[PATCH] arm64: dts: berlin4ct: support cpuidle-dt

[lorenzo.pieralisi@arm.com (Lorenzo Pieralisi)]

On Mon, Nov 30, 2015 at 09:41:58PM +0800, Jisheng Zhang wrote:
> This patch adds an idle-states node to describe the berlin4ct idle
> states and also adds references to the idle-states node in all CPU
> nodes. After this patch cpuidle is enabled.
> 
> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> ---
>  arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

> 
> diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> index 39d0676..3649cea 100644
> --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> @@ -69,6 +69,7 @@
>  			device_type = "cpu";
>  			reg = <0x0>;
>  			enable-method = "psci";
> +			cpu-idle-states = <&CPU_SLEEP_0>;
>  		};
>  
>  		cpu1: cpu at 1 {
> @@ -76,6 +77,7 @@
>  			device_type = "cpu";
>  			reg = <0x1>;
>  			enable-method = "psci";
> +			cpu-idle-states = <&CPU_SLEEP_0>;
>  		};
>  
>  		cpu2: cpu at 2 {
> @@ -83,6 +85,7 @@
>  			device_type = "cpu";
>  			reg = <0x2>;
>  			enable-method = "psci";
> +			cpu-idle-states = <&CPU_SLEEP_0>;
>  		};
>  
>  		cpu3: cpu at 3 {
> @@ -90,6 +93,19 @@
>  			device_type = "cpu";
>  			reg = <0x3>;
>  			enable-method = "psci";
> +			cpu-idle-states = <&CPU_SLEEP_0>;
> +		};
> +
> +		idle-states {
> +			entry-method = "psci";
> +			CPU_SLEEP_0: cpu-sleep-0 {
> +				compatible = "arm,idle-state";
> +				local-timer-stop;
> +				arm,psci-suspend-param = <0x0010000>;
> +				entry-latency-us = <75>;
> +				exit-latency-us = <155>;
> +				min-residency-us = <1000>;
> +			};
>  		};
>  	};
>  
> -- 
> 2.6.2
>