libtool-cross_2.4.6.bb configure failure

libtool-cross_2.4.6.bb configure failure

[Joshua Vanderpool]

[-- Attachment #1: Type: text/plain, Size: 11677 bytes --]

I have used the instructions found here
http://arago-project.org/wiki/index.php/Setting_Up_Build_Environment

To setup a arago build of the am57xx-evm as a starting point.  I then
./oe-layertool-setup.sh -f configs/arago-fido-config.txt

I assumed that this had support for the am57xx, however i have been
unsuccessful to build the core-image-minimal.

I am using the compiler as stated in the wiki.

once i get a build working then i have to add in my custom layers for the
board i designed.
I would like to know the layers i should use to have the best video support
at qt5 will be used and the video ports on the AM57xx.

Thanks for any support and your time.

Warning this is the output:

jvanderpool@jvanderpool-workstation:~/dev/tisdk/build$ MACHINE=am57xx-evm
bitbake core-image-minimal
NOTE: Started PRServer with DBfile:
/home/jvanderpool/dev/tisdk/build/cache/prserv.sqlite3, IP: 127.0.0.1,
PORT: 45120, PID: 13826
NOTE: Your conf/bblayers.conf has been automatically updated.
NOTE: INCLUDING gnutls as buildable despite INCOMPATIBLE_LICENSE because it
has been whitelisted###        | ETA:  00:00:06
Parsing recipes: 100%
|####################################################################################|
Time: 00:01:15
Parsing of 2084 .bb files complete (0 cached, 2084 parsed). 2613 targets,
376 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION        = "1.26.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-14.04"
TARGET_SYS        = "arm-linux-gnueabi"
MACHINE           = "am57xx-evm"
DISTRO            = "arago"
DISTRO_VERSION    = "2015.11"
TUNE_FEATURES     = "arm armv7a vfp thumb neon callconvention-hard
cortexa15"
TARGET_FPU        = "vfp-neon"
meta-arago-distro
meta-arago-extras = "master:0b4f6cf573446ee854c1b128aac59210e45d708b"
meta-qt5          = "jethro:0454fb083c38f2155a8be3b61930ad1ddf995695"
meta-networking
meta-ruby
meta-python
meta-oe           = "fido:df2f700d66bace65f5d802225232d01cf511fe81"
meta-ti           = "fido:bc10ffc2e4637a3c0cc020b686c93e92c93ee756"
meta-linaro-toolchain = "fido:08a46787862966f2236c5a9b3eb4d4ec68263593"
meta              = "fido:f0873b83d693af4a103999160d67fcf25c7eedc1"

NOTE: Preparing RunQueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: Failed to fetch URL
http://www.openssl.org/source/openssl-1.0.2d.tar.gz, attempting MIRRORS if
available
ERROR: Function failed: do_configure (log file is located at
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265)
ERROR: Logfile of failure stored in:
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| DEBUG: Executing shell function autotools_preconfigure
| DEBUG: Shell function autotools_preconfigure finished
| DEBUG: Executing python function autotools_copy_aclocals
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| DEBUG: Python function autotools_copy_aclocals finished
| DEBUG: Executing shell function do_configure
| automake (GNU automake) 1.15
| Copyright (C) 2014 Free Software Foundation, Inc.
| License GPLv2+: GNU GPL version 2 or later <
http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Written by Tom Tromey <tromey@redhat.com>
|        and Alexandre Duret-Lutz <adl@gnu.org>.
| AUTOV is 1
| NOTE: Executing ACLOCAL="aclocal
--system-acdir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build/aclocal-copy/"
autoreconf --verbose --install --force --exclude=libtoolize -I
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
-I
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
| autoreconf: Entering directory `.'
| autoreconf: configure.ac: not using Gettext
| autoreconf: running: aclocal
--system-acdir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build/aclocal-copy/
-I
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
-I
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
-I
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
-I
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
--force -I m4
| autoreconf: configure.ac: tracing
| autoreconf: running:
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoconf
--include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
--include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
--force
| autoreconf: running:
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoheader
--include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
--include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
--force
| autoreconf: running: automake --add-missing --copy --force-missing
| autoreconf: running: gnu-configize
| autoreconf: Leaving directory `.'
| NOTE: Running
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/configure
 --build=x86_64-linux  --host=arm-linux-gnueabi
--target=arm-linux-gnueabi  --prefix=/usr
 --exec_prefix=/usr  --bindir=/usr/bin  --sbindir=/usr/sbin
--libexecdir=/usr/lib/libtool
 --datadir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share
 --sysconfdir=/etc  --sharedstatedir=/com  --localstatedir=/var
--libdir=/usr/lib
 --includedir=/usr/include  --oldincludedir=/usr/include
--infodir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share/info
 --mandir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share/man
 --disable-silent-rules  --disable-dependency-tracking
 --with-libtool-sysroot=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm
| configure: loading site script
/home/jvanderpool/dev/tisdk/sources/meta-openembedded/meta-oe/site/endian-little
| configure: loading site script
/home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/endian-little
| configure: loading site script
/home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-common
| configure: loading site script
/home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-32
| configure: loading site script
/home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common-linux
| configure: loading site script
/home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common-glibc
| configure: loading site script
/home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-linux
| configure: loading site script
/home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common
| ## ------------------------- ##
| ## Configuring libtool 2.4.6 ##
| ## ------------------------- ##
|
| checking for GNU M4 that supports accurate traces...
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
| checking whether
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
accepts --gnu... yes
| checking how m4 supports trace files... --debugfile
| checking for a BSD-compatible install... /usr/bin/install -c
| checking whether build environment is sane... yes
| checking for arm-linux-gnueabi-strip... arm-linux-gnueabihf-strip
| checking for a thread-safe mkdir -p... /bin/mkdir -p
| checking for gawk... gawk
| checking whether make sets $(MAKE)... yes
| checking whether make supports nested variables... yes
| checking whether make supports nested variables... (cached) yes
| checking build system type... x86_64-pc-linux-gnu
| checking host system type... arm-unknown-linux-gnueabi
| configure: autobuild project... GNU Libtool
| configure: autobuild revision... 2.4.6
| configure: autobuild hostname... jvanderpool-workstation
| configure: autobuild mode... default
| configure: autobuild timestamp... 20151208T160947Z
| checking for arm-linux-gnueabi-gcc... arm-linux-gnueabihf-gcc
 -march=armv7-a -marm  -mthumb-interwork -mfloat-abi=hard -mfpu=neon
-mtune=cortex-a15
--sysroot=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm
| checking whether the C compiler works... no
| configure: error: in
`/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build':
| configure: error: C compiler cannot create executables
| See `config.log' for more details
| Configure failed. The contents of all config.log files follows to aid
debugging
| ERROR: oe_runconf failed
| WARNING:
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/run.do_configure.32265:1
exit 1 from
|   exit 1
| ERROR: Function failed: do_configure (log file is located at
/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265)
ERROR: Task 414
(/home/jvanderpool/dev/tisdk/sources/oe-core/meta/recipes-devtools/libtool/
libtool-cross_2.4.6.bb, do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 330 tasks of which 0 didn't need to be rerun
and 1 failed.
NOTE: Writing buildhistory
Waiting for 0 running tasks to finish:

*** Please tell me who you are.

Run

  git config --global user.email "you@example.com"
  git config --global user.name "Your Name"

to set your account's default identity.
Omit --global to set the identity only in this repository.

fatal: unable to auto-detect email address (got
'jvanderpool@jvanderpool-workstation.(none)')

Summary: 1 task failed:
  /home/jvanderpool/dev/tisdk/sources/oe-core/meta/recipes-devtools/libtool/
libtool-cross_2.4.6.bb, do_configure

[-- Attachment #2: Type: text/html, Size: 14903 bytes --]

Re: libtool-cross_2.4.6.bb configure failure

[Denys Dmytriyenko]

What is your host machine and Linux distro?

Also, which version of Linaro toolchain do you use? (with Fido we've switched 
to Linaro 2015.05 release, but I think the Wiki hasn't been updated yet)

-- 
Denys


On Tue, Dec 08, 2015 at 02:10:55PM -0500, Joshua Vanderpool wrote:
> I have used the instructions found here
> http://arago-project.org/wiki/index.php/Setting_Up_Build_Environment
> 
> To setup a arago build of the am57xx-evm as a starting point.  I then
> ./oe-layertool-setup.sh -f configs/arago-fido-config.txt
> 
> I assumed that this had support for the am57xx, however i have been
> unsuccessful to build the core-image-minimal.
> 
> I am using the compiler as stated in the wiki.
> 
> once i get a build working then i have to add in my custom layers for the
> board i designed.
> I would like to know the layers i should use to have the best video support
> at qt5 will be used and the video ports on the AM57xx.
> 
> Thanks for any support and your time.
> 
> Warning this is the output:
> 
> jvanderpool@jvanderpool-workstation:~/dev/tisdk/build$ MACHINE=am57xx-evm
> bitbake core-image-minimal
> NOTE: Started PRServer with DBfile:
> /home/jvanderpool/dev/tisdk/build/cache/prserv.sqlite3, IP: 127.0.0.1,
> PORT: 45120, PID: 13826
> NOTE: Your conf/bblayers.conf has been automatically updated.
> NOTE: INCLUDING gnutls as buildable despite INCOMPATIBLE_LICENSE because it
> has been whitelisted###        | ETA:  00:00:06
> Parsing recipes: 100%
> |####################################################################################|
> Time: 00:01:15
> Parsing of 2084 .bb files complete (0 cached, 2084 parsed). 2613 targets,
> 376 skipped, 0 masked, 0 errors.
> NOTE: Resolving any missing task queue dependencies
> 
> Build Configuration:
> BB_VERSION        = "1.26.0"
> BUILD_SYS         = "x86_64-linux"
> NATIVELSBSTRING   = "Ubuntu-14.04"
> TARGET_SYS        = "arm-linux-gnueabi"
> MACHINE           = "am57xx-evm"
> DISTRO            = "arago"
> DISTRO_VERSION    = "2015.11"
> TUNE_FEATURES     = "arm armv7a vfp thumb neon callconvention-hard
> cortexa15"
> TARGET_FPU        = "vfp-neon"
> meta-arago-distro
> meta-arago-extras = "master:0b4f6cf573446ee854c1b128aac59210e45d708b"
> meta-qt5          = "jethro:0454fb083c38f2155a8be3b61930ad1ddf995695"
> meta-networking
> meta-ruby
> meta-python
> meta-oe           = "fido:df2f700d66bace65f5d802225232d01cf511fe81"
> meta-ti           = "fido:bc10ffc2e4637a3c0cc020b686c93e92c93ee756"
> meta-linaro-toolchain = "fido:08a46787862966f2236c5a9b3eb4d4ec68263593"
> meta              = "fido:f0873b83d693af4a103999160d67fcf25c7eedc1"
> 
> NOTE: Preparing RunQueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> WARNING: Failed to fetch URL
> http://www.openssl.org/source/openssl-1.0.2d.tar.gz, attempting MIRRORS if
> available
> ERROR: Function failed: do_configure (log file is located at
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265)
> ERROR: Logfile of failure stored in:
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265
> Log data follows:
> | DEBUG: Executing python function sysroot_cleansstate
> | DEBUG: Python function sysroot_cleansstate finished
> | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
> | DEBUG: Executing shell function autotools_preconfigure
> | DEBUG: Shell function autotools_preconfigure finished
> | DEBUG: Executing python function autotools_copy_aclocals
> | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
> | DEBUG: Python function autotools_copy_aclocals finished
> | DEBUG: Executing shell function do_configure
> | automake (GNU automake) 1.15
> | Copyright (C) 2014 Free Software Foundation, Inc.
> | License GPLv2+: GNU GPL version 2 or later <
> http://gnu.org/licenses/gpl-2.0.html>
> | This is free software: you are free to change and redistribute it.
> | There is NO WARRANTY, to the extent permitted by law.
> |
> | Written by Tom Tromey <tromey@redhat.com>
> |        and Alexandre Duret-Lutz <adl@gnu.org>.
> | AUTOV is 1
> | NOTE: Executing ACLOCAL="aclocal
> --system-acdir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build/aclocal-copy/"
> autoreconf --verbose --install --force --exclude=libtoolize -I
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> -I
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> | autoreconf: Entering directory `.'
> | autoreconf: configure.ac: not using Gettext
> | autoreconf: running: aclocal
> --system-acdir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build/aclocal-copy/
> -I
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> -I
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> -I
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> -I
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> --force -I m4
> | autoreconf: configure.ac: tracing
> | autoreconf: running:
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoconf
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> --force
> | autoreconf: running:
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoheader
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> --force
> | autoreconf: running: automake --add-missing --copy --force-missing
> | autoreconf: running: gnu-configize
> | autoreconf: Leaving directory `.'
> | NOTE: Running
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/configure
>  --build=x86_64-linux  --host=arm-linux-gnueabi
> --target=arm-linux-gnueabi  --prefix=/usr
>  --exec_prefix=/usr  --bindir=/usr/bin  --sbindir=/usr/sbin
> --libexecdir=/usr/lib/libtool
>  --datadir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share
>  --sysconfdir=/etc  --sharedstatedir=/com  --localstatedir=/var
> --libdir=/usr/lib
>  --includedir=/usr/include  --oldincludedir=/usr/include
> --infodir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share/info
>  --mandir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share/man
>  --disable-silent-rules  --disable-dependency-tracking
>  --with-libtool-sysroot=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/meta-openembedded/meta-oe/site/endian-little
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/endian-little
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-common
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-32
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common-linux
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common-glibc
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-linux
> | configure: loading site script
> /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common
> | ## ------------------------- ##
> | ## Configuring libtool 2.4.6 ##
> | ## ------------------------- ##
> |
> | checking for GNU M4 that supports accurate traces...
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
> | checking whether
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
> accepts --gnu... yes
> | checking how m4 supports trace files... --debugfile
> | checking for a BSD-compatible install... /usr/bin/install -c
> | checking whether build environment is sane... yes
> | checking for arm-linux-gnueabi-strip... arm-linux-gnueabihf-strip
> | checking for a thread-safe mkdir -p... /bin/mkdir -p
> | checking for gawk... gawk
> | checking whether make sets $(MAKE)... yes
> | checking whether make supports nested variables... yes
> | checking whether make supports nested variables... (cached) yes
> | checking build system type... x86_64-pc-linux-gnu
> | checking host system type... arm-unknown-linux-gnueabi
> | configure: autobuild project... GNU Libtool
> | configure: autobuild revision... 2.4.6
> | configure: autobuild hostname... jvanderpool-workstation
> | configure: autobuild mode... default
> | configure: autobuild timestamp... 20151208T160947Z
> | checking for arm-linux-gnueabi-gcc... arm-linux-gnueabihf-gcc
>  -march=armv7-a -marm  -mthumb-interwork -mfloat-abi=hard -mfpu=neon
> -mtune=cortex-a15
> --sysroot=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm
> | checking whether the C compiler works... no
> | configure: error: in
> `/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build':
> | configure: error: C compiler cannot create executables
> | See `config.log' for more details
> | Configure failed. The contents of all config.log files follows to aid
> debugging
> | ERROR: oe_runconf failed
> | WARNING:
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/run.do_configure.32265:1
> exit 1 from
> |   exit 1
> | ERROR: Function failed: do_configure (log file is located at
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265)
> ERROR: Task 414
> (/home/jvanderpool/dev/tisdk/sources/oe-core/meta/recipes-devtools/libtool/
> libtool-cross_2.4.6.bb, do_configure) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 330 tasks of which 0 didn't need to be rerun
> and 1 failed.
> NOTE: Writing buildhistory
> Waiting for 0 running tasks to finish:
> 
> *** Please tell me who you are.
> 
> Run
> 
>   git config --global user.email "you@example.com"
>   git config --global user.name "Your Name"
> 
> to set your account's default identity.
> Omit --global to set the identity only in this repository.
> 
> fatal: unable to auto-detect email address (got
> 'jvanderpool@jvanderpool-workstation.(none)')
> 
> Summary: 1 task failed:
>   /home/jvanderpool/dev/tisdk/sources/oe-core/meta/recipes-devtools/libtool/
> libtool-cross_2.4.6.bb, do_configure

> -- 
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti

Re: libtool-cross_2.4.6.bb configure failure

[Joshua Vanderpool]

[-- Attachment #1: Type: text/plain, Size: 13436 bytes --]

The host is a 64 bit Ubuntu 14.04LTS machine.

I am using the 2013 version of the toolchain as found on the wiki.
Could the toolchain be built by the meta-linaro layer, removing the need
for the external toolchain?

Josh

On Tue, Dec 8, 2015 at 3:01 PM, Denys Dmytriyenko <denys@ti.com> wrote:

> What is your host machine and Linux distro?
>
> Also, which version of Linaro toolchain do you use? (with Fido we've
> switched
> to Linaro 2015.05 release, but I think the Wiki hasn't been updated yet)
>
> --
> Denys
>
>
> On Tue, Dec 08, 2015 at 02:10:55PM -0500, Joshua Vanderpool wrote:
> > I have used the instructions found here
> > http://arago-project.org/wiki/index.php/Setting_Up_Build_Environment
> >
> > To setup a arago build of the am57xx-evm as a starting point.  I then
> > ./oe-layertool-setup.sh -f configs/arago-fido-config.txt
> >
> > I assumed that this had support for the am57xx, however i have been
> > unsuccessful to build the core-image-minimal.
> >
> > I am using the compiler as stated in the wiki.
> >
> > once i get a build working then i have to add in my custom layers for the
> > board i designed.
> > I would like to know the layers i should use to have the best video
> support
> > at qt5 will be used and the video ports on the AM57xx.
> >
> > Thanks for any support and your time.
> >
> > Warning this is the output:
> >
> > jvanderpool@jvanderpool-workstation:~/dev/tisdk/build$
> MACHINE=am57xx-evm
> > bitbake core-image-minimal
> > NOTE: Started PRServer with DBfile:
> > /home/jvanderpool/dev/tisdk/build/cache/prserv.sqlite3, IP: 127.0.0.1,
> > PORT: 45120, PID: 13826
> > NOTE: Your conf/bblayers.conf has been automatically updated.
> > NOTE: INCLUDING gnutls as buildable despite INCOMPATIBLE_LICENSE because
> it
> > has been whitelisted###        | ETA:  00:00:06
> > Parsing recipes: 100%
> >
> |####################################################################################|
> > Time: 00:01:15
> > Parsing of 2084 .bb files complete (0 cached, 2084 parsed). 2613 targets,
> > 376 skipped, 0 masked, 0 errors.
> > NOTE: Resolving any missing task queue dependencies
> >
> > Build Configuration:
> > BB_VERSION        = "1.26.0"
> > BUILD_SYS         = "x86_64-linux"
> > NATIVELSBSTRING   = "Ubuntu-14.04"
> > TARGET_SYS        = "arm-linux-gnueabi"
> > MACHINE           = "am57xx-evm"
> > DISTRO            = "arago"
> > DISTRO_VERSION    = "2015.11"
> > TUNE_FEATURES     = "arm armv7a vfp thumb neon callconvention-hard
> > cortexa15"
> > TARGET_FPU        = "vfp-neon"
> > meta-arago-distro
> > meta-arago-extras = "master:0b4f6cf573446ee854c1b128aac59210e45d708b"
> > meta-qt5          = "jethro:0454fb083c38f2155a8be3b61930ad1ddf995695"
> > meta-networking
> > meta-ruby
> > meta-python
> > meta-oe           = "fido:df2f700d66bace65f5d802225232d01cf511fe81"
> > meta-ti           = "fido:bc10ffc2e4637a3c0cc020b686c93e92c93ee756"
> > meta-linaro-toolchain = "fido:08a46787862966f2236c5a9b3eb4d4ec68263593"
> > meta              = "fido:f0873b83d693af4a103999160d67fcf25c7eedc1"
> >
> > NOTE: Preparing RunQueue
> > NOTE: Executing SetScene Tasks
> > NOTE: Executing RunQueue Tasks
> > WARNING: Failed to fetch URL
> > http://www.openssl.org/source/openssl-1.0.2d.tar.gz, attempting MIRRORS
> if
> > available
> > ERROR: Function failed: do_configure (log file is located at
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265)
> > ERROR: Logfile of failure stored in:
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265
> > Log data follows:
> > | DEBUG: Executing python function sysroot_cleansstate
> > | DEBUG: Python function sysroot_cleansstate finished
> > | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
> > 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi',
> 'common']
> > | DEBUG: Executing shell function autotools_preconfigure
> > | DEBUG: Shell function autotools_preconfigure finished
> > | DEBUG: Executing python function autotools_copy_aclocals
> > | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
> > 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi',
> 'common']
> > | DEBUG: Python function autotools_copy_aclocals finished
> > | DEBUG: Executing shell function do_configure
> > | automake (GNU automake) 1.15
> > | Copyright (C) 2014 Free Software Foundation, Inc.
> > | License GPLv2+: GNU GPL version 2 or later <
> > http://gnu.org/licenses/gpl-2.0.html>
> > | This is free software: you are free to change and redistribute it.
> > | There is NO WARRANTY, to the extent permitted by law.
> > |
> > | Written by Tom Tromey <tromey@redhat.com>
> > |        and Alexandre Duret-Lutz <adl@gnu.org>.
> > | AUTOV is 1
> > | NOTE: Executing ACLOCAL="aclocal
> >
> --system-acdir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build/aclocal-copy/"
> > autoreconf --verbose --install --force --exclude=libtoolize -I
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> > -I
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> > | autoreconf: Entering directory `.'
> > | autoreconf: configure.ac: not using Gettext
> > | autoreconf: running: aclocal
> >
> --system-acdir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build/aclocal-copy/
> > -I
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> > -I
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> > -I
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> > -I
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> > --force -I m4
> > | autoreconf: configure.ac: tracing
> > | autoreconf: running:
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoconf
> >
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> >
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> > --force
> > | autoreconf: running:
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoheader
> >
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
> >
> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
> > --force
> > | autoreconf: running: automake --add-missing --copy --force-missing
> > | autoreconf: running: gnu-configize
> > | autoreconf: Leaving directory `.'
> > | NOTE: Running
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/configure
> >  --build=x86_64-linux  --host=arm-linux-gnueabi
> > --target=arm-linux-gnueabi  --prefix=/usr
> >  --exec_prefix=/usr  --bindir=/usr/bin  --sbindir=/usr/sbin
> > --libexecdir=/usr/lib/libtool
> >
> --datadir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share
> >  --sysconfdir=/etc  --sharedstatedir=/com  --localstatedir=/var
> > --libdir=/usr/lib
> >  --includedir=/usr/include  --oldincludedir=/usr/include
> >
> --infodir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share/info
> >
> --mandir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share/man
> >  --disable-silent-rules  --disable-dependency-tracking
> >
> --with-libtool-sysroot=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm
> > | configure: loading site script
> >
> /home/jvanderpool/dev/tisdk/sources/meta-openembedded/meta-oe/site/endian-little
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/endian-little
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-common
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-32
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common-linux
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common-glibc
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-linux
> > | configure: loading site script
> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common
> > | ## ------------------------- ##
> > | ## Configuring libtool 2.4.6 ##
> > | ## ------------------------- ##
> > |
> > | checking for GNU M4 that supports accurate traces...
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
> > | checking whether
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
> > accepts --gnu... yes
> > | checking how m4 supports trace files... --debugfile
> > | checking for a BSD-compatible install... /usr/bin/install -c
> > | checking whether build environment is sane... yes
> > | checking for arm-linux-gnueabi-strip... arm-linux-gnueabihf-strip
> > | checking for a thread-safe mkdir -p... /bin/mkdir -p
> > | checking for gawk... gawk
> > | checking whether make sets $(MAKE)... yes
> > | checking whether make supports nested variables... yes
> > | checking whether make supports nested variables... (cached) yes
> > | checking build system type... x86_64-pc-linux-gnu
> > | checking host system type... arm-unknown-linux-gnueabi
> > | configure: autobuild project... GNU Libtool
> > | configure: autobuild revision... 2.4.6
> > | configure: autobuild hostname... jvanderpool-workstation
> > | configure: autobuild mode... default
> > | configure: autobuild timestamp... 20151208T160947Z
> > | checking for arm-linux-gnueabi-gcc... arm-linux-gnueabihf-gcc
> >  -march=armv7-a -marm  -mthumb-interwork -mfloat-abi=hard -mfpu=neon
> > -mtune=cortex-a15
> >
> --sysroot=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm
> > | checking whether the C compiler works... no
> > | configure: error: in
> >
> `/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build':
> > | configure: error: C compiler cannot create executables
> > | See `config.log' for more details
> > | Configure failed. The contents of all config.log files follows to aid
> > debugging
> > | ERROR: oe_runconf failed
> > | WARNING:
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/run.do_configure.32265:1
> > exit 1 from
> > |   exit 1
> > | ERROR: Function failed: do_configure (log file is located at
> >
> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265)
> > ERROR: Task 414
> >
> (/home/jvanderpool/dev/tisdk/sources/oe-core/meta/recipes-devtools/libtool/
> > libtool-cross_2.4.6.bb, do_configure) failed with exit code '1'
> > NOTE: Tasks Summary: Attempted 330 tasks of which 0 didn't need to be
> rerun
> > and 1 failed.
> > NOTE: Writing buildhistory
> > Waiting for 0 running tasks to finish:
> >
> > *** Please tell me who you are.
> >
> > Run
> >
> >   git config --global user.email "you@example.com"
> >   git config --global user.name "Your Name"
> >
> > to set your account's default identity.
> > Omit --global to set the identity only in this repository.
> >
> > fatal: unable to auto-detect email address (got
> > 'jvanderpool@jvanderpool-workstation.(none)')
> >
> > Summary: 1 task failed:
> >
>  /home/jvanderpool/dev/tisdk/sources/oe-core/meta/recipes-devtools/libtool/
> > libtool-cross_2.4.6.bb, do_configure
>
> > --
> > _______________________________________________
> > meta-ti mailing list
> > meta-ti@yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-ti
>
>

[-- Attachment #2: Type: text/html, Size: 16297 bytes --]

Re: libtool-cross_2.4.6.bb configure failure

[Joshua Vanderpool]

[-- Attachment #1: Type: text/plain, Size: 14255 bytes --]

wget
http://releases.linaro.org/15.05/components/toolchain/binaries/arm-linux-gnueabihf/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf.tar.xz

tar xf gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf.tar.xz

export
PATH=$HOME/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin:$PATH

This allows the configure now the build is proceeding. Sorry i did not know
the switch to 2015.05.

Until the next hurdle:-)

Josh

On Wed, Dec 9, 2015 at 6:23 AM, Joshua Vanderpool <jdvdt2@gmail.com> wrote:

> The host is a 64 bit Ubuntu 14.04LTS machine.
>
> I am using the 2013 version of the toolchain as found on the wiki.
> Could the toolchain be built by the meta-linaro layer, removing the need
> for the external toolchain?
>
> Josh
>
> On Tue, Dec 8, 2015 at 3:01 PM, Denys Dmytriyenko <denys@ti.com> wrote:
>
>> What is your host machine and Linux distro?
>>
>> Also, which version of Linaro toolchain do you use? (with Fido we've
>> switched
>> to Linaro 2015.05 release, but I think the Wiki hasn't been updated yet)
>>
>> --
>> Denys
>>
>>
>> On Tue, Dec 08, 2015 at 02:10:55PM -0500, Joshua Vanderpool wrote:
>> > I have used the instructions found here
>> > http://arago-project.org/wiki/index.php/Setting_Up_Build_Environment
>> >
>> > To setup a arago build of the am57xx-evm as a starting point.  I then
>> > ./oe-layertool-setup.sh -f configs/arago-fido-config.txt
>> >
>> > I assumed that this had support for the am57xx, however i have been
>> > unsuccessful to build the core-image-minimal.
>> >
>> > I am using the compiler as stated in the wiki.
>> >
>> > once i get a build working then i have to add in my custom layers for
>> the
>> > board i designed.
>> > I would like to know the layers i should use to have the best video
>> support
>> > at qt5 will be used and the video ports on the AM57xx.
>> >
>> > Thanks for any support and your time.
>> >
>> > Warning this is the output:
>> >
>> > jvanderpool@jvanderpool-workstation:~/dev/tisdk/build$
>> MACHINE=am57xx-evm
>> > bitbake core-image-minimal
>> > NOTE: Started PRServer with DBfile:
>> > /home/jvanderpool/dev/tisdk/build/cache/prserv.sqlite3, IP: 127.0.0.1,
>> > PORT: 45120, PID: 13826
>> > NOTE: Your conf/bblayers.conf has been automatically updated.
>> > NOTE: INCLUDING gnutls as buildable despite INCOMPATIBLE_LICENSE
>> because it
>> > has been whitelisted###        | ETA:  00:00:06
>> > Parsing recipes: 100%
>> >
>> |####################################################################################|
>> > Time: 00:01:15
>> > Parsing of 2084 .bb files complete (0 cached, 2084 parsed). 2613
>> targets,
>> > 376 skipped, 0 masked, 0 errors.
>> > NOTE: Resolving any missing task queue dependencies
>> >
>> > Build Configuration:
>> > BB_VERSION        = "1.26.0"
>> > BUILD_SYS         = "x86_64-linux"
>> > NATIVELSBSTRING   = "Ubuntu-14.04"
>> > TARGET_SYS        = "arm-linux-gnueabi"
>> > MACHINE           = "am57xx-evm"
>> > DISTRO            = "arago"
>> > DISTRO_VERSION    = "2015.11"
>> > TUNE_FEATURES     = "arm armv7a vfp thumb neon callconvention-hard
>> > cortexa15"
>> > TARGET_FPU        = "vfp-neon"
>> > meta-arago-distro
>> > meta-arago-extras = "master:0b4f6cf573446ee854c1b128aac59210e45d708b"
>> > meta-qt5          = "jethro:0454fb083c38f2155a8be3b61930ad1ddf995695"
>> > meta-networking
>> > meta-ruby
>> > meta-python
>> > meta-oe           = "fido:df2f700d66bace65f5d802225232d01cf511fe81"
>> > meta-ti           = "fido:bc10ffc2e4637a3c0cc020b686c93e92c93ee756"
>> > meta-linaro-toolchain = "fido:08a46787862966f2236c5a9b3eb4d4ec68263593"
>> > meta              = "fido:f0873b83d693af4a103999160d67fcf25c7eedc1"
>> >
>> > NOTE: Preparing RunQueue
>> > NOTE: Executing SetScene Tasks
>> > NOTE: Executing RunQueue Tasks
>> > WARNING: Failed to fetch URL
>> > http://www.openssl.org/source/openssl-1.0.2d.tar.gz, attempting
>> MIRRORS if
>> > available
>> > ERROR: Function failed: do_configure (log file is located at
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265)
>> > ERROR: Logfile of failure stored in:
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265
>> > Log data follows:
>> > | DEBUG: Executing python function sysroot_cleansstate
>> > | DEBUG: Python function sysroot_cleansstate finished
>> > | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
>> > 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi',
>> 'common']
>> > | DEBUG: Executing shell function autotools_preconfigure
>> > | DEBUG: Shell function autotools_preconfigure finished
>> > | DEBUG: Executing python function autotools_copy_aclocals
>> > | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
>> > 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi',
>> 'common']
>> > | DEBUG: Python function autotools_copy_aclocals finished
>> > | DEBUG: Executing shell function do_configure
>> > | automake (GNU automake) 1.15
>> > | Copyright (C) 2014 Free Software Foundation, Inc.
>> > | License GPLv2+: GNU GPL version 2 or later <
>> > http://gnu.org/licenses/gpl-2.0.html>
>> > | This is free software: you are free to change and redistribute it.
>> > | There is NO WARRANTY, to the extent permitted by law.
>> > |
>> > | Written by Tom Tromey <tromey@redhat.com>
>> > |        and Alexandre Duret-Lutz <adl@gnu.org>.
>> > | AUTOV is 1
>> > | NOTE: Executing ACLOCAL="aclocal
>> >
>> --system-acdir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build/aclocal-copy/"
>> > autoreconf --verbose --install --force --exclude=libtoolize -I
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
>> > -I
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
>> > | autoreconf: Entering directory `.'
>> > | autoreconf: configure.ac: not using Gettext
>> > | autoreconf: running: aclocal
>> >
>> --system-acdir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build/aclocal-copy/
>> > -I
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
>> > -I
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
>> > -I
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
>> > -I
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
>> > --force -I m4
>> > | autoreconf: configure.ac: tracing
>> > | autoreconf: running:
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoconf
>> >
>> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
>> >
>> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
>> > --force
>> > | autoreconf: running:
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoheader
>> >
>> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/m4/
>> >
>> --include=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/tests/
>> > --force
>> > | autoreconf: running: automake --add-missing --copy --force-missing
>> > | autoreconf: running: gnu-configize
>> > | autoreconf: Leaving directory `.'
>> > | NOTE: Running
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/libtool-2.4.6/configure
>> >  --build=x86_64-linux  --host=arm-linux-gnueabi
>> > --target=arm-linux-gnueabi  --prefix=/usr
>> >  --exec_prefix=/usr  --bindir=/usr/bin  --sbindir=/usr/sbin
>> > --libexecdir=/usr/lib/libtool
>> >
>> --datadir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share
>> >  --sysconfdir=/etc  --sharedstatedir=/com  --localstatedir=/var
>> > --libdir=/usr/lib
>> >  --includedir=/usr/include  --oldincludedir=/usr/include
>> >
>> --infodir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share/info
>> >
>> --mandir=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/share/man
>> >  --disable-silent-rules  --disable-dependency-tracking
>> >
>> --with-libtool-sysroot=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm
>> > | configure: loading site script
>> >
>> /home/jvanderpool/dev/tisdk/sources/meta-openembedded/meta-oe/site/endian-little
>> > | configure: loading site script
>> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/endian-little
>> > | configure: loading site script
>> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-common
>> > | configure: loading site script
>> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-32
>> > | configure: loading site script
>> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common-linux
>> > | configure: loading site script
>> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common-glibc
>> > | configure: loading site script
>> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/arm-linux
>> > | configure: loading site script
>> > /home/jvanderpool/dev/tisdk/sources/oe-core/meta/site/common
>> > | ## ------------------------- ##
>> > | ## Configuring libtool 2.4.6 ##
>> > | ## ------------------------- ##
>> > |
>> > | checking for GNU M4 that supports accurate traces...
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
>> > | checking whether
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
>> > accepts --gnu... yes
>> > | checking how m4 supports trace files... --debugfile
>> > | checking for a BSD-compatible install... /usr/bin/install -c
>> > | checking whether build environment is sane... yes
>> > | checking for arm-linux-gnueabi-strip... arm-linux-gnueabihf-strip
>> > | checking for a thread-safe mkdir -p... /bin/mkdir -p
>> > | checking for gawk... gawk
>> > | checking whether make sets $(MAKE)... yes
>> > | checking whether make supports nested variables... yes
>> > | checking whether make supports nested variables... (cached) yes
>> > | checking build system type... x86_64-pc-linux-gnu
>> > | checking host system type... arm-unknown-linux-gnueabi
>> > | configure: autobuild project... GNU Libtool
>> > | configure: autobuild revision... 2.4.6
>> > | configure: autobuild hostname... jvanderpool-workstation
>> > | configure: autobuild mode... default
>> > | configure: autobuild timestamp... 20151208T160947Z
>> > | checking for arm-linux-gnueabi-gcc... arm-linux-gnueabihf-gcc
>> >  -march=armv7-a -marm  -mthumb-interwork -mfloat-abi=hard -mfpu=neon
>> > -mtune=cortex-a15
>> >
>> --sysroot=/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm
>> > | checking whether the C compiler works... no
>> > | configure: error: in
>> >
>> `/home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build':
>> > | configure: error: C compiler cannot create executables
>> > | See `config.log' for more details
>> > | Configure failed. The contents of all config.log files follows to aid
>> > debugging
>> > | ERROR: oe_runconf failed
>> > | WARNING:
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/run.do_configure.32265:1
>> > exit 1 from
>> > |   exit 1
>> > | ERROR: Function failed: do_configure (log file is located at
>> >
>> /home/jvanderpool/dev/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.32265)
>> > ERROR: Task 414
>> >
>> (/home/jvanderpool/dev/tisdk/sources/oe-core/meta/recipes-devtools/libtool/
>> > libtool-cross_2.4.6.bb, do_configure) failed with exit code '1'
>> > NOTE: Tasks Summary: Attempted 330 tasks of which 0 didn't need to be
>> rerun
>> > and 1 failed.
>> > NOTE: Writing buildhistory
>> > Waiting for 0 running tasks to finish:
>> >
>> > *** Please tell me who you are.
>> >
>> > Run
>> >
>> >   git config --global user.email "you@example.com"
>> >   git config --global user.name "Your Name"
>> >
>> > to set your account's default identity.
>> > Omit --global to set the identity only in this repository.
>> >
>> > fatal: unable to auto-detect email address (got
>> > 'jvanderpool@jvanderpool-workstation.(none)')
>> >
>> > Summary: 1 task failed:
>> >
>>  /home/jvanderpool/dev/tisdk/sources/oe-core/meta/recipes-devtools/libtool/
>> > libtool-cross_2.4.6.bb, do_configure
>>
>> > --
>> > _______________________________________________
>> > meta-ti mailing list
>> > meta-ti@yoctoproject.org
>> > https://lists.yoctoproject.org/listinfo/meta-ti
>>
>>
>

[-- Attachment #2: Type: text/html, Size: 17449 bytes --]