From: mark.rutland@arm.com (Mark Rutland)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 1/5] arm-cci: Refactor CCI PMU enable/disable methods
Date: Thu, 10 Dec 2015 15:26:08 +0000 [thread overview]
Message-ID: <20151210152608.GC495@leverpostej> (raw)
In-Reply-To: <1447783407-18027-2-git-send-email-suzuki.poulose@arm.com>
On Tue, Nov 17, 2015 at 06:03:23PM +0000, Suzuki K. Poulose wrote:
> This patch refactors the CCI PMU driver code a little bit to
> make it easier share the code for enabling/disabling the CCI
> PMU. This will be used by the hooks to work around the special cases
> where writing to a counter is not always that easy(e.g, CCI-500)
>
> No functional changes.
Looks sensible to me:
Acked-by: Mark Rutland <mark.rutland@arm.com>
Mark.
> Cc: Punit Agrawal <punit.agrawal@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
> ---
> drivers/bus/arm-cci.c | 32 ++++++++++++++++++++++----------
> 1 file changed, 22 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
> index ee47e6b..f5793b9 100644
> --- a/drivers/bus/arm-cci.c
> +++ b/drivers/bus/arm-cci.c
> @@ -667,6 +667,26 @@ static u32 pmu_get_max_counters(void)
> CCI_PMCR_NCNT_MASK) >> CCI_PMCR_NCNT_SHIFT;
> }
>
> +/* Should be called with cci_pmu->hw_events->pmu_lock held */
> +static void __cci_pmu_enable(void)
> +{
> + u32 val;
> +
> + /* Enable all the PMU counters. */
> + val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN;
> + writel(val, cci_ctrl_base + CCI_PMCR);
> +}
> +
> +/* Should be called with cci_pmu->hw_events->pmu_lock held */
> +static void __cci_pmu_disable(void)
> +{
> + u32 val;
> +
> + /* Disable all the PMU counters. */
> + val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN;
> + writel(val, cci_ctrl_base + CCI_PMCR);
> +}
> +
> static int pmu_get_event_idx(struct cci_pmu_hw_events *hw, struct perf_event *event)
> {
> struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
> @@ -880,16 +900,12 @@ static void cci_pmu_enable(struct pmu *pmu)
> struct cci_pmu_hw_events *hw_events = &cci_pmu->hw_events;
> int enabled = bitmap_weight(hw_events->used_mask, cci_pmu->num_cntrs);
> unsigned long flags;
> - u32 val;
>
> if (!enabled)
> return;
>
> raw_spin_lock_irqsave(&hw_events->pmu_lock, flags);
> -
> - /* Enable all the PMU counters. */
> - val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN;
> - writel(val, cci_ctrl_base + CCI_PMCR);
> + __cci_pmu_enable();
> raw_spin_unlock_irqrestore(&hw_events->pmu_lock, flags);
>
> }
> @@ -899,13 +915,9 @@ static void cci_pmu_disable(struct pmu *pmu)
> struct cci_pmu *cci_pmu = to_cci_pmu(pmu);
> struct cci_pmu_hw_events *hw_events = &cci_pmu->hw_events;
> unsigned long flags;
> - u32 val;
>
> raw_spin_lock_irqsave(&hw_events->pmu_lock, flags);
> -
> - /* Disable all the PMU counters. */
> - val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN;
> - writel(val, cci_ctrl_base + CCI_PMCR);
> + __cci_pmu_disable();
> raw_spin_unlock_irqrestore(&hw_events->pmu_lock, flags);
> }
>
> --
> 1.7.9.5
>
WARNING: multiple messages have this Message-ID (diff)
From: Mark Rutland <mark.rutland@arm.com>
To: "Suzuki K. Poulose" <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org, punit.agrawal@arm.com,
arm@kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCHv3 1/5] arm-cci: Refactor CCI PMU enable/disable methods
Date: Thu, 10 Dec 2015 15:26:08 +0000 [thread overview]
Message-ID: <20151210152608.GC495@leverpostej> (raw)
In-Reply-To: <1447783407-18027-2-git-send-email-suzuki.poulose@arm.com>
On Tue, Nov 17, 2015 at 06:03:23PM +0000, Suzuki K. Poulose wrote:
> This patch refactors the CCI PMU driver code a little bit to
> make it easier share the code for enabling/disabling the CCI
> PMU. This will be used by the hooks to work around the special cases
> where writing to a counter is not always that easy(e.g, CCI-500)
>
> No functional changes.
Looks sensible to me:
Acked-by: Mark Rutland <mark.rutland@arm.com>
Mark.
> Cc: Punit Agrawal <punit.agrawal@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
> ---
> drivers/bus/arm-cci.c | 32 ++++++++++++++++++++++----------
> 1 file changed, 22 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
> index ee47e6b..f5793b9 100644
> --- a/drivers/bus/arm-cci.c
> +++ b/drivers/bus/arm-cci.c
> @@ -667,6 +667,26 @@ static u32 pmu_get_max_counters(void)
> CCI_PMCR_NCNT_MASK) >> CCI_PMCR_NCNT_SHIFT;
> }
>
> +/* Should be called with cci_pmu->hw_events->pmu_lock held */
> +static void __cci_pmu_enable(void)
> +{
> + u32 val;
> +
> + /* Enable all the PMU counters. */
> + val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN;
> + writel(val, cci_ctrl_base + CCI_PMCR);
> +}
> +
> +/* Should be called with cci_pmu->hw_events->pmu_lock held */
> +static void __cci_pmu_disable(void)
> +{
> + u32 val;
> +
> + /* Disable all the PMU counters. */
> + val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN;
> + writel(val, cci_ctrl_base + CCI_PMCR);
> +}
> +
> static int pmu_get_event_idx(struct cci_pmu_hw_events *hw, struct perf_event *event)
> {
> struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
> @@ -880,16 +900,12 @@ static void cci_pmu_enable(struct pmu *pmu)
> struct cci_pmu_hw_events *hw_events = &cci_pmu->hw_events;
> int enabled = bitmap_weight(hw_events->used_mask, cci_pmu->num_cntrs);
> unsigned long flags;
> - u32 val;
>
> if (!enabled)
> return;
>
> raw_spin_lock_irqsave(&hw_events->pmu_lock, flags);
> -
> - /* Enable all the PMU counters. */
> - val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN;
> - writel(val, cci_ctrl_base + CCI_PMCR);
> + __cci_pmu_enable();
> raw_spin_unlock_irqrestore(&hw_events->pmu_lock, flags);
>
> }
> @@ -899,13 +915,9 @@ static void cci_pmu_disable(struct pmu *pmu)
> struct cci_pmu *cci_pmu = to_cci_pmu(pmu);
> struct cci_pmu_hw_events *hw_events = &cci_pmu->hw_events;
> unsigned long flags;
> - u32 val;
>
> raw_spin_lock_irqsave(&hw_events->pmu_lock, flags);
> -
> - /* Disable all the PMU counters. */
> - val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN;
> - writel(val, cci_ctrl_base + CCI_PMCR);
> + __cci_pmu_disable();
> raw_spin_unlock_irqrestore(&hw_events->pmu_lock, flags);
> }
>
> --
> 1.7.9.5
>
next prev parent reply other threads:[~2015-12-10 15:26 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-17 18:03 [PATCHv3 0/5] arm-cci500: Workaround pmu_event_set_period Suzuki K. Poulose
2015-11-17 18:03 ` Suzuki K. Poulose
2015-11-17 18:03 ` [PATCHv3 1/5] arm-cci: Refactor CCI PMU enable/disable methods Suzuki K. Poulose
2015-11-17 18:03 ` Suzuki K. Poulose
2015-12-10 15:26 ` Mark Rutland [this message]
2015-12-10 15:26 ` Mark Rutland
2015-11-17 18:03 ` [PATCHv3 2/5] arm-cci: Get the status of a counter Suzuki K. Poulose
2015-11-17 18:03 ` Suzuki K. Poulose
2015-12-10 15:33 ` Mark Rutland
2015-12-10 15:33 ` Mark Rutland
2015-11-17 18:03 ` [PATCHv3 3/5] arm-cci: Add routines to enable/disable all counters Suzuki K. Poulose
2015-11-17 18:03 ` Suzuki K. Poulose
2015-12-10 15:32 ` Mark Rutland
2015-12-10 15:32 ` Mark Rutland
2015-12-10 15:42 ` Suzuki K. Poulose
2015-12-10 15:42 ` Suzuki K. Poulose
2015-12-10 15:47 ` Mark Rutland
2015-12-10 15:47 ` Mark Rutland
2015-11-17 18:03 ` [PATCHv3 4/5] arm-cci: Add hooks for pmu_write_counter Suzuki K. Poulose
2015-11-17 18:03 ` Suzuki K. Poulose
2015-11-17 18:03 ` [PATCHv3 5/5] arm-cci: CCI-500: Work around PMU counter writes Suzuki K. Poulose
2015-11-17 18:03 ` Suzuki K. Poulose
2015-12-10 15:42 ` Mark Rutland
2015-12-10 15:42 ` Mark Rutland
2015-12-11 11:28 ` Suzuki K. Poulose
2015-12-11 11:28 ` Suzuki K. Poulose
2015-12-11 12:10 ` Peter Zijlstra
2015-12-11 12:10 ` Peter Zijlstra
2015-12-11 12:14 ` Mark Rutland
2015-12-11 12:14 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151210152608.GC495@leverpostej \
--to=mark.rutland@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.