All of lore.kernel.org
 help / color / mirror / Atom feed
From: Finn Thain <fthain@telegraphics.com.au>
To: "James E.J. Bottomley" <JBottomley@odin.com>,
	Michael Schmitz <schmitzmic@gmail.com>,
	linux-m68k@vger.kernel.org, linux-scsi@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 65/72] atari_scsi, sun3_scsi: Remove global Scsi_Host pointer
Date: Sun, 06 Dec 2015 12:32:31 +1100	[thread overview]
Message-ID: <20151206013143.065536090@telegraphics.com.au> (raw)
In-Reply-To: 20151206013126.995379403@telegraphics.com.au

[-- Attachment #1: atari_scsi-sun3_scsi-remove-global-instances --]
[-- Type: text/plain, Size: 9046 bytes --]

This refactoring removes two global Scsi_Host pointers. This
improves consistency with other ncr5380 drivers. Adopting the same
conventions as the other drivers makes them easier to read.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>

---
 drivers/scsi/atari_NCR5380.c |    5 +-
 drivers/scsi/atari_scsi.c    |   29 ++++++++---------
 drivers/scsi/sun3_scsi.c     |   72 ++++++++++---------------------------------
 3 files changed, 36 insertions(+), 70 deletions(-)

Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c	2015-12-06 12:30:58.000000000 +1100
+++ linux/drivers/scsi/atari_scsi.c	2015-12-06 12:31:12.000000000 +1100
@@ -159,14 +159,10 @@ static inline unsigned long SCSI_DMA_GET
 	return adr;
 }
 
-#define HOSTDATA_DMALEN		(((struct NCR5380_hostdata *) \
-				(atari_scsi_host->hostdata))->dma_len)
-
 #ifdef REAL_DMA
 static void atari_scsi_fetch_restbytes(void);
 #endif
 
-static struct Scsi_Host *atari_scsi_host;
 static unsigned char (*atari_scsi_reg_read)(unsigned char reg);
 static void (*atari_scsi_reg_write)(unsigned char reg, unsigned char value);
 
@@ -262,15 +258,17 @@ static void scsi_dma_buserr(int irq, voi
 #endif
 
 
-static irqreturn_t scsi_tt_intr(int irq, void *dummy)
+static irqreturn_t scsi_tt_intr(int irq, void *dev)
 {
 #ifdef REAL_DMA
+	struct Scsi_Host *instance = dev;
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int dma_stat;
 
 	dma_stat = tt_scsi_dma.dma_ctrl;
 
-	dprintk(NDEBUG_INTR, "scsi%d: NCR5380 interrupt, DMA status = %02x\n",
-		   atari_scsi_host->host_no, dma_stat & 0xff);
+	dsprintk(NDEBUG_INTR, instance, "NCR5380 interrupt, DMA status = %02x\n",
+	         dma_stat & 0xff);
 
 	/* Look if it was the DMA that has interrupted: First possibility
 	 * is that a bus error occurred...
@@ -293,7 +291,8 @@ static irqreturn_t scsi_tt_intr(int irq,
 	 * data reg!
 	 */
 	if ((dma_stat & 0x02) && !(dma_stat & 0x40)) {
-		atari_dma_residual = HOSTDATA_DMALEN - (SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
+		atari_dma_residual = hostdata->dma_len -
+			(SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
 
 		dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
 			   atari_dma_residual);
@@ -345,15 +344,17 @@ static irqreturn_t scsi_tt_intr(int irq,
 
 #endif /* REAL_DMA */
 
-	NCR5380_intr(irq, dummy);
+	NCR5380_intr(irq, dev);
 
 	return IRQ_HANDLED;
 }
 
 
-static irqreturn_t scsi_falcon_intr(int irq, void *dummy)
+static irqreturn_t scsi_falcon_intr(int irq, void *dev)
 {
 #ifdef REAL_DMA
+	struct Scsi_Host *instance = dev;
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int dma_stat;
 
 	/* Turn off DMA and select sector counter register before
@@ -388,7 +389,7 @@ static irqreturn_t scsi_falcon_intr(int
 			printk(KERN_ERR "SCSI DMA error: %ld bytes lost in "
 			       "ST-DMA fifo\n", transferred & 15);
 
-		atari_dma_residual = HOSTDATA_DMALEN - transferred;
+		atari_dma_residual = hostdata->dma_len - transferred;
 		dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
 			   atari_dma_residual);
 	} else
@@ -400,13 +401,14 @@ static irqreturn_t scsi_falcon_intr(int
 		 * data to the original destination address.
 		 */
 		memcpy(atari_dma_orig_addr, phys_to_virt(atari_dma_startaddr),
-		       HOSTDATA_DMALEN - atari_dma_residual);
+		       hostdata->dma_len - atari_dma_residual);
 		atari_dma_orig_addr = NULL;
 	}
 
 #endif /* REAL_DMA */
 
-	NCR5380_intr(irq, dummy);
+	NCR5380_intr(irq, dev);
+
 	return IRQ_HANDLED;
 }
 
@@ -873,7 +875,6 @@ static int __init atari_scsi_probe(struc
 		error = -ENOMEM;
 		goto fail_alloc;
 	}
-	atari_scsi_host = instance;
 
 	instance->irq = irq->start;
 
Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
--- linux.orig/drivers/scsi/sun3_scsi.c	2015-12-06 12:30:58.000000000 +1100
+++ linux/drivers/scsi/sun3_scsi.c	2015-12-06 12:31:12.000000000 +1100
@@ -56,9 +56,9 @@
 #define NCR5380_info                    sun3scsi_info
 
 #define NCR5380_dma_read_setup(instance, data, count) \
-        sun3scsi_dma_setup(data, count, 0)
+        sun3scsi_dma_setup(instance, data, count, 0)
 #define NCR5380_dma_write_setup(instance, data, count) \
-        sun3scsi_dma_setup(data, count, 1)
+        sun3scsi_dma_setup(instance, data, count, 1)
 #define NCR5380_dma_residual(instance) \
         sun3scsi_dma_residual(instance)
 #define NCR5380_dma_xfer_len(instance, cmd, phase) \
@@ -99,7 +99,6 @@ static unsigned char *sun3_dma_orig_addr
 static unsigned long sun3_dma_orig_count;
 static int sun3_dma_active;
 static unsigned long last_residual;
-static struct Scsi_Host *default_instance;
 
 /*
  * NCR 5380 register access functions
@@ -142,8 +141,9 @@ static inline void sun3_udc_write(unsign
 // safe bits for the CSR
 #define CSR_GOOD 0x060f
 
-static irqreturn_t scsi_sun3_intr(int irq, void *dummy)
+static irqreturn_t scsi_sun3_intr(int irq, void *dev)
 {
+	struct Scsi_Host *instance = dev;
 	unsigned short csr = dregs->csr;
 	int handled = 0;
 
@@ -152,46 +152,24 @@ static irqreturn_t scsi_sun3_intr(int ir
 #endif
 
 	if(csr & ~CSR_GOOD) {
-		if(csr & CSR_DMA_BUSERR) {
-			printk("scsi%d: bus error in dma\n", default_instance->host_no);
-		}
-
-		if(csr & CSR_DMA_CONFLICT) {
-			printk("scsi%d: dma conflict\n", default_instance->host_no);
-		}
+		if (csr & CSR_DMA_BUSERR)
+			shost_printk(KERN_ERR, instance, "bus error in DMA\n");
+		if (csr & CSR_DMA_CONFLICT)
+			shost_printk(KERN_ERR, instance, "DMA conflict\n");
 		handled = 1;
 	}
 
 	if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
-		NCR5380_intr(irq, dummy);
+		NCR5380_intr(irq, dev);
 		handled = 1;
 	}
 
 	return IRQ_RETVAL(handled);
 }
 
-/*
- * Debug stuff - to be called on NMI, or sysrq key. Use at your own risk; 
- * reentering NCR5380_print_status seems to have ugly side effects
- */
-
-/* this doesn't seem to get used at all -- sam */
-#if 0
-void sun3_sun3_debug (void)
-{
-	unsigned long flags;
-
-	if (default_instance) {
-			local_irq_save(flags);
-			NCR5380_print_status(default_instance);
-			local_irq_restore(flags);
-	}
-}
-#endif
-
-
 /* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
-static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag)
+static unsigned long sun3scsi_dma_setup(struct Scsi_Host *instance,
+                                void *data, unsigned long count, int write_flag)
 {
 	void *addr;
 
@@ -243,10 +221,9 @@ static unsigned long sun3scsi_dma_setup(
 	dregs->csr |= CSR_FIFO;
 	
 	if(dregs->fifo_count != count) { 
-		printk("scsi%d: fifo_mismatch %04x not %04x\n",
-		       default_instance->host_no, dregs->fifo_count,
-		       (unsigned int) count);
-		NCR5380_dprint(NDEBUG_DMA, default_instance);
+		shost_printk(KERN_ERR, instance, "FIFO mismatch %04x not %04x\n",
+		             dregs->fifo_count, (unsigned int) count);
+		NCR5380_dprint(NDEBUG_DMA, instance);
 	}
 
 	/* setup udc */
@@ -281,21 +258,6 @@ static unsigned long sun3scsi_dma_setup(
 
 }
 
-#ifndef SUN3_SCSI_VME
-static inline unsigned long sun3scsi_dma_count(struct Scsi_Host *instance)
-{
-	unsigned short resid;
-
-	dregs->udc_addr = 0x32; 
-	udelay(SUN3_DMA_DELAY);
-	resid = dregs->udc_data;
-	udelay(SUN3_DMA_DELAY);
-	resid *= 2;
-
-	return (unsigned long) resid;
-}
-#endif
-
 static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
 {
 	return last_residual;
@@ -393,7 +355,10 @@ static int sun3scsi_dma_finish(int write
 		}
 	}
 
-	count = sun3scsi_dma_count(default_instance);
+	dregs->udc_addr = 0x32;
+	udelay(SUN3_DMA_DELAY);
+	count = 2 * dregs->udc_data;
+	udelay(SUN3_DMA_DELAY);
 
 	fifo = dregs->fifo_count;
 	last_residual = fifo;
@@ -547,7 +512,6 @@ static int __init sun3_scsi_probe(struct
 		error = -ENOMEM;
 		goto fail_alloc;
 	}
-	default_instance = instance;
 
 	instance->io_port = (unsigned long)ioaddr;
 	instance->irq = irq->start;
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c	2015-12-06 12:31:11.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c	2015-12-06 12:31:12.000000000 +1100
@@ -1915,7 +1915,7 @@ static void NCR5380_information_transfer
 				/* this command setup for dma yet? */
 				if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != cmd)) {
 					if (cmd->request->cmd_type == REQ_TYPE_FS) {
-						sun3scsi_dma_setup(d, count,
+						sun3scsi_dma_setup(instance, d, count,
 						                   rq_data_dir(cmd->request));
 						sun3_dma_setup_done = cmd;
 					}
@@ -2453,7 +2453,8 @@ static void NCR5380_reselect(struct Scsi
 		}
 		/* setup this command for dma if not already */
 		if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != tmp)) {
-			sun3scsi_dma_setup(d, count, rq_data_dir(tmp->request));
+			sun3scsi_dma_setup(instance, d, count,
+			                   rq_data_dir(tmp->request));
 			sun3_dma_setup_done = tmp;
 		}
 	}

WARNING: multiple messages have this Message-ID (diff)
From: Finn Thain <fthain@telegraphics.com.au>
To: "James E.J. Bottomley" <JBottomley@odin.com>,
	Michael Schmitz <schmitzmic@gmail.com>,
	<linux-m68k@vger.kernel.org>, <linux-scsi@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 65/72] atari_scsi, sun3_scsi: Remove global Scsi_Host pointer
Date: Sun, 06 Dec 2015 12:32:31 +1100	[thread overview]
Message-ID: <20151206013143.065536090@telegraphics.com.au> (raw)
In-Reply-To: 20151206013126.995379403@telegraphics.com.au

[-- Attachment #1: atari_scsi-sun3_scsi-remove-global-instances --]
[-- Type: text/plain, Size: 9048 bytes --]

This refactoring removes two global Scsi_Host pointers. This
improves consistency with other ncr5380 drivers. Adopting the same
conventions as the other drivers makes them easier to read.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>

---
 drivers/scsi/atari_NCR5380.c |    5 +-
 drivers/scsi/atari_scsi.c    |   29 ++++++++---------
 drivers/scsi/sun3_scsi.c     |   72 ++++++++++---------------------------------
 3 files changed, 36 insertions(+), 70 deletions(-)

Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c	2015-12-06 12:30:58.000000000 +1100
+++ linux/drivers/scsi/atari_scsi.c	2015-12-06 12:31:12.000000000 +1100
@@ -159,14 +159,10 @@ static inline unsigned long SCSI_DMA_GET
 	return adr;
 }
 
-#define HOSTDATA_DMALEN		(((struct NCR5380_hostdata *) \
-				(atari_scsi_host->hostdata))->dma_len)
-
 #ifdef REAL_DMA
 static void atari_scsi_fetch_restbytes(void);
 #endif
 
-static struct Scsi_Host *atari_scsi_host;
 static unsigned char (*atari_scsi_reg_read)(unsigned char reg);
 static void (*atari_scsi_reg_write)(unsigned char reg, unsigned char value);
 
@@ -262,15 +258,17 @@ static void scsi_dma_buserr(int irq, voi
 #endif
 
 
-static irqreturn_t scsi_tt_intr(int irq, void *dummy)
+static irqreturn_t scsi_tt_intr(int irq, void *dev)
 {
 #ifdef REAL_DMA
+	struct Scsi_Host *instance = dev;
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int dma_stat;
 
 	dma_stat = tt_scsi_dma.dma_ctrl;
 
-	dprintk(NDEBUG_INTR, "scsi%d: NCR5380 interrupt, DMA status = %02x\n",
-		   atari_scsi_host->host_no, dma_stat & 0xff);
+	dsprintk(NDEBUG_INTR, instance, "NCR5380 interrupt, DMA status = %02x\n",
+	         dma_stat & 0xff);
 
 	/* Look if it was the DMA that has interrupted: First possibility
 	 * is that a bus error occurred...
@@ -293,7 +291,8 @@ static irqreturn_t scsi_tt_intr(int irq,
 	 * data reg!
 	 */
 	if ((dma_stat & 0x02) && !(dma_stat & 0x40)) {
-		atari_dma_residual = HOSTDATA_DMALEN - (SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
+		atari_dma_residual = hostdata->dma_len -
+			(SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
 
 		dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
 			   atari_dma_residual);
@@ -345,15 +344,17 @@ static irqreturn_t scsi_tt_intr(int irq,
 
 #endif /* REAL_DMA */
 
-	NCR5380_intr(irq, dummy);
+	NCR5380_intr(irq, dev);
 
 	return IRQ_HANDLED;
 }
 
 
-static irqreturn_t scsi_falcon_intr(int irq, void *dummy)
+static irqreturn_t scsi_falcon_intr(int irq, void *dev)
 {
 #ifdef REAL_DMA
+	struct Scsi_Host *instance = dev;
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int dma_stat;
 
 	/* Turn off DMA and select sector counter register before
@@ -388,7 +389,7 @@ static irqreturn_t scsi_falcon_intr(int
 			printk(KERN_ERR "SCSI DMA error: %ld bytes lost in "
 			       "ST-DMA fifo\n", transferred & 15);
 
-		atari_dma_residual = HOSTDATA_DMALEN - transferred;
+		atari_dma_residual = hostdata->dma_len - transferred;
 		dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
 			   atari_dma_residual);
 	} else
@@ -400,13 +401,14 @@ static irqreturn_t scsi_falcon_intr(int
 		 * data to the original destination address.
 		 */
 		memcpy(atari_dma_orig_addr, phys_to_virt(atari_dma_startaddr),
-		       HOSTDATA_DMALEN - atari_dma_residual);
+		       hostdata->dma_len - atari_dma_residual);
 		atari_dma_orig_addr = NULL;
 	}
 
 #endif /* REAL_DMA */
 
-	NCR5380_intr(irq, dummy);
+	NCR5380_intr(irq, dev);
+
 	return IRQ_HANDLED;
 }
 
@@ -873,7 +875,6 @@ static int __init atari_scsi_probe(struc
 		error = -ENOMEM;
 		goto fail_alloc;
 	}
-	atari_scsi_host = instance;
 
 	instance->irq = irq->start;
 
Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
--- linux.orig/drivers/scsi/sun3_scsi.c	2015-12-06 12:30:58.000000000 +1100
+++ linux/drivers/scsi/sun3_scsi.c	2015-12-06 12:31:12.000000000 +1100
@@ -56,9 +56,9 @@
 #define NCR5380_info                    sun3scsi_info
 
 #define NCR5380_dma_read_setup(instance, data, count) \
-        sun3scsi_dma_setup(data, count, 0)
+        sun3scsi_dma_setup(instance, data, count, 0)
 #define NCR5380_dma_write_setup(instance, data, count) \
-        sun3scsi_dma_setup(data, count, 1)
+        sun3scsi_dma_setup(instance, data, count, 1)
 #define NCR5380_dma_residual(instance) \
         sun3scsi_dma_residual(instance)
 #define NCR5380_dma_xfer_len(instance, cmd, phase) \
@@ -99,7 +99,6 @@ static unsigned char *sun3_dma_orig_addr
 static unsigned long sun3_dma_orig_count;
 static int sun3_dma_active;
 static unsigned long last_residual;
-static struct Scsi_Host *default_instance;
 
 /*
  * NCR 5380 register access functions
@@ -142,8 +141,9 @@ static inline void sun3_udc_write(unsign
 // safe bits for the CSR
 #define CSR_GOOD 0x060f
 
-static irqreturn_t scsi_sun3_intr(int irq, void *dummy)
+static irqreturn_t scsi_sun3_intr(int irq, void *dev)
 {
+	struct Scsi_Host *instance = dev;
 	unsigned short csr = dregs->csr;
 	int handled = 0;
 
@@ -152,46 +152,24 @@ static irqreturn_t scsi_sun3_intr(int ir
 #endif
 
 	if(csr & ~CSR_GOOD) {
-		if(csr & CSR_DMA_BUSERR) {
-			printk("scsi%d: bus error in dma\n", default_instance->host_no);
-		}
-
-		if(csr & CSR_DMA_CONFLICT) {
-			printk("scsi%d: dma conflict\n", default_instance->host_no);
-		}
+		if (csr & CSR_DMA_BUSERR)
+			shost_printk(KERN_ERR, instance, "bus error in DMA\n");
+		if (csr & CSR_DMA_CONFLICT)
+			shost_printk(KERN_ERR, instance, "DMA conflict\n");
 		handled = 1;
 	}
 
 	if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
-		NCR5380_intr(irq, dummy);
+		NCR5380_intr(irq, dev);
 		handled = 1;
 	}
 
 	return IRQ_RETVAL(handled);
 }
 
-/*
- * Debug stuff - to be called on NMI, or sysrq key. Use at your own risk; 
- * reentering NCR5380_print_status seems to have ugly side effects
- */
-
-/* this doesn't seem to get used at all -- sam */
-#if 0
-void sun3_sun3_debug (void)
-{
-	unsigned long flags;
-
-	if (default_instance) {
-			local_irq_save(flags);
-			NCR5380_print_status(default_instance);
-			local_irq_restore(flags);
-	}
-}
-#endif
-
-
 /* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
-static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag)
+static unsigned long sun3scsi_dma_setup(struct Scsi_Host *instance,
+                                void *data, unsigned long count, int write_flag)
 {
 	void *addr;
 
@@ -243,10 +221,9 @@ static unsigned long sun3scsi_dma_setup(
 	dregs->csr |= CSR_FIFO;
 	
 	if(dregs->fifo_count != count) { 
-		printk("scsi%d: fifo_mismatch %04x not %04x\n",
-		       default_instance->host_no, dregs->fifo_count,
-		       (unsigned int) count);
-		NCR5380_dprint(NDEBUG_DMA, default_instance);
+		shost_printk(KERN_ERR, instance, "FIFO mismatch %04x not %04x\n",
+		             dregs->fifo_count, (unsigned int) count);
+		NCR5380_dprint(NDEBUG_DMA, instance);
 	}
 
 	/* setup udc */
@@ -281,21 +258,6 @@ static unsigned long sun3scsi_dma_setup(
 
 }
 
-#ifndef SUN3_SCSI_VME
-static inline unsigned long sun3scsi_dma_count(struct Scsi_Host *instance)
-{
-	unsigned short resid;
-
-	dregs->udc_addr = 0x32; 
-	udelay(SUN3_DMA_DELAY);
-	resid = dregs->udc_data;
-	udelay(SUN3_DMA_DELAY);
-	resid *= 2;
-
-	return (unsigned long) resid;
-}
-#endif
-
 static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
 {
 	return last_residual;
@@ -393,7 +355,10 @@ static int sun3scsi_dma_finish(int write
 		}
 	}
 
-	count = sun3scsi_dma_count(default_instance);
+	dregs->udc_addr = 0x32;
+	udelay(SUN3_DMA_DELAY);
+	count = 2 * dregs->udc_data;
+	udelay(SUN3_DMA_DELAY);
 
 	fifo = dregs->fifo_count;
 	last_residual = fifo;
@@ -547,7 +512,6 @@ static int __init sun3_scsi_probe(struct
 		error = -ENOMEM;
 		goto fail_alloc;
 	}
-	default_instance = instance;
 
 	instance->io_port = (unsigned long)ioaddr;
 	instance->irq = irq->start;
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c	2015-12-06 12:31:11.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c	2015-12-06 12:31:12.000000000 +1100
@@ -1915,7 +1915,7 @@ static void NCR5380_information_transfer
 				/* this command setup for dma yet? */
 				if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != cmd)) {
 					if (cmd->request->cmd_type == REQ_TYPE_FS) {
-						sun3scsi_dma_setup(d, count,
+						sun3scsi_dma_setup(instance, d, count,
 						                   rq_data_dir(cmd->request));
 						sun3_dma_setup_done = cmd;
 					}
@@ -2453,7 +2453,8 @@ static void NCR5380_reselect(struct Scsi
 		}
 		/* setup this command for dma if not already */
 		if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != tmp)) {
-			sun3scsi_dma_setup(d, count, rq_data_dir(tmp->request));
+			sun3scsi_dma_setup(instance, d, count,
+			                   rq_data_dir(tmp->request));
 			sun3_dma_setup_done = tmp;
 		}
 	}



  parent reply	other threads:[~2015-12-06  1:32 UTC|newest]

Thread overview: 156+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-06  1:31 [PATCH v2 00/72] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
2015-12-06  1:31 ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 01/72] atari_scsi: Fix SCSI host ID setting Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 02/72] ncr5380: Remove redundant static variable initializers Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 03/72] ncr5380: Eliminate PDEBUG*, TDEBUG* and DTCDEBUG* macros Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 04/72] ncr5380: Remove more pointless macros Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 05/72] ncr5380: Remove NCR5380_local_declare and NCR5380_setup macros Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 06/72] ncr5380: Remove NCR5380_instance_name macro Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 07/72] ncr5380: Split NCR5380_init() into two functions Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 08/72] ncr5380: Move NCR53C400-specific code Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 09/72] atari_NCR5380: Reset bus on driver initialization if required Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 10/72] atari_NCR5380: Remove RESET_BOOT, CONFIG_ATARI_SCSI_TOSHIBA_DELAY and CONFIG_ATARI_SCSI_RESET_BOOT Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 11/72] ncr5380: Simplify bus reset handlers Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 12/72] ncr5380: Remove unused hostdata->aborted flag Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 13/72] ncr5380: Remove redundant register writes Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 14/72] ncr5380: Use return instead of goto in NCR5380_select() Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 15/72] ncr5380: Always escalate bad target time-out " Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 16/72] ncr5380: Proceed with next command after NCR5380_select() calls scsi_done Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 17/72] ncr5380: Keep BSY asserted when entering SELECTION phase Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 18/72] ncr5380: Eliminate USLEEP_WAITLONG delay Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 19/72] ncr5380: Cleanup bogus {request, release}_region() calls Finn Thain
2015-12-06  1:31   ` [PATCH v2 19/72] ncr5380: Cleanup bogus {request,release}_region() calls Finn Thain
2015-12-06  1:31   ` [PATCH v2 19/72] ncr5380: Cleanup bogus {request, release}_region() calls Finn Thain
2015-12-06  1:31 ` [PATCH v2 20/72] ncr5380: Introduce unbound workqueue Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 21/72] ncr5380: Sleep when polling, if possible Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06 10:18   ` Geert Uytterhoeven
2015-12-06 22:07     ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 22/72] ncr5380: Eliminate selecting state Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 23/72] ncr5380: Always retry arbitration and selection Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 24/72] ncr5380: Implement NCR5380_dma_xfer_len and remove LIMIT_TRANSFERSIZE macro Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 25/72] ncr5380: Rework disconnect versus poll logic Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 26/72] ncr5380: Fix NCR5380_transfer_pio() result Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 27/72] ncr5380: Add missing lock in eh_abort_handler Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 28/72] ncr5380: Drop DEF_SCSI_QCMD macro Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 29/72] ncr5380: Remove references to linked commands Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 30/72] ncr5380: Add missing break after case MESSAGE_REJECT Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 31/72] ncr5380: Fix !REQ timeout in do_abort() Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 32/72] ncr5380: Fix bus phase " Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:31 ` [PATCH v2 33/72] atari_NCR5380: Set do_abort() timeouts Finn Thain
2015-12-06  1:31   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 34/72] atari_NCR5380: Use arbitration timeout Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 35/72] ncr5380: Dont wait for BUS FREE after disconnect Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 36/72] ncr5380: Use work_struct instead of delayed_work Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 37/72] ncr5380: Standardize work queueing algorithm Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 38/72] ncr5380: Remove UNSAFE macro Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 39/72] ncr5380: Standardize interrupt handling Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 40/72] ncr5380: Introduce NCR5380_poll_politely2 Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 41/72] ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 42/72] ncr5380: Replace READ_OVERRUNS macro with FLAG_NO_DMA_FIXUPS Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 43/72] ncr5380: Standardize reselection handling Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 44/72] ncr5380: Fix off-by-one bug in extended_msg[] bounds check Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 45/72] ncr5380: Cleanup #include directives Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 46/72] ncr5380: Fix NDEBUG_NO_DATAOUT flag Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 47/72] ncr5380: Fix and cleanup scsi_host_template initializers Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 48/72] atari_NCR5380: Fix queue_size limit Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 49/72] ncr5380: Remove redundant ICR_ARBITRATION_LOST test and eliminate FLAG_DTC3181E Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 50/72] ncr5380: Change instance->host_lock to hostdata->lock Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 51/72] ncr5380: Remove command list debug code Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 52/72] ncr5380: Remove H_NO macro and introduce dsprintk Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 53/72] ncr5380: Use shost_priv helper Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 54/72] ncr5380: Use dsprintk() for queue debugging Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 55/72] ncr5380: Remove LIST and REMOVE macros Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 56/72] ncr5380: Remove redundant volatile qualifiers Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 57/72] ncr5380: Use standard list data structure Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 58/72] ncr5380: Refactor command completion Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 59/72] ncr5380: Fix autosense bugs Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 60/72] ncr5380: Implement new eh_abort_handler Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 61/72] ncr5380: Fix EH during arbitration and selection Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 62/72] ncr5380: Implement new eh_bus_reset_handler Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 63/72] atari_NCR5380: Remove HOSTNO macro from printk() and seq_printf() calls Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 64/72] atari_NCR5380: Eliminate HOSTNO macro Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` Finn Thain [this message]
2015-12-06  1:32   ` [PATCH v2 65/72] atari_scsi, sun3_scsi: Remove global Scsi_Host pointer Finn Thain
2015-12-06  1:32 ` [PATCH v2 66/72] ncr5380: Fix soft lockups Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 67/72] ncr5380: Cleanup comments Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 68/72] ncr5380: Fix whitespace issues using regexp Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 69/72] ncr5380: Merge changes from atari_NCR5380.c Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 70/72] atari_NCR5380: Merge changes from NCR5380.c Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 71/72] ncr5380: Cleanup whitespace and parentheses Finn Thain
2015-12-06  1:32   ` Finn Thain
2015-12-06  1:32 ` [PATCH v2 72/72] ncr5380: Fix pseudo DMA transfers on 53C400 Finn Thain
2015-12-06  1:32   ` Finn Thain

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151206013143.065536090@telegraphics.com.au \
    --to=fthain@telegraphics.com.au \
    --cc=JBottomley@odin.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-m68k@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=schmitzmic@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.