From: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
To: Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org>
Cc: t-kristo-l0cyMroinI0@public.gmane.org,
nsekhar-l0cyMroinI0@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Subject: Re: [4.4-rc][PATCH v2] ARM: dts: am4372: fix clock source for arm twd and global timers
Date: Thu, 3 Dec 2015 08:35:51 -0800 [thread overview]
Message-ID: <20151203163551.GQ23396@atomide.com> (raw)
In-Reply-To: <1448898998-32749-1-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
* Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org> [151130 07:58]:
> ARM TWD and Global timer are clocked by PERIPHCLK which is MPU_CLK/2.
> But now they are clocked by dpll_mpu_m2_ck == MPU_CLK and, as result.
> Timekeeping core misbehaves. For example, execution of command
> "sleep 5" will take 10 sec instead of 5.
>
> Hence, fix it by adding mpu_periphclk ("fixed-factor-clock") and use
> it for clocking ARM TWD and Global timer (same way as on OMAP4).
>
> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> Cc: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
> Cc: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>
> Fixes:commit 8cbd4c2f6a99 ("arm: boot: dts: am4372: add ARM timers and SCU nodes")
> Signed-off-by: Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org>
Is this fix alone enough or do you still need to disable other the ARM
timers in the board specific dts file?
Regards,
Tony
> ---
> Changes in v2:
> - fix: mpu_periphclk should be clocked from dpll_mpu_m2_ck instead of
> dpll_mpu_ck.
> link on v1:
> http://www.spinics.net/lists/arm-kernel/msg463898.html
>
> arch/arm/boot/dts/am4372.dtsi | 4 ++--
> arch/arm/boot/dts/am43xx-clocks.dtsi | 8 ++++++++
> 2 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index d83ff9c..de8791a 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -74,7 +74,7 @@
> reg = <0x48240200 0x100>;
> interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-parent = <&gic>;
> - clocks = <&dpll_mpu_m2_ck>;
> + clocks = <&mpu_periphclk>;
> };
>
> local_timer: timer@48240600 {
> @@ -82,7 +82,7 @@
> reg = <0x48240600 0x100>;
> interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-parent = <&gic>;
> - clocks = <&dpll_mpu_m2_ck>;
> + clocks = <&mpu_periphclk>;
> };
>
> l2-cache-controller@48242000 {
> diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
> index cc88728..a38af2b 100644
> --- a/arch/arm/boot/dts/am43xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
> @@ -259,6 +259,14 @@
> ti,invert-autoidle-bit;
> };
>
> + mpu_periphclk: mpu_periphclk {
> + #clock-cells = <0>;
> + compatible = "fixed-factor-clock";
> + clocks = <&dpll_mpu_m2_ck>;
> + clock-mult = <1>;
> + clock-div = <2>;
> + };
> +
> dpll_ddr_ck: dpll_ddr_ck {
> #clock-cells = <0>;
> compatible = "ti,am3-dpll-clock";
> --
> 2.6.3
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [4.4-rc][PATCH v2] ARM: dts: am4372: fix clock source for arm twd and global timers
Date: Thu, 3 Dec 2015 08:35:51 -0800 [thread overview]
Message-ID: <20151203163551.GQ23396@atomide.com> (raw)
In-Reply-To: <1448898998-32749-1-git-send-email-grygorii.strashko@ti.com>
* Grygorii Strashko <grygorii.strashko@ti.com> [151130 07:58]:
> ARM TWD and Global timer are clocked by PERIPHCLK which is MPU_CLK/2.
> But now they are clocked by dpll_mpu_m2_ck == MPU_CLK and, as result.
> Timekeeping core misbehaves. For example, execution of command
> "sleep 5" will take 10 sec instead of 5.
>
> Hence, fix it by adding mpu_periphclk ("fixed-factor-clock") and use
> it for clocking ARM TWD and Global timer (same way as on OMAP4).
>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Felipe Balbi <balbi@ti.com>
> Cc: Tero Kristo <t-kristo@ti.com>
> Fixes:commit 8cbd4c2f6a99 ("arm: boot: dts: am4372: add ARM timers and SCU nodes")
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Is this fix alone enough or do you still need to disable other the ARM
timers in the board specific dts file?
Regards,
Tony
> ---
> Changes in v2:
> - fix: mpu_periphclk should be clocked from dpll_mpu_m2_ck instead of
> dpll_mpu_ck.
> link on v1:
> http://www.spinics.net/lists/arm-kernel/msg463898.html
>
> arch/arm/boot/dts/am4372.dtsi | 4 ++--
> arch/arm/boot/dts/am43xx-clocks.dtsi | 8 ++++++++
> 2 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index d83ff9c..de8791a 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -74,7 +74,7 @@
> reg = <0x48240200 0x100>;
> interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-parent = <&gic>;
> - clocks = <&dpll_mpu_m2_ck>;
> + clocks = <&mpu_periphclk>;
> };
>
> local_timer: timer at 48240600 {
> @@ -82,7 +82,7 @@
> reg = <0x48240600 0x100>;
> interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-parent = <&gic>;
> - clocks = <&dpll_mpu_m2_ck>;
> + clocks = <&mpu_periphclk>;
> };
>
> l2-cache-controller at 48242000 {
> diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
> index cc88728..a38af2b 100644
> --- a/arch/arm/boot/dts/am43xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
> @@ -259,6 +259,14 @@
> ti,invert-autoidle-bit;
> };
>
> + mpu_periphclk: mpu_periphclk {
> + #clock-cells = <0>;
> + compatible = "fixed-factor-clock";
> + clocks = <&dpll_mpu_m2_ck>;
> + clock-mult = <1>;
> + clock-div = <2>;
> + };
> +
> dpll_ddr_ck: dpll_ddr_ck {
> #clock-cells = <0>;
> compatible = "ti,am3-dpll-clock";
> --
> 2.6.3
>
next prev parent reply other threads:[~2015-12-03 16:35 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-30 15:56 [4.4-rc][PATCH v2] ARM: dts: am4372: fix clock source for arm twd and global timers Grygorii Strashko
2015-11-30 15:56 ` Grygorii Strashko
[not found] ` <1448898998-32749-1-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2015-12-03 16:35 ` Tony Lindgren [this message]
2015-12-03 16:35 ` Tony Lindgren
[not found] ` <20151203163551.GQ23396-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-12-03 18:04 ` Grygorii Strashko
2015-12-03 18:04 ` Grygorii Strashko
[not found] ` <5660843E.3000801-l0cyMroinI0@public.gmane.org>
2015-12-08 17:41 ` Grygorii Strashko
2015-12-08 17:41 ` Grygorii Strashko
2015-12-08 18:03 ` Felipe Balbi
2015-12-08 18:03 ` Felipe Balbi
[not found] ` <87wpsolsvo.fsf-HgARHv6XitJaoMGHk7MhZQC/G2K4zDHf@public.gmane.org>
2015-12-10 0:47 ` Tony Lindgren
2015-12-10 0:47 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151203163551.GQ23396@atomide.com \
--to=tony-4v6ys6ai5vpbdgjk7y7tuq@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=grygorii.strashko-l0cyMroinI0@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=nsekhar-l0cyMroinI0@public.gmane.org \
--cc=t-kristo-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.