From: Denys Dmytriyenko <denys@ti.com>
To: Joshua Vanderpool <jdVdt2@gmail.com>
Cc: meta-ti@yoctoproject.org
Subject: Re: libtool-cross_2.4.6.bb configure failure
Date: Tue, 8 Dec 2015 15:01:47 -0500 [thread overview]
Message-ID: <20151208200147.GA15136@edge> (raw)
In-Reply-To: <CAOYMvD1FdJsUM21hAp8_umo-+qzG9srWAW9B-ZgtCt7wQxhK8w@mail.gmail.com>
What is your host machine and Linux distro?
Also, which version of Linaro toolchain do you use? (with Fido we've switched
to Linaro 2015.05 release, but I think the Wiki hasn't been updated yet)
--
Denys
On Tue, Dec 08, 2015 at 02:10:55PM -0500, Joshua Vanderpool wrote:
> I have used the instructions found here
> http://arago-project.org/wiki/index.php/Setting_Up_Build_Environment
>
> To setup a arago build of the am57xx-evm as a starting point. I then
> ./oe-layertool-setup.sh -f configs/arago-fido-config.txt
>
> I assumed that this had support for the am57xx, however i have been
> unsuccessful to build the core-image-minimal.
>
> I am using the compiler as stated in the wiki.
>
> once i get a build working then i have to add in my custom layers for the
> board i designed.
> I would like to know the layers i should use to have the best video support
> at qt5 will be used and the video ports on the AM57xx.
>
> Thanks for any support and your time.
>
> Warning this is the output:
>
> jvanderpool@jvanderpool-workstation:~/dev/tisdk/build$ MACHINE=am57xx-evm
> bitbake core-image-minimal
> NOTE: Started PRServer with DBfile:
> /home/jvanderpool/dev/tisdk/build/cache/prserv.sqlite3, IP: 127.0.0.1,
> PORT: 45120, PID: 13826
> NOTE: Your conf/bblayers.conf has been automatically updated.
> NOTE: INCLUDING gnutls as buildable despite INCOMPATIBLE_LICENSE because it
> has been whitelisted### | ETA: 00:00:06
> Parsing recipes: 100%
> |####################################################################################|
> Time: 00:01:15
> Parsing of 2084 .bb files complete (0 cached, 2084 parsed). 2613 targets,
> 376 skipped, 0 masked, 0 errors.
> NOTE: Resolving any missing task queue dependencies
>
> Build Configuration:
> BB_VERSION = "1.26.0"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "Ubuntu-14.04"
> TARGET_SYS = "arm-linux-gnueabi"
> MACHINE = "am57xx-evm"
> DISTRO = "arago"
> DISTRO_VERSION = "2015.11"
> TUNE_FEATURES = "arm armv7a vfp thumb neon callconvention-hard
> cortexa15"
> TARGET_FPU = "vfp-neon"
> meta-arago-distro
> meta-arago-extras = "master:0b4f6cf573446ee854c1b128aac59210e45d708b"
> meta-qt5 = "jethro:0454fb083c38f2155a8be3b61930ad1ddf995695"
> meta-networking
> meta-ruby
> meta-python
> meta-oe = "fido:df2f700d66bace65f5d802225232d01cf511fe81"
> meta-ti = "fido:bc10ffc2e4637a3c0cc020b686c93e92c93ee756"
> meta-linaro-toolchain = "fido:08a46787862966f2236c5a9b3eb4d4ec68263593"
> meta = "fido:f0873b83d693af4a103999160d67fcf25c7eedc1"
>
> NOTE: Preparing RunQueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> WARNING: Failed to fetch URL
> http://www.openssl.org/source/openssl-1.0.2d.tar.gz, attempting MIRRORS if
> available
> ERROR: Function failed: do_configure (log file is located at
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265)
> ERROR: Logfile of failure stored in:
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265
> Log data follows:
> | DEBUG: Executing python function sysroot_cleansstate
> | DEBUG: Python function sysroot_cleansstate finished
> | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
> | DEBUG: Executing shell function autotools_preconfigure
> | DEBUG: Shell function autotools_preconfigure finished
> | DEBUG: Executing python function autotools_copy_aclocals
> | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
> | DEBUG: Python function autotools_copy_aclocals finished
> | DEBUG: Executing shell function do_configure
> | automake (GNU automake) 1.15
> | Copyright (C) 2014 Free Software Foundation, Inc.
> | License GPLv2+: GNU GPL version 2 or later <
> http://gnu.org/licenses/gpl-2.0.html>
> | This is free software: you are free to change and redistribute it.
> | There is NO WARRANTY, to the extent permitted by law.
> |
> | Written by Tom Tromey <tromey@redhat.com>
> | and Alexandre Duret-Lutz <adl@gnu.org>.
> | AUTOV is 1
> | NOTE: Executing ACLOCAL="aclocal
> --system-acdir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build/aclocal-copy/"
> autoreconf --verbose --install --force --exclude=libtoolize -I
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> -I
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> | autoreconf: Entering directory `.'
> | autoreconf: configure.ac: not using Gettext
> | autoreconf: running: aclocal
> --system-acdir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build/aclocal-copy/
> -I
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> -I
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> -I
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> -I
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> --force -I m4
> | autoreconf: configure.ac: tracing
> | autoreconf: running:
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoconf
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> --force
> | autoreconf: running:
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoheader
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> --force
> | autoreconf: running: automake --add-missing --copy --force-missing
> | autoreconf: running: gnu-configize
> | autoreconf: Leaving directory `.'
> | NOTE: Running
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/configure
> --build=x86_64-linux --host=arm-linux-gnueabi
> --target=arm-linux-gnueabi --prefix=/usr
> --exec_prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin
> --libexecdir=/usr/lib/libtool
> --datadir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share
> --sysconfdir=/etc --sharedstatedir=/com --localstatedir=/var
> --libdir=/usr/lib
> --includedir=/usr/include --oldincludedir=/usr/include
> --infodir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share/info
> --mandir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share/man
> --disable-silent-rules --disable-dependency-tracking
> --with-libtool-sysroot=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/meta-openembedded/meta-oe/site/endian-little
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/endian-little
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-common
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-32
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common-linux
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common-glibc
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-linux
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common
> | ## ------------------------- ##
> | ## Configuring libtool 2.4.6 ##
> | ## ------------------------- ##
> |
> | checking for GNU M4 that supports accurate traces...
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
> | checking whether
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
> accepts --gnu... yes
> | checking how m4 supports trace files... --debugfile
> | checking for a BSD-compatible install... /usr/bin/install -c
> | checking whether build environment is sane... yes
> | checking for arm-linux-gnueabi-strip... arm-linux-gnueabihf-strip
> | checking for a thread-safe mkdir -p... /bin/mkdir -p
> | checking for gawk... gawk
> | checking whether make sets $(MAKE)... yes
> | checking whether make supports nested variables... yes
> | checking whether make supports nested variables... (cached) yes
> | checking build system type... x86_64-pc-linux-gnu
> | checking host system type... arm-unknown-linux-gnueabi
> | configure: autobuild project... GNU Libtool
> | configure: autobuild revision... 2.4.6
> | configure: autobuild hostname... jvanderpool-workstation
> | configure: autobuild mode... default
> | configure: autobuild timestamp... 20151208T160947Z
> | checking for arm-linux-gnueabi-gcc... arm-linux-gnueabihf-gcc
> -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon
> -mtune=cortex-a15
> --sysroot=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm
> | checking whether the C compiler works... no
> | configure: error: in
> `/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build':
> | configure: error: C compiler cannot create executables
> | See `config.log' for more details
> | Configure failed. The contents of all config.log files follows to aid
> debugging
> | ERROR: oe_runconf failed
> | WARNING:
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/run.do_configure.32265:1
> exit 1 from
> | exit 1
> | ERROR: Function failed: do_configure (log file is located at
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265)
> ERROR: Task 414
> (/home/jvanderpool/dev/tisdk/sources/oe-core/meta/recipes-devtools/libtool/
> libtool-cross_2.4.6.bb, do_configure) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 330 tasks of which 0 didn't need to be rerun
> and 1 failed.
> NOTE: Writing buildhistory
> Waiting for 0 running tasks to finish:
>
> *** Please tell me who you are.
>
> Run
>
> git config --global user.email "you@example.com"
> git config --global user.name "Your Name"
>
> to set your account's default identity.
> Omit --global to set the identity only in this repository.
>
> fatal: unable to auto-detect email address (got
> 'jvanderpool@jvanderpool-workstation.(none)')
>
> Summary: 1 task failed:
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/recipes-devtools/libtool/
> libtool-cross_2.4.6.bb, do_configure
> --
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
next prev parent reply other threads:[~2015-12-08 20:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-08 19:10 libtool-cross_2.4.6.bb configure failure Joshua Vanderpool
2015-12-08 20:01 ` Denys Dmytriyenko [this message]
2015-12-09 11:23 ` Joshua Vanderpool
2015-12-09 11:43 ` Joshua Vanderpool
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151208200147.GA15136@edge \
--to=denys@ti.com \
--cc=jdVdt2@gmail.com \
--cc=meta-ti@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.