All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Simon Horman <horms+renesas@verge.net.au>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-pci@vger.kernel.org, linux-sh@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v2 3/4] PCI: rcar: add gen2 fallback compatibility string
Date: Mon, 7 Dec 2015 09:41:23 -0600	[thread overview]
Message-ID: <20151207154123.GE7994@localhost> (raw)
In-Reply-To: <1449096700-23304-4-git-send-email-horms+renesas@verge.net.au>

On Thu, Dec 03, 2015 at 07:51:39AM +0900, Simon Horman wrote:
> Add fallback compatibility string for R-Car Gen 2 family.
> This is in keeping with the fallback scheme being adopted wherever
> appropriate for drivers for Renesas SoCs.
> 
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

> ---
> v2
> * Include "rcar-" in new compatibility string
> ---
>  Documentation/devicetree/bindings/pci/rcar-pci.txt | 13 ++++++++++---
>  drivers/pci/host/pcie-rcar.c                       |  1 +
>  2 files changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
> index 29d3b989d3b0..6b4d2f798386 100644
> --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
> @@ -1,8 +1,15 @@
>  * Renesas RCar PCIe interface
>  
>  Required properties:
> -- compatible: should contain one of the following
> -	"renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791"
> +compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
> +	    "renesas,pcie-r8a7790" for the R8A7790 SoC;
> +	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
> +	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
> +
> +	    When compatible with the generic version, nodes must list the
> +	    SoC-specific version corresponding to the platform first
> +	    followed by the generic version.
> +
>  - reg: base address and length of the pcie controller registers.
>  - #address-cells: set to <3>
>  - #size-cells: set to <2>
> @@ -25,7 +32,7 @@ Example:
>  SoC specific DT Entry:
>  
>  	pcie: pcie@fe000000 {
> -		compatible = "renesas,pcie-r8a7791";
> +		compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
>  		reg = <0 0xfe000000 0 0x80000>;
>  		#address-cells = <3>;
>  		#size-cells = <2>;
> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> index f4fa6c537448..047279bdc3fe 100644
> --- a/drivers/pci/host/pcie-rcar.c
> +++ b/drivers/pci/host/pcie-rcar.c
> @@ -917,6 +917,7 @@ static int rcar_pcie_parse_map_dma_ranges(struct rcar_pcie *pcie,
>  
>  static const struct of_device_id rcar_pcie_of_match[] = {
>  	{ .compatible = "renesas,pcie-r8a7779", .data = rcar_pcie_hw_init_h1 },
> +	{ .compatible = "renesas,pcie-rcar-gen2", .data = rcar_pcie_hw_init },
>  	{ .compatible = "renesas,pcie-r8a7790", .data = rcar_pcie_hw_init },
>  	{ .compatible = "renesas,pcie-r8a7791", .data = rcar_pcie_hw_init },
>  	{},
> -- 
> 2.1.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Helgaas <helgaas@kernel.org>
To: Simon Horman <horms+renesas@verge.net.au>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-pci@vger.kernel.org, linux-sh@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v2 3/4] PCI: rcar: add gen2 fallback compatibility string
Date: Mon, 07 Dec 2015 15:41:23 +0000	[thread overview]
Message-ID: <20151207154123.GE7994@localhost> (raw)
In-Reply-To: <1449096700-23304-4-git-send-email-horms+renesas@verge.net.au>

On Thu, Dec 03, 2015 at 07:51:39AM +0900, Simon Horman wrote:
> Add fallback compatibility string for R-Car Gen 2 family.
> This is in keeping with the fallback scheme being adopted wherever
> appropriate for drivers for Renesas SoCs.
> 
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

> ---
> v2
> * Include "rcar-" in new compatibility string
> ---
>  Documentation/devicetree/bindings/pci/rcar-pci.txt | 13 ++++++++++---
>  drivers/pci/host/pcie-rcar.c                       |  1 +
>  2 files changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
> index 29d3b989d3b0..6b4d2f798386 100644
> --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
> @@ -1,8 +1,15 @@
>  * Renesas RCar PCIe interface
>  
>  Required properties:
> -- compatible: should contain one of the following
> -	"renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791"
> +compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
> +	    "renesas,pcie-r8a7790" for the R8A7790 SoC;
> +	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
> +	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
> +
> +	    When compatible with the generic version, nodes must list the
> +	    SoC-specific version corresponding to the platform first
> +	    followed by the generic version.
> +
>  - reg: base address and length of the pcie controller registers.
>  - #address-cells: set to <3>
>  - #size-cells: set to <2>
> @@ -25,7 +32,7 @@ Example:
>  SoC specific DT Entry:
>  
>  	pcie: pcie@fe000000 {
> -		compatible = "renesas,pcie-r8a7791";
> +		compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
>  		reg = <0 0xfe000000 0 0x80000>;
>  		#address-cells = <3>;
>  		#size-cells = <2>;
> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> index f4fa6c537448..047279bdc3fe 100644
> --- a/drivers/pci/host/pcie-rcar.c
> +++ b/drivers/pci/host/pcie-rcar.c
> @@ -917,6 +917,7 @@ static int rcar_pcie_parse_map_dma_ranges(struct rcar_pcie *pcie,
>  
>  static const struct of_device_id rcar_pcie_of_match[] = {
>  	{ .compatible = "renesas,pcie-r8a7779", .data = rcar_pcie_hw_init_h1 },
> +	{ .compatible = "renesas,pcie-rcar-gen2", .data = rcar_pcie_hw_init },
>  	{ .compatible = "renesas,pcie-r8a7790", .data = rcar_pcie_hw_init },
>  	{ .compatible = "renesas,pcie-r8a7791", .data = rcar_pcie_hw_init },
>  	{},
> -- 
> 2.1.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-12-07 15:41 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-02 22:51 [PATCH v2 0/4] PCI: rcar, rcar-gen2: More Gen2 compatibility strings Simon Horman
2015-12-02 22:51 ` Simon Horman
2015-12-02 22:51 ` [PATCH v2 1/4] PCI: rcar-gen2: add gen2 fallback compatibility string Simon Horman
2015-12-02 22:51   ` Simon Horman
2015-12-04 15:00   ` Rob Herring
2015-12-04 15:00     ` Rob Herring
2015-12-07 15:40   ` Bjorn Helgaas
2015-12-07 15:40     ` Bjorn Helgaas
2015-12-02 22:51 ` [PATCH v2 2/4] PCI: rcar-gen2: add device tree support for r8a7793 Simon Horman
2015-12-02 22:51   ` Simon Horman
2015-12-02 22:51   ` Simon Horman
2015-12-04 15:01   ` Rob Herring
2015-12-04 15:01     ` Rob Herring
2015-12-02 22:51 ` [PATCH v2 3/4] PCI: rcar: add gen2 fallback compatibility string Simon Horman
2015-12-02 22:51   ` Simon Horman
2015-12-04 15:02   ` Rob Herring
2015-12-04 15:02     ` Rob Herring
2015-12-07 15:41   ` Bjorn Helgaas [this message]
2015-12-07 15:41     ` Bjorn Helgaas
2015-12-02 22:51 ` [PATCH v2 4/4] PCI: rcar: add device tree support for r8a7793 Simon Horman
2015-12-02 22:51   ` Simon Horman
2015-12-04 15:05   ` Rob Herring
2015-12-04 15:05     ` Rob Herring
2015-12-09 18:37 ` [PATCH v2 0/4] PCI: rcar, rcar-gen2: More Gen2 compatibility strings Bjorn Helgaas
2015-12-09 18:37   ` Bjorn Helgaas
2015-12-11  2:14   ` Simon Horman
2015-12-11  2:14     ` Simon Horman
2015-12-11 14:59     ` Bjorn Helgaas
2015-12-11 14:59       ` Bjorn Helgaas
2015-12-11 15:58       ` Geert Uytterhoeven
2015-12-11 15:58         ` Geert Uytterhoeven
2015-12-11 15:58         ` Geert Uytterhoeven
2016-02-04 22:01         ` Bjorn Helgaas
2016-02-04 22:01           ` Bjorn Helgaas
2016-02-05  7:43           ` Geert Uytterhoeven
2016-02-05  7:43             ` Geert Uytterhoeven
2016-02-05 16:10             ` Bjorn Helgaas
2016-02-05 16:10               ` Bjorn Helgaas
2016-02-05 16:26               ` Geert Uytterhoeven
2016-02-05 16:26                 ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151207154123.GE7994@localhost \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=horms+renesas@verge.net.au \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.