err_spbaclk;
> >  	if (!IS_ERR(esai_priv->extalclk)) {
> >  		ret = clk_prepare_enable(esai_priv->extalclk);
> >  		if (ret)
> 
> Just like for extalclk there is a IS_ERR check out there, there
> should be one for spbaclk as well. Otherwise....
> 
> root@imx6qdlsolo:~# aplay /unit_tests/audio8k16S.wav 
> [   29.956250] Unable to handle kernel paging request at virtual address fffffffe
> [   29.963491] pgd = edd98000
> [   29.966278] [fffffffe] *pgd=afffd861, *pte=00000000, *ppte=00000000
> [   29.972615] Internal error: Oops: 37 [#1] SMP ARM
> [   29.977327] Modules linked in:
> [   29.980410] CPU: 0 PID: 755 Comm: aplay Not tainted 4.4.0-rc1-12414-gcc8db17 #250
> [   29.987899] Hardware name: Freescale i.MX6 SoloX (Device Tree)
> [   29.993738] task: edece780 ti: ed26a000 task.ti: ed26a000
> [   29.999156] PC is at clk_prepare+0x18/0x38
> [   30.003268] LR is at mark_held_locks+0x70/0x98
> [   30.007720] pc : [<c0568714>]    lr : [<c006f42c>]    psr: 600f0013
> [   30.007720] sp : ed26bc60  ip : 00000003  fp : ed26bc74
> [   30.019204] r10: eebe4d9c  r9 : eeb2e00c  r8 : eeb2e00c
> [   30.024435] r7 : fffffffe  r6 : eeb2c500  r5 : eeb2d0c0  r4 : fffffffe
> [   30.030966] r3 : edece780  r2 : 00000001  r1 : 00000001  r0 : 00000001
> [   30.037502] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
> [   30.044643] Control: 10c5387d  Table: add9804a  DAC: 00000051
> [   30.050395] Process aplay (pid: 755, stack limit = 0xed26a210)
>

Will fix it in next version, and send it out later.

best regards
wang shengjiu 

WARNING: multiple messages have this Message-ID (diff)
From: Shengjiu Wang <shengjiu.wang@freescale.com>
To: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: <robh+dt@kernel.org>, <pawel.moll@arm.com>,
	<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
	<galak@codeaurora.org>, <timur@tabi.org>, <Xiubo.Lee@gmail.com>,
	<lgirdwood@gmail.com>, <broonie@kernel.org>, <perex@perex.cz>,
	<tiwai@suse.com>, <shawnguo@kernel.org>,
	<alsa-devel@alsa-project.org>, <linuxppc-dev@lists.ozlabs.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: Re: [PATCH V3 1/3] ASoC: fsl_esai: spba clock is needed by esai device
Date: Tue, 24 Nov 2015 17:02:58 +0800	[thread overview]
Message-ID: <20151124090256.GA17516@shlinux2> (raw)
In-Reply-To: <20151124083344.GA14109@Asurada-CZ80>

On Tue, Nov 24, 2015 at 12:33:45AM -0800, Nicolin Chen wrote:
> On Tue, Nov 24, 2015 at 03:03:28PM +0800, Shengjiu Wang wrote:
> 
> > @@ -469,6 +471,9 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
> >  	ret = clk_prepare_enable(esai_priv->coreclk);
> >  	if (ret)
> >  		return ret;
> > +	ret = clk_prepare_enable(esai_priv->spbaclk);
> > +	if (ret)
> > +		goto err_spbaclk;
> >  	if (!IS_ERR(esai_priv->extalclk)) {
> >  		ret = clk_prepare_enable(esai_priv->extalclk);
> >  		if (ret)
> 
> Just like for extalclk there is a IS_ERR check out there, there
> should be one for spbaclk as well. Otherwise....
> 
> root@imx6qdlsolo:~# aplay /unit_tests/audio8k16S.wav 
> [   29.956250] Unable to handle kernel paging request at virtual address fffffffe
> [   29.963491] pgd = edd98000
> [   29.966278] [fffffffe] *pgd=afffd861, *pte=00000000, *ppte=00000000
> [   29.972615] Internal error: Oops: 37 [#1] SMP ARM
> [   29.977327] Modules linked in:
> [   29.980410] CPU: 0 PID: 755 Comm: aplay Not tainted 4.4.0-rc1-12414-gcc8db17 #250
> [   29.987899] Hardware name: Freescale i.MX6 SoloX (Device Tree)
> [   29.993738] task: edece780 ti: ed26a000 task.ti: ed26a000
> [   29.999156] PC is at clk_prepare+0x18/0x38
> [   30.003268] LR is at mark_held_locks+0x70/0x98
> [   30.007720] pc : [<c0568714>]    lr : [<c006f42c>]    psr: 600f0013
> [   30.007720] sp : ed26bc60  ip : 00000003  fp : ed26bc74
> [   30.019204] r10: eebe4d9c  r9 : eeb2e00c  r8 : eeb2e00c
> [   30.024435] r7 : fffffffe  r6 : eeb2c500  r5 : eeb2d0c0  r4 : fffffffe
> [   30.030966] r3 : edece780  r2 : 00000001  r1 : 00000001  r0 : 00000001
> [   30.037502] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
> [   30.044643] Control: 10c5387d  Table: add9804a  DAC: 00000051
> [   30.050395] Process aplay (pid: 755, stack limit = 0xed26a210)
>

Will fix it in next version, and send it out later.

best regards
wang shengjiu 

  reply	other threads:[~2015-11-24  9:06 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-24  7:03 [PATCH V3 0/3] add spba clock for fsl audio IP Shengjiu Wang
2015-11-24  7:03 ` Shengjiu Wang
2015-11-24  7:03 ` [PATCH V3 1/3] ASoC: fsl_esai: spba clock is needed by esai device Shengjiu Wang
2015-11-24  7:03   ` Shengjiu Wang
     [not found]   ` <37808c01df126622c41c2d413fddf838dc2aa71d.1448348336.git.shengjiu.wang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-11-24  8:33     ` Nicolin Chen
2015-11-24  8:33       ` Nicolin Chen
2015-11-24  9:02       ` Shengjiu Wang [this message]
2015-11-24  9:02         ` Shengjiu Wang
2015-11-24 23:21     ` Rob Herring
2015-11-24 23:21       ` Rob Herring
2015-11-25  2:02       ` Shengjiu Wang
2015-11-25  2:02         ` Shengjiu Wang
     [not found] ` <cover.1448348336.git.shengjiu.wang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-11-24  7:03   ` [PATCH V3 2/3] ASoC: fsl_spdif: spba clk is needed by spdif device Shengjiu Wang
2015-11-24  7:03     ` Shengjiu Wang
     [not found]     ` <6f03afc87c7958b975df66b163c1186be979afb6.1448348336.git.shengjiu.wang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-11-24 23:23       ` Rob Herring
2015-11-24 23:23         ` Rob Herring
2015-11-24  7:03 ` [PATCH V3 3/3] ASoC: fsl_asrc: spba clock is needed by asrc device Shengjiu Wang
2015-11-24  7:03   ` Shengjiu Wang
     [not found]   ` <40629d5e0c3509afe27877874d225d5cd3cde261.1448348336.git.shengjiu.wang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-11-24 23:24     ` Rob Herring
2015-11-24 23:24       ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151124090256.GA17516@shlinux2 \
    --to=shengjiu.wang@freescale.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mark.rutland@arm.com \
    --cc=nicoleotsuka@gmail.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=timur@tabi.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.