[PATCH v3 0/5] Fix a trivial typo and support rk3228/rk3399 SoCs for thermal driver.

[PATCH v3 0/5] Fix a trivial typo and support rk3228/rk3399 SoCs for thermal driver.

[Caesar Wang]

This series pacthes to support the next soc for this thermal driver.
I don't add the dts thermal data since these SoCs have *_not_* land
in this mainline. I believe these SoCs dts will land in this mainline
lately,
then I will add the thermal data for Heiko.

This series patches can apply into Eduardo branch.
https://git.kernel.org/cgit/linux/kernel/git/evalenti/linux-soc-thermal.git

Also, this series pacthes have built on github branch.
https://github.com/rockchip-linux/kernel/commits/develop4.4

PATCH[1/5]:
That's bit ugly typo, sorry for sending again :(.

PATCH[2/5]:
To fix a build warning came from Dan Carpenter report smatch check,
Thanks. :)

PATCH[3/5]:
Add the rk3228/rk3399 SoCs compatible for dt-bindings.

PATCH[4/5]:
Add the rk3228 SoCs for thermal driver.

PATCH[5/5]:
Add the rk3399 SoCs for thermal driver based on PATCH[4/5].

I'd appreciate if someone have free time to review that. :)


Changes in v3:
- As Brian comments on https://patchwork.kernel.org/patch/7580661/,
  let's remove the impossible condition.

Changes in v2:
- As Heiko comments, move to documenting the fields in the header
  instead of inside the table.

Changes in v1:
- Search more trivial typo for me.
- As Heiko comments, fix a copy incorrect name.
- Add a Acked from Rob.
- fix a irq ack is similar with RK3228 SoCs.

Caesar Wang (5):
  thermal: rockchip: fix a trivial typo
  thermal: rockchip: fix a impossible condition caused by the warning
  dt-bindings: rockchip-thermal: Support the RK3228/RK3399 SoCs
    compatible
  thermal: rockchip: Support the RK3228 SoCs in thermal driver
  thermal: rockchip: Support the RK3399 SoCs in thermal driver

 .../bindings/thermal/rockchip-thermal.txt          |   2 +
 drivers/thermal/rockchip_thermal.c                 | 178 ++++++++++++++++++---
 2 files changed, 162 insertions(+), 18 deletions(-)

-- 
1.9.1

[PATCH v3 0/5] Fix a trivial typo and support rk3228/rk3399 SoCs for thermal driver.

[Caesar Wang]

This series pacthes to support the next soc for this thermal driver.
I don't add the dts thermal data since these SoCs have *_not_* land
in this mainline. I believe these SoCs dts will land in this mainline
lately,
then I will add the thermal data for Heiko.

This series patches can apply into Eduardo branch.
https://git.kernel.org/cgit/linux/kernel/git/evalenti/linux-soc-thermal.git

Also, this series pacthes have built on github branch.
https://github.com/rockchip-linux/kernel/commits/develop4.4

PATCH[1/5]:
That's bit ugly typo, sorry for sending again :(.

PATCH[2/5]:
To fix a build warning came from Dan Carpenter report smatch check,
Thanks. :)

PATCH[3/5]:
Add the rk3228/rk3399 SoCs compatible for dt-bindings.

PATCH[4/5]:
Add the rk3228 SoCs for thermal driver.

PATCH[5/5]:
Add the rk3399 SoCs for thermal driver based on PATCH[4/5].

I'd appreciate if someone have free time to review that. :)


Changes in v3:
- As Brian comments on https://patchwork.kernel.org/patch/7580661/,
  let's remove the impossible condition.

Changes in v2:
- As Heiko comments, move to documenting the fields in the header
  instead of inside the table.

Changes in v1:
- Search more trivial typo for me.
- As Heiko comments, fix a copy incorrect name.
- Add a Acked from Rob.
- fix a irq ack is similar with RK3228 SoCs.

Caesar Wang (5):
  thermal: rockchip: fix a trivial typo
  thermal: rockchip: fix a impossible condition caused by the warning
  dt-bindings: rockchip-thermal: Support the RK3228/RK3399 SoCs
    compatible
  thermal: rockchip: Support the RK3228 SoCs in thermal driver
  thermal: rockchip: Support the RK3399 SoCs in thermal driver

 .../bindings/thermal/rockchip-thermal.txt          |   2 +
 drivers/thermal/rockchip_thermal.c                 | 178 ++++++++++++++++++---
 2 files changed, 162 insertions(+), 18 deletions(-)

-- 
1.9.1

[PATCH v3 0/5] Fix a trivial typo and support rk3228/rk3399 SoCs for thermal driver.

[Caesar Wang]

This series pacthes to support the next soc for this thermal driver.
I don't add the dts thermal data since these SoCs have *_not_* land
in this mainline. I believe these SoCs dts will land in this mainline
lately,
then I will add the thermal data for Heiko.

This series patches can apply into Eduardo branch.
https://git.kernel.org/cgit/linux/kernel/git/evalenti/linux-soc-thermal.git

Also, this series pacthes have built on github branch.
https://github.com/rockchip-linux/kernel/commits/develop4.4

PATCH[1/5]:
That's bit ugly typo, sorry for sending again :(.

PATCH[2/5]:
To fix a build warning came from Dan Carpenter report smatch check,
Thanks. :)

PATCH[3/5]:
Add the rk3228/rk3399 SoCs compatible for dt-bindings.

PATCH[4/5]:
Add the rk3228 SoCs for thermal driver.

PATCH[5/5]:
Add the rk3399 SoCs for thermal driver based on PATCH[4/5].

I'd appreciate if someone have free time to review that. :)


Changes in v3:
- As Brian comments on https://patchwork.kernel.org/patch/7580661/,
  let's remove the impossible condition.

Changes in v2:
- As Heiko comments, move to documenting the fields in the header
  instead of inside the table.

Changes in v1:
- Search more trivial typo for me.
- As Heiko comments, fix a copy incorrect name.
- Add a Acked from Rob.
- fix a irq ack is similar with RK3228 SoCs.

Caesar Wang (5):
  thermal: rockchip: fix a trivial typo
  thermal: rockchip: fix a impossible condition caused by the warning
  dt-bindings: rockchip-thermal: Support the RK3228/RK3399 SoCs
    compatible
  thermal: rockchip: Support the RK3228 SoCs in thermal driver
  thermal: rockchip: Support the RK3399 SoCs in thermal driver

 .../bindings/thermal/rockchip-thermal.txt          |   2 +
 drivers/thermal/rockchip_thermal.c                 | 178 ++++++++++++++++++---
 2 files changed, 162 insertions(+), 18 deletions(-)

-- 
1.9.1

[PATCH v3 2/5] thermal: rockchip: fix a impossible condition caused by the warning

[Caesar Wang]

As the Dan report the smatch check the thermal driver warning:
drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
(s32min-s32max > s32max)'

Let's we remove the imposssible condition Since the Temperature is
currently represented as int not long in the thermal driver.

Fixes: commit 437df2172e8d
("thermal: rockchip: consistently use int for temperatures")

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

---

Changes in v3:
- As Brian comments on https://patchwork.kernel.org/patch/7580661/,
  let's remove the impossible condition.

Changes in v2: None
Changes in v1: None

 drivers/thermal/rockchip_thermal.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index ae796ec..611de00 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -549,12 +549,6 @@ static int rockchip_configure_from_dt(struct device *dev,
 		thermal->tshut_temp = shut_temp;
 	}
 
-	if (thermal->tshut_temp > INT_MAX) {
-		dev_err(dev, "Invalid tshut temperature specified: %d\n",
-			thermal->tshut_temp);
-		return -ERANGE;
-	}
-
 	if (of_property_read_u32(np, "rockchip,hw-tshut-mode", &tshut_mode)) {
 		dev_warn(dev,
 			 "Missing tshut mode property, using default (%s)\n",
-- 
1.9.1

[PATCH v3 2/5] thermal: rockchip: fix a impossible condition caused by the warning

[Caesar Wang]

As the Dan report the smatch check the thermal driver warning:
drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
(s32min-s32max > s32max)'

Let's we remove the imposssible condition Since the Temperature is
currently represented as int not long in the thermal driver.

Fixes: commit 437df2172e8d
("thermal: rockchip: consistently use int for temperatures")

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

---

Changes in v3:
- As Brian comments on https://patchwork.kernel.org/patch/7580661/,
  let's remove the impossible condition.

Changes in v2: None
Changes in v1: None

 drivers/thermal/rockchip_thermal.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index ae796ec..611de00 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -549,12 +549,6 @@ static int rockchip_configure_from_dt(struct device *dev,
 		thermal->tshut_temp = shut_temp;
 	}
 
-	if (thermal->tshut_temp > INT_MAX) {
-		dev_err(dev, "Invalid tshut temperature specified: %d\n",
-			thermal->tshut_temp);
-		return -ERANGE;
-	}
-
 	if (of_property_read_u32(np, "rockchip,hw-tshut-mode", &tshut_mode)) {
 		dev_warn(dev,
 			 "Missing tshut mode property, using default (%s)\n",
-- 
1.9.1

Re: [PATCH v3 2/5] thermal: rockchip: fix a impossible condition caused by the warning

[Dmitry Torokhov]

On Thu, Dec 03, 2015 at 04:48:40PM +0800, Caesar Wang wrote:
> As the Dan report the smatch check the thermal driver warning:
> drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
> warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
> (s32min-s32max > s32max)'
> 
> Let's we remove the imposssible condition Since the Temperature is
> currently represented as int not long in the thermal driver.
> 
> Fixes: commit 437df2172e8d
> ("thermal: rockchip: consistently use int for temperatures")
> 
> Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> 
> ---
> 
> Changes in v3:
> - As Brian comments on https://patchwork.kernel.org/patch/7580661/,
>   let's remove the impossible condition.
> 
> Changes in v2: None
> Changes in v1: None
> 
>  drivers/thermal/rockchip_thermal.c | 6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> index ae796ec..611de00 100644
> --- a/drivers/thermal/rockchip_thermal.c
> +++ b/drivers/thermal/rockchip_thermal.c
> @@ -549,12 +549,6 @@ static int rockchip_configure_from_dt(struct device *dev,
>  		thermal->tshut_temp = shut_temp;
>  	}
>  
> -	if (thermal->tshut_temp > INT_MAX) {
> -		dev_err(dev, "Invalid tshut temperature specified: %d\n",
> -			thermal->tshut_temp);
> -		return -ERANGE;
> -	}

Well, that is not entirely correct. The value that we read from DT is
u32, but we convert it down to int. I believe you want to move the check
up so that you do:

	} else if (tshut_temp > INT_MAX) {
		dev_err(dev, "Invalid tshut temperature specified: %d\n",
			thermal->tshut_temp);
		return -ERANGE;
	} else {
		thermal->tshut_temp = shut_temp;
	}

Thanks.

-- 
Dmitry

[PATCH v3 2/5] thermal: rockchip: fix a impossible condition caused by the warning

[Dmitry Torokhov]

On Thu, Dec 03, 2015 at 04:48:40PM +0800, Caesar Wang wrote:
> As the Dan report the smatch check the thermal driver warning:
> drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
> warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
> (s32min-s32max > s32max)'
> 
> Let's we remove the imposssible condition Since the Temperature is
> currently represented as int not long in the thermal driver.
> 
> Fixes: commit 437df2172e8d
> ("thermal: rockchip: consistently use int for temperatures")
> 
> Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> 
> ---
> 
> Changes in v3:
> - As Brian comments on https://patchwork.kernel.org/patch/7580661/,
>   let's remove the impossible condition.
> 
> Changes in v2: None
> Changes in v1: None
> 
>  drivers/thermal/rockchip_thermal.c | 6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> index ae796ec..611de00 100644
> --- a/drivers/thermal/rockchip_thermal.c
> +++ b/drivers/thermal/rockchip_thermal.c
> @@ -549,12 +549,6 @@ static int rockchip_configure_from_dt(struct device *dev,
>  		thermal->tshut_temp = shut_temp;
>  	}
>  
> -	if (thermal->tshut_temp > INT_MAX) {
> -		dev_err(dev, "Invalid tshut temperature specified: %d\n",
> -			thermal->tshut_temp);
> -		return -ERANGE;
> -	}

Well, that is not entirely correct. The value that we read from DT is
u32, but we convert it down to int. I believe you want to move the check
up so that you do:

	} else if (tshut_temp > INT_MAX) {
		dev_err(dev, "Invalid tshut temperature specified: %d\n",
			thermal->tshut_temp);
		return -ERANGE;
	} else {
		thermal->tshut_temp = shut_temp;
	}

Thanks.

-- 
Dmitry

Re: [PATCH v3 2/5] thermal: rockchip: fix a impossible condition caused by the warning

[Brian Norris]

On Thu, Dec 03, 2015 at 12:19:08PM -0800, Dmitry Torokhov wrote:
> On Thu, Dec 03, 2015 at 04:48:40PM +0800, Caesar Wang wrote:
> > As the Dan report the smatch check the thermal driver warning:
> > drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
> > warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
> > (s32min-s32max > s32max)'
> > 
> > Let's we remove the imposssible condition Since the Temperature is
> > currently represented as int not long in the thermal driver.
> > 
> > Fixes: commit 437df2172e8d
> > ("thermal: rockchip: consistently use int for temperatures")
> > 
> > Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
> > Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> > 
> > ---
> > 
> > Changes in v3:
> > - As Brian comments on https://patchwork.kernel.org/patch/7580661/,
> >   let's remove the impossible condition.
> > 
> > Changes in v2: None
> > Changes in v1: None
> > 
> >  drivers/thermal/rockchip_thermal.c | 6 ------
> >  1 file changed, 6 deletions(-)
> > 
> > diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> > index ae796ec..611de00 100644
> > --- a/drivers/thermal/rockchip_thermal.c
> > +++ b/drivers/thermal/rockchip_thermal.c
> > @@ -549,12 +549,6 @@ static int rockchip_configure_from_dt(struct device *dev,
> >  		thermal->tshut_temp = shut_temp;
> >  	}
> >  
> > -	if (thermal->tshut_temp > INT_MAX) {
> > -		dev_err(dev, "Invalid tshut temperature specified: %d\n",
> > -			thermal->tshut_temp);
> > -		return -ERANGE;
> > -	}
> 
> Well, that is not entirely correct. The value that we read from DT is
> u32, but we convert it down to int. I believe you want to move the check

Do we really account for the possibility of sizeof(int) < sizeof(u32)?

EDIT: A bit after writing the above line, I notice my error, but in case
anyone else is thinking the same thing... I guess you're referring to
the sign bit, since we're casting unsigned to signed.

Brian

> up so that you do:
> 
> 	} else if (tshut_temp > INT_MAX) {
> 		dev_err(dev, "Invalid tshut temperature specified: %d\n",
> 			thermal->tshut_temp);
> 		return -ERANGE;
> 	} else {
> 		thermal->tshut_temp = shut_temp;
> 	}
> 
> Thanks.

[PATCH v3 2/5] thermal: rockchip: fix a impossible condition caused by the warning

[Brian Norris]

On Thu, Dec 03, 2015 at 12:19:08PM -0800, Dmitry Torokhov wrote:
> On Thu, Dec 03, 2015 at 04:48:40PM +0800, Caesar Wang wrote:
> > As the Dan report the smatch check the thermal driver warning:
> > drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
> > warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
> > (s32min-s32max > s32max)'
> > 
> > Let's we remove the imposssible condition Since the Temperature is
> > currently represented as int not long in the thermal driver.
> > 
> > Fixes: commit 437df2172e8d
> > ("thermal: rockchip: consistently use int for temperatures")
> > 
> > Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
> > Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> > 
> > ---
> > 
> > Changes in v3:
> > - As Brian comments on https://patchwork.kernel.org/patch/7580661/,
> >   let's remove the impossible condition.
> > 
> > Changes in v2: None
> > Changes in v1: None
> > 
> >  drivers/thermal/rockchip_thermal.c | 6 ------
> >  1 file changed, 6 deletions(-)
> > 
> > diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> > index ae796ec..611de00 100644
> > --- a/drivers/thermal/rockchip_thermal.c
> > +++ b/drivers/thermal/rockchip_thermal.c
> > @@ -549,12 +549,6 @@ static int rockchip_configure_from_dt(struct device *dev,
> >  		thermal->tshut_temp = shut_temp;
> >  	}
> >  
> > -	if (thermal->tshut_temp > INT_MAX) {
> > -		dev_err(dev, "Invalid tshut temperature specified: %d\n",
> > -			thermal->tshut_temp);
> > -		return -ERANGE;
> > -	}
> 
> Well, that is not entirely correct. The value that we read from DT is
> u32, but we convert it down to int. I believe you want to move the check

Do we really account for the possibility of sizeof(int) < sizeof(u32)?

EDIT: A bit after writing the above line, I notice my error, but in case
anyone else is thinking the same thing... I guess you're referring to
the sign bit, since we're casting unsigned to signed.

Brian

> up so that you do:
> 
> 	} else if (tshut_temp > INT_MAX) {
> 		dev_err(dev, "Invalid tshut temperature specified: %d\n",
> 			thermal->tshut_temp);
> 		return -ERANGE;
> 	} else {
> 		thermal->tshut_temp = shut_temp;
> 	}
> 
> Thanks.

Re: [PATCH v3 2/5] thermal: rockchip: fix a impossible condition caused by the warning

[Dmitry Torokhov]

On Thu, Dec 03, 2015 at 12:33:57PM -0800, Brian Norris wrote:
> On Thu, Dec 03, 2015 at 12:19:08PM -0800, Dmitry Torokhov wrote:
> > On Thu, Dec 03, 2015 at 04:48:40PM +0800, Caesar Wang wrote:
> > > As the Dan report the smatch check the thermal driver warning:
> > > drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
> > > warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
> > > (s32min-s32max > s32max)'
> > > 
> > > Let's we remove the imposssible condition Since the Temperature is
> > > currently represented as int not long in the thermal driver.
> > > 
> > > Fixes: commit 437df2172e8d
> > > ("thermal: rockchip: consistently use int for temperatures")
> > > 
> > > Reported-by: Dan Carpenter <dan.carpenter-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
> > > Signed-off-by: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> > > 
> > > ---
> > > 
> > > Changes in v3:
> > > - As Brian comments on https://patchwork.kernel.org/patch/7580661/,
> > >   let's remove the impossible condition.
> > > 
> > > Changes in v2: None
> > > Changes in v1: None
> > > 
> > >  drivers/thermal/rockchip_thermal.c | 6 ------
> > >  1 file changed, 6 deletions(-)
> > > 
> > > diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> > > index ae796ec..611de00 100644
> > > --- a/drivers/thermal/rockchip_thermal.c
> > > +++ b/drivers/thermal/rockchip_thermal.c
> > > @@ -549,12 +549,6 @@ static int rockchip_configure_from_dt(struct device *dev,
> > >  		thermal->tshut_temp = shut_temp;
> > >  	}
> > >  
> > > -	if (thermal->tshut_temp > INT_MAX) {
> > > -		dev_err(dev, "Invalid tshut temperature specified: %d\n",
> > > -			thermal->tshut_temp);
> > > -		return -ERANGE;
> > > -	}
> > 
> > Well, that is not entirely correct. The value that we read from DT is
> > u32, but we convert it down to int. I believe you want to move the check
> 
> Do we really account for the possibility of sizeof(int) < sizeof(u32)?
> 
> EDIT: A bit after writing the above line, I notice my error, but in case
> anyone else is thinking the same thing... I guess you're referring to
> the sign bit, since we're casting unsigned to signed.

Yes, exactly. Sorry I was not clear.

-- 
Dmitry

Re: [PATCH v3 2/5] thermal: rockchip: fix a impossible condition caused by the warning

[Dmitry Torokhov]

On Thu, Dec 03, 2015 at 12:33:57PM -0800, Brian Norris wrote:
> On Thu, Dec 03, 2015 at 12:19:08PM -0800, Dmitry Torokhov wrote:
> > On Thu, Dec 03, 2015 at 04:48:40PM +0800, Caesar Wang wrote:
> > > As the Dan report the smatch check the thermal driver warning:
> > > drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
> > > warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
> > > (s32min-s32max > s32max)'
> > > 
> > > Let's we remove the imposssible condition Since the Temperature is
> > > currently represented as int not long in the thermal driver.
> > > 
> > > Fixes: commit 437df2172e8d
> > > ("thermal: rockchip: consistently use int for temperatures")
> > > 
> > > Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
> > > Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> > > 
> > > ---
> > > 
> > > Changes in v3:
> > > - As Brian comments on https://patchwork.kernel.org/patch/7580661/,
> > >   let's remove the impossible condition.
> > > 
> > > Changes in v2: None
> > > Changes in v1: None
> > > 
> > >  drivers/thermal/rockchip_thermal.c | 6 ------
> > >  1 file changed, 6 deletions(-)
> > > 
> > > diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> > > index ae796ec..611de00 100644
> > > --- a/drivers/thermal/rockchip_thermal.c
> > > +++ b/drivers/thermal/rockchip_thermal.c
> > > @@ -549,12 +549,6 @@ static int rockchip_configure_from_dt(struct device *dev,
> > >  		thermal->tshut_temp = shut_temp;
> > >  	}
> > >  
> > > -	if (thermal->tshut_temp > INT_MAX) {
> > > -		dev_err(dev, "Invalid tshut temperature specified: %d\n",
> > > -			thermal->tshut_temp);
> > > -		return -ERANGE;
> > > -	}
> > 
> > Well, that is not entirely correct. The value that we read from DT is
> > u32, but we convert it down to int. I believe you want to move the check
> 
> Do we really account for the possibility of sizeof(int) < sizeof(u32)?
> 
> EDIT: A bit after writing the above line, I notice my error, but in case
> anyone else is thinking the same thing... I guess you're referring to
> the sign bit, since we're casting unsigned to signed.

Yes, exactly. Sorry I was not clear.

-- 
Dmitry

[PATCH v3 2/5] thermal: rockchip: fix a impossible condition caused by the warning

[Dmitry Torokhov]

On Thu, Dec 03, 2015 at 12:33:57PM -0800, Brian Norris wrote:
> On Thu, Dec 03, 2015 at 12:19:08PM -0800, Dmitry Torokhov wrote:
> > On Thu, Dec 03, 2015 at 04:48:40PM +0800, Caesar Wang wrote:
> > > As the Dan report the smatch check the thermal driver warning:
> > > drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
> > > warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
> > > (s32min-s32max > s32max)'
> > > 
> > > Let's we remove the imposssible condition Since the Temperature is
> > > currently represented as int not long in the thermal driver.
> > > 
> > > Fixes: commit 437df2172e8d
> > > ("thermal: rockchip: consistently use int for temperatures")
> > > 
> > > Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
> > > Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> > > 
> > > ---
> > > 
> > > Changes in v3:
> > > - As Brian comments on https://patchwork.kernel.org/patch/7580661/,
> > >   let's remove the impossible condition.
> > > 
> > > Changes in v2: None
> > > Changes in v1: None
> > > 
> > >  drivers/thermal/rockchip_thermal.c | 6 ------
> > >  1 file changed, 6 deletions(-)
> > > 
> > > diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> > > index ae796ec..611de00 100644
> > > --- a/drivers/thermal/rockchip_thermal.c
> > > +++ b/drivers/thermal/rockchip_thermal.c
> > > @@ -549,12 +549,6 @@ static int rockchip_configure_from_dt(struct device *dev,
> > >  		thermal->tshut_temp = shut_temp;
> > >  	}
> > >  
> > > -	if (thermal->tshut_temp > INT_MAX) {
> > > -		dev_err(dev, "Invalid tshut temperature specified: %d\n",
> > > -			thermal->tshut_temp);
> > > -		return -ERANGE;
> > > -	}
> > 
> > Well, that is not entirely correct. The value that we read from DT is
> > u32, but we convert it down to int. I believe you want to move the check
> 
> Do we really account for the possibility of sizeof(int) < sizeof(u32)?
> 
> EDIT: A bit after writing the above line, I notice my error, but in case
> anyone else is thinking the same thing... I guess you're referring to
> the sign bit, since we're casting unsigned to signed.

Yes, exactly. Sorry I was not clear.

-- 
Dmitry

Re: [PATCH v3 2/5] thermal: rockchip: fix a impossible condition caused by the warning

[Caesar Wang]

在 2015年12月04日 04:19, Dmitry Torokhov 写道:
> On Thu, Dec 03, 2015 at 04:48:40PM +0800, Caesar Wang wrote:
>> As the Dan report the smatch check the thermal driver warning:
>> drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
>> warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
>> (s32min-s32max > s32max)'
>>
>> Let's we remove the imposssible condition Since the Temperature is
>> currently represented as int not long in the thermal driver.
>>
>> Fixes: commit 437df2172e8d
>> ("thermal: rockchip: consistently use int for temperatures")
>>
>> Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
>> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
>>
>> ---
>>
>> Changes in v3:
>> - As Brian comments on https://patchwork.kernel.org/patch/7580661/,
>>    let's remove the impossible condition.
>>
>> Changes in v2: None
>> Changes in v1: None
>>
>>   drivers/thermal/rockchip_thermal.c | 6 ------
>>   1 file changed, 6 deletions(-)
>>
>> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
>> index ae796ec..611de00 100644
>> --- a/drivers/thermal/rockchip_thermal.c
>> +++ b/drivers/thermal/rockchip_thermal.c
>> @@ -549,12 +549,6 @@ static int rockchip_configure_from_dt(struct device *dev,
>>   		thermal->tshut_temp = shut_temp;
>>   	}
>>   
>> -	if (thermal->tshut_temp > INT_MAX) {
>> -		dev_err(dev, "Invalid tshut temperature specified: %d\n",
>> -			thermal->tshut_temp);
>> -		return -ERANGE;
>> -	}
> Well, that is not entirely correct. The value that we read from DT is
> u32, but we convert it down to int. I believe you want to move the check
> up so that you do:
>
> 	} else if (tshut_temp > INT_MAX) {
> 		dev_err(dev, "Invalid tshut temperature specified: %d\n",
> 			thermal->tshut_temp);
> 		return -ERANGE;
> 	} else {
> 		thermal->tshut_temp = shut_temp;
> 	}

Okay,
that's seem the following wll be resonable since the checkcode is a warning.

if (of_property_read_u32(np, "rockchip,hw-tshut-temp", &shut_temp)) {
         dev_warn(dev,
              "Missing tshut temp property, using default %d\n",
              thermal->chip->tshut_temp);
         thermal->tshut_temp = thermal->chip->tshut_temp;
     } else {
         if (tshut_temp > INT_MAX) {
             dev_err(dev, "Invalid tshut temperature specified: %d\n",
                 tshut_temp);
             return -ERANGE;
         }
         thermal->tshut_temp = shut_temp;
     }

Thanks,


> Thanks.
>

[PATCH v3 2/5] thermal: rockchip: fix a impossible condition caused by the warning

[Caesar Wang]

? 2015?12?04? 04:19, Dmitry Torokhov ??:
> On Thu, Dec 03, 2015 at 04:48:40PM +0800, Caesar Wang wrote:
>> As the Dan report the smatch check the thermal driver warning:
>> drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
>> warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
>> (s32min-s32max > s32max)'
>>
>> Let's we remove the imposssible condition Since the Temperature is
>> currently represented as int not long in the thermal driver.
>>
>> Fixes: commit 437df2172e8d
>> ("thermal: rockchip: consistently use int for temperatures")
>>
>> Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
>> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
>>
>> ---
>>
>> Changes in v3:
>> - As Brian comments on https://patchwork.kernel.org/patch/7580661/,
>>    let's remove the impossible condition.
>>
>> Changes in v2: None
>> Changes in v1: None
>>
>>   drivers/thermal/rockchip_thermal.c | 6 ------
>>   1 file changed, 6 deletions(-)
>>
>> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
>> index ae796ec..611de00 100644
>> --- a/drivers/thermal/rockchip_thermal.c
>> +++ b/drivers/thermal/rockchip_thermal.c
>> @@ -549,12 +549,6 @@ static int rockchip_configure_from_dt(struct device *dev,
>>   		thermal->tshut_temp = shut_temp;
>>   	}
>>   
>> -	if (thermal->tshut_temp > INT_MAX) {
>> -		dev_err(dev, "Invalid tshut temperature specified: %d\n",
>> -			thermal->tshut_temp);
>> -		return -ERANGE;
>> -	}
> Well, that is not entirely correct. The value that we read from DT is
> u32, but we convert it down to int. I believe you want to move the check
> up so that you do:
>
> 	} else if (tshut_temp > INT_MAX) {
> 		dev_err(dev, "Invalid tshut temperature specified: %d\n",
> 			thermal->tshut_temp);
> 		return -ERANGE;
> 	} else {
> 		thermal->tshut_temp = shut_temp;
> 	}

Okay,
that's seem the following wll be resonable since the checkcode is a warning.

if (of_property_read_u32(np, "rockchip,hw-tshut-temp", &shut_temp)) {
         dev_warn(dev,
              "Missing tshut temp property, using default %d\n",
              thermal->chip->tshut_temp);
         thermal->tshut_temp = thermal->chip->tshut_temp;
     } else {
         if (tshut_temp > INT_MAX) {
             dev_err(dev, "Invalid tshut temperature specified: %d\n",
                 tshut_temp);
             return -ERANGE;
         }
         thermal->tshut_temp = shut_temp;
     }

Thanks,


> Thanks.
>

[PATCH v3 1/5] thermal: rockchip: fix a trivial typo

[Caesar Wang]

This patchset trys to dictate unified format for driver.

Signed-off-by: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

---

Changes in v3: None
Changes in v2:
- As Heiko comments, move to documenting the fields in the header
  instead of inside the table.

Changes in v1:
- Search more trivial typo for me.

 drivers/thermal/rockchip_thermal.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index e845841..ae796ec 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -38,7 +38,7 @@ enum tshut_mode {
 };
 
 /**
- * the system Temperature Sensors tshut(tshut) polarity
+ * The system Temperature Sensors tshut(tshut) polarity
  * the bit 8 is tshut polarity.
  * 0: low active, 1: high active
  */
@@ -57,10 +57,10 @@ enum sensor_id {
 };
 
 /**
-* The conversion table has the adc value and temperature.
-* ADC_DECREMENT is the adc value decremnet.(e.g. v2_code_table)
-* ADC_INCREMNET is the adc value incremnet.(e.g. v3_code_table)
-*/
+ * The conversion table has the adc value and temperature.
+ * ADC_DECREMENT: the adc value is of diminishing.(e.g. v2_code_table)
+ * ADC_INCREMENT: the adc value is incremental.(e.g. v3_code_table)
+ */
 enum adc_sort_mode {
 	ADC_DECREMENT = 0,
 	ADC_INCREMENT,
@@ -72,16 +72,17 @@ enum adc_sort_mode {
  */
 #define SOC_MAX_SENSORS	2
 
+/**
+ * struct chip_tsadc_table: hold information about chip-specific differences
+ * @id: conversion table
+ * @length: size of conversion table
+ * @data_mask: mask to apply on data inputs
+ * @mode: sort mode of this adc variant (incrementing or decrementing)
+ */
 struct chip_tsadc_table {
 	const struct tsadc_table *id;
-
-	/* the array table size*/
 	unsigned int length;
-
-	/* that analogic mask data */
 	u32 data_mask;
-
-	/* the sort mode is adc value that increment or decrement in table */
 	enum adc_sort_mode mode;
 };
 
@@ -617,7 +618,7 @@ rockchip_thermal_register_sensor(struct platform_device *pdev,
 	return 0;
 }
 
-/*
+/**
  * Reset TSADC Controller, reset all tsadc registers.
  */
 static void rockchip_thermal_reset_controller(struct reset_control *reset)
-- 
1.9.1

[PATCH v3 1/5] thermal: rockchip: fix a trivial typo

[Caesar Wang]

This patchset trys to dictate unified format for driver.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>

---

Changes in v3: None
Changes in v2:
- As Heiko comments, move to documenting the fields in the header
  instead of inside the table.

Changes in v1:
- Search more trivial typo for me.

 drivers/thermal/rockchip_thermal.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index e845841..ae796ec 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -38,7 +38,7 @@ enum tshut_mode {
 };
 
 /**
- * the system Temperature Sensors tshut(tshut) polarity
+ * The system Temperature Sensors tshut(tshut) polarity
  * the bit 8 is tshut polarity.
  * 0: low active, 1: high active
  */
@@ -57,10 +57,10 @@ enum sensor_id {
 };
 
 /**
-* The conversion table has the adc value and temperature.
-* ADC_DECREMENT is the adc value decremnet.(e.g. v2_code_table)
-* ADC_INCREMNET is the adc value incremnet.(e.g. v3_code_table)
-*/
+ * The conversion table has the adc value and temperature.
+ * ADC_DECREMENT: the adc value is of diminishing.(e.g. v2_code_table)
+ * ADC_INCREMENT: the adc value is incremental.(e.g. v3_code_table)
+ */
 enum adc_sort_mode {
 	ADC_DECREMENT = 0,
 	ADC_INCREMENT,
@@ -72,16 +72,17 @@ enum adc_sort_mode {
  */
 #define SOC_MAX_SENSORS	2
 
+/**
+ * struct chip_tsadc_table: hold information about chip-specific differences
+ * @id: conversion table
+ * @length: size of conversion table
+ * @data_mask: mask to apply on data inputs
+ * @mode: sort mode of this adc variant (incrementing or decrementing)
+ */
 struct chip_tsadc_table {
 	const struct tsadc_table *id;
-
-	/* the array table size*/
 	unsigned int length;
-
-	/* that analogic mask data */
 	u32 data_mask;
-
-	/* the sort mode is adc value that increment or decrement in table */
 	enum adc_sort_mode mode;
 };
 
@@ -617,7 +618,7 @@ rockchip_thermal_register_sensor(struct platform_device *pdev,
 	return 0;
 }
 
-/*
+/**
  * Reset TSADC Controller, reset all tsadc registers.
  */
 static void rockchip_thermal_reset_controller(struct reset_control *reset)
-- 
1.9.1

[PATCH v3 1/5] thermal: rockchip: fix a trivial typo

[Caesar Wang]

This patchset trys to dictate unified format for driver.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>

---

Changes in v3: None
Changes in v2:
- As Heiko comments, move to documenting the fields in the header
  instead of inside the table.

Changes in v1:
- Search more trivial typo for me.

 drivers/thermal/rockchip_thermal.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index e845841..ae796ec 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -38,7 +38,7 @@ enum tshut_mode {
 };
 
 /**
- * the system Temperature Sensors tshut(tshut) polarity
+ * The system Temperature Sensors tshut(tshut) polarity
  * the bit 8 is tshut polarity.
  * 0: low active, 1: high active
  */
@@ -57,10 +57,10 @@ enum sensor_id {
 };
 
 /**
-* The conversion table has the adc value and temperature.
-* ADC_DECREMENT is the adc value decremnet.(e.g. v2_code_table)
-* ADC_INCREMNET is the adc value incremnet.(e.g. v3_code_table)
-*/
+ * The conversion table has the adc value and temperature.
+ * ADC_DECREMENT: the adc value is of diminishing.(e.g. v2_code_table)
+ * ADC_INCREMENT: the adc value is incremental.(e.g. v3_code_table)
+ */
 enum adc_sort_mode {
 	ADC_DECREMENT = 0,
 	ADC_INCREMENT,
@@ -72,16 +72,17 @@ enum adc_sort_mode {
  */
 #define SOC_MAX_SENSORS	2
 
+/**
+ * struct chip_tsadc_table: hold information about chip-specific differences
+ * @id: conversion table
+ * @length: size of conversion table
+ * @data_mask: mask to apply on data inputs
+ * @mode: sort mode of this adc variant (incrementing or decrementing)
+ */
 struct chip_tsadc_table {
 	const struct tsadc_table *id;
-
-	/* the array table size*/
 	unsigned int length;
-
-	/* that analogic mask data */
 	u32 data_mask;
-
-	/* the sort mode is adc value that increment or decrement in table */
 	enum adc_sort_mode mode;
 };
 
@@ -617,7 +618,7 @@ rockchip_thermal_register_sensor(struct platform_device *pdev,
 	return 0;
 }
 
-/*
+/**
  * Reset TSADC Controller, reset all tsadc registers.
  */
 static void rockchip_thermal_reset_controller(struct reset_control *reset)
-- 
1.9.1

[PATCH v3 3/5] dt-bindings: rockchip-thermal: Support the RK3228/RK3399 SoCs compatible

[Caesar Wang]

This patchset attempts to new compatible for thermal founding
on RK3228/RK3399 SoCs.

Signed-off-by: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

---

Changes in v3: None
Changes in v2: None
Changes in v1:
- As Heiko comments, fix a copy incorrect name.
- Add a Acked from Rob.

 Documentation/devicetree/bindings/thermal/rockchip-thermal.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
index 0dfa60d..08efe6b 100644
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
@@ -2,8 +2,10 @@
 
 Required properties:
 - compatible : should be "rockchip,<name>-tsadc"
+   "rockchip,rk3228-tsadc": found on RK3228 SoCs
    "rockchip,rk3288-tsadc": found on RK3288 SoCs
    "rockchip,rk3368-tsadc": found on RK3368 SoCs
+   "rockchip,rk3399-tsadc": found on RK3399 SoCs
 - reg : physical base address of the controller and length of memory mapped
 	region.
 - interrupts : The interrupt number to the cpu. The interrupt specifier format
-- 
1.9.1

[PATCH v3 3/5] dt-bindings: rockchip-thermal: Support the RK3228/RK3399 SoCs compatible

[Caesar Wang]

This patchset attempts to new compatible for thermal founding
on RK3228/RK3399 SoCs.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>

---

Changes in v3: None
Changes in v2: None
Changes in v1:
- As Heiko comments, fix a copy incorrect name.
- Add a Acked from Rob.

 Documentation/devicetree/bindings/thermal/rockchip-thermal.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
index 0dfa60d..08efe6b 100644
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
@@ -2,8 +2,10 @@
 
 Required properties:
 - compatible : should be "rockchip,<name>-tsadc"
+   "rockchip,rk3228-tsadc": found on RK3228 SoCs
    "rockchip,rk3288-tsadc": found on RK3288 SoCs
    "rockchip,rk3368-tsadc": found on RK3368 SoCs
+   "rockchip,rk3399-tsadc": found on RK3399 SoCs
 - reg : physical base address of the controller and length of memory mapped
 	region.
 - interrupts : The interrupt number to the cpu. The interrupt specifier format
-- 
1.9.1

[PATCH v3 3/5] dt-bindings: rockchip-thermal: Support the RK3228/RK3399 SoCs compatible

[Caesar Wang]

This patchset attempts to new compatible for thermal founding
on RK3228/RK3399 SoCs.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>

---

Changes in v3: None
Changes in v2: None
Changes in v1:
- As Heiko comments, fix a copy incorrect name.
- Add a Acked from Rob.

 Documentation/devicetree/bindings/thermal/rockchip-thermal.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
index 0dfa60d..08efe6b 100644
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
@@ -2,8 +2,10 @@
 
 Required properties:
 - compatible : should be "rockchip,<name>-tsadc"
+   "rockchip,rk3228-tsadc": found on RK3228 SoCs
    "rockchip,rk3288-tsadc": found on RK3288 SoCs
    "rockchip,rk3368-tsadc": found on RK3368 SoCs
+   "rockchip,rk3399-tsadc": found on RK3399 SoCs
 - reg : physical base address of the controller and length of memory mapped
 	region.
 - interrupts : The interrupt number to the cpu. The interrupt specifier format
-- 
1.9.1

[PATCH v3 4/5] thermal: rockchip: Support the RK3228 SoCs in thermal driver

[Caesar Wang]

The RK3228 SoCs has one Temperature Sensor, channel 0 is for CPU.

Signed-off-by: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---

Changes in v3: None
Changes in v2: None
Changes in v1: None

 drivers/thermal/rockchip_thermal.c | 81 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 611de00..95415ac 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -154,6 +154,7 @@ struct rockchip_thermal_data {
 #define TSADCV2_SHUT_2GPIO_SRC_EN(chn)		BIT(4 + (chn))
 #define TSADCV2_SHUT_2CRU_SRC_EN(chn)		BIT(8 + (chn))
 
+#define TSADCV1_INT_PD_CLEAR_MASK		~BIT(16)
 #define TSADCV2_INT_PD_CLEAR_MASK		~BIT(8)
 
 #define TSADCV2_DATA_MASK			0xfff
@@ -169,6 +170,51 @@ struct tsadc_table {
 	int temp;
 };
 
+/**
+ * Note:
+ * Code to Temperature mapping of the Temperature sensor is a piece wise linear
+ * curve.Any temperature, code faling between to 2 give temperatures can be
+ * linearly interpolated.
+ * Code to Temperature mapping should be updated based on sillcon results.
+ */
+static const struct tsadc_table v1_code_table[] = {
+	{TSADCV3_DATA_MASK, -40000},
+	{436, -40000},
+	{431, -35000},
+	{426, -30000},
+	{421, -25000},
+	{416, -20000},
+	{411, -15000},
+	{406, -10000},
+	{401, -5000},
+	{395, 0},
+	{390, 5000},
+	{385, 10000},
+	{380, 15000},
+	{375, 20000},
+	{370, 25000},
+	{364, 30000},
+	{359, 35000},
+	{354, 40000},
+	{349, 45000},
+	{343, 50000},
+	{338, 55000},
+	{333, 60000},
+	{328, 65000},
+	{322, 70000},
+	{317, 75000},
+	{312, 80000},
+	{307, 85000},
+	{301, 90000},
+	{296, 95000},
+	{291, 100000},
+	{286, 105000},
+	{280, 110000},
+	{275, 115000},
+	{270, 120000},
+	{264, 125000},
+};
+
 static const struct tsadc_table v2_code_table[] = {
 	{TSADCV2_DATA_MASK, -40000},
 	{3800, -40000},
@@ -369,6 +415,14 @@ static void rk_tsadcv2_initialize(void __iomem *regs,
 		       regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
 }
 
+static void rk_tsadcv1_irq_ack(void __iomem *regs)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV2_INT_PD);
+	writel_relaxed(val & TSADCV1_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
+}
+
 static void rk_tsadcv2_irq_ack(void __iomem *regs)
 {
 	u32 val;
@@ -430,6 +484,29 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
 	writel_relaxed(val, regs + TSADCV2_INT_EN);
 }
 
+static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_num = 1, /* one channel for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv1_irq_ack,
+	.control = rk_tsadcv2_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = v1_code_table,
+		.length = ARRAY_SIZE(v1_code_table),
+		.data_mask = TSADCV3_DATA_MASK,
+		.mode = ADC_DECREMENT,
+	},
+};
+
 static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
 	.chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
 	.chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
@@ -480,6 +557,10 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
 
 static const struct of_device_id of_rockchip_thermal_match[] = {
 	{
+		.compatible = "rockchip,rk3228-tsadc",
+		.data = (void *)&rk3228_tsadc_data,
+	},
+	{
 		.compatible = "rockchip,rk3288-tsadc",
 		.data = (void *)&rk3288_tsadc_data,
 	},
-- 
1.9.1

[PATCH v3 4/5] thermal: rockchip: Support the RK3228 SoCs in thermal driver

[Caesar Wang]

The RK3228 SoCs has one Temperature Sensor, channel 0 is for CPU.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---

Changes in v3: None
Changes in v2: None
Changes in v1: None

 drivers/thermal/rockchip_thermal.c | 81 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 611de00..95415ac 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -154,6 +154,7 @@ struct rockchip_thermal_data {
 #define TSADCV2_SHUT_2GPIO_SRC_EN(chn)		BIT(4 + (chn))
 #define TSADCV2_SHUT_2CRU_SRC_EN(chn)		BIT(8 + (chn))
 
+#define TSADCV1_INT_PD_CLEAR_MASK		~BIT(16)
 #define TSADCV2_INT_PD_CLEAR_MASK		~BIT(8)
 
 #define TSADCV2_DATA_MASK			0xfff
@@ -169,6 +170,51 @@ struct tsadc_table {
 	int temp;
 };
 
+/**
+ * Note:
+ * Code to Temperature mapping of the Temperature sensor is a piece wise linear
+ * curve.Any temperature, code faling between to 2 give temperatures can be
+ * linearly interpolated.
+ * Code to Temperature mapping should be updated based on sillcon results.
+ */
+static const struct tsadc_table v1_code_table[] = {
+	{TSADCV3_DATA_MASK, -40000},
+	{436, -40000},
+	{431, -35000},
+	{426, -30000},
+	{421, -25000},
+	{416, -20000},
+	{411, -15000},
+	{406, -10000},
+	{401, -5000},
+	{395, 0},
+	{390, 5000},
+	{385, 10000},
+	{380, 15000},
+	{375, 20000},
+	{370, 25000},
+	{364, 30000},
+	{359, 35000},
+	{354, 40000},
+	{349, 45000},
+	{343, 50000},
+	{338, 55000},
+	{333, 60000},
+	{328, 65000},
+	{322, 70000},
+	{317, 75000},
+	{312, 80000},
+	{307, 85000},
+	{301, 90000},
+	{296, 95000},
+	{291, 100000},
+	{286, 105000},
+	{280, 110000},
+	{275, 115000},
+	{270, 120000},
+	{264, 125000},
+};
+
 static const struct tsadc_table v2_code_table[] = {
 	{TSADCV2_DATA_MASK, -40000},
 	{3800, -40000},
@@ -369,6 +415,14 @@ static void rk_tsadcv2_initialize(void __iomem *regs,
 		       regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
 }
 
+static void rk_tsadcv1_irq_ack(void __iomem *regs)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV2_INT_PD);
+	writel_relaxed(val & TSADCV1_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
+}
+
 static void rk_tsadcv2_irq_ack(void __iomem *regs)
 {
 	u32 val;
@@ -430,6 +484,29 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
 	writel_relaxed(val, regs + TSADCV2_INT_EN);
 }
 
+static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_num = 1, /* one channel for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv1_irq_ack,
+	.control = rk_tsadcv2_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = v1_code_table,
+		.length = ARRAY_SIZE(v1_code_table),
+		.data_mask = TSADCV3_DATA_MASK,
+		.mode = ADC_DECREMENT,
+	},
+};
+
 static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
 	.chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
 	.chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
@@ -480,6 +557,10 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
 
 static const struct of_device_id of_rockchip_thermal_match[] = {
 	{
+		.compatible = "rockchip,rk3228-tsadc",
+		.data = (void *)&rk3228_tsadc_data,
+	},
+	{
 		.compatible = "rockchip,rk3288-tsadc",
 		.data = (void *)&rk3288_tsadc_data,
 	},
-- 
1.9.1

[PATCH v3 4/5] thermal: rockchip: Support the RK3228 SoCs in thermal driver

[Caesar Wang]

The RK3228 SoCs has one Temperature Sensor, channel 0 is for CPU.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---

Changes in v3: None
Changes in v2: None
Changes in v1: None

 drivers/thermal/rockchip_thermal.c | 81 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 611de00..95415ac 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -154,6 +154,7 @@ struct rockchip_thermal_data {
 #define TSADCV2_SHUT_2GPIO_SRC_EN(chn)		BIT(4 + (chn))
 #define TSADCV2_SHUT_2CRU_SRC_EN(chn)		BIT(8 + (chn))
 
+#define TSADCV1_INT_PD_CLEAR_MASK		~BIT(16)
 #define TSADCV2_INT_PD_CLEAR_MASK		~BIT(8)
 
 #define TSADCV2_DATA_MASK			0xfff
@@ -169,6 +170,51 @@ struct tsadc_table {
 	int temp;
 };
 
+/**
+ * Note:
+ * Code to Temperature mapping of the Temperature sensor is a piece wise linear
+ * curve.Any temperature, code faling between to 2 give temperatures can be
+ * linearly interpolated.
+ * Code to Temperature mapping should be updated based on sillcon results.
+ */
+static const struct tsadc_table v1_code_table[] = {
+	{TSADCV3_DATA_MASK, -40000},
+	{436, -40000},
+	{431, -35000},
+	{426, -30000},
+	{421, -25000},
+	{416, -20000},
+	{411, -15000},
+	{406, -10000},
+	{401, -5000},
+	{395, 0},
+	{390, 5000},
+	{385, 10000},
+	{380, 15000},
+	{375, 20000},
+	{370, 25000},
+	{364, 30000},
+	{359, 35000},
+	{354, 40000},
+	{349, 45000},
+	{343, 50000},
+	{338, 55000},
+	{333, 60000},
+	{328, 65000},
+	{322, 70000},
+	{317, 75000},
+	{312, 80000},
+	{307, 85000},
+	{301, 90000},
+	{296, 95000},
+	{291, 100000},
+	{286, 105000},
+	{280, 110000},
+	{275, 115000},
+	{270, 120000},
+	{264, 125000},
+};
+
 static const struct tsadc_table v2_code_table[] = {
 	{TSADCV2_DATA_MASK, -40000},
 	{3800, -40000},
@@ -369,6 +415,14 @@ static void rk_tsadcv2_initialize(void __iomem *regs,
 		       regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
 }
 
+static void rk_tsadcv1_irq_ack(void __iomem *regs)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV2_INT_PD);
+	writel_relaxed(val & TSADCV1_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
+}
+
 static void rk_tsadcv2_irq_ack(void __iomem *regs)
 {
 	u32 val;
@@ -430,6 +484,29 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
 	writel_relaxed(val, regs + TSADCV2_INT_EN);
 }
 
+static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_num = 1, /* one channel for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv1_irq_ack,
+	.control = rk_tsadcv2_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = v1_code_table,
+		.length = ARRAY_SIZE(v1_code_table),
+		.data_mask = TSADCV3_DATA_MASK,
+		.mode = ADC_DECREMENT,
+	},
+};
+
 static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
 	.chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
 	.chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
@@ -480,6 +557,10 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
 
 static const struct of_device_id of_rockchip_thermal_match[] = {
 	{
+		.compatible = "rockchip,rk3228-tsadc",
+		.data = (void *)&rk3228_tsadc_data,
+	},
+	{
 		.compatible = "rockchip,rk3288-tsadc",
 		.data = (void *)&rk3288_tsadc_data,
 	},
-- 
1.9.1

[PATCH v3 5/5] thermal: rockchip: Support the RK3399 SoCs in thermal driver

[Caesar Wang]

The RK3399 SoCs have two Temperature Sensors, channel 0 is for CPU.
channel 1 is for GPU.

Signed-off-by: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

---

Changes in v3: None
Changes in v2: None
Changes in v1:
- fix a irq ack is similar with RK3228 SoCs.

 drivers/thermal/rockchip_thermal.c | 66 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 95415ac..c597784 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -292,6 +292,44 @@ static const struct tsadc_table v3_code_table[] = {
 	{TSADCV3_DATA_MASK, 125000},
 };
 
+static const struct tsadc_table v4_code_table[] = {
+	{TSADCV3_DATA_MASK, -40000},
+	{431, -40000},
+	{426, -35000},
+	{421, -30000},
+	{415, -25000},
+	{410, -20000},
+	{405, -15000},
+	{399, -10000},
+	{394, -5000},
+	{389, 0},
+	{383, 5000},
+	{378, 10000},
+	{373, 15000},
+	{367, 20000},
+	{362, 25000},
+	{357, 30000},
+	{351, 35000},
+	{346, 40000},
+	{340, 45000},
+	{335, 50000},
+	{330, 55000},
+	{324, 60000},
+	{319, 65000},
+	{313, 70000},
+	{308, 75000},
+	{302, 80000},
+	{297, 85000},
+	{291, 90000},
+	{286, 95000},
+	{281, 100000},
+	{275, 105000},
+	{270, 110000},
+	{264, 115000},
+	{259, 120000},
+	{253, 125000},
+};
+
 static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table,
 				   int temp)
 {
@@ -555,6 +593,30 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
 	},
 };
 
+static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	.chn_num = 2, /* two channels for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv1_irq_ack,
+	.control = rk_tsadcv2_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = v4_code_table,
+		.length = ARRAY_SIZE(v4_code_table),
+		.data_mask = TSADCV3_DATA_MASK,
+		.mode = ADC_DECREMENT,
+	},
+};
+
 static const struct of_device_id of_rockchip_thermal_match[] = {
 	{
 		.compatible = "rockchip,rk3228-tsadc",
@@ -568,6 +630,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = {
 		.compatible = "rockchip,rk3368-tsadc",
 		.data = (void *)&rk3368_tsadc_data,
 	},
+	{
+		.compatible = "rockchip,rk3399-tsadc",
+		.data = (void *)&rk3399_tsadc_data,
+	},
 	{ /* end */ },
 };
 MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
-- 
1.9.1

[PATCH v3 5/5] thermal: rockchip: Support the RK3399 SoCs in thermal driver

[Caesar Wang]

The RK3399 SoCs have two Temperature Sensors, channel 0 is for CPU.
channel 1 is for GPU.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>

---

Changes in v3: None
Changes in v2: None
Changes in v1:
- fix a irq ack is similar with RK3228 SoCs.

 drivers/thermal/rockchip_thermal.c | 66 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 95415ac..c597784 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -292,6 +292,44 @@ static const struct tsadc_table v3_code_table[] = {
 	{TSADCV3_DATA_MASK, 125000},
 };
 
+static const struct tsadc_table v4_code_table[] = {
+	{TSADCV3_DATA_MASK, -40000},
+	{431, -40000},
+	{426, -35000},
+	{421, -30000},
+	{415, -25000},
+	{410, -20000},
+	{405, -15000},
+	{399, -10000},
+	{394, -5000},
+	{389, 0},
+	{383, 5000},
+	{378, 10000},
+	{373, 15000},
+	{367, 20000},
+	{362, 25000},
+	{357, 30000},
+	{351, 35000},
+	{346, 40000},
+	{340, 45000},
+	{335, 50000},
+	{330, 55000},
+	{324, 60000},
+	{319, 65000},
+	{313, 70000},
+	{308, 75000},
+	{302, 80000},
+	{297, 85000},
+	{291, 90000},
+	{286, 95000},
+	{281, 100000},
+	{275, 105000},
+	{270, 110000},
+	{264, 115000},
+	{259, 120000},
+	{253, 125000},
+};
+
 static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table,
 				   int temp)
 {
@@ -555,6 +593,30 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
 	},
 };
 
+static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	.chn_num = 2, /* two channels for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv1_irq_ack,
+	.control = rk_tsadcv2_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = v4_code_table,
+		.length = ARRAY_SIZE(v4_code_table),
+		.data_mask = TSADCV3_DATA_MASK,
+		.mode = ADC_DECREMENT,
+	},
+};
+
 static const struct of_device_id of_rockchip_thermal_match[] = {
 	{
 		.compatible = "rockchip,rk3228-tsadc",
@@ -568,6 +630,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = {
 		.compatible = "rockchip,rk3368-tsadc",
 		.data = (void *)&rk3368_tsadc_data,
 	},
+	{
+		.compatible = "rockchip,rk3399-tsadc",
+		.data = (void *)&rk3399_tsadc_data,
+	},
 	{ /* end */ },
 };
 MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
-- 
1.9.1

[PATCH v3 5/5] thermal: rockchip: Support the RK3399 SoCs in thermal driver

[Caesar Wang]

The RK3399 SoCs have two Temperature Sensors, channel 0 is for CPU.
channel 1 is for GPU.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>

---

Changes in v3: None
Changes in v2: None
Changes in v1:
- fix a irq ack is similar with RK3228 SoCs.

 drivers/thermal/rockchip_thermal.c | 66 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 95415ac..c597784 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -292,6 +292,44 @@ static const struct tsadc_table v3_code_table[] = {
 	{TSADCV3_DATA_MASK, 125000},
 };
 
+static const struct tsadc_table v4_code_table[] = {
+	{TSADCV3_DATA_MASK, -40000},
+	{431, -40000},
+	{426, -35000},
+	{421, -30000},
+	{415, -25000},
+	{410, -20000},
+	{405, -15000},
+	{399, -10000},
+	{394, -5000},
+	{389, 0},
+	{383, 5000},
+	{378, 10000},
+	{373, 15000},
+	{367, 20000},
+	{362, 25000},
+	{357, 30000},
+	{351, 35000},
+	{346, 40000},
+	{340, 45000},
+	{335, 50000},
+	{330, 55000},
+	{324, 60000},
+	{319, 65000},
+	{313, 70000},
+	{308, 75000},
+	{302, 80000},
+	{297, 85000},
+	{291, 90000},
+	{286, 95000},
+	{281, 100000},
+	{275, 105000},
+	{270, 110000},
+	{264, 115000},
+	{259, 120000},
+	{253, 125000},
+};
+
 static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table,
 				   int temp)
 {
@@ -555,6 +593,30 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
 	},
 };
 
+static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	.chn_num = 2, /* two channels for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv1_irq_ack,
+	.control = rk_tsadcv2_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = v4_code_table,
+		.length = ARRAY_SIZE(v4_code_table),
+		.data_mask = TSADCV3_DATA_MASK,
+		.mode = ADC_DECREMENT,
+	},
+};
+
 static const struct of_device_id of_rockchip_thermal_match[] = {
 	{
 		.compatible = "rockchip,rk3228-tsadc",
@@ -568,6 +630,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = {
 		.compatible = "rockchip,rk3368-tsadc",
 		.data = (void *)&rk3368_tsadc_data,
 	},
+	{
+		.compatible = "rockchip,rk3399-tsadc",
+		.data = (void *)&rk3399_tsadc_data,
+	},
 	{ /* end */ },
 };
 MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
-- 
1.9.1

Re: [PATCH v3 0/5] Fix a trivial typo and support rk3228/rk3399 SoCs for thermal driver.

[Eduardo Valentin]

Hello,

On Thu, Dec 03, 2015 at 04:48:38PM +0800, Caesar Wang wrote:
> This series pacthes to support the next soc for this thermal driver.
> I don't add the dts thermal data since these SoCs have *_not_* land
> in this mainline. I believe these SoCs dts will land in this mainline
> lately,
> then I will add the thermal data for Heiko.
> 
> This series patches can apply into Eduardo branch.
> https://git.kernel.org/cgit/linux/kernel/git/evalenti/linux-soc-thermal.git
> 
> Also, this series pacthes have built on github branch.
> https://github.com/rockchip-linux/kernel/commits/develop4.4
> 
> PATCH[1/5]:
> That's bit ugly typo, sorry for sending again :(.
> 
> PATCH[2/5]:
> To fix a build warning came from Dan Carpenter report smatch check,
> Thanks. :)
> 
> PATCH[3/5]:
> Add the rk3228/rk3399 SoCs compatible for dt-bindings.
> 
> PATCH[4/5]:
> Add the rk3228 SoCs for thermal driver.
> 
> PATCH[5/5]:
> Add the rk3399 SoCs for thermal driver based on PATCH[4/5].

I applied all but 2/5.

[PATCH v3 0/5] Fix a trivial typo and support rk3228/rk3399 SoCs for thermal driver.

[Eduardo Valentin]

Hello,

On Thu, Dec 03, 2015 at 04:48:38PM +0800, Caesar Wang wrote:
> This series pacthes to support the next soc for this thermal driver.
> I don't add the dts thermal data since these SoCs have *_not_* land
> in this mainline. I believe these SoCs dts will land in this mainline
> lately,
> then I will add the thermal data for Heiko.
> 
> This series patches can apply into Eduardo branch.
> https://git.kernel.org/cgit/linux/kernel/git/evalenti/linux-soc-thermal.git
> 
> Also, this series pacthes have built on github branch.
> https://github.com/rockchip-linux/kernel/commits/develop4.4
> 
> PATCH[1/5]:
> That's bit ugly typo, sorry for sending again :(.
> 
> PATCH[2/5]:
> To fix a build warning came from Dan Carpenter report smatch check,
> Thanks. :)
> 
> PATCH[3/5]:
> Add the rk3228/rk3399 SoCs compatible for dt-bindings.
> 
> PATCH[4/5]:
> Add the rk3228 SoCs for thermal driver.
> 
> PATCH[5/5]:
> Add the rk3399 SoCs for thermal driver based on PATCH[4/5].

I applied all but 2/5.

Re: [PATCH v3 0/5] Fix a trivial typo and support rk3228/rk3399 SoCs for thermal driver.

[Caesar Wang]

在 2015年12月18日 04:09, Eduardo Valentin 写道:
> Hello,
>
> On Thu, Dec 03, 2015 at 04:48:38PM +0800, Caesar Wang wrote:
>> This series pacthes to support the next soc for this thermal driver.
>> I don't add the dts thermal data since these SoCs have *_not_* land
>> in this mainline. I believe these SoCs dts will land in this mainline
>> lately,
>> then I will add the thermal data for Heiko.
>>
>> This series patches can apply into Eduardo branch.
>> https://git.kernel.org/cgit/linux/kernel/git/evalenti/linux-soc-thermal.git
>>
>> Also, this series pacthes have built on github branch.
>> https://github.com/rockchip-linux/kernel/commits/develop4.4
>>
>> PATCH[1/5]:
>> That's bit ugly typo, sorry for sending again :(.
>>
>> PATCH[2/5]:
>> To fix a build warning came from Dan Carpenter report smatch check,
>> Thanks. :)
>>
>> PATCH[3/5]:
>> Add the rk3228/rk3399 SoCs compatible for dt-bindings.
>>
>> PATCH[4/5]:
>> Add the rk3228 SoCs for thermal driver.
>>
>> PATCH[5/5]:
>> Add the rk3399 SoCs for thermal driver based on PATCH[4/5].
> I applied all but 2/5.

Thanks Eduardo,

I send the new patch[2/5].
https://patchwork.kernel.org/patch/7891381/

>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip


-- 
caesar wang | software engineer | wxt@rock-chip.com



_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v3 0/5] Fix a trivial typo and support rk3228/rk3399 SoCs for thermal driver.

[Caesar Wang]

在 2015年12月18日 04:09, Eduardo Valentin 写道:
> Hello,
>
> On Thu, Dec 03, 2015 at 04:48:38PM +0800, Caesar Wang wrote:
>> This series pacthes to support the next soc for this thermal driver.
>> I don't add the dts thermal data since these SoCs have *_not_* land
>> in this mainline. I believe these SoCs dts will land in this mainline
>> lately,
>> then I will add the thermal data for Heiko.
>>
>> This series patches can apply into Eduardo branch.
>> https://git.kernel.org/cgit/linux/kernel/git/evalenti/linux-soc-thermal.git
>>
>> Also, this series pacthes have built on github branch.
>> https://github.com/rockchip-linux/kernel/commits/develop4.4
>>
>> PATCH[1/5]:
>> That's bit ugly typo, sorry for sending again :(.
>>
>> PATCH[2/5]:
>> To fix a build warning came from Dan Carpenter report smatch check,
>> Thanks. :)
>>
>> PATCH[3/5]:
>> Add the rk3228/rk3399 SoCs compatible for dt-bindings.
>>
>> PATCH[4/5]:
>> Add the rk3228 SoCs for thermal driver.
>>
>> PATCH[5/5]:
>> Add the rk3399 SoCs for thermal driver based on PATCH[4/5].
> I applied all but 2/5.

Thanks Eduardo,

I send the new patch[2/5].
https://patchwork.kernel.org/patch/7891381/

>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip


-- 
caesar wang | software engineer | wxt@rock-chip.com

[PATCH v3 0/5] Fix a trivial typo and support rk3228/rk3399 SoCs for thermal driver.

[Caesar Wang]

? 2015?12?18? 04:09, Eduardo Valentin ??:
> Hello,
>
> On Thu, Dec 03, 2015 at 04:48:38PM +0800, Caesar Wang wrote:
>> This series pacthes to support the next soc for this thermal driver.
>> I don't add the dts thermal data since these SoCs have *_not_* land
>> in this mainline. I believe these SoCs dts will land in this mainline
>> lately,
>> then I will add the thermal data for Heiko.
>>
>> This series patches can apply into Eduardo branch.
>> https://git.kernel.org/cgit/linux/kernel/git/evalenti/linux-soc-thermal.git
>>
>> Also, this series pacthes have built on github branch.
>> https://github.com/rockchip-linux/kernel/commits/develop4.4
>>
>> PATCH[1/5]:
>> That's bit ugly typo, sorry for sending again :(.
>>
>> PATCH[2/5]:
>> To fix a build warning came from Dan Carpenter report smatch check,
>> Thanks. :)
>>
>> PATCH[3/5]:
>> Add the rk3228/rk3399 SoCs compatible for dt-bindings.
>>
>> PATCH[4/5]:
>> Add the rk3228 SoCs for thermal driver.
>>
>> PATCH[5/5]:
>> Add the rk3399 SoCs for thermal driver based on PATCH[4/5].
> I applied all but 2/5.

Thanks Eduardo,

I send the new patch[2/5].
https://patchwork.kernel.org/patch/7891381/

>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip


-- 
caesar wang | software engineer | wxt at rock-chip.com

[PATCH v4 2/5] thermal: rockchip: fix a impossible condition caused by the warning

[Caesar Wang]

As the Dan report the smatch check the thermal driver warning:
drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
(s32min-s32max > s32max)'

Although The shut_temp read from DT is u32,the temperature is currently
represented as int not long in the thermal driver.
Let's change to make shut_temp instead of the thermal->tshut_temp for
the condition.

Fixes: commit 437df2172e8d
("thermal: rockchip: consistently use int for temperatures")

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>

---

Changes in v4:
- As the Dmitry and Brain comments, let's change to make.sh
  tshut_temp instead of thermal->tshut_temp.

Changes in v3:
- As Brian comments on https://patchwork.kernel.org/patch/7580661/,
  let's remove the impossible condition.

Changes in v2:
- None

Changes in v1:
- None

 drivers/thermal/rockchip_thermal.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index e845841..7106288 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -545,15 +545,14 @@ static int rockchip_configure_from_dt(struct device *dev,
 			 thermal->chip->tshut_temp);
 		thermal->tshut_temp = thermal->chip->tshut_temp;
 	} else {
+		if (shut_temp > INT_MAX) {
+			dev_err(dev, "Invalid tshut temperature specified: %d\n",
+				shut_temp);
+			return -ERANGE;
+		}
 		thermal->tshut_temp = shut_temp;
 	}
 
-	if (thermal->tshut_temp > INT_MAX) {
-		dev_err(dev, "Invalid tshut temperature specified: %d\n",
-			thermal->tshut_temp);
-		return -ERANGE;
-	}
-
 	if (of_property_read_u32(np, "rockchip,hw-tshut-mode", &tshut_mode)) {
 		dev_warn(dev,
 			 "Missing tshut mode property, using default (%s)\n",
-- 
1.9.1